[PATCH v3 10/12] binman: Allow selecting default FIT configuration

Simon Glass sjg at chromium.org
Tue Sep 1 13:14:03 CEST 2020


Add a new entry argument to the fit entry which allows selection of the
default configuration to use. This is the 'default' property in the
'configurations' node.

Update the Makefile to pass in the value of DEVICE_TREE or
CONFIG_DEFAULT_DEVICE_TREE to provide this information.

Signed-off-by: Simon Glass <sjg at chromium.org>
Suggested-by: Michal Simek <michal.simek at xilinx.com>
---

Changes in v3:
- Rebase on top of earlier binman series

Changes in v2:
- Add new patch to allow selecting default FIT configuration

 Makefile                                      |  2 +
 tools/binman/README.entries                   |  4 ++
 tools/binman/etype/fit.py                     | 22 ++++++++++
 tools/binman/ftest.py                         | 41 +++++++++++++++++--
 .../test/{170_fit_fdt.dts => 172_fit_fdt.dts} |  2 +-
 5 files changed, 67 insertions(+), 4 deletions(-)
 rename tools/binman/test/{170_fit_fdt.dts => 172_fit_fdt.dts} (95%)

diff --git a/Makefile b/Makefile
index 65024c74089..fcc559ce7fa 100644
--- a/Makefile
+++ b/Makefile
@@ -1321,6 +1321,7 @@ u-boot.ldr:	u-boot
 # binman
 # ---------------------------------------------------------------------------
 # Use 'make BINMAN_DEBUG=1' to enable debugging
+default_dt := $(if $(DEVICE_TREE),$(DEVICE_TREE),$(CONFIG_DEFAULT_DEVICE_TREE))
 quiet_cmd_binman = BINMAN  $@
 cmd_binman = $(srctree)/tools/binman/binman $(if $(BINMAN_DEBUG),-D) \
                 --toolpath $(objtree)/tools \
@@ -1329,6 +1330,7 @@ cmd_binman = $(srctree)/tools/binman/binman $(if $(BINMAN_DEBUG),-D) \
 		-I . -I $(srctree) -I $(srctree)/board/$(BOARDDIR) \
 		-I arch/$(ARCH)/dts -a of-list=$(CONFIG_OF_LIST) \
 		-a atf-bl31-path=${BL31} \
+		-a default-dt=$(default_dt) \
 		$(BINMAN_$(@F))
 
 OBJCOPYFLAGS_u-boot.ldr.hex := -I binary -O ihex
diff --git a/tools/binman/README.entries b/tools/binman/README.entries
index d2628dffd5d..c1d436563e8 100644
--- a/tools/binman/README.entries
+++ b/tools/binman/README.entries
@@ -402,6 +402,10 @@ Available substitutions for '@' nodes are:
 Note that if no devicetree files are provided (with '-a of-list' as above)
 then no nodes will be generated.
 
+The 'default' property, if present, will be automatically set to the name
+if of configuration whose devicetree matches the 'default-dt' entry
+argument, e.g. with '-a default-dt=sun50i-a64-pine64-lts'.
+
 
 Properties (in the 'fit' node itself):
     fit,external-offset: Indicates that the contents of the FIT are external
diff --git a/tools/binman/etype/fit.py b/tools/binman/etype/fit.py
index c291eb26bad..bf73bfb9a56 100644
--- a/tools/binman/etype/fit.py
+++ b/tools/binman/etype/fit.py
@@ -90,6 +90,10 @@ class Entry_fit(Entry):
     Note that if no devicetree files are provided (with '-a of-list' as above)
     then no nodes will be generated.
 
+    The 'default' property, if present, will be automatically set to the name
+    if of configuration whose devicetree matches the 'default-dt' entry
+    argument, e.g. with '-a default-dt=sun50i-a64-pine64-lts'.
+
 
     Properties (in the 'fit' node itself):
         fit,external-offset: Indicates that the contents of the FIT are external
@@ -121,6 +125,8 @@ class Entry_fit(Entry):
                 [EntryArg(self._fit_list_prop.value, str)])
             if fdts is not None:
                 self._fdts = fdts.split()
+        self._fit_default_dt = self.GetEntryArgsOrProps([EntryArg('default-dt',
+                                                                  str)])[0]
 
     def ReadNode(self):
         self._ReadSubnodes()
@@ -142,6 +148,22 @@ class Entry_fit(Entry):
             """
             for pname, prop in node.props.items():
                 if not pname.startswith('fit,'):
+                    if pname == 'default':
+                        val = prop.value
+                        # Handle the 'default' property
+                        if val.startswith('@'):
+                            if not self._fdts:
+                                continue
+                            if not self._fit_default_dt:
+                                self.Raise("Generated 'default' node requires default-dt entry argument")
+                            if self._fit_default_dt not in self._fdts:
+                                self.Raise("default-dt entry argument '%s' not found in fdt list: %s" %
+                                           (self._fit_default_dt,
+                                            ', '.join(self._fdts)))
+                            seq = self._fdts.index(self._fit_default_dt)
+                            val = val[1:].replace('DEFAULT-SEQ', str(seq + 1))
+                            fsw.property_string(pname, val)
+                            continue
                     fsw.property(pname, prop.bytes)
 
             rel_path = node.path[len(base_node.path):]
diff --git a/tools/binman/ftest.py b/tools/binman/ftest.py
index 78d0e9c2b93..a269a7497cb 100644
--- a/tools/binman/ftest.py
+++ b/tools/binman/ftest.py
@@ -3602,7 +3602,7 @@ class TestFunctional(unittest.TestCase):
             """
             cnode = dtb.GetNode('/configurations')
             self.assertIn('default', cnode.props)
-            self.assertEqual('config-1', cnode.props['default'].value)
+            self.assertEqual('config-2', cnode.props['default'].value)
 
             name = 'config-%d' % seq
             fnode = dtb.GetNode('/configurations/%s' % name)
@@ -3615,9 +3615,10 @@ class TestFunctional(unittest.TestCase):
 
         entry_args = {
             'of-list': 'test-fdt1 test-fdt2',
+            'default-dt': 'test-fdt2',
         }
         data = self._DoReadFileDtb(
-            '170_fit_fdt.dts',
+            '172_fit_fdt.dts',
             entry_args=entry_args,
             extra_indirs=[os.path.join(self._indir, TEST_FDT_SUBDIR)])[0]
         self.assertEqual(U_BOOT_NODTB_DATA, data[-len(U_BOOT_NODTB_DATA):])
@@ -3639,7 +3640,7 @@ class TestFunctional(unittest.TestCase):
     def testFitFdtMissingList(self):
         """Test handling of a missing 'of-list' entry arg"""
         with self.assertRaises(ValueError) as e:
-            self._DoReadFile('170_fit_fdt.dts')
+            self._DoReadFile('172_fit_fdt.dts')
         self.assertIn("Generator node requires 'of-list' entry argument",
                       str(e.exception))
 
@@ -3657,5 +3658,39 @@ class TestFunctional(unittest.TestCase):
         self.assertIn("Generator node requires 'fit,fdt-list' property",
                       str(e.exception))
 
+    def testFitFdtEmptyList(self):
+        """Test handling of an empty 'of-list' entry arg"""
+        entry_args = {
+            'of-list': '',
+        }
+        data = self._DoReadFileDtb('172_fit_fdt.dts', entry_args=entry_args)[0]
+
+    def testFitFdtMissing(self):
+        """Test handling of a missing 'default-dt' entry arg"""
+        entry_args = {
+            'of-list': 'test-fdt1 test-fdt2',
+        }
+        with self.assertRaises(ValueError) as e:
+            self._DoReadFileDtb(
+                '172_fit_fdt.dts',
+                entry_args=entry_args,
+                extra_indirs=[os.path.join(self._indir, TEST_FDT_SUBDIR)])[0]
+        self.assertIn("Generated 'default' node requires default-dt entry argument",
+                      str(e.exception))
+
+    def testFitFdtNotInList(self):
+        """Test handling of a default-dt that is not in the of-list"""
+        entry_args = {
+            'of-list': 'test-fdt1 test-fdt2',
+            'default-dt': 'test-fdt3',
+        }
+        with self.assertRaises(ValueError) as e:
+            self._DoReadFileDtb(
+                '172_fit_fdt.dts',
+                entry_args=entry_args,
+                extra_indirs=[os.path.join(self._indir, TEST_FDT_SUBDIR)])[0]
+        self.assertIn("default-dt entry argument 'test-fdt3' not found in fdt list: test-fdt1, test-fdt2",
+                      str(e.exception))
+
 if __name__ == "__main__":
     unittest.main()
diff --git a/tools/binman/test/170_fit_fdt.dts b/tools/binman/test/172_fit_fdt.dts
similarity index 95%
rename from tools/binman/test/170_fit_fdt.dts
rename to tools/binman/test/172_fit_fdt.dts
index 89142e91017..99d710c57e9 100644
--- a/tools/binman/test/170_fit_fdt.dts
+++ b/tools/binman/test/172_fit_fdt.dts
@@ -40,7 +40,7 @@
 			};
 
 			configurations {
-				default = "config-1";
+				default = "@config-DEFAULT-SEQ";
 				@config-SEQ {
 					description = "conf-NAME.dtb";
 					firmware = "uboot";
-- 
2.28.0.402.g5ffc5be6b7-goog



More information about the U-Boot mailing list