[PATCH] ARM: dts: stm32: Drop QSPI CS2 on DHCOM

[Patrice CHOTARD]

Hi Marek

On 10/28/20 9:37 PM, Marek Vasut wrote:
> The QSPI CS2 is not used on DHCOM, remove the pinmux and flash at 1.
>
> Signed-off-by: Marek Vasut <marex at denx.de>
> Cc: Patrice Chotard <patrice.chotard at st.com>
> Cc: Patrick Delaunay <patrick.delaunay at st.com>
> ---
>  arch/arm/dts/stm32mp15xx-dhcom.dtsi | 13 ++-----------
>  1 file changed, 2 insertions(+), 11 deletions(-)
>
> diff --git a/arch/arm/dts/stm32mp15xx-dhcom.dtsi b/arch/arm/dts/stm32mp15xx-dhcom.dtsi
> index 8782a3b78d..18c08c9435 100644
> --- a/arch/arm/dts/stm32mp15xx-dhcom.dtsi
> +++ b/arch/arm/dts/stm32mp15xx-dhcom.dtsi
> @@ -299,8 +299,8 @@
>  
>  &qspi {
>  	pinctrl-names = "default", "sleep";
> -	pinctrl-0 = <&qspi_clk_pins_a &qspi_bk1_pins_a &qspi_bk2_pins_a>;
> -	pinctrl-1 = <&qspi_clk_sleep_pins_a &qspi_bk1_sleep_pins_a &qspi_bk2_sleep_pins_a>;
> +	pinctrl-0 = <&qspi_clk_pins_a &qspi_bk1_pins_a>;
> +	pinctrl-1 = <&qspi_clk_sleep_pins_a &qspi_bk1_sleep_pins_a>;
>  	reg = <0x58003000 0x1000>, <0x70000000 0x4000000>;
>  	#address-cells = <1>;
>  	#size-cells = <0>;
> @@ -314,15 +314,6 @@
>  		#address-cells = <1>;
>  		#size-cells = <1>;
>  	};
> -
> -	flash1: mx66l51235l at 1 {
> -		compatible = "jedec,spi-nor";
> -		reg = <1>;
> -		spi-rx-bus-width = <4>;
> -		spi-max-frequency = <108000000>;
> -		#address-cells = <1>;
> -		#size-cells = <1>;
> -	};
>  };
>  
>  &rng1 {

Reviewed-by: Patrice Chotard <patrice.chotard at st.com>

Thanks

Patrice