[PATCH v2 3/3] arm64: dts: a3720: add support for espressobin with populated emmc

[Stefan Roese]

On 04.09.20 17:33, Andre Heider wrote:
> Import armada-3720-espressobin-emmc.dts from Linux, but use sdhc1 for
> emmc, since our dtsi is still based on downstream and sdhc0 is used for
> the sd card.
> 
> Signed-off-by: Andre Heider <a.heider at gmail.com>

Applied to u-boot-marvell/master

Thanks,
Stefan

> ---
>   arch/arm/dts/Makefile                         |  1 +
>   arch/arm/dts/armada-3720-espressobin-emmc.dts | 44 +++++++++++++++++++
>   doc/README.marvell                            |  7 ++-
>   3 files changed, 50 insertions(+), 2 deletions(-)
>   create mode 100644 arch/arm/dts/armada-3720-espressobin-emmc.dts
> 
> diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
> index 5e34192be6..8f1958b5a7 100644
> --- a/arch/arm/dts/Makefile
> +++ b/arch/arm/dts/Makefile
> @@ -202,6 +202,7 @@ dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \
>   dtb-$(CONFIG_ARCH_MVEBU) +=			\
>   	armada-3720-db.dtb			\
>   	armada-3720-espressobin.dtb		\
> +	armada-3720-espressobin-emmc.dtb	\
>   	armada-3720-turris-mox.dtb		\
>   	armada-3720-uDPU.dtb			\
>   	armada-375-db.dtb			\
> diff --git a/arch/arm/dts/armada-3720-espressobin-emmc.dts b/arch/arm/dts/armada-3720-espressobin-emmc.dts
> new file mode 100644
> index 0000000000..29ccb6a573
> --- /dev/null
> +++ b/arch/arm/dts/armada-3720-espressobin-emmc.dts
> @@ -0,0 +1,44 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Device Tree file for Globalscale Marvell ESPRESSOBin Board with eMMC
> + * Copyright (C) 2018 Marvell
> + *
> + * Romain Perier <romain.perier at free-electrons.com>
> + * Konstantin Porotchkin <kostap at marvell.com>
> + *
> + */
> +/*
> + * Schematic available at http://espressobin.net/wp-content/uploads/2017/08/ESPRESSObin_V5_Schematics.pdf
> + */
> +
> +/dts-v1/;
> +
> +#include "armada-3720-espressobin.dtsi"
> +
> +/ {
> +	model = "Globalscale Marvell ESPRESSOBin Board (eMMC)";
> +	compatible = "globalscale,espressobin-emmc", "globalscale,espressobin",
> +		     "marvell,armada3720", "marvell,armada3710";
> +};
> +
> +/* U11 */
> +&sdhci1 {
> +	non-removable;
> +	bus-width = <8>;
> +	mmc-ddr-1_8v;
> +	mmc-hs400-1_8v;
> +	marvell,xenon-emmc;
> +	marvell,xenon-tun-count = <9>;
> +	marvell,pad-type = "fixed-1-8v";
> +
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&mmc_pins>;
> +	status = "okay";
> +
> +	#address-cells = <1>;
> +	#size-cells = <0>;
> +	mmccard: mmccard at 0 {
> +		compatible = "mmc-card";
> +		reg = <0>;
> +	};
> +};
> diff --git a/doc/README.marvell b/doc/README.marvell
> index 5416bc3035..be07f31f8c 100644
> --- a/doc/README.marvell
> +++ b/doc/README.marvell
> @@ -43,8 +43,11 @@ Build Procedure
>           In order to prevent this, the required device-tree MUST be set during compilation.
>           All device-tree files are located in ./arch/arm/dts/ folder.
>   
> -	For other DB boards (MacchiatoBin, EspressoBin and 3700 DB board) compile u-boot with
> -	just default device-tree from defconfig using:
> +	For the EspressoBin board with populated eMMC device use
> +		# make DEVICE_TREE=armada-3720-espressobin-emmc
> +
> +	For other DB boards (MacchiatoBin, EspressoBin without soldered eMMC and 3700 DB board)
> +	compile u-boot with just default device-tree from defconfig using:
>   
>   		# make
>   
> 


Viele Grüße,
Stefan

-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: sr at denx.de