[PATCH] mx6: peripheral clock from oscillator

[Jorge Ramirez-Ortiz, Foundries]

On 22/10/20, Fabio Estevam wrote:
> On Mon, Oct 19, 2020 at 11:23 AM Jorge Ramirez-Ortiz <jorge at foundries.io> wrote:
> >
> > In order to be able to run the I2C bus at 400Khz, the chip errata[1]
> > recommends that the peripheral clock runs out of the 24MHz oscillator.
> 
> I would suggest adding the optee related motivation that you explained
> earlier here in the commit log too.

sure, will do.

> 
> > [1] Rev 2, 10/2019, ERR007805
> 
> Not clear what document this refers to.

um, weird, I just googled "imx Rev 2, 10/2019, ERR007805" and it showed
the document and a link to the errata.

how do you tipically do this otherwise? I didnt want to depend on
links that migh break in the future.

> 
> >         /* Set perclk to source from OSC 24MHz */
> > -       if (is_mx6sl())
> > +       if (is_mx6sl() || ERRATA_ERR007805)
> 
> This gives the impression that imx6sl is not affected by the erratum,
> but in fact it is:
> https://www.nxp.com/docs/en/errata/IMX6SLCE.pdf
> 
> You could define it like this:
> 
> #define has_err007805() (is_mx6sl() || is_mx6dl() || is_mx6solo() ||
> is_mx6ull())


sounds good. will do (I didnt know the reason for the mx6sl configuring the
clock was that same errata)