[v2, 1/2] mmc: fsl_esdhc: set sysctl register for clock initialization

[Yangbo Lu]

The initial clock setting should be through sysctl register only,
while the mmc_set_clock() will call mmc_set_ios() introduce other
configurations like bus width, mode, and so on.

Signed-off-by: Yangbo Lu <yangbo.lu at nxp.com>
Reviewed-by: Jaehoon Chung <jh80.chung at samsung.com>
---
Changes for v2:
	- Added "Reviewed-by".
---
 drivers/mmc/fsl_esdhc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c
index 642784e..68130ee 100644
--- a/drivers/mmc/fsl_esdhc.c
+++ b/drivers/mmc/fsl_esdhc.c
@@ -715,7 +715,7 @@ static int esdhc_init_common(struct fsl_esdhc_priv *priv, struct mmc *mmc)
 	esdhc_setbits32(&regs->sysctl, SYSCTL_HCKEN | SYSCTL_IPGEN);
 
 	/* Set the initial clock speed */
-	mmc_set_clock(mmc, 400000, MMC_CLK_ENABLE);
+	set_sysctl(priv, mmc, 400000);
 
 	/* Disable the BRR and BWR bits in IRQSTAT */
 	esdhc_clrbits32(&regs->irqstaten, IRQSTATEN_BRR | IRQSTATEN_BWR);
-- 
2.7.4