[PATCH v2 6/6] arm: dts: ls1088a: change dwc3 compatible to match dwc3-generic driver

[Ran Wang]

Benefit is, besides host mode, now user can choose device mode with
setting of dr_mode = “peripheral”;

Signed-off-by: Ran Wang <ran.wang_1 at nxp.com>
---
Change in v2:
 - Remove property 'snps,dis_rxdet_inp3_quirk' due to its side effect to Linux
   kernel (USB device no detected) 

 arch/arm/dts/fsl-ls1088a.dtsi | 38 ++++++++++++++++++++++++++++----------
 1 file changed, 28 insertions(+), 10 deletions(-)

diff --git a/arch/arm/dts/fsl-ls1088a.dtsi b/arch/arm/dts/fsl-ls1088a.dtsi
index 6653794..9d4f40c 100644
--- a/arch/arm/dts/fsl-ls1088a.dtsi
+++ b/arch/arm/dts/fsl-ls1088a.dtsi
@@ -121,18 +121,36 @@
 		interrupts = <0 21 0x4>; /* Level high type */
 	};
 
-	usb0: usb3 at 3100000 {
-		compatible = "fsl,layerscape-dwc3";
-		reg = <0x0 0x3100000 0x0 0x10000>;
-		interrupts = <0 80 0x4>; /* Level high type */
-		dr_mode = "host";
+	usb0: usb at 3100000 {
+		compatible = "nxp,layerscape-dwc3";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		dwc3 {
+			compatible = "snps,dwc3";
+			reg = <0x0 0x3100000 0x0 0x10000>;
+			interrupts = <0 80 0x4>; /* Level high type */
+			dr_mode = "host";
+			maximum-speed = "super-speed";
+			snps,quirk-frame-length-adjustment = <0x20>;
+			snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
+		};
 	};
 
-	usb1: usb3 at 3110000 {
-		compatible = "fsl,layerscape-dwc3";
-		reg = <0x0 0x3110000 0x0 0x10000>;
-		interrupts = <0 81 0x4>; /* Level high type */
-		dr_mode = "host";
+	usb1: usb at 3110000 {
+		compatible = "nxp,layerscape-dwc3";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		dwc3 {
+			compatible = "snps,dwc3";
+			reg = <0x0 0x3110000 0x0 0x10000>;
+			interrupts = <0 81 0x4>; /* Level high type */
+			dr_mode = "host";
+			maximum-speed = "super-speed";
+			snps,quirk-frame-length-adjustment = <0x20>;
+			snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
+		};
 	};
 
 	pcie at 3400000 {
-- 
2.7.4