[PATCH] stm32mp: stm32prog: accept device without partition

[Patrick Delaunay]

When partitions are not available on a device the command stm32prog raises
an error but a device can have no partition to check in init_device()
and the command need to continue to the next part_id.

This patch correct an issue for ram0 target, when block_dev and mtd
are NULL.

For example with the simple flashlayout file:

Opt	Part	Name	Type	Device	Offset	Binary
-	0x01	fsbl	Binary	none	0x0	tf-a-serialboot.stm32
-	0x03	ssbl	Binary	none	0x0	u-boot.stm32
P	0x10	kernel	System	ram0	0xC2000000	uImage.bin
P	0x11	dtb	FileSytem	ram0	0xC4000000	stm32mp157f-ev1.dtb

Fixes: ffc405e63b94 ("stm32mp: stm32prog: add upport of partial update")
Signed-off-by: Patrick Delaunay <patrick.delaunay at st.com>
---

 arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog.c b/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog.c
index ec3355d816..a777827c55 100644
--- a/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog.c
+++ b/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog.c
@@ -768,9 +768,8 @@ static int init_device(struct stm32prog_data *data,
 			part_found = true;
 		}
 
+		/* no partition for this device */
 		if (!part_found) {
-			stm32prog_err("%s (0x%x): Invalid partition",
-				      part->name, part->id);
 			pr_debug("\n");
 			continue;
 		}
-- 
2.17.1