[PATCH 1/7] board: atmel: sam9x60ek: add SYS_MALLOC_F_LEN to SYS_INIT_SP_ADDR

Claudiu Beznea claudiu.beznea at microchip.com
Mon Oct 5 16:58:37 CEST 2020


Heap base address is computed based on SYS_INIT_SP_ADDR by
subtracting the SYS_MALLOC_F_LEN value in
board_init_f_init_reserve().

Signed-off-by: Claudiu Beznea <claudiu.beznea at microchip.com>
---
 include/configs/sam9x60ek.h | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/include/configs/sam9x60ek.h b/include/configs/sam9x60ek.h
index 19714402ca45..6a6f1de41d1e 100644
--- a/include/configs/sam9x60ek.h
+++ b/include/configs/sam9x60ek.h
@@ -40,7 +40,8 @@
 #define CONFIG_SYS_SDRAM_SIZE		0x10000000	/* 256 megs */
 
 #define CONFIG_SYS_INIT_SP_ADDR \
-	(CONFIG_SYS_SDRAM_BASE + 16 * 1024 - GENERATED_GBL_DATA_SIZE)
+	(CONFIG_SYS_SDRAM_BASE + 16 * 1024 + CONFIG_SYS_MALLOC_F_LEN - \
+	 GENERATED_GBL_DATA_SIZE)
 
 /* NAND flash */
 #ifdef CONFIG_CMD_NAND
-- 
2.7.4



More information about the U-Boot mailing list