[PATCH 1/2] pinctrl: k210: Fix inverted IE and OE for I2C

[Sean Anderson]

I2C and SCCB previously shared defaults. However, SCCB needs OE_INV and
IE_INV set, but I2C cannot have those bits set. This adds a separate
default for SCCB.

Signed-off-by: Sean Anderson <seanga2 at gmail.com>
Reported-by: Damien Le Moal <Damien.LeMoal at wdc.com>
---

 drivers/pinctrl/pinctrl-kendryte.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/drivers/pinctrl/pinctrl-kendryte.c b/drivers/pinctrl/pinctrl-kendryte.c
index 5ad049d955..259a0b507b 100644
--- a/drivers/pinctrl/pinctrl-kendryte.c
+++ b/drivers/pinctrl/pinctrl-kendryte.c
@@ -55,8 +55,9 @@
 
 #define K210_PC_MODE_IN   (K210_PC_IE | K210_PC_ST)
 #define K210_PC_MODE_OUT  (K210_PC_DRIVE_7 | K210_PC_OE)
-#define K210_PC_MODE_I2C  (K210_PC_MODE_IN | K210_PC_IE_INV | K210_PC_SL | \
-			   K210_PC_OE | K210_PC_OE_INV | K210_PC_PU)
+#define K210_PC_MODE_I2C  (K210_PC_MODE_IN | K210_PC_SL | K210_PC_OE | \
+			   K210_PC_PU)
+#define K210_PC_MODE_SCCB (K210_PC_MODE_I2C | K210_PC_OE_INV | K210_PC_IE_INV)
 #define K210_PC_MODE_SPI  (K210_PC_MODE_IN | K210_PC_IE_INV | \
 			   K210_PC_MODE_OUT | K210_PC_OE_INV)
 #define K210_PC_MODE_GPIO (K210_PC_MODE_IN | K210_PC_MODE_OUT)
@@ -189,6 +190,7 @@ static const u32 k210_pc_mode_id_to_mode[] = {
 	[K210_PC_DEFAULT_IN_TIE] = K210_PC_MODE_IN,
 	DEFAULT(OUT),
 	DEFAULT(I2C),
+	DEFAULT(SCCB),
 	DEFAULT(SPI),
 	DEFAULT(GPIO),
 	[K210_PC_DEFAULT_INT13] = K210_PC_MODE_IN | K210_PC_PU,
@@ -362,8 +364,8 @@ static const struct k210_pcf_info k210_pcf_infos[] = {
 	FUNC(DVP_D5,         IN),
 	FUNC(DVP_D6,         IN),
 	FUNC(DVP_D7,         IN),
-	FUNC(SCCB_SCLK,      I2C),
-	FUNC(SCCB_SDA,       I2C),
+	FUNC(SCCB_SCLK,      SCCB),
+	FUNC(SCCB_SDA,       SCCB),
 	FUNC(UART1_CTS,      IN),
 	FUNC(UART1_DSR,      IN),
 	FUNC(UART1_DCD,      IN),
-- 
2.28.0