[PATCH v1 7/9] verdin-imx8mm: spl: enable pca9450 i2c level translator

[Oleksandr Suvorov]

On Thu, Oct 29, 2020 at 4:49 PM Marcel Ziswiler
<marcel.ziswiler at toradex.com> wrote:
>
> On Wed, 2020-10-28 at 11:58 +0200, Igor Opaniuk wrote:
> > From: Max Krummenacher <max.krummenacher at toradex.com>
> >
> > Enable PCA9450 i2c level translator, as this is used for the
> > on module ADC.
> >
> > Signed-off-by: Max Krummenacher <max.krummenacher at toradex.com>
>
> Acked-by: Marcel Ziswiler <marcel.ziswiler at toradex.com>
Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov at toradex.com>
>
> > ---
> >
> >  board/toradex/verdin-imx8mm/spl.c | 2 ++
> >  1 file changed, 2 insertions(+)
> >
> > diff --git a/board/toradex/verdin-imx8mm/spl.c b/board/toradex/verdin-imx8mm/spl.c
> > index 9562cdeb35..72e2e09e25 100644
> > --- a/board/toradex/verdin-imx8mm/spl.c
> > +++ b/board/toradex/verdin-imx8mm/spl.c
> > @@ -124,6 +124,8 @@ int power_init_board(void)
> >                 /* set WDOG_B_CFG to cold reset */
> >                 pmic_reg_write(dev, PCA9450_RESET_CTRL, 0xA1);
> >
> > +               pmic_reg_write(dev, PCA9450_CONFIG2, 0x1);
> > +
> >                 return 0;
> >         }



-- 
Best regards
Oleksandr Suvorov

Toradex AG
Ebenaustrasse 10 | 6048 Horw | Switzerland | T: +41 41 500 48 00