i.MX RT1050 toolchain

[Giulio Benetti]

On 10/17/20 2:53 PM, Andy Pont wrote:
> Giulio wrote...
>>> Is there a preferred / recommended toolchain for building U-Boot for the
>>> i.MX RT10xx platforms or should any recent ARM cross compiler work?
>> It should compile fine with any recent ARM cross-compiler.
>> Please let me know if it builds correctly
> I used the arm-linux-gnueabi-gcc v10.1.0 compiler available from 
> www.kernel.org and it has built fine. Now I have a working toolchain I 
> can start adding the new board.

Perfect, I suggest you to test it on a EVK before than going with your
custom board if you can, and after port your board, that should make it
easier.

Kind regards
-- 
Giulio Benetti
Benetti Engineering sas