[PATCH] ARM: dts: stm32mp1: DT alignment with Linux kernel v5.9-rc4
Patrice CHOTARD
patrice.chotard at st.com
Fri Oct 2 11:30:57 CEST 2020
Hi Patrick
On 9/16/20 10:01 AM, Patrick Delaunay wrote:
> DT alignment with Linux kernel v5.9-rc4 for the STM32MP15x soc
> device tree files and the STMicroelectronics boards device tree files.
>
> Signed-off-by: Patrick Delaunay <patrick.delaunay at st.com>
> ---
>
> arch/arm/dts/stm32mp15-pinctrl.dtsi | 263 ++++++++++++++++++++++++++--
> arch/arm/dts/stm32mp151.dtsi | 4 +-
> arch/arm/dts/stm32mp157a-dk1.dts | 2 +
> arch/arm/dts/stm32mp157c-dk2.dts | 11 ++
> arch/arm/dts/stm32mp157c-ed1.dts | 4 +-
> arch/arm/dts/stm32mp157c-ev1.dts | 15 ++
> arch/arm/dts/stm32mp15xx-dkx.dtsi | 38 +++-
> 7 files changed, 318 insertions(+), 19 deletions(-)
>
> diff --git a/arch/arm/dts/stm32mp15-pinctrl.dtsi b/arch/arm/dts/stm32mp15-pinctrl.dtsi
> index e9525b5d06..154832983c 100644
> --- a/arch/arm/dts/stm32mp15-pinctrl.dtsi
> +++ b/arch/arm/dts/stm32mp15-pinctrl.dtsi
> @@ -1573,6 +1573,20 @@
> };
> };
>
> + spi4_pins_a: spi4-0 {
> + pins {
> + pinmux = <STM32_PINMUX('E', 12, AF5)>, /* SPI4_SCK */
> + <STM32_PINMUX('E', 6, AF5)>; /* SPI4_MOSI */
> + bias-disable;
> + drive-push-pull;
> + slew-rate = <1>;
> + };
> + pins2 {
> + pinmux = <STM32_PINMUX('E', 13, AF5)>; /* SPI4_MISO */
> + bias-disable;
> + };
> + };
> +
> stusb1600_pins_a: stusb1600-0 {
> pins {
> pinmux = <STM32_PINMUX('I', 11, ANALOG)>;
> @@ -1580,6 +1594,133 @@
> };
> };
>
> + uart4_pins_a: uart4-0 {
> + pins1 {
> + pinmux = <STM32_PINMUX('G', 11, AF6)>; /* UART4_TX */
> + bias-disable;
> + drive-push-pull;
> + slew-rate = <0>;
> + };
> + pins2 {
> + pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
> + bias-disable;
> + };
> + };
> +
> + uart4_idle_pins_a: uart4-idle-0 {
> + pins1 {
> + pinmux = <STM32_PINMUX('G', 11, ANALOG)>; /* UART4_TX */
> + };
> + pins2 {
> + pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
> + bias-disable;
> + };
> + };
> +
> + uart4_sleep_pins_a: uart4-sleep-0 {
> + pins {
> + pinmux = <STM32_PINMUX('G', 11, ANALOG)>, /* UART4_TX */
> + <STM32_PINMUX('B', 2, ANALOG)>; /* UART4_RX */
> + };
> + };
> +
> + uart4_pins_b: uart4-1 {
> + pins1 {
> + pinmux = <STM32_PINMUX('D', 1, AF8)>; /* UART4_TX */
> + bias-disable;
> + drive-push-pull;
> + slew-rate = <0>;
> + };
> + pins2 {
> + pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
> + bias-disable;
> + };
> + };
> +
> + uart4_pins_c: uart4-2 {
> + pins1 {
> + pinmux = <STM32_PINMUX('G', 11, AF6)>; /* UART4_TX */
> + bias-disable;
> + drive-push-pull;
> + slew-rate = <0>;
> + };
> + pins2 {
> + pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
> + bias-disable;
> + };
> + };
> +
> + uart7_pins_a: uart7-0 {
> + pins1 {
> + pinmux = <STM32_PINMUX('E', 8, AF7)>; /* UART7_TX */
> + bias-disable;
> + drive-push-pull;
> + slew-rate = <0>;
> + };
> + pins2 {
> + pinmux = <STM32_PINMUX('E', 7, AF7)>, /* UART7_RX */
> + <STM32_PINMUX('E', 10, AF7)>, /* UART7_CTS */
> + <STM32_PINMUX('E', 9, AF7)>; /* UART7_RTS */
> + bias-disable;
> + };
> + };
> +
> + uart7_pins_b: uart7-1 {
> + pins1 {
> + pinmux = <STM32_PINMUX('F', 7, AF7)>; /* UART7_TX */
> + bias-disable;
> + drive-push-pull;
> + slew-rate = <0>;
> + };
> + pins2 {
> + pinmux = <STM32_PINMUX('F', 6, AF7)>; /* UART7_RX */
> + bias-disable;
> + };
> + };
> +
> + uart7_pins_c: uart7-2 {
> + pins1 {
> + pinmux = <STM32_PINMUX('E', 8, AF7)>; /* UART7_TX */
> + bias-disable;
> + drive-push-pull;
> + slew-rate = <0>;
> + };
> + pins2 {
> + pinmux = <STM32_PINMUX('E', 7, AF7)>; /* UART7_RX */
> + bias-disable;
> + };
> + };
> +
> + uart7_idle_pins_c: uart7-idle-2 {
> + pins1 {
> + pinmux = <STM32_PINMUX('E', 8, ANALOG)>; /* UART7_TX */
> + };
> + pins2 {
> + pinmux = <STM32_PINMUX('E', 7, AF7)>; /* UART7_RX */
> + bias-disable;
> + };
> + };
> +
> + uart7_sleep_pins_c: uart7-sleep-2 {
> + pins {
> + pinmux = <STM32_PINMUX('E', 8, ANALOG)>, /* UART7_TX */
> + <STM32_PINMUX('E', 7, ANALOG)>; /* UART7_RX */
> + };
> + };
> +
> + uart8_pins_a: uart8-0 {
> + pins1 {
> + pinmux = <STM32_PINMUX('E', 1, AF8)>; /* UART8_TX */
> + bias-disable;
> + drive-push-pull;
> + slew-rate = <0>;
> + };
> + pins2 {
> + pinmux = <STM32_PINMUX('E', 0, AF8)>; /* UART8_RX */
> + bias-disable;
> + };
> + };
> +
> usart2_pins_a: usart2-0 {
> pins1 {
> pinmux = <STM32_PINMUX('F', 5, AF7)>, /* USART2_TX */
> @@ -1628,6 +1769,42 @@
> };
> };
>
> + usart2_pins_c: usart2-2 {
> + pins1 {
> + pinmux = <STM32_PINMUX('D', 5, AF7)>, /* USART2_TX */
> + <STM32_PINMUX('D', 4, AF7)>; /* USART2_RTS */
> + bias-disable;
> + drive-push-pull;
> + slew-rate = <3>;
> + };
> + pins2 {
> + pinmux = <STM32_PINMUX('D', 6, AF7)>, /* USART2_RX */
> + <STM32_PINMUX('D', 3, AF7)>; /* USART2_CTS_NSS */
> + bias-disable;
> + };
> + };
> +
> + usart2_idle_pins_c: usart2-idle-2 {
> + pins1 {
> + pinmux = <STM32_PINMUX('D', 5, ANALOG)>, /* USART2_TX */
> + <STM32_PINMUX('D', 4, ANALOG)>, /* USART2_RTS */
> + <STM32_PINMUX('D', 3, ANALOG)>; /* USART2_CTS_NSS */
> + };
> + pins2 {
> + pinmux = <STM32_PINMUX('D', 6, AF7)>; /* USART2_RX */
> + bias-disable;
> + };
> + };
> +
> + usart2_sleep_pins_c: usart2-sleep-2 {
> + pins {
> + pinmux = <STM32_PINMUX('D', 5, ANALOG)>, /* USART2_TX */
> + <STM32_PINMUX('D', 4, ANALOG)>, /* USART2_RTS */
> + <STM32_PINMUX('D', 6, ANALOG)>, /* USART2_RX */
> + <STM32_PINMUX('D', 3, ANALOG)>; /* USART2_CTS_NSS */
> + };
> + };
> +
> usart3_pins_a: usart3-0 {
> pins1 {
> pinmux = <STM32_PINMUX('B', 10, AF7)>; /* USART3_TX */
> @@ -1641,6 +1818,78 @@
> };
> };
>
> + usart3_pins_b: usart3-1 {
> + pins1 {
> + pinmux = <STM32_PINMUX('B', 10, AF7)>, /* USART3_TX */
> + <STM32_PINMUX('G', 8, AF8)>; /* USART3_RTS */
> + bias-disable;
> + drive-push-pull;
> + slew-rate = <0>;
> + };
> + pins2 {
> + pinmux = <STM32_PINMUX('B', 12, AF8)>, /* USART3_RX */
> + <STM32_PINMUX('I', 10, AF8)>; /* USART3_CTS_NSS */
> + bias-disable;
> + };
> + };
> +
> + usart3_idle_pins_b: usart3-idle-1 {
> + pins1 {
> + pinmux = <STM32_PINMUX('B', 10, ANALOG)>, /* USART3_TX */
> + <STM32_PINMUX('G', 8, ANALOG)>, /* USART3_RTS */
> + <STM32_PINMUX('I', 10, ANALOG)>; /* USART3_CTS_NSS */
> + };
> + pins2 {
> + pinmux = <STM32_PINMUX('B', 12, AF8)>; /* USART3_RX */
> + bias-disable;
> + };
> + };
> +
> + usart3_sleep_pins_b: usart3-sleep-1 {
> + pins {
> + pinmux = <STM32_PINMUX('B', 10, ANALOG)>, /* USART3_TX */
> + <STM32_PINMUX('G', 8, ANALOG)>, /* USART3_RTS */
> + <STM32_PINMUX('I', 10, ANALOG)>, /* USART3_CTS_NSS */
> + <STM32_PINMUX('B', 12, ANALOG)>; /* USART3_RX */
> + };
> + };
> +
> + usart3_pins_c: usart3-2 {
> + pins1 {
> + pinmux = <STM32_PINMUX('B', 10, AF7)>, /* USART3_TX */
> + <STM32_PINMUX('G', 8, AF8)>; /* USART3_RTS */
> + bias-disable;
> + drive-push-pull;
> + slew-rate = <0>;
> + };
> + pins2 {
> + pinmux = <STM32_PINMUX('B', 12, AF8)>, /* USART3_RX */
> + <STM32_PINMUX('B', 13, AF7)>; /* USART3_CTS_NSS */
> + bias-disable;
> + };
> + };
> +
> + usart3_idle_pins_c: usart3-idle-2 {
> + pins1 {
> + pinmux = <STM32_PINMUX('B', 10, ANALOG)>, /* USART3_TX */
> + <STM32_PINMUX('G', 8, ANALOG)>, /* USART3_RTS */
> + <STM32_PINMUX('B', 13, ANALOG)>; /* USART3_CTS_NSS */
> + };
> + pins2 {
> + pinmux = <STM32_PINMUX('B', 12, AF8)>; /* USART3_RX */
> + bias-disable;
> + };
> + };
> +
> + usart3_sleep_pins_c: usart3-sleep-2 {
> + pins {
> + pinmux = <STM32_PINMUX('B', 10, ANALOG)>, /* USART3_TX */
> + <STM32_PINMUX('G', 8, ANALOG)>, /* USART3_RTS */
> + <STM32_PINMUX('B', 13, ANALOG)>, /* USART3_CTS_NSS */
> + <STM32_PINMUX('B', 12, ANALOG)>; /* USART3_RX */
> + };
> + };
> +
> uart4_pins_a: uart4-0 {
> pins1 {
> pinmux = <STM32_PINMUX('G', 11, AF6)>; /* UART4_TX */
> @@ -1782,18 +2031,4 @@
> bias-disable;
> };
> };
> -
> - spi4_pins_a: spi4-0 {
> - pins {
> - pinmux = <STM32_PINMUX('E', 12, AF5)>, /* SPI4_SCK */
> - <STM32_PINMUX('E', 6, AF5)>; /* SPI4_MOSI */
> - bias-disable;
> - drive-push-pull;
> - slew-rate = <1>;
> - };
> - pins2 {
> - pinmux = <STM32_PINMUX('E', 13, AF5)>; /* SPI4_MISO */
> - bias-disable;
> - };
> - };
> };
> diff --git a/arch/arm/dts/stm32mp151.dtsi b/arch/arm/dts/stm32mp151.dtsi
> index 39d9e545ed..206d3d3c78 100644
> --- a/arch/arm/dts/stm32mp151.dtsi
> +++ b/arch/arm/dts/stm32mp151.dtsi
> @@ -1153,7 +1153,7 @@
> };
>
> pwr_mcu: pwr_mcu at 50001014 {
> - compatible = "syscon";
> + compatible = "st,stm32mp151-pwr-mcu", "syscon";
> reg = <0x50001014 0x4>;
> };
>
> @@ -1372,6 +1372,8 @@
> dma-names = "tx", "rx";
> clocks = <&rcc QSPI_K>;
> resets = <&rcc QSPI_R>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> status = "disabled";
> };
>
> diff --git a/arch/arm/dts/stm32mp157a-dk1.dts b/arch/arm/dts/stm32mp157a-dk1.dts
> index d03d4cd260..4c8be9c8eb 100644
> --- a/arch/arm/dts/stm32mp157a-dk1.dts
> +++ b/arch/arm/dts/stm32mp157a-dk1.dts
> @@ -18,6 +18,8 @@
> aliases {
> ethernet0 = ðernet0;
> serial0 = &uart4;
> + serial1 = &usart3;
> + serial2 = &uart7;
> };
>
> chosen {
> diff --git a/arch/arm/dts/stm32mp157c-dk2.dts b/arch/arm/dts/stm32mp157c-dk2.dts
> index 9a8a26710a..045636555d 100644
> --- a/arch/arm/dts/stm32mp157c-dk2.dts
> +++ b/arch/arm/dts/stm32mp157c-dk2.dts
> @@ -19,6 +19,9 @@
> aliases {
> ethernet0 = ðernet0;
> serial0 = &uart4;
> + serial1 = &usart3;
> + serial2 = &uart7;
> + serial3 = &usart2;
> };
>
> chosen {
> @@ -84,3 +87,11 @@
> };
> };
> };
> +
> +&usart2 {
> + pinctrl-names = "default", "sleep", "idle";
> + pinctrl-0 = <&usart2_pins_c>;
> + pinctrl-1 = <&usart2_sleep_pins_c>;
> + pinctrl-2 = <&usart2_idle_pins_c>;
> + status = "disabled";
> +};
> diff --git a/arch/arm/dts/stm32mp157c-ed1.dts b/arch/arm/dts/stm32mp157c-ed1.dts
> index 072d646379..dd911c9932 100644
> --- a/arch/arm/dts/stm32mp157c-ed1.dts
> +++ b/arch/arm/dts/stm32mp157c-ed1.dts
> @@ -361,8 +361,10 @@
> };
>
> &uart4 {
> - pinctrl-names = "default";
> + pinctrl-names = "default", "sleep", "idle";
> pinctrl-0 = <&uart4_pins_a>;
> + pinctrl-1 = <&uart4_sleep_pins_a>;
> + pinctrl-2 = <&uart4_idle_pins_a>;
> status = "okay";
> };
>
> diff --git a/arch/arm/dts/stm32mp157c-ev1.dts b/arch/arm/dts/stm32mp157c-ev1.dts
> index 46f81ce92e..a55e80ce26 100644
> --- a/arch/arm/dts/stm32mp157c-ev1.dts
> +++ b/arch/arm/dts/stm32mp157c-ev1.dts
> @@ -19,6 +19,7 @@
>
> aliases {
> serial0 = &uart4;
> + serial1 = &usart3;
> ethernet0 = ðernet0;
> };
>
> @@ -343,6 +344,20 @@
> };
> };
>
> +&usart3 {
> + pinctrl-names = "default", "sleep", "idle";
> + pinctrl-0 = <&usart3_pins_b>;
> + pinctrl-1 = <&usart3_sleep_pins_b>;
> + pinctrl-2 = <&usart3_idle_pins_b>;
> + /*
> + * HW flow control USART3_RTS is optional, and isn't default wired to
> + * the connector. SB23 needs to be soldered in order to use it, and R77
> + * (ETH_CLK) should be removed.
> + */
> + uart-has-rtscts;
> + status = "disabled";
> +};
> +
> &usbh_ehci {
> phys = <&usbphyc_port0>;
> status = "okay";
> diff --git a/arch/arm/dts/stm32mp15xx-dkx.dtsi b/arch/arm/dts/stm32mp15xx-dkx.dtsi
> index d660dfb74e..aa4aa83e05 100644
> --- a/arch/arm/dts/stm32mp15xx-dkx.dtsi
> +++ b/arch/arm/dts/stm32mp15xx-dkx.dtsi
> @@ -62,7 +62,7 @@
>
> led {
> compatible = "gpio-leds";
> - blue {
> + led-blue {
> label = "heartbeat";
> gpios = <&gpiod 11 GPIO_ACTIVE_HIGH>;
> linux,default-trigger = "heartbeat";
> @@ -391,6 +391,19 @@
> };
> };
>
> +&i2c5 {
> + pinctrl-names = "default", "sleep";
> + pinctrl-0 = <&i2c5_pins_a>;
> + pinctrl-1 = <&i2c5_sleep_pins_a>;
> + i2c-scl-rising-time-ns = <185>;
> + i2c-scl-falling-time-ns = <20>;
> + clock-frequency = <400000>;
> + /* spare dmas for other usage */
> + /delete-property/dmas;
> + /delete-property/dma-names;
> + status = "disabled";
> +};
> +
> &i2s2 {
> clocks = <&rcc SPI2>, <&rcc SPI2_K>, <&rcc PLL3_Q>, <&rcc PLL3_R>;
> clock-names = "pclk", "i2sclk", "x8k", "x11k";
> @@ -610,20 +623,39 @@
> };
>
> &uart4 {
> - pinctrl-names = "default";
> + pinctrl-names = "default", "sleep", "idle";
> pinctrl-0 = <&uart4_pins_a>;
> + pinctrl-1 = <&uart4_sleep_pins_a>;
> + pinctrl-2 = <&uart4_idle_pins_a>;
> status = "okay";
> };
>
> +&uart7 {
> + pinctrl-names = "default", "sleep", "idle";
> + pinctrl-0 = <&uart7_pins_c>;
> + pinctrl-1 = <&uart7_sleep_pins_c>;
> + pinctrl-2 = <&uart7_idle_pins_c>;
> + status = "disabled";
> +};
> +
> +&usart3 {
> + pinctrl-names = "default", "sleep", "idle";
> + pinctrl-0 = <&usart3_pins_c>;
> + pinctrl-1 = <&usart3_sleep_pins_c>;
> + pinctrl-2 = <&usart3_idle_pins_c>;
> + uart-has-rtscts;
> + status = "disabled";
> +};
> +
> &usbh_ehci {
> phys = <&usbphyc_port0>;
> status = "okay";
> };
>
> &usbotg_hs {
> - dr_mode = "peripheral";
> phys = <&usbphyc_port1 0>;
> phy-names = "usb2-phy";
> + usb-role-switch;
> status = "okay";
> };
>
Reviewed-by: Patrice Chotard <patrice.chotard at st.com>
Thanks
More information about the U-Boot
mailing list