September 2020 Archives by date

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...

Starting: Tue Sep 1 01:41:12 CEST 2020
Ending: Wed Sep 30 23:40:07 CEST 2020
Messages: 3192

• from https://gitlab.denx.de/u-boot/custodians/u-boot-mips:f3d8c7f8d3c02ff1de172aff7e6392a9ddd1f5b2 to master:   Daniel Schwierzeck
• [PATCH v5 11/11] riscv: Add FPIOA and GPIO support for Kendryte K210   Rick Chen
• [PATCH v3 1/4] mmc: pic32: Refresh PIC32 MMC driver   John Robertson
• [PATCH v3 2/4] mmc: pic32: Refresh PIC32 MMC driver   John Robertson
• [PATCH v3 3/4] mmc: pic32: Refresh PIC32 MMC driver   John Robertson
• [PATCH v3 4/4] mmc: pic32: Refresh PIC32 MMC driver   John Robertson
• [PATCH] mips: dts: Fix device tree warnings for PIC32MZDA   John Robertson
• from https://gitlab.denx.de/u-boot/custodians/u-boot-mips:f3d8c7f8d3c02ff1de172aff7e6392a9ddd1f5b2 to master:   Stefan Roese
• [PATCH v5 16/17] test/py: add a test for uefi firmware update capsule of FIT image   AKASHI Takahiro
• [PATCH] x86: mtrr: Fix parsing of "mtrr list" command   Bin Meng
• [PATCH] x86: mtrr: Fix parsing of "mtrr list" command   Bin Meng
• [PATCH v2 01/15] x86: Introduce USE_EARLY_BOARD_INIT option   Bin Meng
• [PATCH v2 02/15] x86: advantech: som-db5800-som-6867: Remove dead code   Bin Meng
• [PATCH v2 03/15] x86: congatec: conga-qeval20-qa3-e3845: Remove dead code   Bin Meng
• [PATCH v2 04/15] x86: coreboot: Remove dead code   Bin Meng
• [PATCH v2 05/15] x86: dfi: dfi-bt700: Remove dead code   Bin Meng
• [PATCH v2 06/15] x86: efi: efi-x86_payload: Remove dead code   Bin Meng
• [PATCH v2 07/15] x86: intel: bayleybay: Remove dead code   Bin Meng
• [PATCH v2 08/15] x86: intel: cherryhill: Remove dead code   Bin Meng
• [PATCH v2 09/15] x86: intel: cougarcanyon2: Remove dead code   Bin Meng
• [PATCH v2 10/15] x86: intel: crownbay: Remove dead code   Bin Meng
• [PATCH v2 11/15] x86: intel: edison: Remove dead code   Bin Meng
• [PATCH v2 12/15] x86: intel: galileo: Remove dead code   Bin Meng
• [PATCH v2 13/15] x86: intel: minnowmax: Remove dead code   Bin Meng
• [PATCH v2 14/15] x86: intel: slimbootloader: Remove dead code   Bin Meng
• [PATCH v2 15/15] x86: qemu: Remove dead code   Bin Meng
• [PATCH v2 01/15] x86: Introduce USE_EARLY_BOARD_INIT option   Bin Meng
• [PATCH 1/2] x86: pinctrl: Fix 'relatove' typo   Bin Meng
• [PATCH 2/2] x86: Drop nhlt_serialise()   Bin Meng
• [PATCH 1/2] x86: pinctrl: Fix 'relatove' typo   Bin Meng
• [PATCH 2/2] x86: Drop nhlt_serialise()   Bin Meng
• [PATCH v2 15/15] x86: qemu: Remove dead code   Bin Meng
• x86: multiple definition of `_X86EMU_env'   Heinrich Schuchardt
• [PATCH v3 2/2] arm64: mvebu: a37xx: Add support for EspressoBIN with eMMC   Andre Heider
• [PATCH v2 15/15] x86: qemu: Remove dead code   Andy Shevchenko
• [PATCH] lx2160: Correct sd_boot environment variable   meenakshi.aggarwal at nxp.com
• [PATCH v3] mmc: fsl_esdhc_imx: check the clock stable status after config the clock rate.   haibo.chen at nxp.com
• [PATCH] mmc: fsl_esdhc_imx: replace all readl/writel to esdhc_read32/esdhc_write32   haibo.chen at nxp.com
• [PATCH v2 01/16] x86: Update the bootparam header   Bin Meng
• [PATCH v3] x86: qemu: Remove dead code   Andy Shevchenko
• [PATCH v2 15/15] x86: qemu: Remove dead code   Andy Shevchenko
• [PATCH v2 02/16] x86: zimage: Use a state struct to hold the state   Bin Meng
• [PATCH v2 03/16] x86: zimage: Avoid using #ifdef   Bin Meng
• [PATCH v2 04/16] x86: zboot: Move kernel-version code into a function   Bin Meng
• [PATCH v2 05/16] x86: zboot: Correct image type   Bin Meng
• [v4, 00/11] mmc: fsl_esdhc: support eMMC HS200/HS400 modes   Yangbo Lu
• [v4, 01/11] mmc: add a reinit() API   Yangbo Lu
• [v4, 02/11] mmc: fsl_esdhc: add a reinit() callback   Yangbo Lu
• [v4, 03/11] mmc: fsl_esdhc: support tuning for eMMC HS200   Yangbo Lu
• [v4, 04/11] mmc: fsl_esdhc: clean TBCTL[TB_EN] manually during init   Yangbo Lu
• [v4, 05/11] mmc: add a hs400_tuning flag   Yangbo Lu
• [v4, 06/11] mmc: add a mmc_hs400_prepare_ddr() interface   Yangbo Lu
• [v4, 07/11] mmc: fsl_esdhc: support eMMC HS400 mode   Yangbo Lu
• [v4, 08/11] mmc: fsl_esdhc: fix mmc->clock with actual clock   Yangbo Lu
• [v4, 09/11] mmc: fsl_esdhc: fix eMMC HS400 stability issue   Yangbo Lu
• [v4, 10/11] arm: dts: lx2160ardb: support eMMC HS400 mode   Yangbo Lu
• [v4, 11/11] configs: lx2160ardb: enable eMMC HS400 mode support   Yangbo Lu
• [PATCH v3] x86: qemu: Remove dead code   Bin Meng
• [PATCH v2 07/16] x86: zboot: Set up a sub-command structure   Bin Meng
• [PATCH 0/2] Add support for LX2162AQDS board   meenakshi.aggarwal at nxp.com
• [PATCH 1/2] armv8: lx2162a: Add Soc changes to support LX2162A   meenakshi.aggarwal at nxp.com
• [PATCH 2/2] armv8: lx2162aqds: Add support for LX2162AQDS platform   meenakshi.aggarwal at nxp.com
• [PATCH v2 10/16] x86: zboot: Add an 'setup' subcommand   Bin Meng
• [PATCH v2 06/16] x86: zimage: Disable interrupts just before booting   Bin Meng
• [PATCH v2 08/16] x86: zboot: Add a 'go' subcommand   Bin Meng
• [PATCH v2 09/16] x86: zboot: Add an 'info' subcommand   Bin Meng
• [PATCH v2 11/16] x86: zboot: Set environment variables for image locations   Bin Meng
• [PATCH v2 13/16] x86: zboot: Add an option to dump the setup information   Bin Meng
• [PATCH v2 16/16] cros: Add information about booting Chrome OS on x86   Bin Meng
• [PATCH v2 12/16] x86: zboot: Allow setting a separate setup base address   Bin Meng
• [PATCH v2 14/16] x86: zboot: Allow overriding the command line   Bin Meng
• [PATCH v2 15/16] cros: Update chromium documentation   Bin Meng
• [PATCH v2] fastboot: getvar: fix partition-size return value   Sam Protsenko
• [PATCH v3 0/7] riscv: Clean up timer drivers   Sean Anderson
• [PATCH v3 1/7] riscv: Rework riscv timer driver to only support S-mode   Sean Anderson
• [PATCH v3 2/7] riscv: Rework Andes PLMT as a UCLASS_TIMER driver   Sean Anderson
• [PATCH v3 3/7] riscv: Clean up initialization in Andes PLIC   Sean Anderson
• [PATCH v3 4/7] riscv: Rework Sifive CLINT as UCLASS_TIMER driver   Sean Anderson
• [PATCH v3 5/7] riscv: clk: Add CLINT clock to kendryte clock driver   Sean Anderson
• [PATCH v3 6/7] riscv: Update Kendryte device tree for new CLINT driver   Sean Anderson
• [PATCH v3 7/7] riscv: Update SiFive device tree for new CLINT driver   Sean Anderson
• [PATCH] binman: Allow FIT binaries to have missing external blobs   Simon Glass
• [PATCH] binman: Allow FIT binaries to have missing external blobs   Simon Glass
• "Drop ffs" functionality in MTD DFU backend   Guillermo Rodriguez Garcia
• [PATCH 1/1] riscv: don't jump to 0x0 in handle_ipi()   Heinrich Schuchardt
• "Drop ffs" functionality in MTD DFU backend   Guillermo Rodriguez Garcia
• Missing BMP 565RGB video support   Anatolij Gustschin
• [PATCH v3 00/12] binman: Add support for generating more complex FITs   Simon Glass
• [PATCH v3 01/12] binman: Allow entry args to be required   Simon Glass
• [PATCH v3 02/12] binman: Fix up a few missing comments   Simon Glass
• [PATCH v3 03/12] libfdt: Detected out-of-space with fdt_finish()   Simon Glass
• [PATCH v3 04/12] binman: Move 'external' support into base class   Simon Glass
• [PATCH v3 05/12] binman: Add support for ATF BL31   Simon Glass
• [PATCH v3 06/12] binman: Support generating FITs with multiple dtbs   Simon Glass
• [PATCH v3 07/12] Makefile: Support missing external blobs always   Simon Glass
• [PATCH v3 08/12] sunxi: Convert 64-bit boards to use binman   Simon Glass
• [PATCH v3 09/12] sunxi: Drop the FIT-generator script   Simon Glass
• [PATCH v3 10/12] binman: Allow selecting default FIT configuration   Simon Glass
• [PATCH v3 11/12] binman: Support help messages for missing blobs   Simon Glass
• [PATCH v3 12/12] binman: sunxi: Add help message for missing sunxi ATF BL31   Simon Glass
• [PATCH 1/1] riscv: don't jump to 0x0 in handle_ipi()   Sean Anderson
• [PATCH 1/1] riscv: don't jump to 0x0 in handle_ipi()   Heinrich Schuchardt
• [PATCH] binman: Allow FIT binaries to have missing external blobs   Alper Nebi Yasak
• [GIT] Pull request: u-boot-dfu (30.08.2019)   Marek Vasut
• Boot Over Ehternet- Linux Server to Raspberry Pis- Using U-boot   Ahsan Zia (TAU)
• [PATCH v2] fastboot: getvar: fix partition-size return value   Gary Bisson
• from https://gitlab.denx.de/u-boot/custodians/u-boot-mips:f3d8c7f8d3c02ff1de172aff7e6392a9ddd1f5b2 to master:   Mauro Condarelli
• from https://gitlab.denx.de/u-boot/custodians/u-boot-mips:f3d8c7f8d3c02ff1de172aff7e6392a9ddd1f5b2 to master:   Stefan Roese
• from https://gitlab.denx.de/u-boot/custodians/u-boot-mips:f3d8c7f8d3c02ff1de172aff7e6392a9ddd1f5b2 to master:   Daniel Schwierzeck
• [PATCH v2] armv8: layerscape: don't remove crypto node if just partially disabled   Iuliana Prodan
• Please pull u-boot-x86   Bin Meng
• [PATCH 1/1] riscv: don't jump to 0x0 in handle_ipi()   Sean Anderson
• [PATCH v4 20/27] Makefile: Warn against using CONFIG_SPL_FIT_GENERATOR   Michal Simek
• [PATCH v2 3/3] binman: Build FIT image subentries with the section etype   Simon Glass
• [PATCH v2 2/3] binman: Respect pad-before property of section subentries   Simon Glass
• [PATCH v2 1/3] binman: Ignore hash*, signature* nodes in sections   Simon Glass
• [PATCH] binman: Fix typo in kernel-doc format for binman_symname()   Simon Glass
• [PATCH] binman: Call helper function binman_set_rom_offset() to fill offset   Simon Glass
• [PATCH] binman: Allow FIT binaries to have missing external blobs   Simon Glass
• [PATCH v4 20/27] Makefile: Warn against using CONFIG_SPL_FIT_GENERATOR   Simon Glass
• [PATCH v2 0/9] IPQ40xx: Improve support   Robert Marko
• [PATCH v2 1/9] dt-bindings: clock: import Qualcomm IPQ4019 bindings   Robert Marko
• [PATCH v2 2/9] IPQ40xx: clk: Use dt-bindings instead of hardcoding   Robert Marko
• [PATCH v2 3/9] IPQ40xx: Add SMEM support   Robert Marko
• [PATCH v2 4/9] reset: Add IPQ40xx reset controller driver   Robert Marko
• [PATCH v2 5/9] IPQ40xx: Add reset controller support   Robert Marko
• [PATCH v2 6/9] phy: add driver for Qualcomm IPQ40xx USB PHY   Robert Marko
• [PATCH v2 7/9] usb: dwc3: Make PHY functions depend on CONFIG_USB_DWC3   Robert Marko
• [PATCH v2 8/9] usb: xhci: Add Qualcomm DWC3 xHCI driver   Robert Marko
• [PATCH v2 9/9] IPQ40xx: Add USB nodes   Robert Marko
• Please pull u-boot-x86   Tom Rini
• [PATCH v2 1/2] mips: dts: Fix PIC32MZDA GPIO register definitions   John Robertson
• [PATCH v2 2/2] mips: dts: Fix PIC32MZDA GPIO register definitions   John Robertson
• [PATCH] time: Fix get_ticks being non-monotonic   Sean Anderson
• [PATCH 1/2] arm64: dts: armada-3720-espressobin: sync with downstream   Pali Rohár
• [PATCH v3 2/2] arm64: mvebu: a37xx: Add support for EspressoBIN with eMMC   Pali Rohár
• [PATCH v3 0/7] wdt: Add support for watchdogs on Kendryte K210   Sean Anderson
• [PATCH v3 1/7] wdt: dw: Switch to using fls for log2   Sean Anderson
• [PATCH v3 2/7] wdt: dw: Switch to if(CONFIG()) instead of using #if   Sean Anderson
• [PATCH v3 3/7] wdt: dw: Fix clock rate being off by 1000   Sean Anderson
• [PATCH v3 4/7] wdt: dw: Enable the clock before using it   Sean Anderson
• [PATCH v3 5/7] wdt: dw: Free the clock on error   Sean Anderson
• [PATCH v3 6/7] riscv: Add watchdog bindings for the k210   Sean Anderson
• [PATCH v3 7/7] riscv: Enable watchdog for the k210   Sean Anderson
• [PATCH 0/3] RISC-V tracing support   Sean Anderson
• [PATCH v2] arm: dts: fix ast2500-evb inclusion for the correct soc family   Thirupathaiah Annapureddy
• [RFC PATCH 0/1] Anti rollback protection for FIT Images   Thirupathaiah Annapureddy
• [RFC PATCH 1/1] image: add anti rollback protection for FIT Images   Thirupathaiah Annapureddy
• [PATCH v2] Fix data abort caused by mis-aligning FIT data   Reuben Dowle
• [PATCH] Expose active mmc boot partition to scripts   Reuben Dowle
• [PATCH] Expose active mmc boot partition to scripts   Tom Rini
• [PATCH] pinctrl: mediatek: mt8512: fix the wrong start address of ranges   Mingming Lee
• Aw: [PATCH RESEND v2 01/11] usb: xhci: add a member hci_version in xhci_ctrl struct   Chunfeng Yun
• u-boot crash on T2080RDB_SPIFLASH   Chris Packham
• [RESEND PATCH v2 01/11] usb: xhci: add a member hci_version in xhci_ctrl struct   Frank Wunderlich
• [RESEND PATCH v2 02/11] usb: xhci: create one unified function to calculate TRB TD remainder.   Frank Wunderlich
• [RESEND PATCH v2 03/11] usb: xhci: add quirks flag to support MediaTek xHCI 0.96   Frank Wunderlich
• [RESEND PATCH v2 04/11] usb: xhci: convert to HCS_MAX_PORTS()   Frank Wunderlich
• [RESEND PATCH v2 05/11] usb: xhci: convert to TRB_TYPE()   Frank Wunderlich
• [RESEND PATCH v2 06/11] usb: xhci: convert to TRB_INTR_TARGET()   Frank Wunderlich
• [RESEND PATCH v2 07/11] usb: xhci: convert to TRB_LEN()   Frank Wunderlich
• [RESEND PATCH v2 08/11] usb: xhci: convert to TRB_TX_TYPE()   Frank Wunderlich
• [RESEND PATCH v2 09/11] usb: xhci: convert to EP_TYPE()   Frank Wunderlich
• [RESEND PATCH v2 10/11] usb: xhci: use macros with parameter to fill ep_info2   Frank Wunderlich
• [RESEND PATCH v2 11/11] usb: xhci: convert to readx_poll_sleep_timeout()   Frank Wunderlich
• [PATCH v3 0/9] mips: Add Octeon DDR4 init code   Stefan Roese
• [PATCH v3 1/9] mips: octeon: dts: mrvl, cn73xx.dtsi: Add memory controller DT node   Stefan Roese
• [PATCH v3 2/9] mips: octeon: Add octeon-model.h header   Stefan Roese
• [PATCH v3 3/9] mips: octeon Add cvmx/cvmx-lmcx-defs.h header   Stefan Roese
• [PATCH v3 4/9] mips: octeon: Add octeon_ddr.h header   Stefan Roese
• [PATCH v3 5/9] ram: octeon: Add MIPS Octeon3 DDR4 support (part 1/3)   Stefan Roese
• [PATCH v3 6/9] ram: octeon: Add MIPS Octeon3 DDR4 support (part 2/3)   Stefan Roese
• [PATCH v3 7/9] ram: octeon: Add MIPS Octeon3 DDR4 support (part 3/3)   Stefan Roese
• [PATCH v3 8/9] mips: octeon: dram.c: Add RAM driver support   Stefan Roese
• [PATCH v3 9/9] mips: octeon: octeon_ebb7304: Add DDR4 support   Stefan Roese
• [PATCH] efi_loader: consider no-map property of reserved memory   Heinrich Schuchardt
• [PATCH 2/2] pcie: pcie_advk: move setting of reference clock to the pcie driver   Andre Heider
• [PATCH 1/2] armv8: lx2162a: Add Soc changes to support LX2162A   Priyanka Jain
• [PATCH 2/2] armv8: lx2162aqds: Add support for LX2162AQDS platform   Priyanka Jain
• [RFC PATCH 0/1] Anti rollback protection for FIT Images   Rasmus Villemoes
• Missing BMP 565RGB video support   Trommel, Kees (Contractor)
• spl_ll_find_loader() function in common/spl/spl.c is returning NULL   Murali Krishna
• [PATCH 1/2] armv8: lx2162a: Add Soc changes to support LX2162A   Meenakshi Aggarwal
• [PATCH v3 00/12] binman: Add support for generating more complex FITs   Michal Simek
• [RESEND PATCH v2 01/11] usb: xhci: add a member hci_version in xhci_ctrl struct   Marek Vasut
• [PATCH] dfu: Fix handling of UBI partitions in MTD backend   Guillermo Rodriguez
• [PATCH] arm64: Add support for bigger u-boot when CONFIG_POSITION_INDEPENDENT=y   Michal Simek
• [PATCH 0/5] Add spi boot support to am335x-icev2   Faiz Abbas
• [PATCH 1/5] arm: dts: am335x-icev2: Add spi node   Faiz Abbas
• [PATCH 2/5] configs: Add spiboot support for am335x   Faiz Abbas
• [PATCH 3/5] spi: spi-uclass: Block dm_scan_fdt_dev with OF_CONTROL to prevent build failures   Faiz Abbas
• [PATCH 4/5] spi: omap3_spi: Read platform data in ofdata_to_platdata()   Faiz Abbas
• [PATCH 5/5] arm: mach-omap2: am33xx: Add device structure for spi   Faiz Abbas
• [PATCH v2] arm: dts: lx2160a: Add IO range   Wasim Khan
• [PATCH v5 02/11] pinctrl: Reformat documentation in dm/pinctrl.h   Heinrich Schuchardt
• [PATCH v5 11/11] riscv: Add FPIOA and GPIO support for Kendryte K210   Heinrich Schuchardt
• [PATCH] Dockerfile: Remove high UID/GID   Harm Berntsen
• [PATCH 2/2] pcie: pcie_advk: move setting of reference clock to the pcie driver   Marek Behún
• [PATCH] buildman: Use git worktrees instead of git clones   Alper Nebi Yasak
• [PATCH 01/11] board/freescale: Remove p1023rdb board support   Priyanka Jain
• [RESEND PATCH v2 01/11] usb: xhci: add a member hci_version in xhci_ctrl struct   Bin Meng
• [PATCH v2 4/4] mmc: pic32: Refresh PIC32 MMC driver   John Robertson
• [PATCH v2 1/4] mmc: pic32: Refresh PIC32 MMC driver   John Robertson
• [PATCH] arm64: Add support for bigger u-boot when CONFIG_POSITION_INDEPENDENT=y   André Przywara
• [PATCH] arm64: Add support for bigger u-boot when CONFIG_POSITION_INDEPENDENT=y   Michal Simek
• [PATCH] arm64: Add support for bigger u-boot when CONFIG_POSITION_INDEPENDENT=y   Edgar E. Iglesias
• [PATCH v5 02/11] pinctrl: Reformat documentation in dm/pinctrl.h   Sean Anderson
• [PATCH] Dockerfile: Remove high UID/GID   Tom Rini
• [PATCH v5 02/11] pinctrl: Reformat documentation in dm/pinctrl.h   Heinrich Schuchardt
• [PATCH] arm64: Add support for bigger u-boot when CONFIG_POSITION_INDEPENDENT=y   André Przywara
• [PATCH] arm64: Add support for bigger u-boot when CONFIG_POSITION_INDEPENDENT=y   Edgar E. Iglesias
• [PATCH v5 02/11] pinctrl: Reformat documentation in dm/pinctrl.h   Sean Anderson
• [PATCH] travis-ci: Add SH4 r2dplus machine with various PCI ethernet options   Tom Rini
• [PATCH] travis-ci: Add SH4 r2dplus machine with various PCI ethernet options   Stephen Warren
• [PATCH v5 11/11] riscv: Add FPIOA and GPIO support for Kendryte K210   Sean Anderson
• [PATCH] arm64: Add support for bigger u-boot when CONFIG_POSITION_INDEPENDENT=y   Stephen Warren
• [PATCH] buildman: Use git worktrees instead of git clones   Simon Glass
• [PATCH v3 00/12] binman: Add support for generating more complex FITs   Simon Glass
• [PATCHv4 0/9] Introduce B1x5v2 support   Sebastian Reichel
• [PATCHv4 1/9] bootcount: add a DM SPI flash backing store for bootcount   Sebastian Reichel
• [PATCHv4 2/9] rtc: m41t62: reset SQW in m41t62_rtc_reset   Sebastian Reichel
• [PATCHv4 3/9] rtc: m41t62: add oscillator fail bit reset support   Sebastian Reichel
• [PATCHv4 4/9] imx6: allow usage of disable_ldb_di_clock_sources for CONFIG_MX6QDL   Sebastian Reichel
• [PATCHv4 5/9] sysreset: Add poweroff-gpio driver   Sebastian Reichel
• [PATCHv4 6/9] board: ge: common: rename ge_common.c to ge_rtc.c   Sebastian Reichel
• [PATCHv4 7/9] board: ge: common: add config option for RTC and VPD feature   Sebastian Reichel
• [PATCHv4 8/9] board: ge: common: vpd: separate I2C specific code   Sebastian Reichel
• [PATCHv4 9/9] board: ge: b1x5v2: Add GE B1x5v2 and B1x5Pv2   Sebastian Reichel
• [PATCH] travis-ci: Add SH4 r2dplus machine with various PCI ethernet options   Stephen Warren
• [PATCH v5 10/11] riscv: Add pinmux and gpio bindings for Kendryte K210   Heinrich Schuchardt
• [PATCH] arm64: Add support for bigger u-boot when CONFIG_POSITION_INDEPENDENT=y   André Przywara
• [PATCHv4 9/9] board: ge: b1x5v2: Add GE B1x5v2 and B1x5Pv2   Tom Rini
• [PATCH 1/1] cmd/button: return button status   Heinrich Schuchardt
• [PATCH 1/1] riscv: add DT binding for BOOT button on Maix board   Heinrich Schuchardt
• [PATCH v5 10/11] riscv: Add pinmux and gpio bindings for Kendryte K210   Sean Anderson
• [PATCH] buildman: Use git worktrees instead of git clones   Alper Nebi Yasak
• [PATCHv4 0/9] Introduce B1x5v2 support   Fabio Estevam
• u-boot crash on T2080RDB_SPIFLASH   Chris Packham
• [PATCH v1] armv8: MMU: Fix the memory map for RAM   Marek Bykowski
• [PATCH] configs: powerpc: Don't set CONFIG_ENV_ADDR for T2080RDB_SPIFLASH   Chris Packham
• [PATCH 0/3] RISC-V tracing support   Rick Chen
• [PATCH v3 1/7] riscv: Rework riscv timer driver to only support S-mode   Rick Chen
• [PATCH v3 2/7] riscv: Rework Andes PLMT as a UCLASS_TIMER driver   Rick Chen
• [PATCH v2 7/7] riscv: Update SiFive device tree for new CLINT driver   Bin Meng
• [PATCH] buildman: Use git worktrees instead of git clones   Simon Glass
• [PATCH v2 7/7] riscv: Update SiFive device tree for new CLINT driver   Anup Patel
• [PATCH v2 7/7] riscv: Update SiFive device tree for new CLINT driver   Bin Meng
• [PATCH v2 7/7] riscv: Update SiFive device tree for new CLINT driver   Anup Patel
• [PATCH 0/8] PinePhone automatic device tree selection   Samuel Holland
• [PATCH 1/8] sunxi: board: Use a more descriptive variable name   Samuel Holland
• [PATCH 2/8] sunxi: board: Add a helper to get the SPL DT name   Samuel Holland
• [PATCH 3/8] sunxi: board: Simplify Pine A64 DT selection logic   Samuel Holland
• [PATCH 4/8] sunxi: board: Add PinePhone DT selection logic   Samuel Holland
• [PATCH 5/8] sunxi: board: Save the chosen DT name in the SPL header   Samuel Holland
• [PATCH 6/8] sunxi: board: Set fdtfile to match the DT chosen by SPL   Samuel Holland
• [PATCH 7/8] sunxi: DT: A64: update device tree files   Samuel Holland
• [PATCH 8/8] sunxi: a64: Add a defconfig for the PinePhone   Samuel Holland
• [PATCH v2 1/3] spl: fit: Minimally parse OS properties with FIT_IMAGE_TINY   Samuel Holland
• [PATCH v2 2/3] mksunxi_fit_atf.sh: Update FIT component descriptions   Samuel Holland
• [PATCH v2 3/3] sunxi: Add support for including SCP firmware   Samuel Holland
• [PATCH 18/31] misc: am33xx: add control module driver   Lokesh Vutla
• [PATCH 09/31] clk: ti: refactor mux and divider clock drivers   Lokesh Vutla
• [GIT PULL] SoCFPGA change for v2020-10-rc4   Tan, Ley Foon
• [PATCH 0/8] PinePhone automatic device tree selection   Maxime Ripard
• SquashFS not compiling due to missing __udivdi3 and __umoddi3   Mauro Condarelli
• [PATCH v2 0/2] Add support for LX2162AQDS board   meenakshi.aggarwal at nxp.com
• [PATCH v2 1/2] armv8: lx2162a: Add Soc changes to support LX2162A   meenakshi.aggarwal at nxp.com
• [PATCH v2 2/2] armv8: lx2162aqds: Add support for LX2162AQDS platform   meenakshi.aggarwal at nxp.com
• [PATCH] spl: Kconfig: Record proper dependency for SPL_ATF   Michal Simek
• SquashFS not compiling due to missing __udivdi3 and __umoddi3   Mauro Condarelli
• [PATCH v2 7/7] riscv: Update SiFive device tree for new CLINT driver   Sean Anderson
• [PATCH 0/2] Add support for loading images above 4GB   Michal Simek
• [PATCH 1/2] spl: Use standard FIT entries   Michal Simek
• [PATCH 2/2] spl: fdt: Record load/entry fit-images entries in 64bit format   Michal Simek
• [PATCH] arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding   Michal Simek
• [PATCH 0/2] Add support for loading images above 4GB   Heinrich Schuchardt
• RPi4 U-Boot freeze   Stefan Agner
• [PATCH v2 7/7] riscv: Update SiFive device tree for new CLINT driver   Anup Patel
• [PULL] u-boot-usb/master   Marek Vasut
• [PULL] u-boot-sh/master   Marek Vasut
• [PATCH] configs: powerpc: Don't set CONFIG_ENV_ADDR for T2080RDB_SPIFLASH   Tom Rini
• [PATCH 0/2] Add support for loading images above 4GB   Michal Simek
• [PATCH v2] buildman: Use git worktrees instead of git clones when possible   Alper Nebi Yasak
• [RFC, v2] SquashFS not compiling due to missing __udivdi3 and __umoddi3   Mauro Condarelli
• [PULL] u-boot-usb/master   Tom Rini
• U-Boot fails dfu on edison   Simon Glass
• [PATCH v3 00/12] binman: Add support for generating more complex FITs   Michal Simek
• [PATCH] arm64: Add support for bigger u-boot when CONFIG_POSITION_INDEPENDENT=y   Michal Simek
• [PULL] u-boot-usb/master   Marek Vasut
• [PATCH] arm64: Add support for bigger u-boot when CONFIG_POSITION_INDEPENDENT=y   André Przywara
• U-Boot fails dfu on edison   Andy Shevchenko
• [PATCH] arm64: Add support for bigger u-boot when CONFIG_POSITION_INDEPENDENT=y   Michal Simek
• [PATCH v2 1/3] spl: fit: Minimally parse OS properties with FIT_IMAGE_TINY   Tom Rini
• [PULL] u-boot-usb/master   Tom Rini
• U-Boot fails dfu on edison   Andy Shevchenko
• [PATCH] arm64: Add support for bigger u-boot when CONFIG_POSITION_INDEPENDENT=y   André Przywara
• [PATCH] arm64: Add support for bigger u-boot when CONFIG_POSITION_INDEPENDENT=y   Edgar E. Iglesias
• [PATCH v4 0/4] Support for specifying extra IOMMU mappings for PCI   laurentiu.tudor at nxp.com
• [PATCH v4 1/4] pci: layerscape: move per-pci device fdt fixup in a function   laurentiu.tudor at nxp.com
• [PATCH v4 2/4] pci: layerscape: move pci node search in a common function   laurentiu.tudor at nxp.com
• [PATCH v4 3/4] pci: add a few ARI related defines   laurentiu.tudor at nxp.com
• [PATCH v4 4/4] pci: layerscape: add a way of specifying additional iommu mappings   laurentiu.tudor at nxp.com
• [PATCH] arm64: Add support for bigger u-boot when CONFIG_POSITION_INDEPENDENT=y   Michal Simek
• U-Boot fails dfu on edison   Simon Glass
• U-Boot fails dfu on edison   Andy Shevchenko
• [PATCH] arm64: Add support for bigger u-boot when CONFIG_POSITION_INDEPENDENT=y   Stephen Warren
• U-Boot fails dfu on edison   Andy Shevchenko
• [PATCH] ARM: Distro boot: document the need for fdtfile variable to be set   Dennis Gilmore
• [PATCH] spl: Avoid printing boot device if silent console is enabled   Otavio Salvador
• [PATCH] ARM: Distro boot: document the need for fdtfile variable to be set   Andre Heider
• [PATCH] ARM: Distro boot: document the need for fdtfile variable to be set   Tom Rini
• [GIT PULL] SoCFPGA change for v2020-10-rc4   Tom Rini
• [PULL] u-boot-sh/master   Tom Rini
• [PULL] u-boot-usb/master   Tom Rini
• [PATCH] spl: Avoid printing boot device if silent console is enabled   Tom Rini
• [PATCH] ARM: Distro boot: document the need for fdtfile variable to be set   Vagrant Cascadian
• [PATCH] arm64: Add support for bigger u-boot when CONFIG_POSITION_INDEPENDENT=y   Edgar E. Iglesias
• [PATCH] arm64: Add support for bigger u-boot when CONFIG_POSITION_INDEPENDENT=y   Stephen Warren
• [PATCH] arm64: Add support for bigger u-boot when CONFIG_POSITION_INDEPENDENT=y   Edgar E. Iglesias
• [PATCH] ARM: Distro boot: document the need for fdtfile variable to be set   Stephen Warren
• [PATCH] ARM: Distro boot: document the need for fdtfile variable to be set   Andre Heider
• [PATCH] ARM: Distro boot: document the need for fdtfile variable to be set   Dennis Gilmore
• [PATCH] ARM: Distro boot: document the need for fdtfile variable to be set   Stephen Warren
• [PATCH] ARM: Distro boot: document the need for fdtfile variable to be set   Dennis Gilmore
• flash-kernel: Add vendor path for some arm64 machines   Vagrant Cascadian
• [RESEND PATCH v2 01/11] usb: xhci: add a member hci_version in xhci_ctrl struct   Bin Meng
• [PATCH 0/5] edison: Support for writing an xFSTK image   Simon Glass
• [PATCH 1/5] x86: Use multiple images   Simon Glass
• [PATCH 2/5] binman: Show an error when a file is missing   Simon Glass
• [PATCH 3/5] binman: Support adding a U-Boot environment   Simon Glass
• [PATCH 4/5] x86: edison: Generate an image suitable for xFSTK   Simon Glass
• [PATCH 5/5] x86: edison: Add documentation for using am xFSTK image   Simon Glass
• RPi4 U-Boot freeze   Bin Meng
• [PATCH] spl: Avoid printing boot device if silent console is enabled   Stefan Roese
• [PATCH] ARM: MediaTek: amend IC description for MediaTek MT8512   mingming lee
• [PATCH] configs: powerpc: Don't set CONFIG_ENV_ADDR for T2080RDB_SPIFLASH   Chris Packham
• [PATCH RESEND v2 03/11] usb: xhci: add quirks flag to support MediaTek xHCI 0.96   Bin Meng
• [RESEND PATCH v2 04/11] usb: xhci: convert to HCS_MAX_PORTS()   Bin Meng
• [PATCH RESEND v2 05/11] usb: xhci: convert to TRB_TYPE()   Bin Meng
• [PATCH RESEND v2 05/11] usb: xhci: convert to TRB_TYPE()   Marek Vasut
• [PATCH RESEND v2 05/11] usb: xhci: convert to TRB_TYPE()   Bin Meng
• [PATCH RESEND v2 05/11] usb: xhci: convert to TRB_TYPE()   Chunfeng Yun
• [PATCH v3 1/3] fdtdec: optionally add property no-map to created reserved memory node   Etienne Carriere
• [PATCH] dfu: Fix handling of UBI partitions in MTD backend   Patrick DELAUNAY
• [PATCH 1/1] cmd/button: return button status   Philippe REYNES
• [PATCH] phy: marvell: a3700: add sata comphy on lane 2 with invert option   Stefan Roese
• [PATCH 1/2] defconfig: espressobin: Include support for Gigadevice SPI   Stefan Roese
• [PATCH 2/2] defconfig: espressobin: Add support for ISSI SPI flashes   Stefan Roese
• [PATCH 1/2] arm64: dts: armada-3720-espressobin: sync with downstream   Stefan Roese
• [PATCH v3 2/2] arm64: mvebu: a37xx: Add support for EspressoBIN with eMMC   Stefan Roese
• [PATCH v2 0/3] arm64: Large PIE fixes   Edgar E. Iglesias
• [PATCH v2 1/3] arm64: Mention 4K aligned load addresses in the PIE Kconfig help   Edgar E. Iglesias
• [PATCH v2 2/3] arm64: Bail out PIE builds early if load address is not 4K aligned   Edgar E. Iglesias
• [PATCH v2 3/3] arm64: Add support for larger PIE U-boot   Edgar E. Iglesias
• [RESEND PATCH v2 05/11] usb: xhci: convert to TRB_TYPE()   Bin Meng
• [PATCH 1/5] x86: Use multiple images   Andy Shevchenko
• [PATCH 2/5] binman: Show an error when a file is missing   Andy Shevchenko
• [PATCH 3/5] binman: Support adding a U-Boot environment   Andy Shevchenko
• [PATCH v1 1/5] arm: socfpga: mailbox: Refactor mailbox timeout event handling   Tan, Ley Foon
• [PATCH v1 2/5] arm: socfpga: mailbox: Always read mailbox responses before returning status   Tan, Ley Foon
• [PATCH 4/5] x86: edison: Generate an image suitable for xFSTK   Andy Shevchenko
• [PATCH v1 3/5] arm: socfpga: mailbox: Support sending large mailbox command   Tan, Ley Foon
• [PATCH 5/5] x86: edison: Add documentation for using am xFSTK image   Andy Shevchenko
• [PATCH 0/5] edison: Support for writing an xFSTK image   Andy Shevchenko
• [RFC PATCH 0/7]   Patrick Delaunay
• [RFC PATCH 1/7] lmb: Add support of flags for no-map properties   Patrick Delaunay
• [RFC PATCH 2/7] lmb: add lmb_is_reserved_flags   Patrick Delaunay
• [RFC PATCH 3/7] lmb: remove lmb_region.size   Patrick Delaunay
• [RFC PATCH 4/7] lmb: add lmb_dump_region() function   Patrick Delaunay
• [RFC PATCH 5/7] test: lmb: add test for lmb_reserve_flags   Patrick Delaunay
• [RFC PATCH 6/7] image-fdt: save no-map parameter of reserve-memory   Patrick Delaunay
• [RFC PATCH 7/7] arm: cache: cp15: don't map the reserved region with no-map property   Patrick Delaunay
• [PATCH] stm32mp: limit size of cacheable DDR in pre-reloc stage   Patrick Delaunay
• [PATCH v1] armv8: MMU: Fix the memory map for RAM   Patrick DELAUNAY
• [PATCH] configs: powerpc: Don't set CONFIG_ENV_ADDR for T2080RDB_SPIFLASH   Tom Rini
• [PATCH 1/2] arm64: dts: armada-3720-espressobin: sync with downstream   Stefan Roese
• [RFC PATCH 0/7]   Ard Biesheuvel
• [PATCH 1/2] arm64: dts: armada-3720-espressobin: sync with downstream   Andre Heider
• [PATCH 1/2] arm64: dts: armada-3720-espressobin: sync with downstream   Stefan Roese
• [PATCH v2 3/3] arm64: Add support for larger PIE U-boot   Michal Simek
• [PATCH v2 3/3] arm64: Add support for larger PIE U-boot   Edgar E. Iglesias
• [PATCH] phy: marvell: a3700: add sata comphy on lane 2 with invert option   Stefan Roese
• [PATCH 1/2] defconfig: espressobin: Include support for Gigadevice SPI   Stefan Roese
• [PATCH 2/2] defconfig: espressobin: Add support for ISSI SPI flashes   Stefan Roese
• Please pull u-boot-marvell/master   Stefan Roese
• [PATCH 1/2] rockchip: dts: tinker: move i2c node to shared device tree   Stefan Agner
• [PATCH 2/2] rockchip: dts: tinker: remove unnecessary node   Stefan Agner
• [PATCH v2 08/57] x86: acpi: Support external GNVS tables   Wolfgang Wallner
• [PATCH] xilinx: common: Do not save fdt_blob to bss section   Michal Simek
• [PATCH v2 1/3] arm64: dts: armada-3720-espressobin: use Linux model/compatible strings   Andre Heider
• [PATCH v2 2/3] arm64: dts: armada-3720-espressobin: split common parts to .dtsi   Andre Heider
• [PATCH v2 3/3] arm64: dts: a3720: add support for espressobin with populated emmc   Andre Heider
• [PATCH v7 00/21] mtd: spi-nor-core: add xSPI Octal DTR support   Pratyush Yadav
• [PATCH v7 01/21] spi: spi-mem: allow specifying whether an op is DTR or not   Pratyush Yadav
• [PATCH v7 02/21] spi: spi-mem: allow specifying a command's extension   Pratyush Yadav
• [PATCH v7 03/21] spi: cadence-qspi: Do not calibrate when device tree sets read delay   Pratyush Yadav
• [PATCH v7 04/21] spi: cadence-qspi: Add support for octal DTR flashes   Pratyush Yadav
• [PATCH v7 05/21] arm: mvebu: x530: Use tiny SPI NOR   Pratyush Yadav
• [PATCH v7 06/21] mtd: spi-nor-core: Add a ->setup() hook   Pratyush Yadav
• [PATCH v7 07/21] mtd: spi-nor-core: Move SFDP related declarations to top   Pratyush Yadav
• [PATCH v7 08/21] mtd: spi-nor-core: Introduce flash-specific fixup hooks   Pratyush Yadav
• [PATCH v7 09/21] mtd: spi-nor-core: Rework hwcaps selection   Pratyush Yadav
• [PATCH v7 10/21] mtd: spi-nor-core: Add support for DTR protocol   Pratyush Yadav
• [PATCH v7 11/21] mtd: spi-nor-core: prepare BFPT parsing for JESD216 rev D   Pratyush Yadav
• [PATCH v7 12/21] mtd: spi-nor-core: Get command opcode extension type from BFPT   Pratyush Yadav
• [PATCH v7 13/21] mtd: spi-nor-core: Parse xSPI Profile 1.0 table   Pratyush Yadav
• [PATCH v7 14/21] mtd: spi-nor-core: Prepare Read SR and FSR for Octal DTR mode   Pratyush Yadav
• [PATCH v7 15/21] mtd: spi-nor-core: Enable octal DTR mode when possible   Pratyush Yadav
• [PATCH v7 16/21] mtd: spi-nor-core: Do not make invalid quad enable fatal   Pratyush Yadav
• [PATCH v7 17/21] mtd: spi-nor-core: Detect Soft Reset sequence support from BFPT   Pratyush Yadav
• [PATCH v7 18/21] mtd: spi-nor-core: Perform a Soft Reset on shutdown   Pratyush Yadav
• [PATCH v7 19/21] mtd: spi-nor-core: Perform a Soft Reset on boot   Pratyush Yadav
• [PATCH v7 20/21] mtd: spi-nor-core: Add support for Cypress Semper flash   Pratyush Yadav
• [PATCH v7 21/21] mtd: spi-nor-core: Allow using Micron mt35xu512aba in Octal DTR mode   Pratyush Yadav
• [PATCH 1/2] arm64: dts: armada-3720-espressobin: sync with downstream   Andre Heider
• [PATCH v7 05/21] arm: mvebu: x530: Use tiny SPI NOR   Pratyush Yadav
• Please pull u-boot-marvell/master   Tom Rini
• [PATCH] Add support for Davicom DM96xx based USB 10/100 ethernet devices   hyyoxhk
• [PATCH v2 1/3] arm64: Mention 4K aligned load addresses in the PIE Kconfig help   Stephen Warren
• [PATCH v2 2/3] arm64: Bail out PIE builds early if load address is not 4K aligned   Stephen Warren
• [PATCH v2 3/3] arm64: Add support for larger PIE U-boot   Stephen Warren
• [PATCH v1] armv8: MMU: Fix the memory map for RAM   Marek Bykowski
• [PATCH v1] armv8: MMU: Fix the memory map for RAM   Marek Bykowski
• [PATCH v1] armv8: MMU: Fix the memory map for RAM   Tom Rini
• [PATCH] ARM: imx: Add support for the primary/secondary bmode to MX53   Marek Vasut
• [PATCH 0/5] edison: Support for writing an xFSTK image   Simon Glass
• [PATCH 0/2] doc: describe building with GCC   Heinrich Schuchardt
• [PATCH 1/2] doc: describe source repository   Heinrich Schuchardt
• [PATCH 2/2] doc: describe building with GCC   Heinrich Schuchardt
• [PATCH] Makefile: mrproper shall delete doc/output/   Heinrich Schuchardt
• [PATCH 1/1] espresso7420: remove unused symbol CONFIG_DEFAULT_CONSOLE   Heinrich Schuchardt
• [PATCH 1/1] doc: correct kflash settings for Maix One Dock   Heinrich Schuchardt
• [PATCH 18/31] misc: am33xx: add control module driver   Dario Binacchi
• [PATCH] doc/sipeed/maix: describe RESET and BOOT button   Heinrich Schuchardt
• Fwd: [PATCH 1/1] espresso7420: remove unused symbol CONFIG_DEFAULT_CONSOLE   Heinrich Schuchardt
• [PATCH] arm: mvebu: Espressobin: Set environment variable fdtfile   Andre Heider
• [PATCH] ARM: dts: stm32: Pull UART4 RX high on AV96   Marek Vasut
• [PATCH 2/2] doc: describe building with GCC   Tom Rini
• [PATCH] riscv: Only enable OF_BOARD_FIXUP for S-Mode   Sean Anderson
• [PATCH v5 11/11] riscv: Add FPIOA and GPIO support for Kendryte K210   Sean Anderson
• [PATCH 0/3] binman: Make tests work on non-x86 architectures via cross-compilation   Alper Nebi Yasak
• [PATCH 1/3] binman: Support cross-compiling test files to x86   Alper Nebi Yasak
• [PATCH 2/3] binman: Use target-specific tools when cross-compiling   Alper Nebi Yasak
• [PATCH 3/3] binman: Allow resolving host-specific tools from env vars   Alper Nebi Yasak
• [PATCH v2] buildman: Use git worktrees instead of git clones when possible   Simon Glass
• [PATCH 1/3] binman: Support cross-compiling test files to x86   Simon Glass
• [PATCH 2/3] binman: Use target-specific tools when cross-compiling   Simon Glass
• [PATCH 3/3] binman: Allow resolving host-specific tools from env vars   Simon Glass
• [PATCH v2] buildman: Use git worktrees instead of git clones when possible   Simon Glass
• [PATCH] x86: Drop duplicate declaration of emulator state   Simon Glass
• [PATCH v2 2/2] sandbox: enable support of generic udp protocol   Simon Glass
• [PATCH v2 1/2] net: add a generic udp protocol   Simon Glass
• x86: multiple definition of `_X86EMU_env'   Simon Glass
• [PATCH v3 00/17] x86: zboot: Enhance the 'zboot' command   Simon Glass
• [PATCH v3 01/17] x86: Update the bootparam header   Simon Glass
• [PATCH v3 02/17] x86: zimage: Use a state struct to hold the state   Simon Glass
• [PATCH v3 03/17] x86: zimage: Avoid using #ifdef   Simon Glass
• [PATCH v3 04/17] x86: zboot: Move kernel-version code into a function   Simon Glass
• [PATCH v3 05/17] x86: zboot: Correct image type   Simon Glass
• [PATCH v3 06/17] x86: zimage: Disable interrupts just before booting   Simon Glass
• [PATCH v3 07/17] x86: zboot: Set up a sub-command structure   Simon Glass
• [PATCH v3 08/17] x86: zboot: Add a 'go' subcommand   Simon Glass
• [PATCH v3 09/17] x86: zboot: Add an 'info' subcommand   Simon Glass
• [PATCH v3 10/17] x86: zboot: Add an 'load' subcommand   Simon Glass
• [PATCH v3 11/17] x86: zboot: Add an 'setup' subcommand   Simon Glass
• [PATCH v3 12/17] x86: zboot: Set environment variables for image locations   Simon Glass
• [PATCH v3 13/17] x86: zboot: Allow setting a separate setup base address   Simon Glass
• [PATCH v3 14/17] x86: zboot: Add an option to dump the setup information   Simon Glass
• [PATCH v3 15/17] x86: zboot: Allow overriding the command line   Simon Glass
• [PATCH v3 16/17] cros: Update chromium documentation   Simon Glass
• [PATCH v3 17/17] cros: Add information about booting Chrome OS on x86   Simon Glass
• [PATCH v2 2/3] mksunxi_fit_atf.sh: Update FIT component descriptions   Simon Glass
• [PATCH v2 3/3] sunxi: Add support for including SCP firmware   Simon Glass
• [PATCH v2 07/16] x86: zboot: Set up a sub-command structure   Simon Glass
• [PATCH] Revert "env: Warn on force access if ENV_ACCESS_IGNORE_FORCE set"   Marek Vasut
• [PATCH v2] buildman: Use git worktrees instead of git clones when possible   Simon Glass
• [PATCH v3 07/12] Makefile: Support missing external blobs always   Simon Glass
• [PATCH v3 06/12] binman: Support generating FITs with multiple dtbs   Simon Glass
• [PATCH v3 05/12] binman: Add support for ATF BL31   Simon Glass
• [PATCH v3 04/12] binman: Move 'external' support into base class   Simon Glass
• [PATCH v3 03/12] libfdt: Detected out-of-space with fdt_finish()   Simon Glass
• [PATCH v3 02/12] binman: Fix up a few missing comments   Simon Glass
• [PATCH v3 01/12] binman: Allow entry args to be required   Simon Glass
• [PATCH 1/2] core: improve of_match_ptr with OF_PLATDATA   Simon Glass
• [PATCH] spl: Add SPL_SERIAL as requirement for SDP_USB_SDP   Otavio Salvador
• [PATCH] spl: Add SPL_SERIAL as requirement for SDP_USB_SDP   Fabio Estevam
• [PATCH v3 06/12] binman: Support generating FITs with multiple dtbs   Samuel Holland
• [PATCH 1/3] binman: Support cross-compiling test files to x86   Alper Nebi Yasak
• [PATCH v3 05/12] binman: Add support for ATF BL31   Samuel Holland
• [PATCH 2/3] binman: Use target-specific tools when cross-compiling   Alper Nebi Yasak
• [PATCH v3 08/12] sunxi: Convert 64-bit boards to use binman   Samuel Holland
• [PATCH 3/3] binman: Allow resolving host-specific tools from env vars   Alper Nebi Yasak
• [PATCH v3 06/12] binman: Support generating FITs with multiple dtbs   Samuel Holland
• [PATCH v3 08/12] sunxi: Convert 64-bit boards to use binman   Samuel Holland
• [PATCH 2/3] binman: Use target-specific tools when cross-compiling   Simon Glass
• [PATCH v3 05/12] binman: Add support for ATF BL31   Simon Glass
• [PATCH v3 06/12] binman: Support generating FITs with multiple dtbs   Simon Glass
• [PATCH v3 08/12] sunxi: Convert 64-bit boards to use binman   Simon Glass
• [PATCH 1/3] binman: Support cross-compiling test files to x86   Simon Glass
• [PATCH v3 08/12] sunxi: Convert 64-bit boards to use binman   Simon Glass
• [PATCH v3 06/12] binman: Support generating FITs with multiple dtbs   Simon Glass
• [PATCH v3 08/12] sunxi: Convert 64-bit boards to use binman   Samuel Holland
• [PATCH v3 08/12] sunxi: Convert 64-bit boards to use binman   Simon Glass
• [PATCH v3 0/9] sunxi: binman fixes and SCP firmware support   Samuel Holland
• [PATCH v3 1/9] Makefile: Only define u-boot.itb rule when applicable   Samuel Holland
• [PATCH v3 2/9] binman: Only write FDT once per node   Samuel Holland
• [PATCH v3 3/9] spl: fit: Minimally parse OS properties with FIT_IMAGE_TINY   Samuel Holland
• [PATCH v3 4/9] sunxi: binman: Fix spacing between nodes   Samuel Holland
• [PATCH v3 5/9] sunxi: binman: Provide a default BL31 filename   Samuel Holland
• [PATCH v3 6/9] sunxi: binman: Use a macro for the BL31 load address   Samuel Holland
• [PATCH v3 7/9] sunxi: binman: Update FIT component descriptions   Samuel Holland
• [PATCH v3 8/9] binman: Add support for SCP firmware   Samuel Holland
• [PATCH v3 9/9] sunxi: binman: Add support for including SCP firmware   Samuel Holland
• [PATCH 1/2] arm64: dts: armada-3720-espressobin: sync with downstream   Pali Rohár
• [PATCH] arm: mvebu: Espressobin: Set environment variable fdtfile   Pali Rohár
• [PATCH] riscv: Only enable OF_BOARD_FIXUP for S-Mode   Heinrich Schuchardt
• [PATCH 2/2] doc: describe building with GCC   Heinrich Schuchardt
• [PATCH v2 0/4] binman: Make tests work on non-x86 architectures via cross-compilation   Alper Nebi Yasak
• [PATCH v2 1/4] binman: Support cross-compiling test files to x86   Alper Nebi Yasak
• [PATCH v2 2/4] binman: Use target-specific tools when cross-compiling   Alper Nebi Yasak
• [PATCH v2 3/4] binman: Allow resolving host-specific tools from env vars   Alper Nebi Yasak
• [PATCH v2 4/4] binman: Document how CROSS_COMPILE, CC, HOSTCC etc. are used in README   Alper Nebi Yasak
• [PATCH v2 00/30] Add DM support for omap PWM backlight   Dario Binacchi
• [PATCH v2 01/30] clk: remove a redundant header   Dario Binacchi
• [PATCH v2 02/30] clk: export generic routines   Dario Binacchi
• [PATCH v2 03/30] arch: sandbox: fix typo in clk.h   Dario Binacchi
• [PATCH v2 04/30] clk: add clk_round_rate()   Dario Binacchi
• [PATCH v2 05/30] clk: ti: add mux clock driver   Dario Binacchi
• [PATCH v2 06/30] arm: ti: am33xx: add DPLL_EN_FAST_RELOCK_BYPASS macro   Dario Binacchi
• [PATCH v2 07/30] clk: ti: am33xx: add DPLL clock drivers   Dario Binacchi
• [PATCH v2 08/30] clk: ti: add divider clock driver   Dario Binacchi
• [PATCH v2 09/30] clk: ti: add gate clock driver   Dario Binacchi
• [PATCH v2 10/30] ti: am33xx: fix do_enable_clocks() to accept NULL parameters   Dario Binacchi
• [PATCH v2 11/30] clk: ti: add support for clkctrl clocks   Dario Binacchi
• [PATCH v2 12/30] clk: ti: move drivers to 'ti' directory   Dario Binacchi
• [PATCH v2 13/30] clk: ti: omap4: add clock manager driver   Dario Binacchi
• [PATCH v2 14/30] clk: ti: am335x: add clock manager driver   Dario Binacchi
• [PATCH v2 15/30] fdt: translate address if #size-cells = <0>   Dario Binacchi
• [PATCH v2 16/30] omap: timer: fix the rate setting   Dario Binacchi
• [PATCH v2 17/30] misc: am33xx: add control module driver   Dario Binacchi
• [PATCH v2 18/30] pwm: ti: am33xx: add enhanced pwm driver   Dario Binacchi
• [PATCH v2 19/30] pwm: ti: am33xx: add subsystem driver   Dario Binacchi
• [PATCH v2 20/30] video: backlight: fix pwm's duty cycle calculation   Dario Binacchi
• [PATCH v2 21/30] video: backlight: fix pwm data structure description   Dario Binacchi
• [PATCH v2 22/30] dm: core: improve uclass_get_device_by_phandle_id() description   Dario Binacchi
• [PATCH v2 23/30] gpio: fix gpio_request_by_name() description   Dario Binacchi
• [PATCH v2 24/30] dm: core: add a function to decode display timings   Dario Binacchi
• [PATCH v2 25/30] video: omap: add panel driver   Dario Binacchi
• [PATCH v2 26/30] video: omap: enable LCD clock domain through DM API   Dario Binacchi
• [PATCH v2 27/30] video: omap: set LCD clock rate through DM API   Dario Binacchi
• [PATCH v2 28/30] video: omap: split the legacy code from the DM code   Dario Binacchi
• [PATCH v2 29/30] video: omap: move drivers to 'ti' directory   Dario Binacchi
• [PATCH v2 30/30] board: ti: am335x-ice: get CDCE913 clock device   Dario Binacchi
• [PATCH] riscv: Only enable OF_BOARD_FIXUP for S-Mode   Sean Anderson
• U-boot command prompt failed to load in Raspberry pi 4   satish reddy
• [PATCH v3 1/9] Makefile: Only define u-boot.itb rule when applicable   Simon Glass
• [PATCH v3 2/9] binman: Only write FDT once per node   Simon Glass
• [PATCH v3 4/9] sunxi: binman: Fix spacing between nodes   Simon Glass
• [PATCH v3 5/9] sunxi: binman: Provide a default BL31 filename   Simon Glass
• [PATCH v3 6/9] sunxi: binman: Use a macro for the BL31 load address   Simon Glass
• [PATCH v3 8/9] binman: Add support for SCP firmware   Simon Glass
• [PATCH v2 1/4] binman: Support cross-compiling test files to x86   Simon Glass
• [PATCH v2 4/4] binman: Document how CROSS_COMPILE, CC, HOSTCC etc. are used in README   Simon Glass
• [PATCH v3 9/9] sunxi: binman: Add support for including SCP firmware   Simon Glass
• [PATCH v2 08/57] x86: acpi: Support external GNVS tables   Simon Glass
• [PATCH 1/2] arm64: dts: armada-3720-espressobin: sync with downstream   Peter Robinson
• [PATCH 1/2] arm64: dts: armada-3720-espressobin: sync with downstream   Pali Rohár
• [PATCH] arm: mvebu: Espressobin: Set environment variable fdtfile   Marek Behun
• [PATCH v2 0/5] edison: Support for writing an xFSTK image   Simon Glass
• [PATCH v2 1/5] x86: Use multiple images   Simon Glass
• [PATCH v2 2/5] binman: Show an error when a file is missing   Simon Glass
• [PATCH v2 3/5] binman: Support adding a U-Boot environment   Simon Glass
• [PATCH v2 4/5] x86: edison: Generate an image suitable for xFSTK   Simon Glass
• [PATCH v2 5/5] x86: edison: Add documentation for using am xFSTK image   Simon Glass
• [PATCH v4 0/3] binman: Further updates for FIT support   Simon Glass
• [PATCH v4 1/3] binman: Allow selecting default FIT configuration   Simon Glass
• [PATCH v4 2/3] binman: Support help messages for missing blobs   Simon Glass
• [PATCH v4 3/3] binman: sunxi: Add help message for missing sunxi ATF BL31   Simon Glass
• [PATCH] efi_loader: log messages for bootefi command   Heinrich Schuchardt
• [PATCH] arm: mvebu: Espressobin: Set environment variable fdtfile   Andre Heider
• [PATCH] arm: mvebu: Espressobin: Set environment variable fdtfile   Andre Heider
• [PATCH] arm: mvebu: Espressobin: Set environment variable fdtfile   Marek Behun
• [PATCH 1/1] espresso7420: remove unused symbol CONFIG_DEFAULT_CONSOLE   Andre Heider
• [PATCH 1/1] espresso7420: remove unused symbol CONFIG_DEFAULT_CONSOLE   Heinrich Schuchardt
• [PATCH v7 05/21] arm: mvebu: x530: Use tiny SPI NOR   Chris Packham
• [PATCH v7 05/21] arm: mvebu: x530: Use tiny SPI NOR   Chris Packham
• [PATCH v3 00/57] dm: Add programatic generation of ACPI tables (part D)   Simon Glass
• [PATCH v3 01/57] x86: acpi: Add cros_ec tables   Simon Glass
• [PATCH v3 02/57] x86: acpi: Add base asl files for common x86 devices   Simon Glass
• [PATCH v3 03/57] x86: acpi: apl: Add asl files for Apollo Lake   Simon Glass
• [PATCH v3 04/57] x86: acpi: Add DPTF asl files   Simon Glass
• [PATCH v3 05/57] x86: apl: Correct PCIE_ECAM_BASE   Simon Glass
• [PATCH v3 06/57] x86: Add a config for the systemagent PCIEX regions size   Simon Glass
• [PATCH v3 07/57] x86: Add a common global NVS structure   Simon Glass
• [PATCH v3 08/57] x86: acpi: Support external GNVS tables   Simon Glass
• [PATCH v3 09/57] x86: acpi: Expand the GNVS   Simon Glass
• [PATCH v3 10/57] x86: coral: Add ACPI tables for coral   Simon Glass
• [PATCH v3 11/57] acpi: Add support for writing a _PRW   Simon Glass
• [PATCH v3 12/57] acpi: Add support for conditions and return values   Simon Glass
• [PATCH v3 13/57] acpi: Support generating a multi-function _DSM for devices   Simon Glass
• [PATCH v3 14/57] dm: acpi: Use correct GPIO polarity type in acpi_dp_add_gpio()   Simon Glass
• [PATCH v3 15/57] x86: link: Allow more space for U-Boot   Simon Glass
• [PATCH v3 16/57] i2c: Add a generic driver to generate ACPI info   Simon Glass
• [PATCH v3 17/57] x86: Add wake sources for the acpi_gpe driver   Simon Glass
• [PATCH v3 18/57] x86: apl: Support writing the IntelGraphicsMem table   Simon Glass
• [PATCH v3 19/57] x86: acpi: Add a common routine to write WiFi info   Simon Glass
• [PATCH v3 20/57] x86: Add some definitions for SMM   Simon Glass
• [PATCH v3 21/57] x86: apl: Add power-management definitions   Simon Glass
• [PATCH v3 22/57] x86: apl: Update iomap for ACPI   Simon Glass
• [PATCH v3 23/57] x86: Add a few common Intel CPU functions   Simon Glass
• [PATCH v3 24/57] x86: acpi: Support generation of the HPET table   Simon Glass
• [PATCH v3 25/57] x86: acpi: Support generation of the DBG2 table   Simon Glass
• [PATCH v3 26/57] acpi: Add support for generating processor tables   Simon Glass
• [PATCH v3 27/57] x86: acpi: Add PCT and PTC tables   Simon Glass
• [PATCH v3 28/57] acpi: Add more support for generating processor tables   Simon Glass
• [PATCH v3 29/57] x86: acpi: Add common Intel ACPI tables   Simon Glass
• [PATCH v3 30/57] x86: Support Atom SoCs using SWSMISCI rather than the SWSCI   Simon Glass
• [PATCH v3 31/57] x86: acpi: Add support for additional Intel tables   Simon Glass
• [PATCH v3 32/57] x86: apl: Allow reading hostbridge base addresses   Simon Glass
• [PATCH v3 33/57] p2sb: Add some definitions used for ACPI   Simon Glass
• [PATCH v3 34/57] x86: apl: Generate required ACPI tables   Simon Glass
• [PATCH v3 35/57] x86: apl: Add support for hostbridge ACPI generation   Simon Glass
• [PATCH v3 36/57] x86: apl: Generate CPU tables   Simon Glass
• [PATCH v3 37/57] x86: apl: Generate ACPI table for LPC   Simon Glass
• [PATCH v3 38/57] x86: apl: Drop unnecessary code in PMC driver   Simon Glass
• [PATCH v3 39/57] tpm: cr50: Add ACPI support   Simon Glass
• [PATCH v3 40/57] x86: fsp: Update the FSP API with the end-firmware method   Simon Glass
• [PATCH v3 41/57] x86: cpu: Report address width from cpu_get_info()   Simon Glass
• [PATCH v3 42/57] x86: Sort the MTRR table   Simon Glass
• [PATCH v3 43/57] x86: Notify the FSP of the 'end firmware' event   Simon Glass
• [PATCH v3 44/57] x86: Correct the assembly guard in e820.h   Simon Glass
• [PATCH v3 45/57] x86: Add a header guard to asm/acpi_table.h   Simon Glass
• [PATCH v3 46/57] x86: Correct handling of MADT table CPUs   Simon Glass
• [PATCH v3 47/57] acpi: tpm: Add a TPM2 table   Simon Glass
• [PATCH v3 48/57] acpi: tpm: Add a TPM1 table   Simon Glass
• [PATCH v3 49/57] x86: acpi: Set the log category for x86 table generation   Simon Glass
• [PATCH v3 50/57] x86: coral: Add audio descriptor files   Simon Glass
• [PATCH v3 51/57] x86: apl: Check low-level init in FSP-S pre-init   Simon Glass
• [PATCH v3 52/57] x86: fsp: Add more debugging for silicon init   Simon Glass
• [PATCH v3 53/57] x86: fsp: Show FSP-S or FSP-M address in fsp_get_header()   Simon Glass
• [PATCH v3 54/57] acpi: Use defines for field lengths   Simon Glass
• [PATCH v3 55/57] x86: Add a way to add to the e820 memory table   Simon Glass
• [PATCH v3 56/57] x86: Move include of bitops out of ACPI region   Simon Glass
• [PATCH v3 57/57] x86: coral: Update config and device tree for ACPI   Simon Glass
• [PATCH v2 1/3] arm64: Mention 4K aligned load addresses in the PIE Kconfig help   André Przywara
• [PATCH v2] configs: powerpc: Don't set CONFIG_ENV_ADDR for QorIQ SPIFLASH   Chris Packham
• [PATCH v7 05/21] arm: mvebu: x530: Use tiny SPI NOR   Chris Packham
• [PATCH v7 05/21] arm: mvebu: x530: Use tiny SPI NOR   Chris Packham
• [PATCH 0/8] PinePhone automatic device tree selection   André Przywara
• Fwd: [PATCH 1/1] espresso7420: remove unused symbol CONFIG_DEFAULT_CONSOLE   Thomas Abraham
• [PATCH 2/5] binman: Show an error when a file is missing   Simon Glass
• [PATCH] time: Fix get_ticks being non-monotonic   Simon Glass
• [PATCH v3 1/7] wdt: dw: Switch to using fls for log2   Simon Glass
• [PATCH v3 7/7] riscv: Enable watchdog for the k210   Simon Glass
• [RFC PATCH 1/1] image: add anti rollback protection for FIT Images   Simon Glass
• [PATCH] spl: Kconfig: Record proper dependency for SPL_ATF   Simon Glass
• [PATCH 1/2] spl: Use standard FIT entries   Simon Glass
• [PATCH 2/2] spl: fdt: Record load/entry fit-images entries in 64bit format   Simon Glass
• [PATCH 0/2] Add support for loading images above 4GB   Simon Glass
• [PATCH] Makefile: mrproper shall delete doc/output/   Simon Glass
• [PATCH v2 02/30] clk: export generic routines   Simon Glass
• [PATCH v2 15/30] fdt: translate address if #size-cells = <0>   Simon Glass
• [PATCH] acpi: device: Fix check for sequence number   Simon Glass
• [RFC 3/4] dtoc: add support for generate stuct udevice_id   Simon Glass
• chromebook_coral: build failure   Simon Glass
• [PATCH] time: Fix get_ticks being non-monotonic   Sean Anderson
• [PATCH v2 1/3] cosmetic: aspeed: ast2500: Rename clock header   ChiaWei Wang
• [PATCH v2 2/3] clock:aspeed: Sync with Linux kernel clock header define   ChiaWei Wang
• [PATCH v2 3/3] cosmetic: aspeed: Modify for SPDX-License   ChiaWei Wang
• [PATCH v7 05/21] arm: mvebu: x530: Use tiny SPI NOR   Pratyush Yadav
• [v4, 00/11] mmc: fsl_esdhc: support eMMC HS200/HS400 modes   Y.b. Lu
• [PATCH 0/7] Refactor generic fastboot_set_reboot_flag implementation   Roman Kovalivskyi
• [PATCH 1/7] cmd: bcb: Extract '__bcb_load' from 'do_bcb_load' for internal needs   Roman Kovalivskyi
• [PATCH 1/2] Revert "fastboot: Add default fastboot_set_reboot_flag implementation"   Roman Kovalivskyi
• [PATCH 2/7] cmd: bcb: Extract '__bcb_set' from 'do_bcb_set' for internal needs   Roman Kovalivskyi
• [PATCH 2/2] fastboot: Implement generic fastboot_set_reboot_flag   Roman Kovalivskyi
• [PATCH 3/7] cmd: bcb: Extract '__bcb_store' from 'do_bcb_store' for internal needs   Roman Kovalivskyi
• [PATCH 4/7] cmd: bcb: Expose 'bcb_write_reboot_reason' to external callers   Roman Kovalivskyi
• [PATCH 5/7] cmd: bcb: Add support for processing const string literals in bcb_set()   Roman Kovalivskyi
• [PATCH 6/7] Revert "fastboot: Add default fastboot_set_reboot_flag implementation"   Roman Kovalivskyi
• [PATCH 7/7] fastboot: Implement generic fastboot_set_reboot_flag   Roman Kovalivskyi
• [PATCH 1/1] espresso7420: remove unused symbol CONFIG_DEFAULT_CONSOLE   Minkyu Kang
• [PATCH] arm: mvebu: Espressobin: Set environment variable fdtfile   Andre Heider
• [PATCH 0/2] Refactor ASPEED AST2500 DDR SDRAM driver structure   Dylan Hung
• [PATCH 1/2] ram: move aspeed ram driver into drivers/ directory   Dylan Hung
• [PATCH 2/2] ram: add ddr4 dual x8 configuration   Dylan Hung
• [PATCH v2 19/30] pwm: ti: am33xx: add subsystem driver   Lokesh Vutla
• [PATCH v6 00/17] efi_loader: add capsule update support   AKASHI Takahiro
• [PATCH v6 01/17] dfu: rename dfu_tftp_write() to dfu_write_by_name()   AKASHI Takahiro
• [PATCH v6 02/17] dfu: modify an argument type for an address   AKASHI Takahiro
• [PATCH v6 03/17] common: update: add a generic interface for FIT image   AKASHI Takahiro
• [PATCH v6 04/17] dfu: export dfu_list   AKASHI Takahiro
• [PATCH v6 05/17] efi_loader: add option to initialise EFI subsystem early   AKASHI Takahiro
• [PATCH v6 06/17] efi_loader: add efi_create_indexed_name()   AKASHI Takahiro
• [PATCH v6 07/17] efi_loader: define UpdateCapsule api   AKASHI Takahiro
• [PATCH v6 08/17] efi_loader: capsule: add capsule_on_disk support   AKASHI Takahiro
• [PATCH v6 09/17] efi_loader: capsule: add memory range capsule definitions   AKASHI Takahiro
• [PATCH v6 10/17] efi_loader: capsule: support firmware update   AKASHI Takahiro
• [PATCH v6 11/17] efi_loader: add firmware management protocol for FIT image   AKASHI Takahiro
• [PATCH v6 12/17] dfu: add dfu_write_by_alt()   AKASHI Takahiro
• [PATCH v6 13/17] efi_loader: add firmware management protocol for raw image   AKASHI Takahiro
• [PATCH v6 14/17] cmd: add "efidebug capsule" command   AKASHI Takahiro
• [PATCH v6 15/17] tools: add mkeficapsule command for UEFI capsule update   AKASHI Takahiro
• [PATCH v6 16/17] test/py: efi_capsule: test for FIT image capsule   AKASHI Takahiro
• [PATCH v6 17/17] test/py: efi_capsule: test for raw image capsule   AKASHI Takahiro
• [PATCH v3 01/12] binman: Allow entry args to be required   Michal Simek
• [PATCH v4] arm: socfpga: add board support for ic-automation Moritz III   Nico Becker
• [PATCH 5/5] arm: mach-omap2: am33xx: Add device structure for spi   Lokesh Vutla
• [PATCH 3/5] spi: spi-uclass: Block dm_scan_fdt_dev with OF_CONTROL to prevent build failures   Lokesh Vutla
• [PATCH] mtd: spi-nor-ids: add support for Macronix mx25u12835f flash   Andre Heider
• [PATCH] arm64: a37xx: increase CONFIG_SYS_BOOTM_LEN to 64MB   Andre Heider
• [PATCH 5/5] arm: mach-omap2: am33xx: Add device structure for spi   Faiz Abbas
• [PATCH v3 1/9] usb: xhci: add a member hci_version in xhci_ctrl struct   Chunfeng Yun
• [PATCH v3 2/9] usb: xhci: create one unified function to calculate TRB TD remainder.   Chunfeng Yun
• [PATCH v3 3/9] usb: xhci: add quirks flag to support MediaTek xHCI 0.96   Chunfeng Yun
• [PATCH v3 4/9] usb: xhci: convert to HCS_MAX_PORTS()   Chunfeng Yun
• [PATCH v3 5/9] usb: xhci: convert to TRB_TYPE()   Chunfeng Yun
• [PATCH v3 6/9] usb: xhci: convert to TRB_LEN() and TRB_INTR_TARGET()   Chunfeng Yun
• [PATCH v3 7/9] usb: xhci: convert to TRB_TX_TYPE()   Chunfeng Yun
• [PATCH v3 8/9] usb: xhci: use macros with parameter to fill ep_info2   Chunfeng Yun
• [PATCH v3 9/9] usb: xhci: convert to readx_poll_sleep_timeout()   Chunfeng Yun
• [PATCH RESEND v2 05/11] usb: xhci: convert to TRB_TYPE()   Chunfeng Yun
• [v4, 00/11] mmc: fsl_esdhc: support eMMC HS200/HS400 modes   Jaehoon Chung
• [PATCH v4] arm: socfpga: add board support for ic-automation Moritz III   Tan, Ley Foon
• [PATCH] arm: mvebu: Espressobin: Set environment variable fdtfile   Pali Rohár
• [PATCH 0/5] edison: Support for writing an xFSTK image   Andy Shevchenko
• [PATCH 5/5] arm: mach-omap2: am33xx: Add device structure for spi   Vignesh Raghavendra
• [PATCH 0/2] Refactor ASPEED AST2500 DDR SDRAM driver structure   Dylan Hung
• [PATCH 1/2] ram: move aspeed ram driver into drivers/ directory   Dylan Hung
• [PATCH 2/2] ram: add ddr4 dual x8 configuration   Dylan Hung
• [PATCH 1/2] spl: Use standard FIT entries   Michal Simek
• [PATCH 2/2] spl: fdt: Record load/entry fit-images entries in 64bit format   Michal Simek
• [PATCH] ARM: stm32: Use firwmare property instead of loadables   Michal Simek
• [PATCH v4 0/3] binman: Further updates for FIT support   Michal Simek
• [PATCH] arm: mvebu: Espressobin: Set environment variable fdtfile   Andre Heider
• [PATCH] ARM: stm32: Use firwmare property instead of loadables   Michal Simek
• [PATCH] arm: mvebu: Espressobin: Set environment variable fdtfile   Pali Rohár
• [PATCH 2/2] spl: fdt: Record load/entry fit-images entries in 64bit format   Michal Simek
• Change in gic_lpi_tables_init() function   Priyanka Jain
• [PATCH 0/2] Add support for loading images above 4GB   Michal Simek
• [PATCH 2/5] binman: Show an error when a file is missing   Andy Shevchenko
• Change in gic_lpi_tables_init() function   Rayagonda Kokatanur
• [PATCH v4] arm: socfpga: add board support for ic-automation Moritz III   Tan, Ley Foon
• [PATCH v2 08/21] clk: at91: move clock code to compat.c   Eugen.Hristev at microchip.com
• [PATCH v2 4/6] mmc: atmel-sdhci: do not check clk_set_rate return value   Eugen.Hristev at microchip.com
• [PATCH] am335x, guardian: update the maintainer list   Moses Christopher
• [PATCH v2 2/3] arm64: Bail out PIE builds early if load address is not 4K aligned   Edgar E. Iglesias
• [PATCH v2 1/3] arm64: Mention 4K aligned load addresses in the PIE Kconfig help   Edgar E. Iglesias
• Pull request for UEFI sub-system for efi-2020-10-rc4   Heinrich Schuchardt
• [PATCH v3 0/2] Add support for LX2162AQDS board   meenakshi.aggarwal at nxp.com
• [PATCH v3 1/2] armv8: lx2162a: Add Soc changes to support LX2162A   meenakshi.aggarwal at nxp.com
• [PATCH v3 2/2] armv8: lx2162aqds: Add support for LX2162AQDS platform   meenakshi.aggarwal at nxp.com
• [PATCH RESEND v2 05/11] usb: xhci: convert to TRB_TYPE()   Bin Meng
• [PATCH 5/5] arm: mach-omap2: am33xx: Add device structure for spi   Faiz Abbas
• [PATCH 2/5] configs: Add spiboot support for am335x   Lokesh Vutla
• [PATCH 4/5] spi: omap3_spi: Read platform data in ofdata_to_platdata()   Vignesh Raghavendra
• [PATCH 4/5] spi: omap3_spi: Read platform data in ofdata_to_platdata()   Vignesh Raghavendra
• [PATCH 5/5] arm: mach-omap2: am33xx: Add device structure for spi   Vignesh Raghavendra
• [PATCH v6 1/2] board: kontron: add sl28 support   Michael Walle
• [PATCH v2 2/3] arm64: Bail out PIE builds early if load address is not 4K aligned   Tom Rini
• [PATCH v3 08/12] sunxi: Convert 64-bit boards to use binman   Michal Simek
• [PATCH v3 1/2] armv8: lx2162a: Add Soc changes to support LX2162A   Tom Rini
• [PATCH v3 2/2] armv8: lx2162aqds: Add support for LX2162AQDS platform   Tom Rini
• [PATCH v2 2/3] arm64: Bail out PIE builds early if load address is not 4K aligned   Edgar E. Iglesias
• [PATCH v3 08/12] sunxi: Convert 64-bit boards to use binman   Simon Glass
• [PATCH 2/5] binman: Show an error when a file is missing   Simon Glass
• [PATCH 0/2] Add support for loading images above 4GB   Simon Glass
• [PATCH 2/2] spl: fdt: Record load/entry fit-images entries in 64bit format   Simon Glass
• [PATCH v4 0/3] binman: Further updates for FIT support   Simon Glass
• [PATCH 1/2] spl: Use standard FIT entries   Simon Glass
• [PATCH 0/5] edison: Support for writing an xFSTK image   Simon Glass
• [PATCH v3 01/12] binman: Allow entry args to be required   Simon Glass
• [PATCH] time: Fix get_ticks being non-monotonic   Simon Glass
• [PATCH 0/5] edison: Support for writing an xFSTK image   Tom Rini
• [PATCH 0/5] edison: Support for writing an xFSTK image   Simon Glass
• RPi4 U-Boot freeze   Peter Robinson
• [PATCH v3 00/21] clk: at91: add sama7g5 support   Claudiu Beznea
• [PATCH v3 01/21] clk: check hw and hw->dev before dereference it   Claudiu Beznea
• [PATCH v3 02/21] dm: core: add support for device re-parenting   Claudiu Beznea
• [PATCH v3 03/21] clk: bind clk to new parent device   Claudiu Beznea
• [PATCH v3 04/21] clk: do not disable clock if it is critical   Claudiu Beznea
• [PATCH v3 05/21] clk: get clock pointer before proceeding   Claudiu Beznea
• [PATCH v3 06/21] clk: at91: add pre-requisite headers for AT91 clock architecture   Claudiu Beznea
• [PATCH v3 07/21] clk: at91: pmc: add helpers for clock drivers   Claudiu Beznea
• [PATCH v3 08/21] clk: at91: move clock code to compat.c   Claudiu Beznea
• [PATCH v3 09/21] clk: at91: sckc: add driver compatible with ccf   Claudiu Beznea
• [PATCH v3 10/21] clk: at91: clk-main: add driver compatible with ccf   Claudiu Beznea
• [PATCH v3 11/21] clk: at91: sam9x60-pll: add driver compatible with ccf   Claudiu Beznea
• [PATCH v3 12/21] clk: at91: clk-master: add driver compatible with ccf   Claudiu Beznea
• [PATCH v3 13/21] clk: at91: clk-master: add support for sama7g5   Claudiu Beznea
• [PATCH v3 14/21] clk: at91: clk-utmi: add driver compatible with ccf   Claudiu Beznea
• [PATCH v3 15/21] clk: at91: clk-utmi: add support for sama7g5   Claudiu Beznea
• [PATCH v3 16/21] clk: at91: clk-programmable: add driver compatible with ccf   Claudiu Beznea
• [PATCH v3 17/21] clk: at91: clk-system: add driver compatible with ccf   Claudiu Beznea
• [PATCH v3 18/21] clk: at91: clk-peripheral: add driver compatible with ccf   Claudiu Beznea
• [PATCH v3 19/21] clk: at91: clk-generic: add driver compatible with ccf   Claudiu Beznea
• [PATCH v3 20/21] clk: at91: pmc: add generic clock ops   Claudiu Beznea
• [PATCH v3 21/21] clk: at91: sama7g5: add clock support   Claudiu Beznea
• [PATCH v3 1/8] firmware: add SCMI agent uclass   Etienne Carriere
• [PATCH v3 2/8] firmware: scmi: mailbox/smt agent device   Etienne Carriere
• [PATCH v3 3/8] firmware: scmi: support Arm SMCCC transport   Etienne Carriere
• [PATCH v3 4/8] dt-bindings: arm: SCMI bindings documentation   Etienne Carriere
• [PATCH v3 5/8] clk: add clock driver for SCMI agents   Etienne Carriere
• [PATCH v3 6/8] firmware: scmi: sandbox test for SCMI clocks   Etienne Carriere
• [PATCH v3 7/8] reset: add reset controller driver for SCMI agents   Etienne Carriere
• [PATCH v3 8/8] firmware: smci: sandbox test for SCMI reset controllers   Etienne Carriere
• [PATCH 0/5] edison: Support for writing an xFSTK image   Andy Shevchenko
• [RFC PATCH 0/7]   Etienne Carriere
• [PATCH] timer: mchp-pit64b: add support for pit64b   Claudiu Beznea
• [PATCH] time: Fix get_ticks being non-monotonic   Sean Anderson
• [BUG] rsa: crash in br_i32_decode() called from rsa_gen_key_prop()   Heinrich Schuchardt
• [RFC] [PATCH] rockchip: Pinebook Pro: fix mmc boot ordering   lindsey.stanpoor at gmail.com
• Pull request for UEFI sub-system for efi-2020-10-rc4   Tom Rini
• [PATCH] ARM: zynq: Add Z-turn board V5   agriveaux at deutnet.info
• [PATCH v4 1/2] arch: arm: use dt and UCLASS_IRQ to get gic details   Rayagonda Kokatanur
• [PATCH] arm: mvebu: Espressobin: Set environment variable fdtfile   Andre Heider
• [RFC] FPGA configuration as MTD using Device Tree   Ulf Samuelsson
• [PATCH 0/7] riscv: Correctly handle IPIs already pending upon boot   Sean Anderson
• [PATCH 1/7] Revert "riscv: Clear pending interrupts before enabling IPIs"   Sean Anderson
• [PATCH 2/7] riscv: Match memory barriers between send_ipi_many and handle_ipi   Sean Anderson
• [PATCH 3/7] riscv: Use NULL as a sentinel value for smp_call_function   Sean Anderson
• [PATCH 4/7] riscv: Clear pending IPIs on initialization   Sean Anderson
• [PATCH 5/7] riscv: Add fence to available_harts_lock   Sean Anderson
• [PATCH 6/7] riscv: Ensure gp is NULL or points to valid data   Sean Anderson
• [PATCH 7/7] riscv: Add some comments to start.S   Sean Anderson
• [ANN] U-Boot v2020.10-rc4 released   Tom Rini
• [PATCH] timer: Return count from timer_ops.get_count   Sean Anderson
• [RFC 3/4] dtoc: add support for generate stuct udevice_id   Walter Lozano
• Changing U-boot relocation addres to SRAM (instead of DRAM)   Yusuf Altıparmak
• [PATCH v7 0/2] Basic Kontron SMARC-sAL28 board support   Michael Walle
• [PATCH v7 1/2] board: kontron: add sl28 support   Michael Walle
• [PATCH v7 2/2] board: sl28: add board specific nvm command   Michael Walle
• Please pull u-boot-marvell/remove-config-nr-dram-banks-v9-2020-08-26   Tom Rini
• [PATCH U-BOOT v3 03/30] fs: btrfs: Crossport btrfs_read_dev_super() from btrfs-progs   Tom Rini
• [PATCH U-BOOT v3 25/30] fs: btrfs: Implement btrfs_file_read()   Tom Rini
• [PATCH U-BOOT v3 03/30] fs: btrfs: Crossport btrfs_read_dev_super() from btrfs-progs   Marek Behun
• [BUG] rsa: crash in br_i32_decode() called from rsa_gen_key_prop()   AKASHI Takahiro
• [PATCH U-BOOT v3 25/30] fs: btrfs: Implement btrfs_file_read()   Qu Wenruo
• [PATCH U-BOOT v3 25/30] fs: btrfs: Implement btrfs_file_read()   Tom Rini
• [PATCH U-BOOT v3 25/30] fs: btrfs: Implement btrfs_file_read()   Qu Wenruo
• [v4, 00/11] mmc: fsl_esdhc: support eMMC HS200/HS400 modes   Peng Fan
• [PATCH v3 6/9] usb: xhci: convert to TRB_LEN() and TRB_INTR_TARGET()   Bin Meng
• [PATCH v3 7/9] usb: xhci: convert to TRB_TX_TYPE()   Bin Meng
• [PATCH v3 8/9] usb: xhci: use macros with parameter to fill ep_info2   Bin Meng
• [PATCH v3 9/9] usb: xhci: convert to readx_poll_sleep_timeout()   Bin Meng
• [PATCH 0/3] net: tftp: Fixes for tftp rollover   Tan, Ley Foon
• [PATCH v1] arm: socfpga: soc64: Disable CONFIG_PSCI_RESET   Tan, Ley Foon
• [PATCH v2] arm: dts: fix ast2500-evb inclusion for the correct soc family   Ryan Chen
• [PATCH v4 0/2] gpio: Add a managed API   Pratyush Yadav
• [PATCH v4 1/2] drivers: gpio: Add a managed API to get a GPIO from the device-tree   Pratyush Yadav
• [PATCH v4 2/2] test: gpio: Add tests for the managed API   Pratyush Yadav
• [PATCH v3 2/9] usb: xhci: create one unified function to calculate TRB TD remainder.   Bin Meng
• [PATCH v2 0/5] powerpc, mpc83xx: add DM_ETH support   Heiko Schocher
• [RFC PATCH 0/1] Anti rollback protection for FIT Images   Rasmus Villemoes
• [PATCH v3 1/2] armv8: lx2162a: Add Soc changes to support LX2162A   Meenakshi Aggarwal
• [PATCH] defconfig: espressobin: enable NET_RANDOM_ETHADDR   Andre Heider
• [v4, 00/11] mmc: fsl_esdhc: support eMMC HS200/HS400 modes   Stefan Roese
• [PATCH 0/2] Refactor AST2500 reset control   Chia-Wei, Wang
• [PATCH 1/2] reset: ast2500: Use SCU for reset control   Chia-Wei, Wang
• [PATCH 2/2] cosmetic: reset: ast2500: Rename driver and configs   Chia-Wei, Wang
• [PATCH v3 6/9] usb: xhci: convert to TRB_LEN() and TRB_INTR_TARGET()   Chunfeng Yun
• [PATCH v3 2/9] usb: xhci: create one unified function to calculate TRB TD remainder.   Chunfeng Yun
• [PATCH] defconfig: espressobin: enable NET_RANDOM_ETHADDR   Pali Rohár
• [PATCH v3 1/7] riscv: Rework riscv timer driver to only support S-mode   Pragnesh Patel
• [PATCH v4 1/9] usb: xhci: add a member hci_version in xhci_ctrl struct   Chunfeng Yun
• [PATCH v4 2/9] usb: xhci: create one unified function to calculate TRB TD remainder   Chunfeng Yun
• [PATCH v4 3/9] usb: xhci: add quirks flag to support MediaTek xHCI 0.96   Chunfeng Yun
• [PATCH v4 4/9] usb: xhci: convert to HCS_MAX_PORTS()   Chunfeng Yun
• [PATCH v4 5/9] usb: xhci: convert to TRB_TYPE()   Chunfeng Yun
• [PATCH v4 6/9] usb: xhci: convert to TRB_LEN() and TRB_INTR_TARGET()   Chunfeng Yun
• [PATCH v4 7/9] usb: xhci: convert to TRB_TX_TYPE()   Chunfeng Yun
• [PATCH v4 8/9] usb: xhci: use macros with parameter to fill ep_info2   Chunfeng Yun
• [PATCH v4 9/9] usb: xhci: convert to readx_poll_sleep_timeout()   Chunfeng Yun
• [PATCH] defconfig: espressobin: enable NET_RANDOM_ETHADDR   Andre Heider
• [PATCH] include: dt-bindings: Add MSCC header   Michal Simek
• [PATCH 1/1] lib: rsa: fix data abort in br_i32_decode()   Heinrich Schuchardt
• [PATCH 1/1] efi_loader: efi_var_mem_notify_exit_boot_services   Heinrich Schuchardt
• [PATCH 1/1] efi_loader: efi_var_mem_notify_exit_boot_services   Ilias Apalodimas
• [PATCH v3 9/9] usb: xhci: convert to readx_poll_sleep_timeout()   Marek Vasut
• [PATCH v3 9/9] usb: xhci: convert to readx_poll_sleep_timeout()   Chunfeng Yun
• Changing U-boot relocation addres to SRAM (instead of DRAM)   Joakim Tjernlund
• [PATCH v3 4/7] riscv: Rework Sifive CLINT as UCLASS_TIMER driver   Pragnesh Patel
• [PATCH v3 7/7] riscv: Update SiFive device tree for new CLINT driver   Pragnesh Patel
• [PATCH v3 1/7] riscv: Rework riscv timer driver to only support S-mode   Sean Anderson
• [PATCH 5/5] arm: mach-omap2: am33xx: Add device structure for spi   Faiz Abbas
• [PATCH] defconfig: espressobin: enable NET_RANDOM_ETHADDR   Tom Rini
• [PATCH v3 00/21] clk: at91: add sama7g5 support   Eugen.Hristev at microchip.com
• [PATCH] board: atmel: common: introduce at91_set_eth1addr for second interface   Eugen.Hristev at microchip.com
• [PATCH] ARM: at91: common: guard ATMEL_PIT code by ifdef   Eugen.Hristev at microchip.com
• make_fit_atf.py and multiple U-Boot ELF segments   Tom Rini
• [PATCH v1] x86: edison: Move config SYS_MALLOC_LEN to Kconfig   Andy Shevchenko
• [PATCH v2 01/16] x86: Update the bootparam header   Andy Shevchenko
• [PATCH v4 1/2] drivers: gpio: Add a managed API to get a GPIO from the device-tree   Heinrich Schuchardt
• [PATCH v1] cmd: acpi: Print revisions in hex format   Andy Shevchenko
• [PATCH v1] cmd: acpi: Print revisions in hex format   Wolfgang Wallner
• [PATCH v4 1/2] drivers: gpio: Add a managed API to get a GPIO from the device-tree   Pratyush Yadav
• [PATCH v1] cmd: acpi: Print revisions in hex format   Andy Shevchenko
• [PATCH v3 1/8] firmware: add SCMI agent uclass   Simon Glass
• [PATCH v3 2/8] firmware: scmi: mailbox/smt agent device   Simon Glass
• [PATCH v3 3/8] firmware: scmi: support Arm SMCCC transport   Simon Glass
• [PATCH v3 5/8] clk: add clock driver for SCMI agents   Simon Glass
• [PATCH v3 6/8] firmware: scmi: sandbox test for SCMI clocks   Simon Glass
• [PATCH v3 7/8] reset: add reset controller driver for SCMI agents   Simon Glass
• [PATCH v3 8/8] firmware: smci: sandbox test for SCMI reset controllers   Simon Glass
• [PATCH v4 1/2] drivers: gpio: Add a managed API to get a GPIO from the device-tree   Heinrich Schuchardt
• [PATCH v1] cmd: acpi: Print revisions in hex format   Wolfgang Wallner
• [PATCH v3 9/9] usb: xhci: convert to readx_poll_sleep_timeout()   Bin Meng
• [PATCH v1] cmd: acpi: Print revisions in hex format   Andy Shevchenko
• [PATCH v3 9/9] usb: xhci: convert to readx_poll_sleep_timeout()   Marek Vasut
• [PATCH v3 9/9] usb: xhci: convert to readx_poll_sleep_timeout()   Frank Wunderlich
• [PATCH v4 2/3] binman: Support help messages for missing blobs   Alper Nebi Yasak
• [PATCH v3 9/9] usb: xhci: convert to readx_poll_sleep_timeout()   Marek Vasut
• [PATCH RESEND v4 1/9] usb: xhci: add a member hci_version in xhci_ctrl struct   Frank Wunderlich
• [PATCH RESEND v4 2/9] usb: xhci: create one unified function to calculate TRB TD remainder   Frank Wunderlich
• [PATCH RESEND v4 3/9] usb: xhci: add quirks flag to support MediaTek xHCI 0.96   Frank Wunderlich
• [PATCH RESEND v4 4/9] usb: xhci: convert to HCS_MAX_PORTS()   Frank Wunderlich
• [PATCH RESEND v4 5/9] usb: xhci: convert to TRB_TYPE()   Frank Wunderlich
• [PATCH RESEND v4 6/9] usb: xhci: convert to TRB_LEN() and TRB_INTR_TARGET()   Frank Wunderlich
• [PATCH RESEND v4 7/9] usb: xhci: convert to TRB_TX_TYPE()   Frank Wunderlich
• [PATCH RESEND v4 8/9] usb: xhci: use macros with parameter to fill ep_info2   Frank Wunderlich
• [PATCH RESEND v4 9/9] usb: xhci: convert to readx_poll_sleep_timeout()   Frank Wunderlich
• [PATCH v3 9/9] usb: xhci: convert to readx_poll_sleep_timeout()   Frank Wunderlich
• make_fit_atf.py and multiple U-Boot ELF segments   Simon Glass
• [PATCH v3 9/9] usb: xhci: convert to readx_poll_sleep_timeout()   Marek Vasut
• [PATCH v4 1/3] binman: Allow selecting default FIT configuration   Alper Nebi Yasak
• [PATCH v7 1/2] board: kontron: add sl28 support   Tom Rini
• [PATCH U-BOOT v3 00/30] PLEASE TEST fs: btrfs: Re-implement btrfs support using code from btrfs-progs   Tom Rini
• [PATCH v2 2/3] arm64: Bail out PIE builds early if load address is not 4K aligned   Stephen Warren
• [PATCH] defconfig: espressobin: enable NET_RANDOM_ETHADDR   Pali Rohár
• [PATCH v7 05/21] arm: mvebu: x530: Use tiny SPI NOR   Chris Packham
• [PATCH v1] x86: edison: Move config SYS_MALLOC_LEN to Kconfig   Simon Glass
• [PATCH 1/1] lib: rsa: fix data abort in br_i32_decode()   Simon Glass
• [PATCH] timer: Return count from timer_ops.get_count   Simon Glass
• [PATCH v4 2/2] test: gpio: Add tests for the managed API   Simon Glass
• [PATCH] time: Fix get_ticks being non-monotonic   Simon Glass
• [PATCH v4 1/3] binman: Allow selecting default FIT configuration   Simon Glass
• [PATCH v4 2/3] binman: Support help messages for missing blobs   Simon Glass
• [PATCH] time: Fix get_ticks being non-monotonic   Sean Anderson
• [PATCH] timer: Return count from timer_ops.get_count   Sean Anderson
• [PATCH] time: Fix get_ticks being non-monotonic   Simon Glass
• [PATCH] time: Fix get_ticks being non-monotonic   Sean Anderson
• [PATCH] cmd: mem: fix range of bitflip test   Ralph Siemsen
• [PATCH v3 9/9] usb: xhci: convert to readx_poll_sleep_timeout()   Bin Meng
• [PATCH 0/7] riscv: Correctly handle IPIs already pending upon boot   Rick Chen
• [PATCH 0/7] riscv: Correctly handle IPIs already pending upon boot   Sean Anderson
• [PATCH 0/7] riscv: Correctly handle IPIs already pending upon boot   Sean Anderson
• [RFCv2] common: Drop remaining includes in common.h   Simon Glass
• [PATCH v4 2/2] test: gpio: Add tests for the managed API   Pratyush Yadav
• [PATCH 0/3] Add i2c support for MediaTek mt8512   mingming lee
• [PATCH 1/3] i2c: mediatek: add basic driver support   mingming lee
• [PATCH 2/3] ARM: dts: Mediatek: add i2c node support for mt8512   mingming lee
• [PATCH 3/3] configs: mt8512: Enable I2C related configs   mingming lee
• [PATCH v2 1/3] cosmetic: aspeed: ast2500: Rename clock header   Cédric Le Goater
• [PATCH v3 2/2] armv8: lx2162aqds: Add support for LX2162AQDS platform   Meenakshi Aggarwal
• [PATCH v2 2/3] clock:aspeed: Sync with Linux kernel clock header define   Cédric Le Goater
• [PATCH v2 3/3] cosmetic: aspeed: Modify for SPDX-License   Cédric Le Goater
• [PATCH v1] cmd: acpi: Print revisions in hex format   Wolfgang Wallner
• [PATCH] for [BUG] rsa: crash in br_i32_decode() called from rsa_gen_key_prop() (Heinrich Schuchardt)   REITHER Robert - Contractor
• [PATCH v5] arm: socfpga: add board support for ic-automation Moritz III   Nico Becker
• [PATCH 1/7] Revert "riscv: Clear pending interrupts before enabling IPIs"   Rick Chen
• [GIT PULL] rpi: second round for v2020.10   Matthias Brugger
• [PATCH] arm: gic-v3-its: Add irq UCLASS_DRIVER   Priyanka Jain
• [PATCH] arm: gic-v3-its: Add irq UCLASS_DRIVER   Stefan Roese
• [PATCH v7 05/21] arm: mvebu: x530: Use tiny SPI NOR   Stefan Roese
• [PATCH 3/7] riscv: Use NULL as a sentinel value for smp_call_function   Rick Chen
• [PATCH] armv8: lx2160a: fix reset sequence   meenakshi.aggarwal at nxp.com
• [PATCH] cmd: mem: fix range of bitflip test   Stefan Roese
• [PATCH v1] cmd: acpi: Print revisions in hex format   Andy Shevchenko
• [PATCH 3/7] riscv: Use NULL as a sentinel value for smp_call_function   Rick Chen
• [PATCH v2 3/3] arm64: dts: a3720: add support for espressobin with populated emmc   Andre Heider
• [PATCH v3 2/8] firmware: scmi: mailbox/smt agent device   Etienne Carriere
• [PATCH v3 3/8] firmware: scmi: support Arm SMCCC transport   Etienne Carriere
• [PATCH v3 6/8] firmware: scmi: sandbox test for SCMI clocks   Etienne Carriere
• [PATCH v3 9/9] usb: xhci: convert to readx_poll_sleep_timeout()   Marek Vasut
• [PATCH v3 0/2] reset: Add a managed API   Pratyush Yadav
• [PATCH v3 1/2] drivers: reset: Add a managed API to get reset controllers from the DT   Pratyush Yadav
• [PATCH v3 2/2] test: reset: Add tests for the managed API   Pratyush Yadav
• [PATCH v3 0/2] reset: Add a managed API   Pratyush Yadav
• [PATCH 3/7] riscv: Use NULL as a sentinel value for smp_call_function   Sean Anderson
• [PATCH 1/7] Revert "riscv: Clear pending interrupts before enabling IPIs"   Sean Anderson
• [PATCH 3/7] riscv: Use NULL as a sentinel value for smp_call_function   Heinrich Schuchardt
• [PATCH 3/7] riscv: Use NULL as a sentinel value for smp_call_function   Sean Anderson
• [RESEND PATCH v5] Add board support for ic-automation Moritz III   Nico Becker
• [PATCH] ARM: mvebu: clearfog: don't override set fdtfile env   Baruch Siach
• [PATCH v3 2/2] armv8: lx2162aqds: Add support for LX2162AQDS platform   Tom Rini
• [PATCH] ARM: dts: stm32: Pull UART4 RX high on AV96   Patrick DELAUNAY
• [PATCH] ARM: dts: stm32: Adjust PLL4 settings on AV96 again   Patrick DELAUNAY
• [PATCH v6 01/17] dfu: rename dfu_tftp_write() to dfu_write_by_name()   Heinrich Schuchardt
• [PATCH 1/2] x86: acpi: Fix calculation of DSDT length   Wolfgang Wallner
• [PATCH 2/2] x86: acpi: Add memset to initialize SPCR table   Wolfgang Wallner
• [PATCH v2] cmd: mem: fix range of bitflip test   Ralph Siemsen
• [PATCH] cmd: mem: fix range of bitflip test   Ralph Siemsen
• [PATCH 1/2] x86: acpi: Fix calculation of DSDT length   Andy Shevchenko
• [PATCH 2/2] x86: acpi: Add memset to initialize SPCR table   Andy Shevchenko
• [PATCH 1/2] x86: acpi: Fix calculation of DSDT length   Andy Shevchenko
• U-boot command prompt failed to load in Raspberry pi 4   satish reddy
• [PATCH 1/4] fastboot: mmc: Add CONFIG_FASTBOOT_MMC_USER_SUPPORT   Patrick Delaunay
• [PATCH 2/4] fastboot: mmc: extend flash/erase for both emmc hwpart 1 and 2   Patrick Delaunay
• [PATCH 3/4] fastboot: add command to select the default emmc hwpart for boot   Patrick Delaunay
• [PATCH 4/4] fastboot: add command to select the eMMC boot configuration   Patrick Delaunay
• [PATCH 1/4] configs: stm32mp1: enable fastboot support of eMMC boot partition   Patrick Delaunay
• [PATCH 2/4] configs: stm32mp1: enable the fastboot oem command format   Patrick Delaunay
• [PATCH 3/4] configs: stm32mp1: enable the fastboot oem command partconf   Patrick Delaunay
• [PATCH 4/4] configs: stm32mp1: enable the fastboot oem command bootbus   Patrick Delaunay
• [PATCH RESEND v4 2/9] usb: xhci: create one unified function to calculate TRB TD remainder   Marek Vasut
• [PATCH] cmd: mem: fix range of bitflip test   Stefan Roese
• [PATCH v2] cmd: mem: fix range of bitflip test   Stefan Roese
• [PATCH v3 9/9] usb: xhci: convert to readx_poll_sleep_timeout()   Bin Meng
• [PATCH] cmd: mem: fix range of bitflip test   Ralph Siemsen
• [PATCH] cmd: mem: fix range of bitflip test   Stefan Roese
• [PATCH v3 9/9] usb: xhci: convert to readx_poll_sleep_timeout()   Marek Vasut
• [PATCH v3 9/9] usb: xhci: convert to readx_poll_sleep_timeout()   Bin Meng
• [PATCH v3 9/9] usb: xhci: convert to readx_poll_sleep_timeout()   Tom Rini
• [PATCH v3 9/9] usb: xhci: convert to readx_poll_sleep_timeout()   Marek Vasut
• [GIT PULL] rpi: second round for v2020.10   Tom Rini
• [PATCH v4 2/2] test: gpio: Add tests for the managed API   Simon Glass
• [PATCH v3 3/8] firmware: scmi: support Arm SMCCC transport   Simon Glass
• [PATCH v3 6/8] firmware: scmi: sandbox test for SCMI clocks   Simon Glass
• [PATCH 2/2] x86: acpi: Add memset to initialize SPCR table   Simon Glass
• [PATCH 1/2] x86: acpi: Fix calculation of DSDT length   Simon Glass
• [PATCH v6 00/17] efi_loader: add capsule update support   Heinrich Schuchardt
• [PATCH v3 6/8] firmware: scmi: sandbox test for SCMI clocks   Etienne Carriere
• [PULL] Pull request: u-boot-stm32 for v2020.10= u-boot-stm32-20200909   Patrick DELAUNAY
• Recall: [PULL] Pull request: u-boot-stm32 for v2020.10= u-boot-stm32-20200909   Patrick DELAUNAY
• [PATCH] cmd: mem: fix range of bitflip test   Ralph Siemsen
• [PATCH] cmd: mem: fix range of bitflip test   Stefan Roese
• [PATCH] cmd: mem: fix range of bitflip test   Ralph Siemsen
• [PULL] Pull request: u-boot-stm32 for v2020.10= u-boot-stm32-20200909   Patrick DELAUNAY
• [PATCH v3] cmd: mem: fix range of bitflip test   Ralph Siemsen
• [PATCH v3] cmd: mem: fix range of bitflip test   Stefan Roese
• [PATCH v4] cmd: mem: fix range of bitflip test   Ralph Siemsen
• [PATCH 1/2] video: stm32_ltdc: Convert to use APIs which support live DT   Patrick Delaunay
• [PATCH 2/2] video: stm32_dsi: Convert to use APIs which support live DT   Patrick Delaunay
• [PATCH] mailbox: stm32_ipcc: Convert to use APIs which support live DT   Patrick Delaunay
• [PATCH 1/2] pinctrl: stm32: Convert to use APIs which support live DT   Patrick Delaunay
• [PATCH 2/2] pinctrl: stm32: Add header with SPDX licence   Patrick Delaunay
• [PATCH v5] cmd: mem: fix range of bitflip test   Ralph Siemsen
• [PATCH] gpio: Convert to use APIs which support live DT   Patrick Delaunay
• [PATCH 1/2] gpio: stm32: cosmetic: cleanup gpio_stm32_probe   Patrick Delaunay
• [PATCH 2/2] gpio: stm32: check result of ofnode_phandle_args   Patrick Delaunay
• [PATCH] net: dwc_eth_qos: Convert to use APIs which support live DT   Patrick Delaunay
• [PATCH v4 1/8] firmware: add SCMI agent uclass   Etienne Carriere
• [PATCH v4 2/8] firmware: scmi: mailbox/smt agent device   Etienne Carriere
• [PATCH v4 3/8] firmware: scmi: support Arm SMCCC transport   Etienne Carriere
• [PATCH v4 4/8] dt-bindings: arm: SCMI bindings documentation   Etienne Carriere
• [PATCH v4 5/8] clk: add clock driver for SCMI agents   Etienne Carriere
• [PATCH v4 6/8] firmware: scmi: sandbox test for SCMI clocks   Etienne Carriere
• [PATCH v4 7/8] reset: add reset controller driver for SCMI agents   Etienne Carriere
• [PATCH v4 8/8] firmware: smci: sandbox test for SCMI reset controllers   Etienne Carriere
• [PATCH v6 00/17] efi_loader: add capsule update support   Tom Rini
• command documentation   Jasper van Santen
• [PATCH v3 0/4] arm64: Large PIE fixes   Edgar E. Iglesias
• [PATCH v3 1/4] arm64: Mention 4K aligned load addresses in the PIE Kconfig help   Edgar E. Iglesias
• [PATCH v3 2/4] arm64: Trap PIE builds early if load address is not 4K aligned   Edgar E. Iglesias
• [PATCH v3 3/4] arm64: Add support for larger PIE U-Boot   Edgar E. Iglesias
• [PATCH v3 4/4] arm64: Trap non-PIE builds early if starting from wrong address   Edgar E. Iglesias
• [PATCH] arm: gic-v3-its: Add irq UCLASS_DRIVER   Rayagonda Kokatanur
• command documentation   Ralph Siemsen
• [PATCH v3 0/4] arm64: Large PIE fixes   Stephen Warren
• [GIT PULL] rpi: second round for v2020.10   Petr Tesarik
• [PULL] Pull request: u-boot-stm32 for v2020.10= u-boot-stm32-20200909   Tom Rini
• [PATCH v4 0/8] riscv: Clean up timer drivers   Sean Anderson
• [PATCH v4 1/8] riscv: Rework riscv timer driver to only support S-mode   Sean Anderson
• [PATCH v4 2/8] timer: Add helper for drivers using timebase fallback   Sean Anderson
• [PATCH v4 3/8] riscv: Rework Andes PLMT as a UCLASS_TIMER driver   Sean Anderson
• [PATCH v4 4/8] riscv: Clean up initialization in Andes PLIC   Sean Anderson
• [PATCH v4 5/8] riscv: Rework Sifive CLINT as UCLASS_TIMER driver   Sean Anderson
• [PATCH v4 6/8] riscv: clk: Add CLINT clock to kendryte clock driver   Sean Anderson
• [PATCH v4 7/8] riscv: Update Kendryte device tree for new CLINT driver   Sean Anderson
• [PATCH v4 8/8] riscv: Update SiFive device tree for new CLINT driver   Sean Anderson
• [PATCH v2] time: Fix get_ticks being non-monotonic   Sean Anderson
• [PATCH v4 1/3] binman: Allow selecting default FIT configuration   Alper Nebi Yasak
• [PATCH v4 2/3] binman: Support help messages for missing blobs   Alper Nebi Yasak
• [PATCH v3 0/7] wdt: Add support for watchdogs on Kendryte K210   Sean Anderson
• [PATCH] clk: Add more information to debug messages   Sean Anderson
• [PATCH] clk: Unconditionally recursively en-/dis-able clocks   Sean Anderson
• [PATCH v3 5/7] wdt: dw: Free the clock on error   Sean Anderson
• [PATCH v4 0/7] wdt: Add support for watchdogs on Kendryte K210   Sean Anderson
• [PATCH v4 1/7] wdt: dw: Switch to using fls for log2   Sean Anderson
• [PATCH v4 2/7] wdt: dw: Switch to if(CONFIG()) instead of using #if   Sean Anderson
• [PATCH v4 3/7] wdt: dw: Fix clock rate being off by 1000   Sean Anderson
• [PATCH v4 4/7] wdt: dw: Enable the clock before using it   Sean Anderson
• [PATCH v4 5/7] wdt: dw: Free the clock on error   Sean Anderson
• [PATCH v4 6/7] riscv: Add watchdog bindings for the k210   Sean Anderson
• [PATCH v4 7/7] riscv: Enable watchdog for the k210   Sean Anderson
• [PATCH] mmc: stm32_sdmmc2: Use mmc_of_parse() to read host capabilities   Alexandru Gagniuc
• [PATCH 1/1] lib: rsa: fix data abort in br_i32_decode()   AKASHI Takahiro
• [PATCH v6 01/17] dfu: rename dfu_tftp_write() to dfu_write_by_name()   AKASHI Takahiro
• [PATCH v6 01/17] dfu: rename dfu_tftp_write() to dfu_write_by_name()   Tom Rini
• [PATCH v6 00/17] efi_loader: add capsule update support   AKASHI Takahiro
• [PATCH v6 00/17] efi_loader: add capsule update support   AKASHI Takahiro
• [PATCH v6 00/17] efi_loader: add capsule update support   Tom Rini
• [PATCH 5/7] riscv: Add fence to available_harts_lock   Rick Chen
• [PATCH] ARM: mvebu: clearfog: don't override set fdtfile env   Andre Heider
• [PATCH v5] cmd: mem: fix range of bitflip test   Stefan Roese
• [PATCH] arm: gic-v3-its: Add irq UCLASS_DRIVER   Stefan Roese
• [v4, 00/11] mmc: fsl_esdhc: support eMMC HS200/HS400 modes   Jaehoon Chung
• [PATCH] arm: gic-v3-its: Add irq UCLASS_DRIVER   Rayagonda Kokatanur
• [PATCH 1/7] Revert "riscv: Clear pending interrupts before enabling IPIs"   Rick Chen
• [PATCH] acpi: device: Fix check for sequence number   Wolfgang Wallner
• [RESEND PATCH v5] Add board support for ic-automation Moritz III   Tan, Ley Foon
• [PATCH 0/7] riscv: Correctly handle IPIs already pending upon boot   Rick Chen
• [PATCH] armv8: lx2160a: fix reset sequence   Priyanka Jain
• [PATCH v1 04/16] arm: socfpga: soc64: Load FIT image with ATF support   Tan, Ley Foon
• [GIT PULL] rpi: second round for v2020.10   Matthias Brugger
• [PATCH] arm: gic-v3-its: Add irq UCLASS_DRIVER   Stefan Roese
• [PATCH] mmc: stm32_sdmmc2: Use mmc_of_parse() to read host capabilities   Patrice CHOTARD
• [PATCH v1 01/16] arm: socfpga: soc64: Remove CONFIG_OF_EMBED   Tan, Ley Foon
• [PATCH 3/7] riscv: Use NULL as a sentinel value for smp_call_function   Rick Chen
• [PATCH] arm: gic-v3-its: Add irq UCLASS_DRIVER   Rayagonda Kokatanur
• [PATCH 0/8] ARM: mach-meson: update & rework USB for GXL, GXM & AXG   Neil Armstrong
• [PATCH 1/8] ARM: dts: sync amlogic AXG/GXL/GXM DT from Linux 5.8-rc1   Neil Armstrong
• [PATCH 2/8] usb: dwc3: add Amlogic GXL & GXL DWC3 Glue   Neil Armstrong
• [PATCH 3/8] ARM: mach-meson: use new DWC3 glue for GXL & GXM   Neil Armstrong
• [PATCH 4/8] phy: meson-gxl: remove invalid USB3 PHY driver   Neil Armstrong
• [PATCH 5/8] phy: meson-gxl-usb: depend on Meson AXG aswell   Neil Armstrong
• [PATCH 6/8] arm: meson-axg: add board_usb_init()/cleanup() for USB gadget   Neil Armstrong
• [PATCH 7/8] ARM: dts: meson-axg: add USB nodes for S400   Neil Armstrong
• [PATCH 8/8] configs: s400: enable USB   Neil Armstrong
• [PATCH v4 1/3] fdtdec: optionally add property no-map to created reserved memory node   Patrice Chotard
• [PATCH v4 2/3] test: fdtdec: Add test for new no-map fdtdec_add_reserved_memory() parameter   Patrice Chotard
• [PATCH v4 3/3] optee: add property no-map to secure reserved memory   Patrice Chotard
• [PATCH] board: s400: generate unique mac address from SoC serial   Neil Armstrong
• command documentation   Jasper van Santen
• [PATCH] armv8: dts: fsl-lx2160a: add gpio0 gpio1 gpio3 DT nodes   Hui Song
• [PATCH v4 0/4] Support for specifying extra IOMMU mappings for PCI   laurentiu.tudor at nxp.com
• [PATCH v5 1/4] pci: layerscape: move per-pci device fdt fixup in a function   laurentiu.tudor at nxp.com
• [PATCH v5 2/4] pci: layerscape: move pci node search in a common function   laurentiu.tudor at nxp.com
• [PATCH v5 3/4] pci: add a few ARI related defines   laurentiu.tudor at nxp.com
• [PATCH v5 4/4] pci: layerscape: add a way of specifying additional iommu mappings   laurentiu.tudor at nxp.com
• [PATCH v1 02/16] arm: socfpga: soc64: Add FIT generator script for pack itb with ATF   Tan, Ley Foon
• [PATCH] drivers: net: ldpaa_eth: lx2160a: fix bug in checking if a DPMAC is enabled   Ioana Ciornei
• [PATCH 1/1] test: do no assume hush parser in validate_empty()   Heinrich Schuchardt
• [PATCH 1/7] Revert "riscv: Clear pending interrupts before enabling IPIs"   Sean Anderson
• [PATCH] drivers: net: phy: Use Aquantia driver for AQR113C   Madalin Bucur
• [PATCH] fpga: zynqmp: Get rid of ZYNQMP_SIP_SVC* macros   Michal Simek
• [PATCH 0/7] riscv: Correctly handle IPIs already pending upon boot   Sean Anderson
• [PATCH] fpga: kconfig: Rename SPL_FPGA_SUPPORT to SPL_FPGA   Michal Simek
• [PATCH 0/3] efi_loader: save global data pointer on RISC-V   Heinrich Schuchardt
• [PATCH 1/3] riscv: define function set_gd()   Heinrich Schuchardt
• [PATCH 2/3] efi_loader: save global data pointer on RISC-V   Heinrich Schuchardt
• [PATCH 3/3] efi_selftest: restore gd before do_reset()   Heinrich Schuchardt
• [PATCH] fpga: zynqmp: Protect zynqmp_loads() for SPL   Michal Simek
• [PATCH 0/3] efi_loader: save global data pointer on RISC-V   Sean Anderson
• [PATCH 1/3] riscv: define function set_gd()   Sean Anderson
• [PATCH 0/3] efi_loader: save global data pointer on RISC-V   Heinrich Schuchardt
• [PATCH v2 0/8] IPQ40xx: Improve support   Robert Marko
• [PATCH v2 1/8] dt-bindings: clock: import Qualcomm IPQ4019 bindings   Robert Marko
• [PATCH v2 2/8] IPQ40xx: clk: Use dt-bindings instead of hardcoding   Robert Marko
• [PATCH v2 3/8] IPQ40xx: Add SMEM support   Robert Marko
• [PATCH v2 4/8] reset: Add IPQ40xx reset controller driver   Robert Marko
• [PATCH v2 5/8] IPQ40xx: Add reset controller support   Robert Marko
• [PATCH v2 6/8] phy: add driver for Qualcomm IPQ40xx USB PHY   Robert Marko
• [PATCH v2 7/8] usb: dwc3: Add Qualcomm DWC3 compatible string   Robert Marko
• [PATCH v2 8/8] IPQ40xx: Add USB nodes   Robert Marko
• [PATCH v2 1/2] ls1012a, pfe_eth: correction in delay implementation   Chaitanya Sakinam
• [PATCH v2 2/2] ls1012a, pfe_eth: Update probe to avoid resource leak   Chaitanya Sakinam
• [PATCH v3 3/4] arm64: Add support for larger PIE U-Boot   Michal Simek
• [PATCH 1/3] riscv: define function set_gd()   Heinrich Schuchardt
• [PULL u-boot] Please pull u-boot-amlogic-20200910   Neil Armstrong
• command documentation   Ralph Siemsen
• [PATCH v3 4/4] arm64: Trap non-PIE builds early if starting from wrong address   Michal Simek
• [PATCH v3 4/4] arm64: Trap non-PIE builds early if starting from wrong address   André Przywara
• [PATCH v2 0/8] IPQ40xx: Improve support   Tom Rini
• [PATCH v2 7/9] usb: dwc3: Make PHY functions depend on CONFIG_USB_DWC3   Tom Rini
• [PATCH v2 8/9] usb: xhci: Add Qualcomm DWC3 xHCI driver   Tom Rini
• [PATCH v2 8/9] usb: xhci: Add Qualcomm DWC3 xHCI driver   Marek Vasut
• [PATCH 2/2] video: stm32_dsi: Convert to use APIs which support live DT   Simon Glass
• [PATCH] gpio: Convert to use APIs which support live DT   Simon Glass
• [PATCH] clk: Add more information to debug messages   Simon Glass
• [PATCH v2] time: Fix get_ticks being non-monotonic   Simon Glass
• [PATCH v4 2/8] timer: Add helper for drivers using timebase fallback   Simon Glass
• [PATCH v4 3/8] firmware: scmi: support Arm SMCCC transport   Simon Glass
• [PATCH v3 4/4] arm64: Trap non-PIE builds early if starting from wrong address   Michal Simek
• [PATCH v4 2/8] firmware: scmi: mailbox/smt agent device   Simon Glass
• [PATCH v4 4/8] dt-bindings: arm: SCMI bindings documentation   Simon Glass
• [PATCH v4 5/8] clk: add clock driver for SCMI agents   Simon Glass
• [PATCH v4 6/8] firmware: scmi: sandbox test for SCMI clocks   Simon Glass
• [PATCH v4 7/8] reset: add reset controller driver for SCMI agents   Simon Glass
• [PATCH v4 8/8] firmware: smci: sandbox test for SCMI reset controllers   Simon Glass
• [PATCH] ARM: zynq: Add Z-turn board V5   Michal Simek
• [PATCH v3 4/4] arm64: Trap non-PIE builds early if starting from wrong address   Tom Rini
• [PATCH v2 0/8] IPQ40xx: Improve support   Robert Marko
• [PATCH v2 8/9] usb: xhci: Add Qualcomm DWC3 xHCI driver   Robert Marko
• [PATCH v2 7/9] usb: dwc3: Make PHY functions depend on CONFIG_USB_DWC3   Robert Marko
• [PATCH v3 0/8] IPQ40xx: Improve support   Robert Marko
• [PATCH v3 1/8] dt-bindings: clock: import Qualcomm IPQ4019 bindings   Robert Marko
• [PATCH v3 2/8] IPQ40xx: clk: Use dt-bindings instead of hardcoding   Robert Marko
• [PATCH v3 3/8] IPQ40xx: Add SMEM support   Robert Marko
• [PATCH v3 4/8] reset: Add IPQ40xx reset controller driver   Robert Marko
• [PATCH v3 5/8] IPQ40xx: Add reset controller support   Robert Marko
• [PATCH v3 6/8] phy: add driver for Qualcomm IPQ40xx USB PHY   Robert Marko
• [PATCH v3 7/8] usb: dwc3: Add Qualcomm DWC3 compatible string   Robert Marko
• [PATCH v3 8/8] IPQ40xx: Add USB nodes   Robert Marko
• chromebook_coral.dts: multiple FSP-S entries for same parameters   Wolfgang Wallner
• [PATCH 1/2] video: stm32_ltdc: Convert to use APIs which support live DT   Yannick FERTRE
• [PATCH 2/2] video: stm32_dsi: Convert to use APIs which support live DT   Yannick FERTRE
• [PATCH v3 4/4] arm64: Trap non-PIE builds early if starting from wrong address   Michal Simek
• [PATCH 1/1] test: do no assume hush parser in validate_empty()   Stephen Warren
• [PATCH v4 2/8] timer: Add helper for drivers using timebase fallback   Sean Anderson
• [PATCH] mmc: stm32_sdmmc2: Use mmc_of_parse() to read host capabilities   Patrick DELAUNAY
• Improvements to FIT ciphering   Philippe REYNES
• [PATCH 1/2] power: regulator: gpio-regulator: protect count value   Patrick Delaunay
• [PATCH 2/2] power: regulator: gpio-regulator: Convert to use APIs which support live DT   Patrick Delaunay
• [PATCH] i2c: i2c-gpio: Convert to use APIs which support live DT   Patrick Delaunay
• [PATCH] dm: add cells_count parameter in live DT APIs of_parse_phandle_with_args   Patrick Delaunay
• [RFC PATCH] dm: add cells_count parameter in *_count_phandle_with_args   Patrick Delaunay
• [PATCH] mmc: xenon_sdhci: Add missing common host capabilities   Andre Heider
• [PATCH 3/5] spi: spi-uclass: Block dm_scan_fdt_dev with OF_CONTROL to prevent build failures   Jagan Teki
• [PATCH v2 3/3] arm64: dts: a3720: add support for espressobin with populated emmc   Andre Heider
• [EXT] [PATCH] mmc: xenon_sdhci: Add missing common host capabilities   Kostya Porotchkin
• [PATCH v2 19/30] pwm: ti: am33xx: add subsystem driver   Dario Binacchi
• [PULL u-boot] Please pull u-boot-amlogic-20200910   Tom Rini
• [PATCH v2 1/5] cmd: broadcom: add bnxt boot command   Tom Rini
• [PATCH v2 1/5] cmd: broadcom: add bnxt boot command   Tom Rini
• [PATCH v2 2/5] cmd: broadcom: add cmd to update bnxt image env variables   Tom Rini
• [PATCH v2 3/5] cmd: broadcom: add command for chimp handshake   Tom Rini
• [PATCH v2 4/5] board: ns3: kconfig: extend board kconfig with specific commands   Tom Rini
• [PATCH v2 5/5] MAINTAINERS: update maintainers file for new files   Tom Rini
• [PATCH v2 1/1] board: ns3: check bnxt chimp handshake status   Tom Rini
• [PATCH v2 1/3] cosmetic: aspeed: ast2500: Rename clock header   Tom Rini
• [PATCH v2 2/3] clock:aspeed: Sync with Linux kernel clock header define   Tom Rini
• [PATCH v2 3/3] cosmetic: aspeed: Modify for SPDX-License   Tom Rini
• [PATCH] PCI: mediatek: Release the resource when PCIe enable port fail   Tom Rini
• [PATCH v2] arm: dts: fix ast2500-evb inclusion for the correct soc family   Tom Rini
• [PATCH] PCI: mediatek: Release the resource when PCIe enable port fail   Frank Wunderlich
• [PATCH] mmc: xenon_sdhci: Add missing common host capabilities   Pali Rohár
• [PATCH] PCI: mediatek: Release the resource when PCIe enable port fail   Tom Rini
• [PATCH] PCI: mediatek: Release the resource when PCIe enable port fail   Frank Wunderlich
• [PATCH] mmc: stm32_sdmmc2: Use mmc_of_parse() to read host capabilities   Alex G.
• RPi4 U-Boot freeze   Stefan Agner
• Improvements to FIT ciphering   Patrick Oppenlander
• [PATCH v2 1/3] net: cortina_ni: Add eth support for Cortina Access CAxxxx SoCs   Alex Nemirovsky
• [PATCH v10 1/2] spi: ca_sflash: Add CAxxxx SPI Flash Controller   Alex Nemirovsky
• [PATCH v2 1/3] net: cortina_ni: Add eth support for Cortina Access CAxxxx SoCs   Tom Rini
• [PATCH v2 1/3] net: cortina_ni: Add eth support for Cortina Access CAxxxx SoCs   Alex Nemirovsky
• [PATCH v6 01/17] dfu: rename dfu_tftp_write() to dfu_write_by_name()   AKASHI Takahiro
• [PATCH v6 00/17] efi_loader: add capsule update support   AKASHI Takahiro
• [PATCH v6 00/17] efi_loader: add capsule update support   Tom Rini
• [PATCH v1 03/16] arm: socfpga: Add function for checking description from FIT image   Tan, Ley Foon
• [PATCH v1 11/16] arm: socfpga: soc64: Add ATF support for Reset Manager driver   Tan, Ley Foon
• [PATCH 00/16] Kconfig: Tidy up the top-level kconfig menu   Simon Glass
• [PATCH 01/16] Kconfig: Add a 'Boot options' menu   Simon Glass
• [PATCH 02/16] Kconfig: Move boot menu into common/   Simon Glass
• [PATCH 03/16] Kconfig: Move boot timing under boot options   Simon Glass
• [PATCH 04/16] Kconfig: Move boot media under boot options   Simon Glass
• [PATCH 05/16] Kconfig: Move autoboot options under boot options   Simon Glass
• [PATCH 06/16] Kconfig: Move CONFIG_BOOTDELAY under autoboot options   Simon Glass
• [PATCH 07/16] Kconfig: Move misc boot options under 'boot options'   Simon Glass
• [PATCH 08/16] Kconfig: Move SUPPORT_RAW_INITRD under boot options   Simon Glass
• [PATCH 09/16] Kconfig: Move DEFAULT_FDT_FILE under boot options   Simon Glass
• [PATCH 10/16] Kconfig: Create a new 'init options' menu   Simon Glass
• [PATCH 11/16] Kconfig: Move startup hooks under init options   Simon Glass
• [PATCH 12/16] Kconfig: MISC_INIT_R and BOARD_LATE_INIT -> start-up hooks   Simon Glass
• [PATCH 13/16] Kconfig: Move VERSION_VARIABLE under environment   Simon Glass
• [PATCH 14/16] Kconfig: Move BOUNCE_BUFFER under driver options   Simon Glass
• [PATCH 15/16] Kconfig: Move BOARD_TYPES under init options   Simon Glass
• [PATCH 16/16] Kconfig: Create a new tools menu   Simon Glass
• [PATCH v6 00/17] efi_loader: add capsule update support   AKASHI Takahiro
• [PATCH v2 19/30] pwm: ti: am33xx: add subsystem driver   Lokesh Vutla
• [PATCH v6 01/17] dfu: rename dfu_tftp_write() to dfu_write_by_name()   Tom Rini
• [PATCH v6 00/17] efi_loader: add capsule update support   Tom Rini
• [PATCH 0/5] Add spi boot support to am335x-icev2   Lokesh Vutla
• [PATCH] armv8: dts: fsl-lx2160a: add gpio0 gpio1 gpio3 DT nodes   Heiko Schocher
• [PATCH] gpio: Convert to use APIs which support live DT   Heiko Schocher
• [PATCH] i2c: i2c-gpio: Convert to use APIs which support live DT   Heiko Schocher
• [PATCH v2] arm: mvebu: Espressobin: Set environment variable fdtfile   Andre Heider
• [PATCH 0/5] Add spi boot support to am335x-icev2   Faiz Abbas
• [PATCH] mmc: xenon_sdhci: Add missing common host capabilities   Stefan Roese
• [PATCH 1/3] riscv: Add timer_get_us() for tracing   Bin Meng
• [RESEND PATCH v5 9/11] ARM: socfpga: Add initial support for ic-automation Moritz III   Nico Becker
• [PATCH 1/1] riscv: add DT binding for BOOT button on Maix board   Bin Meng
• [RESEND PATCH v5 9/11] ARM: socfpga: Add initial support for ic-automation Moritz III   Marek Vasut
• [PATCH] driver: net: fm: add support for XFI   Madalin Bucur
• [PATCH] riscv: Only enable OF_BOARD_FIXUP for S-Mode   Bin Meng
• [PATCH 1/7] Revert "riscv: Clear pending interrupts before enabling IPIs"   Bin Meng
• [PATCH 2/7] riscv: Match memory barriers between send_ipi_many and handle_ipi   Bin Meng
• [PATCH] mmc: stm32_sdmmc2: Use mmc_of_parse() to read host capabilities   Jaehoon Chung
• [PATCH 3/7] riscv: Use NULL as a sentinel value for smp_call_function   Bin Meng
• [PATCH v2 0/3] xilinx: zynqmp: Silicon name cleanup   Michal Simek
• [PATCH v2 1/3] xilinx: zynqmp: refactor silicon name function   Michal Simek
• [PATCH v2 2/3] xilinx: zynqmp: Add missing 43/46/47dr ID codes   Michal Simek
• [PATCH v2 3/3] xilinx: zynqmp: Remove one static variable   Michal Simek
• [PATCH v5 0/2] gpio: Add a managed API   Pratyush Yadav
• [PATCH v5 1/2] drivers: gpio: Add a managed API to get a GPIO from the device-tree   Pratyush Yadav
• [PATCH v5 2/2] test: gpio: Add tests for the managed API   Pratyush Yadav
• [PATCH 1/1] riscv: add DT binding for BOOT button on Maix board   Heinrich Schuchardt
• [PATCH v3 4/4] arm64: Trap non-PIE builds early if starting from wrong address   Edgar E. Iglesias
• [RESEND PATCH v5 9/11] ARM: socfpga: Add initial support for ic-automation Moritz III   Tan, Ley Foon
• [PATCH] mmc: xenon_sdhci: Add missing common host capabilities   Andre Heider
• [PATCH v1 03/16] arm: socfpga: Add function for checking description from FIT image   Tan, Ley Foon
• [PATCH] drivers: net: ldpaa_eth: lx2160a: fix bug in checking if a DPMAC is enabled   Priyanka Jain
• [PATCH] mmc: stm32_sdmmc2: Use mmc_of_parse() to read host capabilities   Patrick DELAUNAY
• [PATCH v1 07/16] arm: socfpga: soc64: Add SMC helper function for Intel SOCFPGA (64bits)   Tan, Ley Foon
• [PATCH v1 06/16] arm: socfpga: Disable "spin-table" method for booting Linux   Tan, Ley Foon
• [PATCH v1 05/16] arm: socfpga: soc64: Override 'lowlevel_init' to support ATF   Tan, Ley Foon
• [PATCH v1 12/16] arm: socfpga: soc64: Add ATF support for FPGA reconfig driver   Tan, Ley Foon
• [PATCH] riscv: Only enable OF_BOARD_FIXUP for S-Mode   Sean Anderson
• [PATCH] fs/squashfs: Fix Coverity Scan defects   Joao Marcos Costa
• [PATCH 1/7] Revert "riscv: Clear pending interrupts before enabling IPIs"   Sean Anderson
• configs: lx2162aqds: enable CONFIG_BOARD_EARLY_INIT_R   Yangbo Lu
• configs: lx2162aqds: enable eMMC HS400 mode support   Yangbo Lu
• arm: dts: lx2162aqds: support eMMC HS400 mode   Yangbo Lu
• [PATCH 5/7] riscv: Add fence to available_harts_lock   Sean Anderson
• [PATCH 1/2] net: pfe_eth: Fix resoure leak in pfe_spi_flash_init   Kuldeep Singh
• [PATCH 2/2] net: pfe_eth: Remove non-DM code check from pfe_spi_flash_init   Kuldeep Singh
• [PATCH] mmc: stm32_sdmmc2: Use mmc_of_parse() to read host capabilities   Patrick DELAUNAY
• [PATCH] defconfig: espressobin: enable NET_RANDOM_ETHADDR   Marek Behún
• [PATCH] mmc: xenon_sdhci: Add missing common host capabilities   Marek Behún
• SPL FIT configuration signature verification   Andrii Voloshyn
• [PATCH] mmc: xenon_sdhci: Add missing common host capabilities   Stefan Roese
• [PATCH] mmc: xenon_sdhci: Add missing common host capabilities   Marek Behún
• [PATCH] mmc: xenon_sdhci: Add missing common host capabilities   Marek Behún
• [PATCH] mmc: xenon_sdhci: Add missing common host capabilities   Gérald Kerma
• [PATCH v2] arm: mvebu: Espressobin: Set environment variable fdtfile   Gérald Kerma
• [PATCH] riscv: Only enable OF_BOARD_FIXUP for S-Mode   Bin Meng
• [PATCH 1/7] Revert "riscv: Clear pending interrupts before enabling IPIs"   Bin Meng
• [PATCH 5/7] riscv: Add fence to available_harts_lock   Bin Meng
• [PATCH] x86: fsp: Replace e-mmc with emmc in devicetree bindings   Wolfgang Wallner
• [PATCH] dm: arm: bcmstb: Enable driver model for Ethernet drivers   Thomas Fitzsimmons
• [PATCH] defconfig: espressobin: enable NET_RANDOM_ETHADDR   Andre Heider
• [PATCH] mmc: xenon_sdhci: Add missing common host capabilities   Andre Heider
• [PATCH 00/16] Kconfig: Tidy up the top-level kconfig menu   Tom Rini
• [PATCH v3 1/2] net: add a generic udp protocol   Philippe Reynes
• [PATCH v3 2/2] sandbox: enable support of generic udp protocol   Philippe Reynes
• [PATCH] defconfig: espressobin: enable NET_RANDOM_ETHADDR   Marek Behún
• [PATCH] defconfig: espressobin: enable NET_RANDOM_ETHADDR   Andre Heider
• [PATCH v2] ARM: Distro boot: document the need for fdtfile variable to be set   dgilmore at redhat.com
• [PATCH] defconfig: espressobin: enable NET_RANDOM_ETHADDR   Tom Rini
• [PATCH] defconfig: espressobin: enable NET_RANDOM_ETHADDR   Dennis Gilmore
• U-Boot FIT Signature Verification   Andrii Voloshyn
• Ways to copy FIT image from the flash to RAM   Andrii Voloshyn
• [PATCH] dm: arm: bcmstb: Enable driver model for Ethernet drivers   Tom Rini
• [PATCH] riscv: Only enable OF_BOARD_FIXUP for S-Mode   Sean Anderson
• [PATCH 1/7] Revert "riscv: Clear pending interrupts before enabling IPIs"   Sean Anderson
• [PATCH v2] configs: bcmstb: Disable networking support   Thomas Fitzsimmons
• [PATCH] RFC: tegra: xhci: Allocate from non-cached memory   twarren at nvidia.com
• [PATCH v2] configs: bcmstb: Disable networking support   Tom Rini
• [PATCH] x86: fsp: Replace e-mmc with emmc in devicetree bindings   Simon Glass
• [PATCH 00/16] Kconfig: Tidy up the top-level kconfig menu   Simon Glass
• [PATCH 00/16] Kconfig: Tidy up the top-level kconfig menu   Tom Rini
• [PATCH] RFC: tegra: xhci: Allocate from non-cached memory   Bin Meng
• [PATCH] lib: fdt: Fix fdtdec_setup_mem..() conversion to livetree API   Marek Vasut
• [PATCH] Add support for Davicom DM96xx based USB 10/100 ethernet devices   hyyoxhk
• [PATCH 1/1] cmd/button: return button status   Tom Rini
• [PATCH] RFC: tegra: xhci: Allocate from non-cached memory   Marek Vasut
• [PATCH] Add support for Davicom DM96xx based USB 10/100 ethernet devices   hyyoxhk
• [PATCH] lib: fdt: Fix fdtdec_setup_mem..() conversion to livetree API   Biju Das
• Intermittent failure with test_efi_selftest_text_input   Simon Glass
• [PATCH v2 1/2] log: Allow LOG_DEBUG to always enable log output   Simon Glass
• [PATCH v2 2/2] lib: Allow hexdump to be used in SPL   Simon Glass
• [PATCH 0/4] log: Fix the syslog spam when running tests   Simon Glass
• [PATCH 1/4] log: Add a flag to enable log drivers   Simon Glass
• [PATCH 2/4] log: Drop #ifdef in log_test   Simon Glass
• [PATCH 3/4] log: Add a way to enable/disable a log device   Simon Glass
• [PATCH 4/4] log: Disable the syslog driver by default   Simon Glass
• Intermittent failure with test_efi_selftest_text_input   Heinrich Schuchardt
• Intermittent failure with test_efi_selftest_text_input   Simon Glass
• [PATCH 4/4] log: Disable the syslog driver by default   Heinrich Schuchardt
• [PATCH 4/4] log: Disable the syslog driver by default   Simon Glass
• [PATCH 3/4] log: Add a way to enable/disable a log device   Heinrich Schuchardt
• [PATCH 4/4] log: Disable the syslog driver by default   Heinrich Schuchardt
• [PATCH v4 0/3] binman: Further updates for FIT support   Samuel Holland
• [PATCH v4 0/9] sunxi: binman fixes and SCP firmware support   Samuel Holland
• [PATCH v4 1/9] Makefile: Only define u-boot.itb rule when applicable   Samuel Holland
• [PATCH v4 2/9] binman: Only write FDT once per node   Samuel Holland
• [PATCH v4 3/9] spl: fit: Minimally parse OS properties with FIT_IMAGE_TINY   Samuel Holland
• [PATCH v4 4/9] sunxi: binman: Fix spacing between nodes   Samuel Holland
• [PATCH v4 5/9] sunxi: binman: Provide a default BL31 filename   Samuel Holland
• [PATCH v4 6/9] sunxi: binman: Use a macro for the BL31 load address   Samuel Holland
• [PATCH v4 7/9] sunxi: binman: Update FIT component descriptions   Samuel Holland
• [PATCH v4 8/9] binman: Add support for SCP firmware   Samuel Holland
• [PATCH v4 9/9] sunxi: binman: Add support for including SCP firmware   Samuel Holland
• [PATCH 0/3] log: Fix segfault in sandbox when LOG_LEVEL_DEFAULT >= LOGL_DEBUG   Sean Anderson
• [PATCH 1/3] dev: Disambiguate errors in uclass_find   Sean Anderson
• [PATCH 2/3] net: Expose some errors generated in net_init   Sean Anderson
• [PATCH 3/3] log: syslog: Handle errors in net_init   Sean Anderson
• [PATCH] ARM: mx6: ddr: Add support for iMX6UL/ULL/SL/SDL   Marek Vasut
• [PATCH 0/4] dm: Print device name in dev_xxx() like Linux   Sean Anderson
• [PATCH 1/4] remoteproc: Remove unused function rproc_elf_sanity_check   Sean Anderson
• [PATCH 2/4] net: mdio: Supply appropriate devices for dev_dgb calls   Sean Anderson
• [PATCH 3/4] dm: Use symbolic constants for log levels in dev_xxx()   Sean Anderson
• [PATCH 4/4] dm: Print device name in dev_xxx() like Linux   Sean Anderson
• [PATCH 3/4] log: Add a way to enable/disable a log device   Simon Glass
• [PATCH 4/4] log: Disable the syslog driver by default   Simon Glass
• [PATCH 0/4] dm: Print device name in dev_xxx() like Linux   Sean Anderson
• [PATCH 1/3] net: tftp: Fix tftp_prev_block counter update   Ramon Fried
• [PATCH 2/3] net: tftp: Fix store_block offset calculation   Ramon Fried
• [PATCH 4/4] log: Disable the syslog driver by default   Heinrich Schuchardt
• [PATCH 3/3] net: tftp: Fix load_block offset calculation   Ramon Fried
• [EXT] Re: [PATCH] defconfig: espressobin: enable NET_RANDOM_ETHADDR   Kostya Porotchkin
• [PATCH 4/4] log: Disable the syslog driver by default   Simon Glass
• [PATCH] pci: layerscape: Fixup PCIe EP mode DT nodes for LX2160A rev2   Zhiqiang Hou
• [PATCH 0/3] log: Fix segfault in sandbox when LOG_LEVEL_DEFAULT >= LOGL_DEBUG   Sean Anderson
• SPL FIT configuration signature verification   Reuben Dowle
• [PATCH] Add support for Davicom DM96xx based USB 10/100 ethernet devices   Tom Rini
• [PATCH 3/7] riscv: Use NULL as a sentinel value for smp_call_function   Leo Liang
• [PATCH 3/7] riscv: Use NULL as a sentinel value for smp_call_function   Bin Meng
• [PATCH 4/7] riscv: Clear pending IPIs on initialization   Bin Meng
• [PATCH 0/4][v2] xhci fixes for rpi4   Jason Wessel
• [PATCH v2 1/4] xhci.c: Add retry in xhci_address_device()   Jason Wessel
• [PATCH v2 2/4] xhci.c: Add polling support for USB keyboards   Jason Wessel
• [PATCH v2 3/4] xhci-ring.c: Add poll pending state to properly abort transactions   Jason Wessel
• [PATCH v2 4/4] xhci-ring.c: Fix crash when issuing "usb reset"   Jason Wessel
• [PATCH 1/7] Revert "riscv: Clear pending interrupts before enabling IPIs"   Rick Chen
• [PATCH 3/7] riscv: Use NULL as a sentinel value for smp_call_function   Rick Chen
• [PATCH 6/7] riscv: Ensure gp is NULL or points to valid data   Bin Meng
• [PATCH 7/7] riscv: Add some comments to start.S   Bin Meng
• [PATCH 3/7] riscv: Use NULL as a sentinel value for smp_call_function   Leo Liang
• [PATCH 3/7] riscv: Use NULL as a sentinel value for smp_call_function   Bin Meng
• [PATCH] riscv: Only enable OF_BOARD_FIXUP for S-Mode   Bin Meng
• [PATCH v2 0/5] Add spi boot support to am335x-icev2   Faiz Abbas
• [PATCH v2 1/5] arm: dts: am335x-icev2: Add spi node   Faiz Abbas
• [PATCH v2 2/5] spi: spi-uclass: Block dm_scan_fdt_dev with OF_CONTROL to prevent build failures   Faiz Abbas
• [PATCH v2 3/5] arm: mach-omap2: am33xx: Add device structure for spi   Faiz Abbas
• [PATCH v2 4/5] spi: omap3_spi: Read platform data in ofdata_to_platdata()   Faiz Abbas
• [PATCH v2 5/5] configs: Add spiboot support for am335x   Faiz Abbas
• SPL FIT configuration signature verification   Andrii Voloshyn
• [PATCH v4 0/3] binman: Further updates for FIT support   Michal Simek
• [PATCH v1 0/9] toradex: Misc fixes for v2020.10   Igor Opaniuk
• [PATCH v1 1/9] colibri-imx6ull: use splashcreen value instead of legacy function   Igor Opaniuk
• [PATCH v1 2/9] colibri_imx7: use splashcreen value instead of legacy function   Igor Opaniuk
• [PATCH v1 3/9] toradex: drop legacy show_boot_logo function and use splashscreen   Igor Opaniuk
• [PATCH v1 4/9] colibri_imx7: wrap video specific funcs with ifdefs   Igor Opaniuk
• [PATCH v1 5/9] colibri-imx6ull: use preboot for fdtfile evaluation   Igor Opaniuk
• [PATCH v1 6/9] colibri_vf: use preboot for fdtfile evaluation   Igor Opaniuk
• [PATCH v1 7/9] colibri_imx7: use preboot for fdtfile evaluation   Igor Opaniuk
• [PATCH v1 8/9] colibri_imx6: provide fdtfile in env instead of setting it in runtime   Igor Opaniuk
• [PATCH v1 9/9] apalis_imx6: provide fdtfile in env instead of setting it in runtime   Igor Opaniuk
• [PATCH 1/1] log: mute messages generated by log drivers   Heinrich Schuchardt
• [RESEND PATCH v1 0/9] toradex: Misc fixes for v2020.10   Igor Opaniuk
• [RESEND PATCH v1 1/9] colibri-imx6ull: use splashcreen value instead of legacy function   Igor Opaniuk
• [RESEND PATCH v1 2/9] colibri_imx7: use splashcreen value instead of legacy function   Igor Opaniuk
• [RESEND PATCH v1 3/9] toradex: drop legacy show_boot_logo function and use splashscreen   Igor Opaniuk
• [RESEND PATCH v1 4/9] colibri_imx7: wrap video specific funcs with ifdefs   Igor Opaniuk
• [RESEND PATCH v1 5/9] colibri-imx6ull: use preboot for fdtfile evaluation   Igor Opaniuk
• [RESEND PATCH v1 6/9] colibri_vf: use preboot for fdtfile evaluation   Igor Opaniuk
• [RESEND PATCH v1 7/9] colibri_imx7: use preboot for fdtfile evaluation   Igor Opaniuk
• [RESEND PATCH v1 8/9] colibri_imx6: provide fdtfile in env instead of setting it in runtime   Igor Opaniuk
• [RESEND PATCH v1 9/9] apalis_imx6: provide fdtfile in env instead of setting it in runtime   Igor Opaniuk
• [PATCH] x86: Drop duplicate declaration of emulator state   Wolfgang Wallner
• [PATCH 1/1] doc: remove redundant doc/README.log   Heinrich Schuchardt
• RPi4 U-Boot freeze   Matthias Brugger
• [PATCH 0/4] log: Fix the syslog spam when running tests   Heinrich Schuchardt
• [PATCH 1/1] net: use log_err() for 'No ethernet found' message   Heinrich Schuchardt
• [PATCH] serial: uartlite: Add support to work with any endianness   Michal Simek
• [PATCH v2] serial: uartlite: Add support to work with any endianness   Michal Simek
• [PATCH 0/2] net: xilinx: axi_emac: Add 64bit support   Michal Simek
• [PATCH 1/2] net: xilinx: axi_emac: Fix dma descriptors for 64bit and compilation warnings   Michal Simek
• [PATCH 2/2] net: xilinx: axi_emac: Typecast flush_cache arguments   Michal Simek
• [PATCH] xilinx: versal: Enable AXI ethernet driver   Michal Simek
• [PATCH v6 00/10] Add support MediaTek USB3 DRD driver   Chunfeng Yun
• [PATCH v6 01/10] dt-binding: usb: add bindings for some common properties   Chunfeng Yun
• [PATCH v6 02/10] dt-bindings: usb: mtu3: add bindings for MediaTek USB3 DRD   Chunfeng Yun
• [PATCH v6 03/10] usb: add USB_SPEED_SUPER_PLUS   Chunfeng Yun
• [PATCH v6 04/10] usb: common: add define of usb_speed_string()   Chunfeng Yun
• [PATCH v6 05/10] usb: add MediaTek USB3 DRD driver   Chunfeng Yun
• [PATCH v6 06/10] usb: gadget: Add bcdDevice for the MTU3 USB Gadget Controller   Chunfeng Yun
• [PATCH v6 07/10] arm: dts: mt8512: add usb related nodes   Chunfeng Yun
• [PATCH v6 08/10] configs: mt8512: enable fastboot   Chunfeng Yun
• [PATCH v6 09/10] configs: mt8512: add USB host related configs   Chunfeng Yun
• [PATCH v6 10/10] MAINTAINERS: add USB driver to ARM MEDIATEK   Chunfeng Yun
• [PATCH v3 0/4] arm64: Large PIE fixes   Michal Simek
• [PATCH] mx6qsabrelite: increase offset for environment on SPI   Denis Pynkin
• [PATCH] mx6qsabrelite: increase offset for environment on SPI   Stefano Babic
• [PATCH v2 0/3] cmd/button: return button status   Heinrich Schuchardt
• [PATCH v2 1/3] test: sharpen button label unit test   Heinrich Schuchardt
• [PATCH v2 2/3] drivers: gpio: keep output value for input on sandbox   Heinrich Schuchardt
• [PATCH v2 3/3] cmd/button: return button status   Heinrich Schuchardt
• [PATCH] pci: layerscape: Fix spurious writes and panic   Heiko Thiery
• [PATCH v7 1/2] board: kontron: add sl28 support   Heiko Thiery
• [PATCH] mmc: zynq: Fix incorrect indentation   Michal Simek
• [PATCH v7 2/2] board: sl28: add board specific nvm command   Heiko Thiery
• [PATCH] mx6qsabrelite: increase offset for environment on SPI   Fabio Estevam
• [PATCH] ARM: mx6: ddr: Add support for iMX6UL/ULL/SL/SDL   Fabio Estevam
• [PATCH] for [BUG] rsa: crash in br_i32_decode() called from rsa_gen_key_prop() (Heinrich Schuchardt)   Heinrich Schuchardt
• [PATCH] xilinx: Disable CONFIG_EFI_LOADER_BOUNCE_BUFFER for ZynqMP/Versal   Michal Simek
• [PATCH] serial: zynq: disable TX and RX while changing baud rate   Michal Simek
• [RFC] FPGA configuration as MTD using Device Tree   Michal Simek
• [PATCH] MAINTAINERS: add myself as reviewer for SquashFS   Thomas Petazzoni
• [PATCH] riscv: Only enable OF_BOARD_FIXUP for S-Mode   Sean Anderson
• [RFC PATCH 0/3] Start of MStar/SigmaStar Arm v7 SoC support   Daniel Palmer
• [RFC PATCH 1/3] arm: mstar: Initial MStar/SigmaStar Armv7 SoC support   Daniel Palmer
• [RFC PATCH 2/3] arm: mstar: Add option for loading the SPL from the IPL   Daniel Palmer
• [RFC PATCH 3/3] arm: mstar: Add boot0 header   Daniel Palmer
• [PATCH] mx6qsabrelite: increase offset for environment on SPI   Tom Rini
• [PATCH 1/7] Revert "riscv: Clear pending interrupts before enabling IPIs"   Sean Anderson
• [PATCH 6/7] riscv: Ensure gp is NULL or points to valid data   Sean Anderson
• [PATCH] mx6qsabrelite: increase offset for environment on SPI   Denis Pynkin
• [PATCH 6/7] riscv: Ensure gp is NULL or points to valid data   Sean Anderson
• [PATCH] mx6qsabrelite: increase offset for environment on SPI   Tom Rini
• [PATCH] mtd: spi-nor-ids: Add SECT_4K to mx25l12805d   Robert Marko
• [RFC] FPGA configuration as MTD using Device Tree   Rob Westfall
• [PATCH 3/7] riscv: Use NULL as a sentinel value for smp_call_function   Sean Anderson
• [PATCH 0/2] net: xilinx: axi_emac: Add 64bit support   Ramon Fried
• [PATCH 2/2] net: xilinx: axi_emac: Typecast flush_cache arguments   Ramon Fried
• [PATCH 1/2] net: xilinx: axi_emac: Fix dma descriptors for 64bit and compilation warnings   Ramon Fried
• [PATCH] mx6qsabrelite: increase offset for environment on SPI   Tom Rini
• [RFC] FPGA configuration as MTD using Device Tree   Ulf Samuelsson
• [PATCH v2 0/7] riscv: Correctly handle IPIs already pending upon boot   Sean Anderson
• [PATCH v2 1/7] Revert "riscv: Clear pending interrupts before enabling IPIs"   Sean Anderson
• [PATCH v2 2/7] riscv: Match memory barriers between send_ipi_many and handle_ipi   Sean Anderson
• [PATCH v2 3/7] riscv: Use a valid bit to ignore already-pending IPIs   Sean Anderson
• [PATCH v2 4/7] riscv: Clear pending IPIs on initialization   Sean Anderson
• [PATCH v2 5/7] riscv: Consolidate fences into AMOs for available_harts_lock   Sean Anderson
• [PATCH v2 6/7] riscv: Ensure gp is NULL or points to valid data   Sean Anderson
• [PATCH v2 7/7] riscv: Add some comments to start.S   Sean Anderson
• [PATCH] xilinx: r5: Fix MPU setting for R5   Michal Simek
• [PATCH] xilinx: r5: Disable EFI loader   Michal Simek
• armv7R: K3: am654: U-Boot   Michal Simek
• armv7R: K3: am654: U-Boot   Tom Rini
• armv7R: K3: am654: U-Boot   Michal Simek
• [PATCH v6 00/12] riscv: Add FPIOA and GPIO support for Kendryte K210   Sean Anderson
• [PATCH v6 01/12] pinctrl: Add pinmux property support to pinctrl-generic   Sean Anderson
• [PATCH v6 02/12] pinctrl: Reformat documentation in dm/pinctrl.h   Sean Anderson
• [PATCH v6 03/12] test: pinmux: Add test for pin muxing   Sean Anderson
• [PATCH v6 04/12] pinctrl: Add support for Kendryte K210 FPIOA   Sean Anderson
• [PATCH v6 05/12] gpio: dw: Fix warnings about casting int to pointer   Sean Anderson
• [PATCH v6 06/12] gpio: dw: Add a trailing underscore to generated name   Sean Anderson
• [PATCH v6 07/12] gpio: dw: Return output value when direction is out   Sean Anderson
• [PATCH v6 08/12] led: gpio: Default to using node name if label is absent   Sean Anderson
• [PATCH v6 09/12] test: dm: Test for default led naming   Sean Anderson
• [PATCH v6 10/12] riscv: Add pinmux and gpio bindings for Kendryte K210   Sean Anderson
• [PATCH v6 11/12] riscv: add DT binding for BOOT button on Maix board   Sean Anderson
• [PATCH v6 12/12] riscv: Add FPIOA and GPIO support for Kendryte K210   Sean Anderson
• armv7R: K3: am654: U-Boot   Tom Rini
• [PATCH v3 00/10] riscv: Add SPI support for Kendryte K210   Sean Anderson
• [PATCH v3 01/10] spi: dw: Convert calls to debug to log_*   Sean Anderson
• [PATCH v3 02/10] spi: dw: Rename "cs-gpio" to "cs-gpios"   Sean Anderson
• [PATCH v3 03/10] spi: dw: Use generic function to read reg address   Sean Anderson
• [PATCH v3 04/10] spi: dw: Rearrange struct dw_spi_priv   Sean Anderson
• [PATCH v3 05/10] spi: dw: Add SoC-specific compatible strings   Sean Anderson
• [PATCH v3 06/10] spi: dw: Configure ctrlr0 layout based on compatible string   Sean Anderson
• [PATCH v3 07/10] spi: dw: Document devicetree binding   Sean Anderson
• [PATCH v3 08/10] spi: dw: Add mem_ops   Sean Anderson
• [PATCH v3 09/10] riscv: Add device tree bindings for SPI   Sean Anderson
• [PATCH v3 10/10] riscv: Add support for SPI on Kendryte K210   Sean Anderson
• [PATCH v2 0/7] rockchip: Add Engicam PX30.Core support   Suniel Mahesh
• [PATCH v2 1/7] arm64: dts: rockchip: px30: Add Engicam EDIMM2.2 Starter Kit   Suniel Mahesh
• [PATCH v2 2/7] arm64: dts: rockchip: Add Engicam PX30.Core SOM   Suniel Mahesh
• [PATCH v2 3/7] rockchip: px30: Add EVB_PX30 Kconfig help   Suniel Mahesh
• [PATCH v2 4/7] rockchip: Add Engicam PX30.Core EDIMM2.2 Starter Kit   Suniel Mahesh
• [PATCH v2 5/7] arm64: dts: rockchip: px30: Add Engicam C.TOUCH 2.0   Suniel Mahesh
• [PATCH v2 6/7] rockchip: Add Engicam PX30.Core C.TOUCH 2.0   Suniel Mahesh
• [PATCH v2 7/7] doc: rockchip: Document Rockchip miniloader flashing   Suniel Mahesh
• [RFC] FPGA configuration as MTD using Device Tree   Ulf Samuelsson
• [PATCH] MAINTAINERS: add myself as reviewer for SquashFS   Miquel Raynal
• [PATCH] RFC: tegra: xhci: Allocate from non-cached memory   Stephen Warren
• [PATCH v2 1/3] test: sharpen button label unit test   Philippe REYNES
• [PATCH v2 2/3] drivers: gpio: keep output value for input on sandbox   Philippe REYNES
• [PATCH v2 3/3] cmd/button: return button status   Philippe REYNES
• [PATCH] mx6qsabrelite: increase offset for environment on SPI   Denis Pynkin
• [PATCH] mx6qsabrelite: increase offset for environment on SPI   Tom Rini
• [RFC PATCH 0/3] Start of MStar/SigmaStar Arm v7 SoC support   Tom Rini
• Question: Chromebook Flip C100p Uboot build and flash   张 宁
• Question: Chromebook Flip C100p Uboot build and flash   zhangn1985 at outlook.com
• [PATCH v2] common: Kconfig: Add dependency for default variables strings   Tom Rini
• [PATCH 1/1] bootm: update image OS image size when decompressing   Tom Rini
• [PATCH] env: Crash in 'env import' when using checksum and a specific size   Tom Rini
• [PATCH] mtd: nand: Fix nand write error with bad block addresses above 32-bit   Tom Rini
• [PATCH v2] Fix data abort caused by mis-aligning FIT data   Tom Rini
• [PATCH] ARM: MediaTek: amend IC description for MediaTek MT8512   Tom Rini
• [PATCH 1/2] doc: describe source repository   Tom Rini
• [PATCH 2/2] doc: describe building with GCC   Tom Rini
• [PATCH] Makefile: mrproper shall delete doc/output/   Tom Rini
• [PATCH 1/1] test: do no assume hush parser in validate_empty()   Tom Rini
• [PATCH] mx6qsabrelite: increase offset for environment on SPI   Denis Pynkin
• [PATCH] dns325: Correct CONFIG_NR_DRAM_BANKS parameter   Tom Rini
• [PATCH] RFC: tegra: xhci: Allocate from non-cached memory   Marek Vasut
• [PATCH] Azure/GitLab/Travis: Add SH4 r2dplus machine with various PCI ethernet options   Marek Vasut
• SPL FIT configuration signature verification   Reuben Dowle
• [PATCH 0/2] iEi Puzzle-M801 board support   Luka Kovacic
• Pull request for UEFI sub-system for efi-2020-10-rc5   Heinrich Schuchardt
• U-Boot fails dfu on edison   Ferry Toth
• [PATCH 1/1] bootm: add {arch,board}_preboot_os() to bootm.h   Heinrich Schuchardt
• [PATCH 1/1] bootm: add {arch,board}_preboot_os() to bootm.h   Heinrich Schuchardt
• [PATCH 1/1] rockchip: make_fit_atf: ignore empty PT_LOAD segment   Heinrich Schuchardt
• [PATCH v1 15/16] arm: socfpga: soc64: Skip handoff data access in SSBL   Tan, Ley Foon
• Pull request for UEFI sub-system for efi-2020-10-rc5   Heinrich Schuchardt
• [RFC PATCH 0/1] Anti rollback protection for FIT Images   Thirupathaiah Annapureddy
• [RFC PATCH 1/1] image: add anti rollback protection for FIT Images   Thirupathaiah Annapureddy
• [RFC PATCH 0/1] Anti rollback protection for FIT Images   Thirupathaiah Annapureddy
• [PATCH v2 1/7] Revert "riscv: Clear pending interrupts before enabling IPIs"   Bin Meng
• [PATCH v2 3/7] riscv: Use a valid bit to ignore already-pending IPIs   Bin Meng
• [PATCH v2 5/7] riscv: Consolidate fences into AMOs for available_harts_lock   Bin Meng
• [PATCH v2 6/7] riscv: Ensure gp is NULL or points to valid data   Bin Meng
• [PATCH v2 7/7] riscv: Add some comments to start.S   Bin Meng
• [RFC PATCH 0/1] Anti rollback protection for FIT Images   Rasmus Villemoes
• [PATCH v4 2/8] timer: Add helper for drivers using timebase fallback   Bin Meng
• [PATCH v4 3/8] riscv: Rework Andes PLMT as a UCLASS_TIMER driver   Bin Meng
• u-boot leaves watchdog enabled by default   Michael Walle
• [PATCH 1/1] bootm: add {arch,board}_preboot_os() to bootm.h   Michael Walle
• u-boot leaves watchdog enabled by default   Rayagonda Kokatanur
• u-boot leaves watchdog enabled by default   Michael Walle
• [RFC PATCH 0/1] Anti rollback protection for FIT Images   Rasmus Villemoes
• [GIT PULL] please pull mmc-2020-9-15   Peng Fan
• [PATCH 1/2] ram: sifive: Check return value on clk_enable()   Bin Meng
• [PATCH 2/2] ram: sifive: Remove regmap dependency   Bin Meng
• [PATCH v4 5/8] riscv: Rework Sifive CLINT as UCLASS_TIMER driver   Bin Meng
• [PATCH 1/1] bootm: add {arch,board}_preboot_os() to bootm.h   Heinrich Schuchardt
• [PATCH v2 2/7] riscv: Match memory barriers between send_ipi_many and handle_ipi   Rick Chen
• [PATCH v2 3/7] riscv: Use a valid bit to ignore already-pending IPIs   Rick Chen
• [PATCH v4 7/8] riscv: Update Kendryte device tree for new CLINT driver   Bin Meng
• [PATCH v4 8/8] riscv: Update SiFive device tree for new CLINT driver   Bin Meng
• [PATCH v2 4/7] riscv: Clear pending IPIs on initialization   Rick Chen
• [PATCH] Azure/GitLab/Travis: Add SH4 r2dplus machine with various PCI ethernet options   Bin Meng
• [PATCH v4 3/8] riscv: Rework Andes PLMT as a UCLASS_TIMER driver   Sean Anderson
• [PATCH v4 5/8] riscv: Rework Sifive CLINT as UCLASS_TIMER driver   Sean Anderson
• [PATCH v2 4/7] riscv: Clear pending IPIs on initialization   Sean Anderson
• [RFC PATCH 0/3] Start of MStar/SigmaStar Arm v7 SoC support   Daniel Palmer
• u-boot leaves watchdog enabled by default   Chris Packham
• [PATCH 0/5] mtd: pxa3xx_nand: add support for Armada 8k   Baruch Siach
• [PATCH 1/5] arm: dts: armada-cp110-slave: add missing cps_nand   Baruch Siach
• [PATCH 2/5] arm: dts: armada-cp110-master: update nand-controller   Baruch Siach
• [PATCH 3/5] mtd: pxa3xx_nand: port to use driver model   Baruch Siach
• [PATCH 4/5] mtd: pxa3xx_nand: remove dead code   Baruch Siach
• [PATCH 5/5] mtd: nand: pxa3xx: enable NAND controller if the SoC needs it   Baruch Siach
• [PATCH 0/5] arm: dts: k3-j7200: Add PMIC node for CPU AVS   Gowtham Tammana
• [PATCH 1/5] power: pmic: tps65941: Add compatible for LP876441   Gowtham Tammana
• [PATCH 2/5] arm/dts: k3-j7200-r5-common: Add pmic lp876441 node   Gowtham Tammana
• [PATCH 3/5] arm/dts: k3-j7200-r5-common: Hook buck1_reg to vtm supply   Gowtham Tammana
• [PATCH 4/5] arm/dts: k3-j7200-r5-common: Add VTM node   Gowtham Tammana
• [PATCH 5/5] configs: j7200_evm_r5_defconfig: Enable AVS, PMIC and dependent configs   Gowtham Tammana
• [PATCH v2] mx6qsabrelite: increase the environment offset   Denis Pynkin
• [PATCH] efi: change usage syntax   Heinrich Schuchardt
• [RFC PATCH 1/2] efi: arm: do not overlap non ram memory on efi allocation   Heinrich Schuchardt
• [RFC PATCH 2/2] efi_memory: refine overlap_only_ram description   Heinrich Schuchardt
• [PATCH v2] mx6qsabrelite: increase the environment offset   Tom Rini
• [PATCH 1/1] rockchip: make_fit_atf: ignore empty PT_LOAD segment   Tom Rini
• [RFC PATCH 1/1] image: add anti rollback protection for FIT Images   Tom Rini
• [PATCH 0/5] J7200: Add HyperFlash boot support   Lokesh Vutla
• [PATCH 0/3] Configure J721E Main R5FSS1 to Split-mode & env   Lokesh Vutla
• [PATCH 0/8] Early-boot support of R5FSS from A72 U-Boot for J7200 SoCs   Lokesh Vutla
• [PATCH 0/3] MCU R5F branch-only boot on J7200 SoCs   Lokesh Vutla
• [PATCH v2 0/5] Add spi boot support to am335x-icev2   Lokesh Vutla
• [PATCH] lib: fdt: Fix fdtdec_setup_mem..() conversion to livetree API   Michal Simek
• [PATCH] lib: fdt: Fix fdtdec_setup_mem..() conversion to livetree API   Tom Rini
• [PATCH] net: ravb: Fix NULL pointer access   Biju Das
• [PATCH] arm: rmobile: Identify R8A7796 r1.3 SoC   Biju Das
• [PATCH v5 0/9] riscv: Clean up timer drivers   Sean Anderson
• [PATCH v5 1/9] riscv: Rework riscv timer driver to only support S-mode   Sean Anderson
• [PATCH v5 2/9] timer: Add helper for drivers using timebase fallback   Sean Anderson
• [PATCH v5 3/9] timer: Add a test for timer_timebase_fallback   Sean Anderson
• [PATCH v5 4/9] riscv: Rework Andes PLMT as a UCLASS_TIMER driver   Sean Anderson
• [PATCH v5 5/9] riscv: Clean up initialization in Andes PLIC   Sean Anderson
• [PATCH v5 6/9] riscv: Rework Sifive CLINT as UCLASS_TIMER driver   Sean Anderson
• [PATCH v5 7/9] riscv: clk: Add CLINT clock to kendryte clock driver   Sean Anderson
• [PATCH v5 8/9] riscv: Update Kendryte device tree for new CLINT driver   Sean Anderson
• [PATCH v5 9/9] riscv: Update SiFive device tree for new CLINT driver   Sean Anderson
• [PATCH] include: phy: fix NULL pointer check in phy_write()   Michal Simek
• [PATCH] net: ravb: Fix NULL pointer access   Michal Simek
• [PATCH 0/4] Add HopeRun HiHope RZ/G2M board support   Biju Das
• [PATCH 1/4] pinctrl: renesas: Fix PINCTRL_PFC_R8A774A1 help description   Biju Das
• [PATCH 2/4] arm: dts: r8a774a1: Import DTS from Linux 5.9-rc4   Biju Das
• [PATCH 3/4] arm: rmobile: Add RZ/G2M SoC   Biju Das
• [PATCH 4/4] arm: rmobile: Add HopeRun HiHope RZ/G2M board support   Biju Das
• [PATCH v2 00/46] dm: Print device name in dev_xxx like Linux   Sean Anderson
• [PATCH v2 01/46] dm: syscon: Fix calling dev_dbg with an uninitialized device   Sean Anderson
• [PATCH v2 02/46] firmware: ti_sci: Fix not calling dev_err with a device   Sean Anderson
• [PATCH v2 03/46] i2c: mxc: Fix dev_err being called on a nonexistant variable   Sean Anderson
• [PATCH v2 04/46] mtd: nand: pxa3xx: Fix not calling dev_xxx with a device   Sean Anderson
• [PATCH v2 05/46] mtd: nand: sunxi: Fix not calling dev_err with a device   Sean Anderson
• [PATCH v2 06/46] mtd: spi: Include dm.h in spi-nor-core.c   Sean Anderson
• [PATCH v2 07/46] mtd: spi: Fix logging in spi-nor-tiny   Sean Anderson
• [PATCH v2 08/46] mtd: spi-nand: Fix not calling dev_err with a device   Sean Anderson
• [PATCH v2 09/46] mmc: Add mmc_dev()   Sean Anderson
• [PATCH v2 10/46] mmc: bcm2835-host: Fix not calling dev_dbg with a device   Sean Anderson
• [PATCH v2 11/46] mmc: mtk-sd: Fix not calling dev_err with a device   Sean Anderson
• [PATCH v2 12/46] mailbox: k3: Fix not calling dev_err with a device   Sean Anderson
• [PATCH v2 13/46] nand: atmel: Fix not calling dev_xxx with a device   Sean Anderson
• [PATCH v2 14/46] nand: brcmnand: Fix not calling dev_err() with a device   Sean Anderson
• [PATCH v2 15/46] nand: vybrid: Re-introduce vf610_nfc.dev   Sean Anderson
• [PATCH v2 16/46] net: bcm6368: Fix not calling dev_info with a device   Sean Anderson
• [PATCH v2 17/46] net: mdio: Fix not calling dev_dbg with a device   Sean Anderson
• [PATCH v2 18/46] net: mvneta: Fix not always calling dev_err with a device   Sean Anderson
• [PATCH v2 19/46] net: mvneta: Convert netdev_xxx to dev_xxx   Sean Anderson
• [PATCH v2 20/46] net: mvpp2: Fix not calling dev_xxx with a device   Sean Anderson
• [PATCH v2 21/46] net: mvpp2: Convert netdev_xxx to dev_xxx   Sean Anderson
• [PATCH v2 22/46] linux/compat.h: Remove netdev_xxx functions   Sean Anderson
• [PATCH v2 23/46] net: sunxi: Fix not calling dev_xxx with a device   Sean Anderson
• [PATCH v2 24/46] net: sun8i_emac: Fix not calling dev_xxx with a device   Sean Anderson
• [PATCH v2 25/46] net: ti: cpsw: Fix not calling dev_dbg with a device   Sean Anderson
• [PATCH v2 26/46] phy: marvell: Fix not calling dev_err with a device   Sean Anderson
• [PATCH v2 27/46] phy: rockchip: Fix not calling dev_err with a device   Sean Anderson
• [PATCH v2 28/46] phy: sun4i-usb: Fix not calling dev_err with a device   Sean Anderson
• [PATCH v2 29/46] phy: ti: Fix not calling dev_err with a device   Sean Anderson
• [PATCH v2 30/46] phy: usbphyc: Fix not calling dev_err with a device   Sean Anderson
• [PATCH v2 31/46] remoteproc: Remove unused function rproc_elf_sanity_check   Sean Anderson
• [PATCH v2 32/46] remoteproc: k3-r5: Fix not calling dev_xxx with a device   Sean Anderson
• [PATCH v2 33/46] remoteproc: k3: Fix not calling dev_xxx with a device   Sean Anderson
• [PATCH v2 34/46] soc: qualcomm: Fix not calling dev_err with a device   Sean Anderson
• [PATCH v2 35/46] spi: sunxi: Fix not calling dev_err with a device   Sean Anderson
• [PATCH v2 36/46] spi: zynqmp_gqspi: Fix not calling dev_err with a device   Sean Anderson
• [PATCH v2 37/46] sysreset: ti: Fix not calling dev_err with a device   Sean Anderson
• [PATCH v2 38/46] usb: cdns3: Fix not calling dev_xxx with a device   Sean Anderson
• [PATCH v2 39/46] usb: dwc2: Fix not calling dev_xxx with a device   Sean Anderson
• [PATCH v2 40/46] usb: dwc3: Fix not calling dev_xxx with a device   Sean Anderson
• [PATCH v2 41/46] usb: dwc3: ti: Fix not calling dev_err with a device   Sean Anderson
• [PATCH v2 42/46] usb: dwc3: Don't include asm-generic/io.h   Sean Anderson
• [PATCH v2 43/46] usb: musb-new: sunxi: Fix not calling dev_err with a device   Sean Anderson
• [PATCH v2 44/46] video: stm32: Fix not calling dev_xxx with a device   Sean Anderson
• [PATCH v2 45/46] dm: Use symbolic constants for log levels in dev_xxx   Sean Anderson
• [PATCH v2 46/46] dm: Print device name in dev_xxx like Linux   Sean Anderson
• [PATCH] include: phy: fix NULL pointer check in phy_write()   Tom Rini
• [PATCH] Azure/GitLab/Travis: Add SH4 r2dplus machine with various PCI ethernet options   Tom Rini
• [GIT PULL] please pull mmc-2020-9-15   Tom Rini
• [GIT PULL] TI changes for v2021.01 next   Lokesh Vutla
• [RFC PATCH 1/1] image: add anti rollback protection for FIT Images   Thirupathaiah Annapureddy
• [PATCH 1/2] mmc: mmc_of_parse: Enable 52 MHz support with "cap-mmc-highspeed"   Alexandru Gagniuc
• [PATCH v2 2/2] mmc: stm32_sdmmc2: Use mmc_of_parse() to read host capabilities   Alexandru Gagniuc
• [RFC PATCH 1/1] image: add anti rollback protection for FIT Images   Simon Glass
• [PATCH 1/1] doc: qemu: debug UART settings for QEMU ARM virt   Heinrich Schuchardt
• U-Boot issue   Heinrich Schuchardt
• Boot Over Ehternet- Linux Server to Raspberry Pis- Using U-boot   Heinrich Schuchardt
• U-Boot FIT Signature Verification   Heinrich Schuchardt
• [GIT PULL] TI changes for v2021.01 next   Tom Rini
• [PATCH v2 4/7] riscv: Clear pending IPIs on initialization   Rick Chen
• [PATCH v2 5/7] riscv: Consolidate fences into AMOs for available_harts_lock   Rick Chen
• [PATCH v2 02/46] firmware: ti_sci: Fix not calling dev_err with a device   Nishanth Menon
• [PATCH] mmc: stm32_sdmmc2: Use mmc_of_parse() to read host capabilities   Jaehoon Chung
• [PATCH v2 6/7] riscv: Ensure gp is NULL or points to valid data   Rick Chen
• [PATCH v2 0/5] powerpc, mpc83xx: add DM_ETH support   Heiko Schocher
• [PATCH 1/5] imx7: ccm: correct target interface num   peng.fan at nxp.com
• [PATCH 2/5] imx8mq: fix FRAC_PLL_REFCLK_SEL_MASK   peng.fan at nxp.com
• [PATCH 3/5] imx8mq: fix SSCG_PLL_REFCLK_SEL_x   peng.fan at nxp.com
• [PATCH 4/5] imx8m: clock_imx8mm: add missed return   peng.fan at nxp.com
• [PATCH 5/5] imx8mp: Remove parts MIMX8ML7 and MIMX8ML5 support   peng.fan at nxp.com
• [PATCH v2 7/7] riscv: Add some comments to start.S   Rick Chen
• [PATCH v2 36/46] spi: zynqmp_gqspi: Fix not calling dev_err with a device   Michal Simek
• [PATCH v2 30/46] phy: usbphyc: Fix not calling dev_err with a device   Patrice CHOTARD
• [PATCH v2 39/46] usb: dwc2: Fix not calling dev_xxx with a device   Patrice CHOTARD
• [PATCH] ARM: dts: stm32mp1: DT alignment with Linux kernel v5.9-rc4   Patrick Delaunay
• [PATCH 0/6] Add HopeRun HiHope RZ/G2N board support   Biju Das
• [PATCH 1/6] arm: rmobile: Add RZ/G2N SoC   Biju Das
• [PATCH 2/6] arm: renesas: Add config option for R8A774B1 SoC   Biju Das
• [PATCH 3/6] arm: dts: r8a774b1: Import DTS from Linux 5.9-rc4   Biju Das
• [PATCH 4/6] clk: renesas: Add R8A774B1 clock tables   Biju Das
• [PATCH 5/6] pinctrl: renesas: r8a77965: Add R8A774B1 PFC support   Biju Das
• [PATCH 6/6] arm: rmobile: Add HopeRun HiHope RZ/G2N board support   Biju Das
• U-Boot FIT Signature Verification   AKASHI Takahiro
• [PATCH] xilinx: versal: Fix compilation error when !CONFIG_NET   Michal Simek
• [PATCH 1/1] rockchip: make_fit_atf: ignore empty PT_LOAD segment   Kever Yang
• [PATCH] cmd: pxe: Add relocation to pxe_sub cmds   Michal Simek
• [PATCH] riscv: Only enable OF_BOARD_FIXUP for S-Mode   Leo Liang
• Pull request: u-boot-rockchip-20200916   Kever Yang
• [PATCH v1 0/9] toradex: Misc fixes for v2020.10   Igor Opaniuk
• [PATCH] cmd: optee_rpmb command for read/write of rpmb from optee   Gaurav Jain
• [PATCH 1/1] rockchip: make_fit_atf: ignore empty PT_LOAD segment   Heinrich Schuchardt
• [PATCH v1 0/9] toradex: Misc fixes for v2020.10   Stefano Babic
• [PATCH 0/6] Add HopeRun HiHope RZ/G2H board support   Biju Das
• [PATCH 1/6] arm: rmobile: Add RZ/G2H SoC   Biju Das
• [PATCH 2/6] arm: renesas: Add config option for R8A774E1 SoC   Biju Das
• [PATCH 3/6] arm: dts: r8a774e1: Import DTS from Linux 5.9-rc4   Biju Das
• [PATCH 4/6] clk: renesas: Add R8A774E1 clock tables   Biju Das
• [PATCH 5/6] pinctrl: renesas: r8a77951: Add R8A774E1 PFC support   Biju Das
• [PATCH 6/6] arm: rmobile: Add HopeRun HiHope RZ/G2H board support   Biju Das
• [PATCH] configs: am335x_evm_defconfig: Enable CONFIG_OF_LIBFDT_OVERLAY   Vignesh Raghavendra
• [PATCH v2 6/7] riscv: Ensure gp is NULL or points to valid data   Sean Anderson
• U-Boot FIT Signature Verification   Heinrich Schuchardt
• [PATCH] xilinx: zynqmp-r5: Increase amount of MALLOC space   Michal Simek
• U-Boot FIT Signature Verification   Joakim Tjernlund
• [PATCH] clk: fixed-rate: Enable DM_FLAG_PRE_RELOC flag   Michal Simek
• U-Boot FIT Signature Verification   Heinrich Schuchardt
• U-Boot FIT Signature Verification   Joakim Tjernlund
• U-Boot FIT Signature Verification   Heinrich Schuchardt
• [PATCH v2 01/46] dm: syscon: Fix calling dev_dbg with an uninitialized device   Patrick DELAUNAY
• [PATCH v2 30/46] phy: usbphyc: Fix not calling dev_err with a device   Patrick DELAUNAY
• [PATCH v2 01/46] dm: syscon: Fix calling dev_dbg with an uninitialized device   Sean Anderson
• [PATCH v2 39/46] usb: dwc2: Fix not calling dev_xxx with a device   Sean Anderson
• [PATCH 00/13] ehci-mx6: update and fix   peng.fan at nxp.com
• [PATCH 01/13] usb: ehci-mx6: Add powerup_fixup implementation   peng.fan at nxp.com
• [PATCH 02/13] usb: ehci-mx6: preparing for ARM64 build   peng.fan at nxp.com
• [PATCH 03/13] usb: ehci-mx6: Add i.MX8 OTG controller support   peng.fan at nxp.com
• [PATCH 04/13] usb: ehci-mx6: Turn on the power domain of USB PHY   peng.fan at nxp.com
• [PATCH 05/13] usb: ehci-mx6: Update driver to support i.MX8MM   peng.fan at nxp.com
• [PATCH 06/13] usb: ehci-mx6: fix controller index for imx8m and imx8   peng.fan at nxp.com
• [PATCH 07/13] usb: ehci-mx6: Enable iMX EHCI driver for iMX8M Nano   peng.fan at nxp.com
• [PATCH 08/13] usb: ehci-mx6: configure usb out of suspend state   peng.fan at nxp.com
• [PATCH 09/13] usb: ehci-mx6: Fix USB QTD data buffer error   peng.fan at nxp.com
• [PATCH 10/13] ehci-mx6: Add OTG ID detecting by GPIO   peng.fan at nxp.com
• [PATCH 11/13] usb: ehci-mx6: Fix usb type issue in DM driver   peng.fan at nxp.com
• [PATCH 12/13] usb: ehci-mx6: Fix PHY power up issue on iMX8 platforms   peng.fan at nxp.com
• [PATCH 13/13] usb: ehci-mx6: Improve the bind function   peng.fan at nxp.com
• [PATCH v2 44/46] video: stm32: Fix not calling dev_xxx with a device   Patrick DELAUNAY
• [PATCH 00/16] usb: gadget: update   peng.fan at nxp.com
• [PATCH 01/16] usb: gadget: Add ep_config call back to usb_gadget_ops   peng.fan at nxp.com
• [PATCH 02/16] usb: gadget: don't change ep name for dwc3 while ep autoconfig   peng.fan at nxp.com
• [PATCH 03/16] usb: gadget: OS String support   peng.fan at nxp.com
• [PATCH 04/16] usb: gadget: move utf8_to_utf16le to header file   peng.fan at nxp.com
• [PATCH 05/16] usb: gadget: OS Feature Descriptors support   peng.fan at nxp.com
• [PATCH 06/16] usb: gadget: add WCID support for mfgtool   peng.fan at nxp.com
• [PATCH 07/16] usb: gadget: fastboot: add ext properties for WCID   peng.fan at nxp.com
• [PATCH 08/16] usb: gadget: set correct usb_configuration for os_desc_config   peng.fan at nxp.com
• [PATCH 09/16] usb: gadget: update os_desc_config when add config   peng.fan at nxp.com
• [PATCH 10/16] usb: gadget: add super speed support   peng.fan at nxp.com
• [PATCH 11/16] usb: fastboot: add super speed support   peng.fan at nxp.com
• [PATCH 12/16] usb: gadget: dnl: set dnl to be super speed   peng.fan at nxp.com
• [PATCH 13/16] usb: composite: force gadget to be USB2 for HS only function   peng.fan at nxp.com
• [PATCH 14/16] usb: udc: ci: update speed handling   peng.fan at nxp.com
• [PATCH 15/16] usb: gadget: fastboot: use correct max packet size   peng.fan at nxp.com
• [PATCH 16/16] usb: gaget: ci: set ep's desc when enable ep   peng.fan at nxp.com
• [PATCH v2 39/46] usb: dwc2: Fix not calling dev_xxx with a device   Patrick DELAUNAY
• [PATCH 0/5] doc: board: xilinx: Update Xilinx documentation   Michal Simek
• [PATCH 1/5] MAINTAINERS: Record documentation for Xilinx platforms   Michal Simek
• [PATCH 2/5] doc: board: xilinx: zynq.rst: Update zynq documentation   Michal Simek
• [PATCH 3/5] doc: board: xilinx: Update links to DT binding docs   Michal Simek
• [PATCH 4/5] doc: board: xilinx: Add documentation for ZynqMP   Michal Simek
• [PATCH 5/5] doc: board: xilinx: Add documentation for ZynqMP R5   Michal Simek
• [PATCH 02/13] usb: ehci-mx6: preparing for ARM64 build   Marek Vasut
• [PATCH 03/13] usb: ehci-mx6: Add i.MX8 OTG controller support   Marek Vasut
• [PATCH 04/13] usb: ehci-mx6: Turn on the power domain of USB PHY   Marek Vasut
• [PATCH 05/13] usb: ehci-mx6: Update driver to support i.MX8MM   Marek Vasut
• [PATCH v4 20/27] Makefile: Warn against using CONFIG_SPL_FIT_GENERATOR   Michal Simek
• [PATCH 06/13] usb: ehci-mx6: fix controller index for imx8m and imx8   Marek Vasut
• [PATCH 09/13] usb: ehci-mx6: Fix USB QTD data buffer error   Marek Vasut
• [PATCH v2 00/46] dm: Print device name in dev_xxx like Linux   Patrick DELAUNAY
• [PATCH 10/13] ehci-mx6: Add OTG ID detecting by GPIO   Marek Vasut
• [PATCH v2 39/46] usb: dwc2: Fix not calling dev_xxx with a device   Sean Anderson
• [PATCH 11/13] usb: ehci-mx6: Fix usb type issue in DM driver   Marek Vasut
• [PATCH 13/13] usb: ehci-mx6: Improve the bind function   Marek Vasut
• [PATCH 1/5] MAINTAINERS: Record documentation for Xilinx platforms   Heinrich Schuchardt
• [PATCH] net: ravb: Fix NULL pointer access   Marek Vasut
• [PATCH] arm: rmobile: Identify R8A7796 r1.3 SoC   Marek Vasut
• [PATCH 13/13] usb: ehci-mx6: Improve the bind function   Peng Fan
• [PATCH 1/5] MAINTAINERS: Record documentation for Xilinx platforms   Michal Simek
• [PATCH 3/4] arm: rmobile: Add RZ/G2M SoC   Marek Vasut
• [PATCH 4/4] arm: rmobile: Add HopeRun HiHope RZ/G2M board support   Marek Vasut
• [PATCH 0/5] sunxi: video: Add V3S simple-framebuffer   Martin Cerveny
• [PATCH 1/5] sunxi: video: No double clock on DE2   Martin Cerveny
• [PATCH 2/5] pwm: sunxi: v3s: Enable PWM0   Martin Cerveny
• [PATCH 3/5] sunxi: video: v3s: Enable LCD support   Martin Cerveny
• [PATCH 4/5] arm: dts: v3s: Add support for simple-framebuffer with DE2/TCON   Martin Cerveny
• [PATCH 5/5] sunxi: add drivers and configs needed for LCD display   Martin Cerveny
• [PATCH 13/13] usb: ehci-mx6: Improve the bind function   Marek Vasut
• [PATCH 1/5] sunxi: video: No double clock on DE2   Maxime Ripard
• [PATCH 4/5] arm: dts: v3s: Add support for simple-framebuffer with DE2/TCON   Maxime Ripard
• [PATCH 5/5] sunxi: add drivers and configs needed for LCD display   Maxime Ripard
• [PATCH v2 1/2] x86: acpi: Fix calculation of DSDT length   Wolfgang Wallner
• [PATCH v2 2/2] x86: acpi: Add memset to initialize SPCR table   Wolfgang Wallner
• [PATCH 1/2] x86: acpi: Fix calculation of DSDT length   Wolfgang Wallner
• [PATCH v2 2/2] x86: acpi: Add memset to initialize SPCR table   Andy Shevchenko
• U-Boot FIT Signature Verification   REITHER Robert - Contractor
• [PATCH] net: ravb: Fix NULL pointer access   Biju Das
• [PATCH 5/5] sunxi: add drivers and configs needed for LCD display   Martin Cerveny
• [PATCH 3/4] arm: rmobile: Add RZ/G2M SoC   Biju Das
• [PATCH 1/2] x86: acpi: Fix calculation of DSDT length   Andy Shevchenko
• [PATCH 4/5] arm: dts: v3s: Add support for simple-framebuffer with DE2/TCON   Martin Cerveny
• [PATCH 1/5] sunxi: video: No double clock on DE2   Martin Cerveny
• Boot Over Ehternet- Linux Server to Raspberry Pis- Using U-boot   Dennis Gilmore
• [PATCH v2 0/5] powerpc, mpc83xx: add DM_ETH support   Tom Rini
• [PATCH v2 0/5] powerpc, mpc83xx: add DM_ETH support   Rasmus Villemoes
• Pull request for UEFI sub-system for efi-2020-10-rc5   Tom Rini
• Pull request: u-boot-rockchip-20200916   Tom Rini
• U-Boot FIT Signature Verification   Tom Rini
• U-Boot FIT Signature Verification   Philippe REYNES
• [PATCH 1/5] sunxi: video: No double clock on DE2   Vasily Khoruzhick
• [PATCH] net: ravb: Fix NULL pointer access   Marek Vasut
• [PATCH] fpga: kconfig: Rename SPL_FPGA_SUPPORT to SPL_FPGA   Simon Glass
• [PATCH v4 1/3] fdtdec: optionally add property no-map to created reserved memory node   Simon Glass
• [PATCH 1/2] power: regulator: gpio-regulator: protect count value   Simon Glass
• [PATCH 2/2] power: regulator: gpio-regulator: Convert to use APIs which support live DT   Simon Glass
• [PATCH] dm: add cells_count parameter in live DT APIs of_parse_phandle_with_args   Simon Glass
• [PATCH 1/3] dev: Disambiguate errors in uclass_find   Simon Glass
• [PATCH 2/3] net: Expose some errors generated in net_init   Simon Glass
• [PATCH 3/3] log: syslog: Handle errors in net_init   Simon Glass
• [PATCH 1/4] remoteproc: Remove unused function rproc_elf_sanity_check   Simon Glass
• [PATCH 2/4] net: mdio: Supply appropriate devices for dev_dgb calls   Simon Glass
• [PATCH 3/4] dm: Use symbolic constants for log levels in dev_xxx()   Simon Glass
• [PATCH 1/1] log: mute messages generated by log drivers   Simon Glass
• [PATCH 1/1] doc: remove redundant doc/README.log   Simon Glass
• [PATCH 1/1] net: use log_err() for 'No ethernet found' message   Simon Glass
• [PATCH v5 3/9] timer: Add a test for timer_timebase_fallback   Simon Glass
• [PATCH] cmd: pxe: Add relocation to pxe_sub cmds   Simon Glass
• [PATCH v2 03/46] i2c: mxc: Fix dev_err being called on a nonexistant variable   Simon Glass
• [PATCH v2 08/46] mtd: spi-nand: Fix not calling dev_err with a device   Simon Glass
• [PATCH v2 09/46] mmc: Add mmc_dev()   Simon Glass
• [PATCH v2 11/46] mmc: mtk-sd: Fix not calling dev_err with a device   Simon Glass
• [PATCH v2 12/46] mailbox: k3: Fix not calling dev_err with a device   Simon Glass
• [PATCH v2 13/46] nand: atmel: Fix not calling dev_xxx with a device   Simon Glass
• [PATCH v2 18/46] net: mvneta: Fix not always calling dev_err with a device   Simon Glass
• [PATCH v2 19/46] net: mvneta: Convert netdev_xxx to dev_xxx   Simon Glass
• [PATCH v2 20/46] net: mvpp2: Fix not calling dev_xxx with a device   Simon Glass
• [PATCH v2 21/46] net: mvpp2: Convert netdev_xxx to dev_xxx   Simon Glass
• [PATCH v2 22/46] linux/compat.h: Remove netdev_xxx functions   Simon Glass
• [PATCH v2 23/46] net: sunxi: Fix not calling dev_xxx with a device   Simon Glass
• [PATCH v2 24/46] net: sun8i_emac: Fix not calling dev_xxx with a device   Simon Glass
• [PATCH v2 34/46] soc: qualcomm: Fix not calling dev_err with a device   Simon Glass
• [PATCH v2 45/46] dm: Use symbolic constants for log levels in dev_xxx   Simon Glass
• [PATCH 2/4] net: mdio: Supply appropriate devices for dev_dgb calls   Sean Anderson
• [PATCH 1/3] dev: Disambiguate errors in uclass_find   Sean Anderson
• [PATCH 2/4] net: mdio: Supply appropriate devices for dev_dgb calls   Simon Glass
• [PATCH 1/3] dev: Disambiguate errors in uclass_find   Simon Glass
• [PATCH v2 0/5] powerpc, mpc83xx: add DM_ETH support   Heiko Schocher
• [PATCH v2 0/5] powerpc, mpc83xx: add DM_ETH support   Heiko Schocher
• U-Boot FIT Signature Verification   AKASHI Takahiro
• U-Boot FIT Signature Verification   takahiro.akashi at linaro.org
• U-Boot FIT Signature Verification   takahiro.akashi at linaro.org
• [PATCH 1/4] treewide: configs: get rid of unused CONFIG_DEFAULT_CONSOLE   Andre Heider
• [PATCH 2/4] treewide: configs: fold CONFIG_DEFAULT_CONSOLE   Andre Heider
• [PATCH 3/4] Remove whitelist entry CONFIG_DEFAULT_CONSOLE   Andre Heider
• [PATCH 4/4] configs: smdkv310: get rid of unused EXYNOS4_DEFAULT_UART_OFFSET   Andre Heider
• [PATCH v2 00/30] Add DM support for omap PWM backlight   Grygorii Strashko
• [PATCH v2 39/46] usb: dwc2: Fix not calling dev_xxx with a device   Patrick DELAUNAY
• [PATCH v2 03/46] i2c: mxc: Fix dev_err being called on a nonexistant variable   Heiko Schocher
• [PATCH v2 0/2] Enable OPTEE and "optee_rpmb" command   Gaurav Jain
• [PATCH v2 1/2] configs: lx2160a: Enable OPTEE support   Gaurav Jain
• [PATCH v2 2/2] cmd: optee_rpmb command for read/write of rpmb from optee   Gaurav Jain
• [PATCH] wdt: designware: fix timeout calculation due to expecting KHz   Jack Mitchell
• [PATCH] clk: rockchip: rk3399: implement getting wdt/alive clocks   Jack Mitchell
• [PATCH] clk: rockchip: rk3399: implement getting wdt/alive clocks   Philipp Tomsich
• [PATCH] wdt: designware: fix timeout calculation due to expecting KHz   Sean Anderson
• [PATCH v2 2/7] riscv: Match memory barriers between send_ipi_many and handle_ipi   Leo Liang
• [PATCH v2 3/7] riscv: Use a valid bit to ignore already-pending IPIs   Leo Liang
• [PATCH v2 7/7] riscv: Add some comments to start.S   Leo Liang
• [PATCH] board: ti: j721e: Fix OSPI node compatible   Vignesh Raghavendra
• [PATCH 0/2] mtd: cfi_mtd: Add DMA support for reads   Vignesh Raghavendra
• [PATCH 1/2] dma: Reduce error level when DMA channel type does not exist   Vignesh Raghavendra
• [PATCH 2/2] mtd: cfi_mtd: Use DMA for reads   Vignesh Raghavendra
• [PATCH 0/2] log: allow for message continuation   Heinrich Schuchardt
• [PATCH 1/2] log: allow for message continuation   Heinrich Schuchardt
• [PATCH 2/2] test: log: test message continuation   Heinrich Schuchardt
• [PATCH v2 0/5] powerpc, mpc83xx: add DM_ETH support   Tom Rini
• [PATCH 1/2] fit: cipher: aes: allow to store the IV in the FIT image   Philippe Reynes
• [PATCH 2/2] fit: cipher: aes: allow to read the IV in the FIT image   Philippe Reynes
• [PATCH v2 0/5] powerpc, mpc83xx: add DM_ETH support   Heiko Schocher
• [PATCH] include: phy: fix NULL pointer check in phy_write()   Tom Rini
• [PATCH] MAINTAINERS: update clk entry git tree   Tom Rini
• [PATCH] lib: fdt: Fix fdtdec_setup_mem..() conversion to livetree API   Tom Rini
• [PATCH] MAINTAINERS: add myself as reviewer for SquashFS   Tom Rini
• [PATCH] MAINTAINERS: add myself as reviewer for SquashFS   Tom Rini
• [PATCH 1/1] doc: qemu: debug UART settings for QEMU ARM virt   Tom Rini
• [PATCH] board: renesas: ebisu: Drop CA57 check in reset_cpu()   Lad Prabhakar
• [PATCH] dma: ti: k3-udma: Reset the channel during release   Vignesh Raghavendra
• [PATCH] mtd: spi-nor-ids: Add Winbond W25M512JV flash entry   Lad Prabhakar
• [PATCH 1/1] rng: stm32mp1: use log() instead of printf()   Heinrich Schuchardt
• [PATCH] pinctrl: renesas: pfc-r8a77990: Import PFC table   Lad Prabhakar
• [PATCH 1/1] disk: typo Terra Bytes   Heinrich Schuchardt
• [PATCH 1/1] mtd: fix typos in drivers/mtd/Kconfig   Heinrich Schuchardt
• [PATCH 1/1] efi_loader: QEMU CONFIG_EFI_GRUB_ARM32_WORKAROUND=n   Heinrich Schuchardt
• [PATCH 1/4] treewide: configs: get rid of unused CONFIG_DEFAULT_CONSOLE   Krzysztof Kozlowski
• [PATCH 2/4] treewide: configs: fold CONFIG_DEFAULT_CONSOLE   Krzysztof Kozlowski
• [PATCH 4/4] configs: smdkv310: get rid of unused EXYNOS4_DEFAULT_UART_OFFSET   Krzysztof Kozlowski
• [PATCH 1/1] efi_loader: QEMU CONFIG_EFI_GRUB_ARM32_WORKAROUND=n   Tom Rini
• [PATCH 1/1] disk: typo Terra Bytes   Simon Glass
• [PATCH 1/1] efi_loader: QEMU CONFIG_EFI_GRUB_ARM32_WORKAROUND=n   Heinrich Schuchardt
• [PATCH 1/1] sandbox: support CTRL-C processing in U-Boot   Heinrich Schuchardt
• [PATCH 1/1] efi_loader: QEMU CONFIG_EFI_GRUB_ARM32_WORKAROUND=n   Tom Rini
• [PATCH v2 00/30] Add DM support for omap PWM backlight   Dario Binacchi
• Ways to copy FIT image from the flash to RAM   Sean Anderson
• [PATCH] pinctrl: renesas: pfc-r8a77990: Import PFC table   Marek Vasut
• [PATCH v2 0/5] powerpc, mpc83xx: add DM_ETH support   Tom Rini
• [PATCH] board: renesas: ebisu: Drop CA57 check in reset_cpu()   Marek Vasut
• [PATCH] pinctrl: renesas: pfc-r8a77990: Import PFC table   Prabhakar Mahadev Lad
• RPi4 U-Boot freeze   Stefan Agner
• [PATCH] pinctrl: renesas: pfc-r8a77990: Import PFC table   Prabhakar Mahadev Lad
• [PATCH v2] pinctrl: renesas: pfc-r8a77990: Sync PFC tables with Linux 5.8   Lad Prabhakar
• [PATCH v6 01/17] dfu: rename dfu_tftp_write() to dfu_write_by_name()   AKASHI Takahiro
• [PATCH v6 01/17] dfu: rename dfu_tftp_write() to dfu_write_by_name()   Tom Rini
• [PATCH 1/1] efi_loader: QEMU CONFIG_EFI_GRUB_ARM32_WORKAROUND=n   Heinrich Schuchardt
• [PATCH 1/1] rng: stm32mp1: use log() instead of printf()   Sughosh Ganu
• [PATCH v6 12/12] riscv: Add FPIOA and GPIO support for Kendryte K210   Leo Liang
• [PATCH v6 01/17] dfu: rename dfu_tftp_write() to dfu_write_by_name()   Lukasz Majewski
• [PATCH 1/2] env/sf.c: use a variable to hold the sector size   Rasmus Villemoes
• [PATCH 2/2] env: add CONFIG_ENV_SECT_SIZE_AUTO   Rasmus Villemoes
• [PATCH] powerpc: reduce number of WATCHDOG_RESET calls from flush_cache   Rasmus Villemoes
• [PATCH] pci: layerscape: Remove the shadow SVR definitiones   Zhiqiang Hou
• configs: lx2162aqds: enable CONFIG_BOARD_EARLY_INIT_R   Priyanka Jain
• [PATCH] armv8: dts: fsl-lx2160a: add gpio0 gpio1 gpio3 DT nodes   Priyanka Jain
• [PATCH next v7 00/10] Add support MediaTek USB3 DRD driver   Chunfeng Yun
• [PATCH next v7 01/10] dt-binding: usb: add bindings for some common properties   Chunfeng Yun
• [PATCH next v7 02/10] dt-bindings: usb: mtu3: add bindings for MediaTek USB3 DRD   Chunfeng Yun
• [PATCH next v7 03/10] usb: add USB_SPEED_SUPER_PLUS   Chunfeng Yun
• [PATCH next v7 04/10] usb: common: add define of usb_speed_string()   Chunfeng Yun
• [PATCH next v7 05/10] usb: add MediaTek USB3 DRD driver   Chunfeng Yun
• [PATCH next v7 06/10] usb: gadget: Add bcdDevice for the MTU3 USB Gadget Controller   Chunfeng Yun
• [PATCH next v7 07/10] arm: dts: mt8512: add usb related nodes   Chunfeng Yun
• [PATCH next v7 08/10] configs: mt8512: enable fastboot   Chunfeng Yun
• [PATCH next v7 09/10] configs: mt8512: add USB host related configs   Chunfeng Yun
• [PATCH next v7 10/10] MAINTAINERS: add USB driver to ARM MEDIATEK   Chunfeng Yun
• [PATCH v2 3/3] gpio: mpc8xxx: support fsl-layerscape platform.   Priyanka Jain
• [PATCH] mmc: fsl_esdhc_imx: replace all readl/writel to esdhc_read32/esdhc_write32   Stefano Babic
• [PATCH 0/4] amlogic: vim3: add support for dynamic PCIe enable   Neil Armstrong
• [PATCH 1/4] ARM: dts: sync amlogic G12A/SM1 DT from Linux 5.9-rc1   Neil Armstrong
• [PATCH 2/4] board: amlogic: add a vim3 specific board support   Neil Armstrong
• [PATCH 3/4] configs: vim3: use the vim3 board support   Neil Armstrong
• [PATCH 4/4] board: amlogic: vim3: add support for dynamic PCIe enable   Neil Armstrong
• [PATCH 1/1] rng: stm32mp1: use log() instead of printf()   Heinrich Schuchardt
• [PATCH v6 12/12] riscv: Add FPIOA and GPIO support for Kendryte K210   Sean Anderson
• Function xhci_bulk_tx( ) failed to handle double transfer EVENT TRB case in one call   Ran Wang
• [PATCH 1/1] efi_loader: QEMU CONFIG_EFI_GRUB_ARM32_WORKAROUND=n   Tom Rini
• [PATCH v4 1/3] net: add a generic udp protocol   Philippe Reynes
• [PATCHv4 2/3] sandbox: enable support of generic udp protocol   Philippe Reynes
• [PATCH v4 3/3] sntp: use udp framework   Philippe Reynes
• [PATCH] dma: ti: k3-udma: Reset the channel during release   Grygorii Strashko
• [PATCH v2 00/30] Add DM support for omap PWM backlight   Grygorii Strashko
• [PATCH 1/2] net: pfe_eth: Fix resoure leak in pfe_spi_flash_init   Priyanka Jain
• [PATCH] pci: layerscape: Fixup PCIe EP mode DT nodes for LX2160A rev2   Priyanka Jain
• [PATCH] pci: layerscape: Remove the shadow SVR definitiones   Priyanka Jain
• arm: dts: lx2162aqds: support eMMC HS400 mode   Priyanka Jain
• [PATCH 5/5] imx8mp: Remove parts MIMX8ML7 and MIMX8ML5 support   sbabic at denx.de
• [RESEND PATCH v1 4/9] colibri_imx7: wrap video specific funcs with ifdefs   sbabic at denx.de
• [PATCH v1 1/2] colibri-imx8qxp: rename all occurences to colibri-imx8x   sbabic at denx.de
• [PATCH 3/5] imx8mq: fix SSCG_PLL_REFCLK_SEL_x   sbabic at denx.de
• [PATCH v1 2/2] apalis-imx8qm: rename all occurences to apalis-imx8   sbabic at denx.de
• [PATCH 2/2] board: tbs2910: Disable CONFIG_ENV_VARS_UBOOT_CONFIG in defconfig   sbabic at denx.de
• [PATCH 1/5] imx7: ccm: correct target interface num   sbabic at denx.de
• [RESEND PATCH v1 8/9] colibri_imx6: provide fdtfile in env instead of setting it in runtime   sbabic at denx.de
• [RESEND PATCH v1 9/9] apalis_imx6: provide fdtfile in env instead of setting it in runtime   sbabic at denx.de
• [RESEND PATCH v1 2/9] colibri_imx7: use splashcreen value instead of legacy function   sbabic at denx.de
• [PATCH 4/5] imx8m: clock_imx8mm: add missed return   sbabic at denx.de
• [PATCH 2/5] imx8mq: fix FRAC_PLL_REFCLK_SEL_MASK   sbabic at denx.de
• [PATCH v3] mmc: fsl_esdhc_imx: check the clock stable status after config the clock rate.   sbabic at denx.de
• [RESEND PATCH v1 1/9] colibri-imx6ull: use splashcreen value instead of legacy function   sbabic at denx.de
• [RESEND PATCH v1 3/9] toradex: drop legacy show_boot_logo function and use splashscreen   sbabic at denx.de
• [PATCH v2] mx6qsabrelite: increase the environment offset   sbabic at denx.de
• [RESEND PATCH v1 7/9] colibri_imx7: use preboot for fdtfile evaluation   sbabic at denx.de
• [PATCH] ARM: mx6: ddr: Add support for iMX6UL/ULL/SL/SDL   sbabic at denx.de
• [RESEND PATCH v1 5/9] colibri-imx6ull: use preboot for fdtfile evaluation   sbabic at denx.de
• [RESEND PATCH v1 6/9] colibri_vf: use preboot for fdtfile evaluation   sbabic at denx.de
• [GIT PULL] Pull request: u-boot-imx u-boot-imx-20200918   Stefano Babic
• [PATCH] spi: mpc8xxx_spi.c: fix cs activate/deactivate   Rasmus Villemoes
• [PATCH] ARM: mx6: ddr: Add support for iMX6UL/ULL/SL/SDL   Marek Vasut
• [PATCH] ARM: mx6: ddr: Add support for iMX6UL/ULL/SL/SDL   Stefano Babic
• [PATCH 4/4] arm: rmobile: Add HopeRun HiHope RZ/G2M board support   Biju Das
• [PATCH 1/2] env/sf.c: use a variable to hold the sector size   Tom Rini
• [PATCH] ARM: mx6: ddr: Add support for iMX6UL/ULL/SL/SDL   Marek Vasut
• [PATCH] powerpc: reduce number of WATCHDOG_RESET calls from flush_cache   Tom Rini
• [PATCH] net: ravb: Fix NULL pointer access   Biju Das
• [PATCH 2/2] board: tbs2910: Disable CONFIG_ENV_VARS_UBOOT_CONFIG in defconfig   Soeren Moch
• [PATCH 2/2] board: tbs2910: Disable CONFIG_ENV_VARS_UBOOT_CONFIG in defconfig   Stefano Babic
• [PATCH 2/2] board: tbs2910: Disable CONFIG_ENV_VARS_UBOOT_CONFIG in defconfig   Soeren Moch
• [PATCH 1/2] arm: rmobile: Add RZ/G2M SoC   Biju Das
• [PATCH 2/2] arm: rmobile: Add HopeRun HiHope RZ/G2M board support   Biju Das
• [PATCH 2/2] board: tbs2910: Disable CONFIG_ENV_VARS_UBOOT_CONFIG in defconfig   Tom Rini
• [PATCH 2/2] board: tbs2910: Disable CONFIG_ENV_VARS_UBOOT_CONFIG in defconfig   Soeren Moch
• [PATCH 1/1] efi_loader: QEMU CONFIG_EFI_GRUB_ARM32_WORKAROUND=n   Heinrich Schuchardt
• [PATCH 1/1] efi_loader: QEMU CONFIG_EFI_GRUB_ARM32_WORKAROUND=n   Tom Rini
• [PATCH] cfi_flash: Fix devicetree address determination   Andre Przywara
• [PATCH 4/4] board: amlogic: vim3: add support for dynamic PCIe enable   Kevin Hilman
• [PATCH 0/4] amlogic: vim3: add support for dynamic PCIe enable   Kevin Hilman
• [GIT PULL] Pull request: u-boot-imx u-boot-imx-20200918   Tom Rini
• [PATCH 1/2] arm: rmobile: Add RZ/G2M SoC   Marek Vasut
• [PATCH 2/2] arm: rmobile: Add HopeRun HiHope RZ/G2M board support   Marek Vasut
• [PATCH] net: ravb: Fix NULL pointer access   Marek Vasut
• [PATCH v4 3/3] sntp: use udp framework   Simon Glass
• [PATCH 1/1] sandbox: support CTRL-C processing in U-Boot   Simon Glass
• [PATCH 1/1] sandbox: support CTRL-C processing in U-Boot   Heinrich Schuchardt
• Pull request for UEFI sub-system for efi-2020-10-rc5 (2)   Heinrich Schuchardt
• [PATCH 1/1] arm: enable DM_RNG on QEMU by default   Heinrich Schuchardt
• [PATCH] net: ravb: Fix NULL pointer access   Biju Das
• [PATCH 1/2] arm: rmobile: Add RZ/G2M SoC   Biju Das
• [PATCH 1/1] efi_loader: QEMU CONFIG_EFI_GRUB_ARM32_WORKAROUND=n   Mark Kettenis
• RPi4 U-Boot freeze   Stefan Agner
• [PATCH 1/1] efi_loader: QEMU CONFIG_EFI_GRUB_ARM32_WORKAROUND=n   Heinrich Schuchardt
• [PATCH 2/2] arm: rmobile: Add HopeRun HiHope RZ/G2M board support   Biju Das
• [PATCH v3 1/8] dt-bindings: clock: import Qualcomm IPQ4019 bindings   Tom Rini
• [PATCH v3 2/8] IPQ40xx: clk: Use dt-bindings instead of hardcoding   Tom Rini
• [PATCH v3 3/8] IPQ40xx: Add SMEM support   Tom Rini
• [PATCH v3 4/8] reset: Add IPQ40xx reset controller driver   Tom Rini
• [PATCH v3 6/8] phy: add driver for Qualcomm IPQ40xx USB PHY   Tom Rini
• [PATCH v3 7/8] usb: dwc3: Add Qualcomm DWC3 compatible string   Tom Rini
• [PATCH v3 8/8] IPQ40xx: Add USB nodes   Tom Rini
• [PATCH] fs/squashfs: Fix Coverity Scan defects   Tom Rini
• [PATCH] fs/squashfs: Fix Coverity Scan defects   Tom Rini
• [PATCH v2] configs: bcmstb: Disable networking support   Tom Rini
• [PATCH v5] cmd: mem: fix range of bitflip test   Tom Rini
• [PATCH] net: ravb: Fix NULL pointer access   Marek Vasut
• [PATCH 1/2] arm: rmobile: Add RZ/G2M SoC   Marek Vasut
• [PATCH 2/2] arm: rmobile: Add HopeRun HiHope RZ/G2M board support   Marek Vasut
• [PATCH 1/1] sandbox: support CTRL-C processing in U-Boot   Simon Glass
• Cold boot consistently fails to load file from SD   Mauro Condarelli
• [PATCH 0/3] doc: global data pointer   Heinrich Schuchardt
• [PATCH 1/3] global_data.h: convert GD_FLG_* to enum   Heinrich Schuchardt
• [PATCH 2/3] global_data.h: add Sphinx documentation   Heinrich Schuchardt
• [PATCH 3/3] doc: global data pointer   Heinrich Schuchardt
• [PATCH 1/1] MAINTAINERS: assign doc/arch/sandbox.rst   Heinrich Schuchardt
• [PATCH 1/1] doc/arch/sandbox.rst: reformat command line options   Heinrich Schuchardt
• [PATCH 1/1] sandbox: support CTRL-C processing in U-Boot   Heinrich Schuchardt
• [PATCH] net: ravb: Fix NULL pointer access   Biju Das
• [PATCH 1/2] arm: rmobile: Add RZ/G2M SoC   Biju Das
• [PATCH 2/2] arm: rmobile: Add HopeRun HiHope RZ/G2M board support   Biju Das
• [PATCH] net: ravb: Fix NULL pointer access   Marek Vasut
• Cold boot consistently fails to load file from SD   Daniel Schwierzeck
• [PATCH 1/2] arm: rmobile: Add RZ/G2M SoC   Marek Vasut
• [PATCH 2/2] arm: rmobile: Add HopeRun HiHope RZ/G2M board support   Marek Vasut
• [PATCH v3 1/4] mmc: pic32: Refresh PIC32 MMC driver   Daniel Schwierzeck
• [PATCH v3 2/4] mmc: pic32: Refresh PIC32 MMC driver   Daniel Schwierzeck
• [PATCH v3 3/4] mmc: pic32: Refresh PIC32 MMC driver   Daniel Schwierzeck
• [PATCH v3 4/4] mmc: pic32: Refresh PIC32 MMC driver   Daniel Schwierzeck
• [PATCH] mips: dts: Fix device tree warnings for PIC32MZDA   Daniel Schwierzeck
• [PATCH v2 1/2] mips: dts: Fix PIC32MZDA GPIO register definitions   Daniel Schwierzeck
• [PATCH v2 2/2] mips: dts: Fix PIC32MZDA GPIO register definitions   Daniel Schwierzeck
• [BUG] sandbox: './u-boot -l ' fails   Heinrich Schuchardt
• [PATCH v4 0/8] mips/usb: Add Octeon xHCI USB support   Daniel Schwierzeck
• [PATCH v3 0/9] mips: Add Octeon DDR4 init code   Daniel Schwierzeck
• [PATCH v1 00/10] mips: octeon: Add bootoctlinux command for Octeon Linux kernel booting   Daniel Schwierzeck
• RPi4 U-Boot freeze   Sean Anderson
• Cold boot consistently fails to load file from SD   Mauro Condarelli
• [PATCH 1/1] sandbox: support CTRL-C processing in U-Boot   Simon Glass
• [PATCH 0/5] bloblist: Add alignment control and a command   Simon Glass
• [PATCH 1/5] bloblist: Add a command   Simon Glass
• [PATCH 2/5] bloblist: Compare addresses rather than pointers in tests   Simon Glass
• [PATCH 3/5] bloblist: Tidy up the data alignment   Simon Glass
• [PATCH 4/5] bloblist: Allow custom alignment for blobs   Simon Glass
• [PATCH 5/5] bloblist: Fix up a few comments   Simon Glass
• [PATCH] net: ravb: Fix NULL pointer access   Biju Das
• [PATCH v2 0/3] doc: global data pointer   Heinrich Schuchardt
• [PATCH v2 1/3] global_data.h: convert GD_FLG_* to enum   Heinrich Schuchardt
• [PATCH v2 2/3] global_data.h: add Sphinx documentation   Heinrich Schuchardt
• [PATCH v2 3/3] doc: global data pointer   Heinrich Schuchardt
• RPi4 U-Boot freeze   Stefan Agner
• [RFC 1/1] doc/build/gcc.rst: required packages for Suse   Heinrich Schuchardt
• [PATCH 1/1] doc/build/gcc.rst: add missing apt-get *install*   Heinrich Schuchardt
• Pull request for UEFI sub-system for efi-2020-10-rc5 (2)   Tom Rini
• [PATCH 0/5] x86: Updates to some commands   Simon Glass
• [PATCH 0/5] x86: Updates to some commands   Simon Glass
• [PATCH 1/5] x86: hob: Add way to show a single hob entry   Simon Glass
• [PATCH 2/5] x86: hob: Try to show a name instead of a GUID   Simon Glass
• [PATCH 3/5] x86: Allow showing details about a HOB entry   Simon Glass
• [PATCH 4/5] x86: Add support for more than 8 MTRRs   Simon Glass
• [PATCH 5/5] x86: video: Show information about each video device   Simon Glass
• [PATCH 0/3] Patches to allow running u-boot on vocore2 board   Mauro Condarelli
• [PATCH 1/3] Small fixes to reduce size and ensure correct console output.   Mauro Condarelli
• [PATCH 2/3] Enlarge SPL malloc area to prevent failure in lzma decompression.   Mauro Condarelli
• [PATCH 3/3] Fix missing __udivdi3 in SquashFS implementation.   Mauro Condarelli
• [PATCH 1/2] microblaze: start.S: Factor out exception setup code to __setup_exceptions   Ovidiu Panait
• [PATCH 2/2] microblaze: start.S: Use board_init_f_alloc/init in early init   Ovidiu Panait
• [PATCH] usb: storage: increase retries to 20   Stefan Agner
• Pending x86 patches   Simon Glass
• [PATCH] usb: storage: increase retries to 20   Stefan Agner
• [PATCH 3/3] Fix missing __udivdi3 in SquashFS implementation.   Tom Rini
• [PATCH] acpi: device: Fix check for sequence number   Bin Meng
• x86: apl: Acessing SPI flash when booting with Coreboot/U-Boot   Bin Meng
• [PATCH v1] x86: edison: Move config SYS_MALLOC_LEN to Kconfig   Bin Meng
• [PATCH v1] cmd: acpi: Print revisions in hex format   Bin Meng
• [PATCH] x86: fsp: Replace e-mmc with emmc in devicetree bindings   Bin Meng
• [PATCH v1] x86: edison: Move config SYS_MALLOC_LEN to Kconfig   Bin Meng
• [PATCH v1] cmd: acpi: Print revisions in hex format   Bin Meng
• [PATCH] x86: fsp: Replace e-mmc with emmc in devicetree bindings   Bin Meng
• [PATCH v2 1/2] x86: acpi: Fix calculation of DSDT length   Bin Meng
• [PATCH v2 2/2] x86: acpi: Add memset to initialize SPCR table   Bin Meng
• [PATCH v2 1/2] x86: acpi: Fix calculation of DSDT length   Bin Meng
• [PATCH v2 2/2] x86: acpi: Add memset to initialize SPCR table   Bin Meng
• [PATCH] x86: Drop duplicate declaration of emulator state   Bin Meng
• [PATCH v1] cmd: acpi: Print revisions in hex format   Bin Meng
• [PATCH] pci: layerscape: Remove the shadow SVR definitiones   Z.q. Hou
• [PATCH v2 01/16] x86: Update the bootparam header   Bin Meng
• Pending x86 patches   Bin Meng
• [PATCH 2/2] ram: add ddr4 dual x8 configuration   Ryan Chen
• [PATCH 1/2] ram: move aspeed ram driver into drivers/ directory   Ryan Chen
• [PATCH] x86: Drop duplicate declaration of emulator state   Heinrich Schuchardt
• [PATCH 00/11] powerpc: Remove some platforms support   Priyanka Jain
• [PATCH 01/11] board/freescale: Remove p1023rdb board support   Priyanka Jain
• [PATCH 02/11] configs: Remove P1010RDB secure boot configs   Priyanka Jain
• [PATCH 03/11] board/freescale: Remove P1025RDB board support   Priyanka Jain
• [PATCH 04/11] board/freescale: Remove P1020UTM board support   Priyanka Jain
• [PATCH 05/11] board/freescale: Remove P1020MBG board support   Priyanka Jain
• [PATCH 06/11] board/freescale: Remove P1021RDB board support   Priyanka Jain
• [PATCH 07/11] board/freescale: Remove P1024RDB board support   Priyanka Jain
• [PATCH 08/11] configs: Remove P3041DS secure boot configs   Priyanka Jain
• [PATCH 09/11] powerpc:Remove P4080DS secure boot configs   Priyanka Jain
• [PATCH 10/11] board/freescale: Remove P5020DS board support   Priyanka Jain
• [PATCH 11/11] configs: Remove P5040DS secure boot configs   Priyanka Jain
• [PATCH 2/2] cosmetic: reset: ast2500: Rename driver and configs   Ryan Chen
• [PATCH 1/2] reset: ast2500: Use SCU for reset control   Ryan Chen
• [PATCH v2 0/4] amlogic: vim3: add support for dynamic PCIe enable   Neil Armstrong
• [PATCH v2 1/4] ARM: dts: sync amlogic G12A/SM1 DT from Linux 5.9-rc1   Neil Armstrong
• [PATCH v2 2/4] board: amlogic: add a vim3 specific board support   Neil Armstrong
• [PATCH v2 3/4] configs: vim3: use the vim3 board support   Neil Armstrong
• [PATCH v2 4/4] board: amlogic: vim3: add support for dynamic PCIe enable   Neil Armstrong
• [PATCH] gpio/mpc83xx_spisel_boot.c: include log.h   Rasmus Villemoes
• [EXT] Re: [PATCH] defconfig: espressobin: enable NET_RANDOM_ETHADDR   Stefan Roese
• [PATCH v2] cmd: acpi: Print revisions in hex format   Andy Shevchenko
• [PATCH v1] cmd: acpi: Print revisions in hex format   Andy Shevchenko
• [PATCH v2 0/5] powerpc, mpc83xx: add DM_ETH support   Rasmus Villemoes
• [PATCH v2] cmd: acpi: Print revisions in hex format   Bin Meng
• u-boot leaves watchdog enabled by default   Stefan Roese
• [PATCH 1/1] mtd: fix typos in drivers/mtd/Kconfig   Stefan Roese
• [PATCH] musb-new: Use predefined configuration data for SUN50I_H6   Roman Stratiienko
• [PATCH v2 0/5] powerpc, mpc83xx: add DM_ETH support   Heiko Schocher
• [PATCH] gpio/mpc83xx_spisel_boot.c: include log.h   Heiko Schocher
• [PATCH 1/2] arm: rmobile: Add RZ/G2M SoC   Biju Das
• [PATCH v3 39/57] tpm: cr50: Add ACPI support   Andy Shevchenko
• [PATCH v3 0/7] riscv: Correctly handle IPIs already pending upon boot   Sean Anderson
• [PATCH v3 1/7] Revert "riscv: Clear pending interrupts before enabling IPIs"   Sean Anderson
• [PATCH v3 2/7] riscv: Match memory barriers between send_ipi_many and handle_ipi   Sean Anderson
• [PATCH v3 3/7] riscv: Use a valid bit to ignore already-pending IPIs   Sean Anderson
• [PATCH v3 4/7] riscv: Clear pending IPIs on initialization   Sean Anderson
• [PATCH v3 5/7] riscv: Consolidate fences into AMOs for available_harts_lock   Sean Anderson
• [PATCH v3 6/7] riscv: Ensure gp is NULL or points to valid data   Sean Anderson
• [PATCH v3 7/7] riscv: Add some comments to start.S   Sean Anderson
• [PATCH v3 39/57] tpm: cr50: Add ACPI support   Andy Shevchenko
• [PATCH 5/5] sunxi: add drivers and configs needed for LCD display   Maxime Ripard
• [PATCH 4/5] arm: dts: v3s: Add support for simple-framebuffer with DE2/TCON   Maxime Ripard
• [PATCH] defconfig: espressobin: enable NET_RANDOM_ETHADDR   Pali Rohár
• [PATCH] defconfig: espressobin: enable NET_RANDOM_ETHADDR   Marek Behun
• [PATCH] cfi_flash: Fix devicetree address determination   Stefan Roese
• [PATCH] defconfig: espressobin: enable NET_RANDOM_ETHADDR   Pali Rohár
• [PATCH v3 02/57] x86: acpi: Add base asl files for common x86 devices   Wolfgang Wallner
• Please pull u-boot-x86   Bin Meng
• [PATCH] defconfig: espressobin: enable NET_RANDOM_ETHADDR   Tom Rini
• Pending x86 patches   Simon Glass
• [EXT] [PATCH] defconfig: espressobin: enable NET_RANDOM_ETHADDR   Kostya Porotchkin
• [PATCH v3 7/7] riscv: Add some comments to start.S   Heinrich Schuchardt
• [PATCH 1/2] arm: rmobile: Add RZ/G2M SoC   Marek Vasut
• [PATCH] net: ravb: Fix NULL pointer access   Marek Vasut
• [PATCH] Revert "i2c: rcar_i2c: Set the slave address from rcar_i2c_xfer"   Lad Prabhakar
• [PATCH v3 7/7] riscv: Add some comments to start.S   Sean Anderson
• [PATCH 1/1] rng: stm32mp1: use log() instead of printf()   Patrick DELAUNAY
• [PATCH] usb: xhci-rcar: Add support for R8A774A1 SoC   Lad Prabhakar
• [PATCH 1/2] arm: rmobile: Add RZ/G2M SoC   Biju Das
• u-boot leaves watchdog enabled by default   Tom Rini
• Please pull u-boot-x86   Tom Rini
• [ANN] U-Boot v2020.10-rc5 released   Tom Rini
• u-boot leaves watchdog enabled by default   Heinrich Schuchardt
• u-boot leaves watchdog enabled by default   Tom Rini
• [PATCH v3 08/10] spi: dw: Add mem_ops   Eugeniy Paltsev
• u-boot leaves watchdog enabled by default   Michael Walle
• u-boot leaves watchdog enabled by default   Michael Walle
• u-boot leaves watchdog enabled by default   Chris Packham
• [PATCH v2] configs: powerpc: Don't set CONFIG_ENV_ADDR for QorIQ SPIFLASH   Chris Packham
• [PATCH v2] configs: powerpc: Don't set CONFIG_ENV_ADDR for QorIQ SPIFLASH   Tom Rini
• [PATCH 1/8] sunxi: board: Use a more descriptive variable name   André Przywara
• [PATCH 2/8] sunxi: board: Add a helper to get the SPL DT name   André Przywara
• [PATCH 3/8] sunxi: board: Simplify Pine A64 DT selection logic   André Przywara
• [PATCH 4/8] sunxi: board: Add PinePhone DT selection logic   André Przywara
• [PATCH 5/8] sunxi: board: Save the chosen DT name in the SPL header   André Przywara
• [PATCH 6/8] sunxi: board: Set fdtfile to match the DT chosen by SPL   André Przywara
• u-boot leaves watchdog enabled by default   Heinrich Schuchardt
• [PATCH v3 1/7] Revert "riscv: Clear pending interrupts before enabling IPIs"   Rick Chen
• [PATCH v3 4/7] riscv: Clear pending IPIs on initialization   Rick Chen
• [PATCH v3 6/7] riscv: Ensure gp is NULL or points to valid data   Rick Chen
• [PATCH 5/8] sunxi: board: Save the chosen DT name in the SPL header   Samuel Holland
• u-boot leaves watchdog enabled by default   Tom Rini
• [PATCH 6/8] sunxi: board: Set fdtfile to match the DT chosen by SPL   Samuel Holland
• [PATCH 1/2] tools: socfpgaimage: Add check params function for Arria 10 (v1)   Ley Foon Tan
• [PATCH 2/2] tools: socfpgaimage: Add param entry point (ep) support for Arria 10 (v1)   Ley Foon Tan
• [PATCH v5 1/9] riscv: Rework riscv timer driver to only support S-mode   Rick Chen
• [PATCH v5 2/9] timer: Add helper for drivers using timebase fallback   Rick Chen
• [PATCH] usb: xhci: fix event trb handling missed   Ran Wang
• [PATCH v3 01/17] x86: Update the bootparam header   Bin Meng
• [PATCH v3 11/17] x86: zboot: Add an 'setup' subcommand   Bin Meng
• [PATCH v3 14/17] x86: zboot: Add an option to dump the setup information   Bin Meng
• [PATCH v3 10/17] x86: zboot: Add an 'load' subcommand   Bin Meng
• [PATCH 1/2] arm: rmobile: Add RZ/G2M SoC   Biju Das
• [PATCH v3 07/17] x86: zboot: Set up a sub-command structure   Bin Meng
• [PATCH v3 00/17] x86: zboot: Enhance the 'zboot' command   Bin Meng
• [PATCH] net: ravb: Remove writeext function call   Biju Das
• u-boot leaves watchdog enabled by default   Michael Walle
• [PATCH 0/5] edison: Support for writing an xFSTK image   Bin Meng
• [PATCH v3 05/57] x86: apl: Correct PCIE_ECAM_BASE   Bin Meng
• [PATCH v3 15/57] x86: link: Allow more space for U-Boot   Bin Meng
• [PATCH 5/8] sunxi: board: Save the chosen DT name in the SPL header   André Przywara
• [PATCH v3 40/57] x86: fsp: Update the FSP API with the end-firmware method   Bin Meng
• [PATCH v3 44/57] x86: Correct the assembly guard in e820.h   Bin Meng
• [PATCH v3 45/57] x86: Add a header guard to asm/acpi_table.h   Bin Meng
• [PATCH v3 49/57] x86: acpi: Set the log category for x86 table generation   Bin Meng
• [PATCH v3 52/57] x86: fsp: Add more debugging for silicon init   Bin Meng
• [PATCH v3 53/57] x86: fsp: Show FSP-S or FSP-M address in fsp_get_header()   Bin Meng
• [PATCH v3 54/57] acpi: Use defines for field lengths   Bin Meng
• [PATCH] arm: mach-rmobile: Mark the default s_init function as weak   Biju Das
• [PATCH v3 55/57] x86: Add a way to add to the e820 memory table   Bin Meng
• [PATCH v3 56/57] x86: Move include of bitops out of ACPI region   Bin Meng
• [PATCH v3 39/57] tpm: cr50: Add ACPI support   Bin Meng
• [PATCH v3 00/57] dm: Add programatic generation of ACPI tables (part D)   Bin Meng
• [PATCH v3 39/57] tpm: cr50: Add ACPI support   Andy Shevchenko
• [PATCH] arm: rmobile: Use imply for BOARD_EARLY_INIT_F   Biju Das
• [PATCH] timer: mchp-pit64b: add support for pit64b   Eugen.Hristev at microchip.com
• [PATCH 1/5] x86: hob: Add way to show a single hob entry   Bin Meng
• [PATCH 2/5] x86: hob: Try to show a name instead of a GUID   Bin Meng
• [PATCH 3/5] x86: Allow showing details about a HOB entry   Bin Meng
• [PATCH 4/5] x86: Add support for more than 8 MTRRs   Bin Meng
• [PATCH 5/5] x86: video: Show information about each video device   Bin Meng
• [PATCHv5 02/18] configs: enable DM_MDIO for LS1021A-TWR and LS1021A-TSN   Z.q. Hou
• [PATCH] board: renesas: Remove empty s_init function   Biju Das
• [PATCH] board: renesas: remove empty board_early_init_f function   Biju Das
• [PATCH] usb: dwc2: Fix contorl OUT transfer issue   Chance.Yang
• [PATCHv6 00/18] powerpc: convert p1010, p1020 and p2020 RDB boards to DM_ETH   Zhiqiang Hou
• [PATCHv6 01/18] phy: make phy_connect_fixed work with a null mdio bus   Zhiqiang Hou
• [PATCHv6 02/18] net: fsl_mdio: Change to use virtual address   Zhiqiang Hou
• [PATCHv6 03/18] net: fsl_mdio: Correct the MII management register block address   Zhiqiang Hou
• [PATCHv6 04/18] net: tsec: convert to use DM_MDIO when DM_ETH enabled   Zhiqiang Hou
• [PATCHv6 05/18] net: tsec: Add fixed-link PHY support   Zhiqiang Hou
• [PATCHv6 06/18] net: tsec: Add the compatible string "gianfar" support   Zhiqiang Hou
• [PATCHv6 07/18] powerpc: mpc8xxx: Don't compile cpu_eth_init() when DM_ETH enabled   Zhiqiang Hou
• [PATCHv6 08/18] fsl: p1_p2_rdb: Move vsc7835 firmware uploading to board_early_init_r()   Zhiqiang Hou
• [PATCHv6 09/18] configs: p1_p2_rdb: Add the default address of vsc7385 firmware   Zhiqiang Hou
• [PATCHv6 10/18] dts: powerpc: p1020rdb: Add eTSEC DT nodes   Zhiqiang Hou
• [PATCHv6 11/18] powerpc: p1_p2_rdb: Don't compile board_eth_init() when DM_ETH enabled   Zhiqiang Hou
• [PATCHv6 12/18] configs: P1020RDB: Enable DM_ETH config   Zhiqiang Hou
• [PATCHv6 13/18] dts: powerpc: p1010rdb: Add eTSEC DT nodes   Zhiqiang Hou
• [PATCHv6 14/18] powerpc: p1010rdb: Compile legacy ethernet init function when no DM_ETH   Zhiqiang Hou
• [PATCHv6 15/18] configs: P1010RDB: Enable DM_ETH config   Zhiqiang Hou
• [PATCHv6 16/18] dts: powerpc: p2020rdb: Add eTSEC DT nodes   Zhiqiang Hou
• [PATCHv6 17/18] configs: P2020RDB: Enable DM_ETH config   Zhiqiang Hou
• [PATCHv6 18/18] configs: enable DM_MDIO for LS1021A-TWR and LS1021A-TSN   Zhiqiang Hou
• [PATCH] board: renesas: draak: Drop CA57 reset   Biju Das
• [PATCHv6 00/18] powerpc: convert p1010, p1020 and p2020 RDB boards to DM_ETH   Zhiqiang Hou
• [PATCHv6 01/18] phy: make phy_connect_fixed work with a null mdio bus   Zhiqiang Hou
• [PATCHv6 02/18] net: fsl_mdio: Change to use virtual address   Zhiqiang Hou
• [PATCHv6 03/18] net: fsl_mdio: Correct the MII management register block address   Zhiqiang Hou
• [PATCHv6 04/18] net: tsec: convert to use DM_MDIO when DM_ETH enabled   Zhiqiang Hou
• [PATCHv6 05/18] net: tsec: Add fixed-link PHY support   Zhiqiang Hou
• [PATCHv6 06/18] net: tsec: Add the compatible string "gianfar" support   Zhiqiang Hou
• [PATCHv6 07/18] powerpc: mpc8xxx: Don't compile cpu_eth_init() when DM_ETH enabled   Zhiqiang Hou
• [PATCHv6 08/18] fsl: p1_p2_rdb: Move vsc7835 firmware uploading to board_early_init_r()   Zhiqiang Hou
• [PATCHv6 09/18] configs: p1_p2_rdb: Add the default address of vsc7385 firmware   Zhiqiang Hou
• [PATCHv6 10/18] dts: powerpc: p1020rdb: Add eTSEC DT nodes   Zhiqiang Hou
• [PATCHv6 11/18] powerpc: p1_p2_rdb: Don't compile board_eth_init() when DM_ETH enabled   Zhiqiang Hou
• [PATCHv6 12/18] configs: P1020RDB: Enable DM_ETH config   Zhiqiang Hou
• [PATCHv6 13/18] dts: powerpc: p1010rdb: Add eTSEC DT nodes   Zhiqiang Hou
• [PATCHv6 14/18] powerpc: p1010rdb: Compile legacy ethernet init function when no DM_ETH   Zhiqiang Hou
• [PATCHv6 15/18] configs: P1010RDB: Enable DM_ETH config   Zhiqiang Hou
• [PATCHv6 16/18] dts: powerpc: p2020rdb: Add eTSEC DT nodes   Zhiqiang Hou
• [PATCHv6 17/18] configs: P2020RDB: Enable DM_ETH config   Zhiqiang Hou
• [PATCHv6 18/18] configs: enable DM_MDIO for LS1021A-TWR and LS1021A-TSN   Zhiqiang Hou
• [PATCH v1 00/22] Add Intel Diamond Mesa SoC support   Siew Chin Lim
• [PATCH v1 01/22] arm: socfpga: Move Stratix10 and Agilex to use TARGET_SOCFPGA_SOC64   Siew Chin Lim
• [PATCH v1 02/22] arm: socfpga: dm: Add base address for Intel Diamond Mesa   Siew Chin Lim
• [PATCH v1 03/22] arm: socfpga: dm: Add firewall support for Agilex and Diamond Mesa   Siew Chin Lim
• [PATCH v1 04/22] arm: socfpga: Rename Stratix10 and Agilex handoff common macros   Siew Chin Lim
• [PATCH v1 05/22] arm: socfpga: Changed wrap_pll_config_s10.c to wrap_pll_config_soc64.c   Siew Chin Lim
• [PATCH v1 06/22] arm: socfpga: Changed system_manager_s10.c to system_manager_soc64.c   Siew Chin Lim
• [PATCH v1 07/22] arm: socfpga: Rearrange sequence of macros in handoff_soc64.h   Siew Chin Lim
• [PATCH v1 08/22] arm: socfpga: Restructure Stratix10 and Agilex handoff code   Siew Chin Lim
• [PATCH v1 09/22] arm: socfpga: Add handoff data support for Diamond Mesa   Siew Chin Lim
• [PATCH v1 10/22] drivers: clk: dm: Add clock driver for Diamond Mesa   Siew Chin Lim
• [PATCH v1 11/22] arm: socfpga: dm: Get clock manager base address for Diamond Mesa   Siew Chin Lim
• [PATCH v1 12/22] drivers: clk: dm: Add memory clock driver for Diamond Mesa   Siew Chin Lim
• [PATCH v1 13/22] arm: socfpga: Move Stratix10 and Agilex clock manager common code   Siew Chin Lim
• [PATCH v1 14/22] arm: socfpga: Changed to store QSPI reference clock in kHz   Siew Chin Lim
• [PATCH v1 15/22] arm: socfpga: dm: Add clock manager for Diamond Mesa   Siew Chin Lim
• [PATCH v1 16/22] ddr: altera: dm: Add SDRAM driver for Diamond Mesa   Siew Chin Lim
• [PATCH v1 17/22] arm: socfpga: Move Stratix10 and Agilex SPL common code   Siew Chin Lim
• [PATCH v1 18/22] arm: socfpga: dm: Add SPL for Diamond Mesa   Siew Chin Lim
• [PATCH v1 19/22] board: intel: dm: Add socdk board support for Diamond Mesa   Siew Chin Lim
• [PATCH v1 20/22] arm: dts: dm: Add base dtsi and devkit dts for Diamond Mesa   Siew Chin Lim
• [PATCH v1 21/22] configs: dm: Add Diamond Mesa CONFIGs   Siew Chin Lim
• [PATCH v1 22/22] arm: socfpga: dm: Enable Intel Diamond Mesa bulid   Siew Chin Lim
• [PATCH 1/2] mmc: do not send cmd13 if the parameter 'send_status' is 0 for __mmc_switch   haibo.chen at nxp.com
• [PATCH 2/2] mmc: fsl_esdhc_imx: remove the 1ms delay before sending command   haibo.chen at nxp.com
• [PATCH] timer: mchp-pit64b: add support for pit64b   Claudiu.Beznea at microchip.com
• [PATCH 1/2] arm: rmobile: Add RZ/G2M SoC   Biju Das
• [PATCH] arm64: a37xx: pci: Disable link training when unloading driver   Pali Rohár
• [PATCH] mmc: fsl_esdhc_imx: replace all readl/writel to esdhc_read32/esdhc_write32   Bough Chen
• [PATCH] usb: dwc2: Fix contorl OUT transfer issue   Marek Vasut
• [PATCH] usb: xhci-rcar: Add support for R8A774A1 SoC   Marek Vasut
• [PATCH] usb: xhci: fix event trb handling missed   Marek Vasut
• [PATCH] timer: mchp-pit64b: add support for pit64b   Eugen.Hristev at microchip.com
• [PATCH] arm: rmobile: Use imply for BOARD_EARLY_INIT_F   Biju Das
• [PATCH v2] arm: rmobile: Use imply for BOARD_EARLY_INIT_F   Biju Das
• u-boot leaves watchdog enabled by default   Tom Rini
• [PATCH 1/2] arm: rmobile: Add RZ/G2M SoC   Marek Vasut
• [PATCH] net: ravb: Remove writeext function call   Marek Vasut
• [PATCH] arm: mach-rmobile: Mark the default s_init function as weak   Marek Vasut
• [PATCH] board: renesas: Remove empty s_init function   Marek Vasut
• [PATCH] board: renesas: remove empty board_early_init_f function   Marek Vasut
• [PATCH] board: renesas: draak: Drop CA57 reset   Marek Vasut
• [PATCH v2] arm: rmobile: Use imply for BOARD_EARLY_INIT_F   Marek Vasut
• u-boot leaves watchdog enabled by default   Michael Walle
• [PATCH v3 02/57] x86: acpi: Add base asl files for common x86 devices   Simon Glass
• [PATCH] x86: Drop duplicate declaration of emulator state   Simon Glass
• [PATCH] cfi_flash: Fix devicetree address determination   Simon Glass
• [PATCH v3 02/57] x86: acpi: Add base asl files for common x86 devices   Wolfgang Wallner
• [PATCH v3 02/57] x86: acpi: Add base asl files for common x86 devices   Bin Meng
• [PATCH v2 0/5] powerpc, mpc83xx: add DM_ETH support   Rasmus Villemoes
• u-boot leaves watchdog enabled by default   Tom Rini
• [PATCH v3 02/57] x86: acpi: Add base asl files for common x86 devices   Wolfgang Wallner
• [PATCH v3 02/57] x86: acpi: Add base asl files for common x86 devices   Bin Meng
• [PATCH v3 1/7] phy: generic: add error trace to detect PHY issue in uclass   Tom Rini
• [PATCH v3 2/7] board: sunxi: change trace level for phy errors managed by uclass   Tom Rini
• [PATCH v3 3/7] usb: host: ohci: change trace level for phy errors managed by uclass   Tom Rini
• [PATCH v3 4/7] usb: host: ehci-hcd: change trace level for phy errors managed by uclass   Tom Rini
• [PATCH v3 5/7] ata: dwc-ahci: change trace level for phy errors managed by uclass   Tom Rini
• [PATCH v3 6/7] usb: musb-new: sunxi: change trace level for phy errors managed by uclass   Tom Rini
• [PATCH v3 7/7] arm: meson: change trace level for phy errors managed by uclass   Tom Rini
• [PATCH 1/1] arm: enable DM_RNG on QEMU by default   Tom Rini
• u-boot leaves watchdog enabled by default   Michael Walle
• u-boot leaves watchdog enabled by default   Tom Rini
• [RFC 1/1] doc/build/gcc.rst: required packages for Suse   Matthias Brugger
• [PATCH v3 0/2] Add HopeRun HiHope RZ/G2M board support   Biju Das
• [PATCH v3 1/2] arm: rmobile: Add RZ/G2M SoC   Biju Das
• [PATCH v3 2/2] arm: rmobile: Add HopeRun HiHope RZ/G2M board support   Biju Das
• [PATCH 1/1] examples: make examples customizable   Heinrich Schuchardt
• [PATCH 1/1] examples: make examples customizable   Heinrich Schuchardt
• [RFC 1/1] doc/build/gcc.rst: required packages for Suse   Heinrich Schuchardt
• [PATCH test hooks 1/1] u-boot-hooks: add virtio-rng-pci   Heinrich Schuchardt
• [PATCH test hooks 1/1] u-boot-hooks: add virtio-rng-pci   Stephen Warren
• [PATCH 1/1] arm: enable DM_RNG on QEMU by default   Heinrich Schuchardt
• [PATCH 1/1] examples: make examples customizable   Tom Rini
• [PATCH v4 00/59] dm: Add programatic generation of ACPI tables (part D)   Simon Glass
• [PATCH v4 01/59] x86: acpi: Add cros_ec tables   Simon Glass
• [PATCH v4 02/59] x86: acpi: Add base asl files for common x86 devices   Simon Glass
• [PATCH v4 03/59] x86: acpi: apl: Add asl files for Apollo Lake   Simon Glass
• [PATCH v4 04/59] x86: acpi: Add DPTF asl files   Simon Glass
• [PATCH v4 05/59] x86: apl: Correct PCIE_ECAM_BASE   Simon Glass
• [PATCH v4 06/59] x86: Add a config for the systemagent PCIEX regions size   Simon Glass
• [PATCH v4 07/59] x86: Add a common global NVS structure   Simon Glass
• [PATCH v4 08/59] x86: acpi: Support external GNVS tables   Simon Glass
• [PATCH v4 09/59] x86: acpi: Expand the GNVS   Simon Glass
• [PATCH v4 10/59] x86: coral: Add ACPI tables for coral   Simon Glass
• [PATCH v4 11/59] acpi: Add support for writing a _PRW   Simon Glass
• [PATCH v4 12/59] acpi: Add support for conditions and return values   Simon Glass
• [PATCH v4 13/59] acpi: Support generating a multi-function _DSM for devices   Simon Glass
• [PATCH v4 14/59] dm: acpi: Use correct GPIO polarity type in acpi_dp_add_gpio()   Simon Glass
• [PATCH v4 15/59] x86: link: Allow more space for U-Boot   Simon Glass
• [PATCH v4 16/59] i2c: Add a generic driver to generate ACPI info   Simon Glass
• [PATCH v4 17/59] x86: Add wake sources for the acpi_gpe driver   Simon Glass
• [PATCH v4 18/59] x86: apl: Support writing the IntelGraphicsMem table   Simon Glass
• [PATCH v4 19/59] x86: acpi: Add a common routine to write WiFi info   Simon Glass
• [PATCH v4 20/59] x86: Add some definitions for SMM   Simon Glass
• [PATCH v4 21/59] x86: apl: Add power-management definitions   Simon Glass
• [PATCH v4 22/59] x86: apl: Update iomap for ACPI   Simon Glass
• [PATCH v4 23/59] x86: Add a few common Intel CPU functions   Simon Glass
• [PATCH v4 24/59] x86: acpi: Support generation of the HPET table   Simon Glass
• [PATCH v4 25/59] x86: acpi: Support generation of the DBG2 table   Simon Glass
• [PATCH v4 26/59] acpi: Add support for generating processor tables   Simon Glass
• [PATCH v4 27/59] x86: acpi: Add PCT and PTC tables   Simon Glass
• [PATCH v4 28/59] acpi: Add more support for generating processor tables   Simon Glass
• [PATCH v4 29/59] x86: acpi: Add common Intel ACPI tables   Simon Glass
• [PATCH v4 30/59] x86: Support Atom SoCs using SWSMISCI rather than the SWSCI   Simon Glass
• [PATCH v4 31/59] x86: acpi: Add support for additional Intel tables   Simon Glass
• [PATCH v4 32/59] x86: apl: Allow reading hostbridge base addresses   Simon Glass
• [PATCH v4 33/59] p2sb: Add some definitions used for ACPI   Simon Glass
• [PATCH v4 34/59] x86: apl: Generate required ACPI tables   Simon Glass
• [PATCH v4 35/59] x86: apl: Add support for hostbridge ACPI generation   Simon Glass
• [PATCH v4 36/59] x86: apl: Generate CPU tables   Simon Glass
• [PATCH v4 37/59] x86: apl: Generate ACPI table for LPC   Simon Glass
• [PATCH v4 38/59] x86: apl: Drop unnecessary code in PMC driver   Simon Glass
• [PATCH v4 39/59] tpm: cr50: Add ACPI support   Simon Glass
• [PATCH v4 40/59] x86: fsp: Update the FSP API with the end-firmware method   Simon Glass
• [PATCH v4 41/59] x86: cpu: Report address width from cpu_get_info()   Simon Glass
• [PATCH v4 42/59] x86: Sort the MTRR table   Simon Glass
• [PATCH v4 43/59] x86: Notify the FSP of the 'end firmware' event   Simon Glass
• [PATCH v4 44/59] x86: Correct the assembly guard in e820.h   Simon Glass
• [PATCH v4 45/59] x86: Add a header guard to asm/acpi_table.h   Simon Glass
• [PATCH v4 46/59] x86: Correct handling of MADT table CPUs   Simon Glass
• [PATCH v4 47/59] acpi: tpm: Add a TPM2 table   Simon Glass
• [PATCH v4 48/59] acpi: tpm: Add a TPM1 table   Simon Glass
• [PATCH v4 49/59] x86: acpi: Set the log category for x86 table generation   Simon Glass
• [PATCH v4 50/59] x86: coral: Add audio descriptor files   Simon Glass
• [PATCH v4 51/59] x86: apl: Check low-level init in FSP-S pre-init   Simon Glass
• [PATCH v4 52/59] x86: fsp: Add more debugging for silicon init   Simon Glass
• [PATCH v4 53/59] x86: fsp: Show FSP-S or FSP-M address in fsp_get_header()   Simon Glass
• [PATCH v4 54/59] acpi: Use defines for field lengths   Simon Glass
• [PATCH v4 55/59] x86: Add a way to add to the e820 memory table   Simon Glass
• [PATCH v4 56/59] x86: Move include of bitops out of ACPI region   Simon Glass
• [PATCH v4 57/59] x86: coral: Update config and device tree for ACPI   Simon Glass
• [PATCH v4 58/59] acpi: Add more documentation for struct acpi_gpio   Simon Glass
• [PATCH v4 59/59] acpi: Use I2cSerialBusV2() instead of I2cSerialBus()   Simon Glass
• [PATCH 1/1] examples: make examples customizable   Simon Glass
• Question: Chromebook Flip C100p Uboot build and flash   Simon Glass
• [RFC PATCH] dm: add cells_count parameter in *_count_phandle_with_args   Simon Glass
• [PATCH 1/4] treewide: configs: get rid of unused CONFIG_DEFAULT_CONSOLE   Simon Glass
• [PATCH 2/4] treewide: configs: fold CONFIG_DEFAULT_CONSOLE   Simon Glass
• [PATCH 3/4] Remove whitelist entry CONFIG_DEFAULT_CONSOLE   Simon Glass
• [PATCH 4/4] configs: smdkv310: get rid of unused EXYNOS4_DEFAULT_UART_OFFSET   Simon Glass
• [PATCH 1/2] log: allow for message continuation   Simon Glass
• [PATCH 2/2] test: log: test message continuation   Simon Glass
• [PATCH 2/3] global_data.h: add Sphinx documentation   Simon Glass
• [PATCH 3/3] doc: global data pointer   Simon Glass
• [PATCH 1/1] MAINTAINERS: assign doc/arch/sandbox.rst   Simon Glass
• [PATCH 1/1] doc/arch/sandbox.rst: reformat command line options   Simon Glass
• [PATCH v2 1/3] global_data.h: convert GD_FLG_* to enum   Simon Glass
• [PATCH 1/3] global_data.h: convert GD_FLG_* to enum   Simon Glass
• [PATCH 1/1] examples: make examples customizable   Heinrich Schuchardt
• [PATCH 1/3] global_data.h: convert GD_FLG_* to enum   Heinrich Schuchardt
• [PATCH 1/2] log: allow for message continuation   Heinrich Schuchardt
• [PATCH 1/1] examples: make examples customizable   Tom Rini
• [PATCH v2] configs: powerpc: Don't set CONFIG_ENV_ADDR for QorIQ SPIFLASH   Tom Rini
• [PATCH 1/1] disk: typo Terra Bytes   Tom Rini
• [PATCH] spi: mpc8xxx_spi.c: fix cs activate/deactivate   Tom Rini
• [PATCH 1/1] doc/build/gcc.rst: add missing apt-get *install*   Tom Rini
• [PATCH] gpio/mpc83xx_spisel_boot.c: include log.h   Tom Rini
• [PATCH v2 0/5] x86: Updates to some commands   Simon Glass
• [PATCH v2 1/5] x86: hob: Add way to show a single hob entry   Simon Glass
• [PATCH v2 2/5] x86: hob: Try to show a name instead of a GUID   Simon Glass
• [PATCH v2 3/5] x86: Allow showing details about a HOB entry   Simon Glass
• [PATCH v2 4/5] x86: Add support for more than 8 MTRRs   Simon Glass
• [PATCH v2 5/5] x86: video: Show information about each video device   Simon Glass
• Please pull u-boot-dm/next into 'next'   Simon Glass
• [PATCH 0/5] edison: Support for writing an xFSTK image   Simon Glass
• [PATCH 1/2] log: allow for message continuation   Simon Glass
• [PATCH 3/3] Fix missing __udivdi3 in SquashFS implementation.   Daniel Schwierzeck
• [PATCH 0/3] Patches to allow running u-boot on vocore2 board   Daniel Schwierzeck
• [PATCH 3/3] doc: global data pointer   Daniel Schwierzeck
• [PULL] u-boot-mips fixes for v2020.10   Daniel Schwierzeck
• [PATCH v3 0/5] x86: Updates to some commands   Simon Glass
• [PATCH v3 5/5] x86: video: Show information about each video device   Simon Glass
• [PATCH v2 5/5] x86: video: Show information about each video device   Simon Glass
• [PATCH v2 0/5] powerpc, mpc83xx: add DM_ETH support   Heiko Schocher
• [PATCH v2 0/5] x86: Updates to some commands   Bin Meng
• [PATCH v3 5/5] x86: video: Show information about each video device   Bin Meng
• [PATCH] cfi_flash: Fix devicetree address determination   Stefan Roese
• [PATCH v4 00/59] dm: Add programatic generation of ACPI tables (part D)   Bin Meng
• [PATCH] dm: ofnode: Fix compile breakage with OF_CHECKS enabled   Stefan Roese
• [PATCH] arm64: a37xx: pci: Disable link training when unloading driver   Stefan Roese
• [PATCH 1/2] arm: mvebu: Initial iEi Puzzle-M801 support   Stefan Roese
• [PATCH 2/2] arm: mvebu: mvebu_armada-8k: Add support for initializing iEi Puzzle-M801 networking   Stefan Roese
• [PATCH v2 1/2] spi: call WATCHDOG_RESET() in spi_nor_wait_till_ready_with_timeout()   Rasmus Villemoes
• [PATCH 1/2] dma: Reduce error level when DMA channel type does not exist   Stefan Roese
• [PATCH 2/2] mtd: cfi_mtd: Use DMA for reads   Stefan Roese
• [PATCH] spi: xilinx_spi: Remove unused variable   Michal Simek
• U-Boot issue   Heinrich Schuchardt
• [PATCH 1/4] mmc: octeontx_hsmmc.c: Remove test debug message   Stefan Roese
• [PATCH 2/4] arm: octeontx: Select CLK   Stefan Roese
• [PATCH 3/4] watchdog: octeontx_wdt: Add support for start and stop   Stefan Roese
• [PATCH 4/4] arm: octeontx: Add CMD_WDT   Stefan Roese
• [PATCH] spi: octeon_spi: Use a fixed 100MHz input clock on Octeon TX2   Stefan Roese
• Accessing CSI MIPI and Capture RAW Data From Bootloader   jaymin.dabhi at vivaldi.net
• [PATCH] spi: renesas_rpc_spi: Return -ENOTSUPP if bitlen cannot be handled during xfer   Lad Prabhakar
• [PATCH] MAINTAINERS: add Microchip PIT64B timer   Claudiu Beznea
• [PATCH 0/3] pinctrl: renesas: trivial fixes and enhancements   Lad Prabhakar
• [PATCH 1/3] pinctrl: renesas: Drop unused members from struct sh_pfc_pinctrl   Lad Prabhakar
• [PATCH 2/3] pinctrl: renesas: Make sure the pin type is updated after setting the MUX   Lad Prabhakar
• [PATCH 3/3] pinctrl: renesas: Implement get_pin_muxing() callback   Lad Prabhakar
• [PATCH 0/6] mmc: fsl_esdhc: add ADMA2 support   Michael Walle
• [PATCH 1/6] mmc: fsl_esdhc: simplify 64bit check for SDMA transfers   Michael Walle
• [PATCH 2/6] mmc: fsl_esdhc: use dma-mapping API   Michael Walle
• [PATCH 3/6] mmc: fsl_esdhc: simplify esdhc_setup_data()   Michael Walle
• [PATCH 4/6] mmc: fsl_esdhc: replace most #ifdefs by IS_ENABLED()   Michael Walle
• [PATCH 5/6] mmc: sdhci: move the ADMA2 table handling into own module   Michael Walle
• [PATCH 6/6] mmc: fsl_esdhc: add ADMA2 support   Michael Walle
• [Patch v2] configs: ls1012a/ls1046a: Add CONFIG_ENV_OVERWRITE in defconfig   Kuldeep Singh
• Accessing CSI MIPI and Capture RAW Data From Bootloader   Michael Nazzareno Trimarchi
• [PATCH 1/1] examples: make examples customizable   Matthias Brugger
• [PATCH] serial: zynq: disable TX and RX while changing baud rate   Michal Simek
• [PATCH 0/5] microblaze: Switch to distro boot   Michal Simek
• [PATCH 1/5] microblaze: Enable spi for microblaze   Michal Simek
• [PATCH 2/5] microblaze: trivial code fixes   Michal Simek
• [PATCH 3/5] microblaze: board: Check return value whlie saving env variables   Michal Simek
• [PATCH 4/5] microblaze: Setup distro boot env variables at run time   Michal Simek
• [PATCH 5/5] microblaze: Add support for distro boot   Michal Simek
• [PATCH] xilinx: drivers: Use '_' instead of '-' in driver name   Michal Simek
• [PATCH] net: gem: Add support for more PHYs on MDIO bus   Michal Simek
• [PATCH] env: kconfig: Add default option for ARCH_ZYNQ   Michal Simek
• [PATCH] xilinx: kconfig: Change Kconfig dependencies for Xilinx drivers   Michal Simek
• [PATCH] xilinx: kconfig: Move sourcing of board Kconfig to mach folders   Michal Simek
• [PATCH] board: xilinx: Enable changing default DTB pick up address   Michal Simek
• [PATCH] microblaze: Add support for little/big endian in/out api's   Michal Simek
• [PATCH] configs: xilinx: Enable configs required for ubifs   Michal Simek
• [PATCH v2] serial: uartlite: Add support to work with any endianness   Michal Simek
• [PATCH] xilinx: Enable uartlite driver for Versal/ZynqMP   Michal Simek
• [PATCH] arm64: zynqmp: Add device tree node for 2nd mux on I2C1 bus   Michal Simek
• [PATCH] arm64: zynqmp: Correct value of shunt resistor for VCCINT and VCC_SOC   Michal Simek
• [PATCH 4/9] nand: Kconfig: Change dependency for NAND_ARASAN   Michal Simek
• [PATCH] arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding   Michal Simek
• [PATCH] include: dt-bindings: Add MSCC header   Michal Simek
• [PATCH 0/2] net: xilinx: axi_emac: Add 64bit support   Michal Simek
• [PATCH] xilinx: versal: Enable AXI ethernet driver   Michal Simek
• [PATCH v2 0/3] xilinx: zynqmp: Silicon name cleanup   Michal Simek
• [PATCH] xilinx: zynqmp: Add support for saving variables   Michal Simek
• [PATCH] xilinx: common: Do not save fdt_blob to bss section   Michal Simek
• [PATCH 7/9] ARM: zynqmp: Fix SPL_DM_SPI dependencies   Michal Simek
• [PATCH] arm64: versal: Generate position-independent pre-relocation code   Michal Simek
• [PATCH] fpga: zynqmp: Get rid of ZYNQMP_SIP_SVC* macros   Michal Simek
• [PATCH] fpga: kconfig: Rename SPL_FPGA_SUPPORT to SPL_FPGA   Michal Simek
• [PATCH] fpga: zynqmp: Protect zynqmp_loads() for SPL   Michal Simek
• [PATCH] mmc: zynq: Fix incorrect indentation   Michal Simek
• [PATCH] xilinx: Disable CONFIG_EFI_LOADER_BOUNCE_BUFFER for ZynqMP/Versal   Michal Simek
• [PATCH] spl: Kconfig: Record proper dependency for SPL_ATF   Michal Simek
• [PATCH] xilinx: r5: Disable EFI loader   Michal Simek
• [PATCH] xilinx: r5: Fix MPU setting for R5   Michal Simek
• [PATCH] xilinx: versal: Fix compilation error when !CONFIG_NET   Michal Simek
• [PATCH] cmd: pxe: Add relocation to pxe_sub cmds   Michal Simek
• [PATCH] xilinx: zynqmp-r5: Increase amount of MALLOC space   Michal Simek
• [PATCH] clk: fixed-rate: Enable DM_FLAG_PRE_RELOC flag   Michal Simek
• [PATCH v2 0/5] doc: board: xilinx: Update Xilinx documentation   Michal Simek
• [PATCH v2 1/5] MAINTAINERS: Record documentation for Xilinx platforms   Michal Simek
• [PATCH v2 2/5] doc: board: xilinx: zynq.rst: Update zynq documentation   Michal Simek
• [PATCH v2 3/5] doc: board: xilinx: Update links to DT binding docs   Michal Simek
• [PATCH v2 4/5] doc: board: xilinx: Add documentation for ZynqMP   Michal Simek
• [PATCH v2 5/5] doc: board: xilinx: Add documentation for ZynqMP R5   Michal Simek
• [PATCH] powerpc: reduce number of WATCHDOG_RESET calls from flush_cache   Wolfgang Denk
• Please pull u-boot-dm/next into 'next'   Tom Rini
• [PULL] u-boot-mips fixes for v2020.10   Tom Rini
• pull request of u-boot-mpc85xx for next   Priyanka Jain
• [PATCHv6 01/18] phy: make phy_connect_fixed work with a null mdio bus   Priyanka Jain (OSS)
• [PATCH] configs: powerpc: add usb (host) mass storage support   Priyanka Jain (OSS)
• [PATCH] powerpc: reduce number of WATCHDOG_RESET calls from flush_cache   Priyanka Jain (OSS)
• [PATCHv3 02/36] powerpc: dts: t2080: add espi controller node support   Priyanka Jain (OSS)
• [EXT] Re: [PATCH] rtc: pcf2127: fix uninitialized variable msg   Priyanka Jain (OSS)
• [PATCH v2] armv8: layerscape: don't remove crypto node if just partially disabled   Priyanka Jain (OSS)
• [PATCH 2/2] microblaze: start.S: Use board_init_f_alloc/init in early init   Michal Simek
• [PATCH 1/2] microblaze: start.S: Factor out exception setup code to __setup_exceptions   Michal Simek
• [PATCH] net: e1000: add defaults for i210 TX/RX PBSIZE   Christian Gmeiner
• [RFC PATCH] dm: add cells_count parameter in *_count_phandle_with_args   Patrick DELAUNAY
• [PATCH] cfi_flash: Fix devicetree address determination   André Przywara
• [PATCH 1/2] watchdog: Hide WATCHDOG_RESET_DISABLE   Michael Walle
• [PATCH 2/2] watchdog: add watchdog behavior configuration   Michael Walle
• [PATCH 1/2] video: backlight: Support PWMs without a known period_ns   Alper Nebi Yasak
• [PATCH 2/2] pwm: Add a driver for Chrome OS EC PWM   Alper Nebi Yasak
• [PATCH 2/2] watchdog: add watchdog behavior configuration   Mark Kettenis
• [PATCH v2 1/1] examples: make examples/ optional   Heinrich Schuchardt
• [PATCH] lib: rsa: check algo match in rsa_verify_with_keynode   Matthieu CASTET
• [PATCH 2/2] watchdog: add watchdog behavior configuration   Tom Rini
• [PATCH 2/2] watchdog: add watchdog behavior configuration   Heinrich Schuchardt
• [PATCH 2/2] watchdog: add watchdog behavior configuration   Tom Rini
• [PATCH 2/2] watchdog: add watchdog behavior configuration   Heinrich Schuchardt
• [PATCH] ARM: zynq: Add Z-turn board V5   agriveaux at deutnet.info
• [PATCH 2/2] watchdog: add watchdog behavior configuration   Tom Rini
• [PATCH 2/2] watchdog: add watchdog behavior configuration   Mark Kettenis
• [PATCH] Convert CONFIG_WATCHDOG et al to Kconfig   Tom Rini
• [PATCH 3/3] Fix missing __udivdi3 in SquashFS implementation.   Mauro Condarelli
• [PATCH] Convert CONFIG_WATCHDOG et al to Kconfig   Jack Mitchell
• [PATCH 3/3] Fix missing __udivdi3 in SquashFS implementation.   Tom Rini
• [PATCH] Convert CONFIG_WATCHDOG et al to Kconfig   Tom Rini
• [PATCH 2/2] watchdog: add watchdog behavior configuration   Heinrich Schuchardt
• [PATCH 2/2] watchdog: add watchdog behavior configuration   Tom Rini
• [PATCH 1/1] fs/squashfs: parameter check sqfs_read_metablock()   Heinrich Schuchardt
• [PATCH 1/1] fs/squashfs: parameter check sqfs_read_metablock()   Thomas Petazzoni
• [PATCH 2/2] watchdog: add watchdog behavior configuration   Heinrich Schuchardt
• [PATCH 2/2] watchdog: add watchdog behavior configuration   Tom Rini
• [PATCH 1/1] fs/squashfs: parameter check sqfs_read_metablock()   Heinrich Schuchardt
• [PATCH 2/2] watchdog: add watchdog behavior configuration   Michael Walle
• [PATCH 2/2] watchdog: add watchdog behavior configuration   Heinrich Schuchardt
• [PATCH 2/2] watchdog: add watchdog behavior configuration   Heinrich Schuchardt
• [PATCH 2/2] watchdog: add watchdog behavior configuration   Tom Rini
• [PATCH] distro_bootcmd: call EFI bootmgr even without having /EFI/boot   Michael Walle
• [PATCH] distro_bootcmd: call EFI bootmgr even without having /EFI/boot   Heinrich Schuchardt
• [PATCH 3/3] Fix missing __udivdi3 in SquashFS implementation.   Daniel Schwierzeck
• [PATCH] arm64: a37xx: pci: Disable link training when unloading driver   Pali Rohár
• [PATCH v2] cfi_flash: Fix devicetree address determination   Andre Przywara
• [PATCH 0/5] qemu-arm64: Allow booting via Trusted Firmware   Andre Przywara
• [PATCH 1/5] arm64: PIE: Skip fixups if distance is zero   Andre Przywara
• [PATCH 2/5] arm64: PIE: Allow fixed stack pointer   Andre Przywara
• [PATCH 3/5] qemu-arm: Remove need to specify flash banks   Andre Przywara
• [PATCH 4/5] qemu: Drop ARCH_SUPPORT_TFABOOT   Andre Przywara
• [PATCH 5/5] qemu-arm64: Enable POSITION_INDEPENDENT   Andre Przywara
• [PATCH v3 1/3] net: cortina_ni: Add eth support for Cortina Access CAxxxx SoCs   Alex Nemirovsky
• [PATCH v3 2/3] net: phy: ca_phy: Add driver for CAxxxx SoCs   Alex Nemirovsky
• [PATCH v3 3/3] board: presidio-asic: Add CAxxxx Ethernet support   Alex Nemirovsky
• [PATCH v2 1/3] net: cortina_ni: Add eth support for Cortina Access CAxxxx SoCs   Alex Nemirovsky
• [PATCH 0/5] edison: Support for writing an xFSTK image   Bin Meng
• [PATCH 0/5] edison: Support for writing an xFSTK image   Bin Meng
• [PATCH v3 0/9] regmap: Add managed API, regmap fields, regmap config   Pratyush Yadav
• [PATCH v3 1/9] regmap: Add devm_regmap_init()   Pratyush Yadav
• [PATCH v3 2/9] regmap: zero out the regmap on allocation   Pratyush Yadav
• [PATCH v3 3/9] regmap: Allow specifying read/write width   Pratyush Yadav
• [PATCH v3 4/9] regmap: Allow left shifting register offset before access   Pratyush Yadav
• [PATCH v3 5/9] regmap: Add regmap_init_mem_range()   Pratyush Yadav
• [PATCH v3 6/9] regmap: Allow devices to specify regmap range start and size in config   Pratyush Yadav
• [PATCH v3 7/9] regmap: Add support for regmap fields   Pratyush Yadav
• [PATCH v3 8/9] test/py: allow multi-digit index in in_tree()   Pratyush Yadav
• [PATCH v3 9/9] test: dm: Add tests for regmap managed API and regmap fields   Pratyush Yadav
• [PATCHv6 01/18] phy: make phy_connect_fixed work with a null mdio bus   Z.q. Hou
• [PATCH v2] cfi_flash: Fix devicetree address determination   Stefan Roese
• [PATCH 2/2] watchdog: add watchdog behavior configuration   Michael Walle
• [PATCH v2 0/5] powerpc, mpc83xx: add DM_ETH support   Rasmus Villemoes
• [PATCH] README: Fix typo in Board Initialisation Flow   Naoki Hayama
• [PATCH v2 0/5] powerpc, mpc83xx: add DM_ETH support   Heiko Schocher
• [PATCH 2/2] watchdog: add watchdog behavior configuration   Michael Walle
• [PATCH] mtd: spi-nor: Add support for Cypress s25hl-t/s25hs-t   tkuw584924 at gmail.com
• [PATCH 0/5] qemu-arm64: Allow booting via Trusted Firmware   Amit Tomar
• [PATCH RESEND] watchdog: Hide WATCHDOG_RESET_DISABLE   Michael Walle
• [PATCH 2/2] watchdog: add watchdog behavior configuration   Mark Kettenis
• [PATCH 2/2] watchdog: add watchdog behavior configuration   Michael Walle
• [PATCH 0/5] qemu-arm64: Allow booting via Trusted Firmware   André Przywara
• [PATCH 0/5] qemu-arm64: Allow booting via Trusted Firmware   Heinrich Schuchardt
• [PATCH 0/5] qemu-arm64: Allow booting via Trusted Firmware   Ard Biesheuvel
• [PATCH] ARM: zynq: Add Z-turn board V5   Michal Simek
• [PATCH v2 1/2] microblaze: start.S: Factor out exception setup code to __setup_exceptions   Ovidiu Panait
• [PATCH v2 2/2] microblaze: start.S: Use board_init_f_alloc/init in early init   Ovidiu Panait
• [PATCH 0/5] qemu-arm64: Allow booting via Trusted Firmware   Amit Tomar
• [PATCH 0/5] qemu-arm64: Allow booting via Trusted Firmware   Amit Tomar
• [PATCH 0/5] qemu-arm64: Allow booting via Trusted Firmware   André Przywara
• [PATCH 2/2] watchdog: add watchdog behavior configuration   Mark Kettenis
• [PATCH] mtd: spi-nor-ids: add support for Macronix mx25u12835f flash   Stefan Roese
• [PATCH] arm64: a37xx: increase CONFIG_SYS_BOOTM_LEN to 64MB   Stefan Roese
• [PATCH] defconfig: espressobin: enable NET_RANDOM_ETHADDR   Stefan Roese
• [PATCH] ARM: mvebu: clearfog: don't override set fdtfile env   Stefan Roese
• [PATCH v2] arm: mvebu: Espressobin: Set environment variable fdtfile   Stefan Roese
• [PATCH] dns325: Correct CONFIG_NR_DRAM_BANKS parameter   Stefan Roese
• [PATCH] arm64: a37xx: pci: Disable link training when unloading driver   Stefan Roese
• Please pull u-boot-marvell/master   Stefan Roese
• [GIT PULL] xilinx patches for v2021.01   Michal Simek
• [PATCH 2/2] env: add CONFIG_ENV_SECT_SIZE_AUTO   Wolfgang Denk
• [PATCH] powerpc: reduce number of WATCHDOG_RESET calls from flush_cache   Wolfgang Denk
• [PATCH 2/2] env: add CONFIG_ENV_SECT_SIZE_AUTO   Rasmus Villemoes
• armv7R: K3: am654: U-Boot   Michal Simek
• [PATCH 2/2] env: add CONFIG_ENV_SECT_SIZE_AUTO   Mike Looijmans
• [PATCH 2/2] env: add CONFIG_ENV_SECT_SIZE_AUTO   Rasmus Villemoes
• [PATCH v2 1/1] examples: make examples/ optional   Tom Rini
• [PATCH] powerpc: reduce number of WATCHDOG_RESET calls from flush_cache   Tom Rini
• [PATCH] powerpc: reduce number of WATCHDOG_RESET calls from flush_cache   Tom Rini
• pull request of u-boot-mpc85xx for next   Tom Rini
• [PATCH 2/2] watchdog: add watchdog behavior configuration   Tom Rini
• [V3] gpio: mpc8xxx: support fsl-layerscape platform   Hui Song
• [PATCH 6/8] sunxi: board: Set fdtfile to match the DT chosen by SPL   Andre Przywara
• [PATCH v2 1/2] microblaze: start.S: Factor out exception setup code to __setup_exceptions   Michal Simek
• [PATCH v2 2/2] microblaze: start.S: Use board_init_f_alloc/init in early init   Michal Simek
• U-Boot page tables   Branden Sherrell
• [PATCH 1/5] arm64: PIE: Skip fixups if distance is zero   André Przywara
• [PATCH 1/5] arm64: PIE: Skip fixups if distance is zero   Ard Biesheuvel
• [PATCH v2 11/12] pci: layerscape: Add size check for config resource   Priyanka Jain (OSS)
• [PATCH] dm: update test on of_offset in ofnode_valid   Patrick Delaunay
• [PATCH v2 1/1] examples: make examples/ optional   Simon Glass
• [PATCH 1/2] video: backlight: Support PWMs without a known period_ns   Simon Glass
• [PATCH 2/2] pwm: Add a driver for Chrome OS EC PWM   Simon Glass
• [PATCH] cfi_flash: Fix devicetree address determination   Simon Glass
• [RFC PATCH] dm: add cells_count parameter in *_count_phandle_with_args   Simon Glass
• Netgear RN102 U-Boot Nand Driver Modification   Abdus Rainey
• [PATCH] dm: update test on of_offset in ofnode_valid   Simon Glass
• [PATCH] dm: ofnode: Fix compile breakage with OF_CHECKS enabled   Simon Glass
• [PATCH 1/5] arm64: PIE: Skip fixups if distance is zero   Stephen Warren
• [PATCH 5/5] qemu-arm64: Enable POSITION_INDEPENDENT   Stephen Warren
• [PATCH 2/2] watchdog: add watchdog behavior configuration   Michael Walle
• What is the status of IMX8MM USB support?   Tim Harvey
• [PATCH 2/2] watchdog: add watchdog behavior configuration   Mark Kettenis
• [PATCH 2/2] watchdog: add watchdog behavior configuration   Michael Walle
• [PATCH 2/2] watchdog: add watchdog behavior configuration   Michael Walle
• Quick question?   jchludzinski
• Quick question?   jchludzinski
• [PATCH] Revert "mmc: disable UHS modes if Vcc cannot be switched on and off"   Pali Rohár
• Using u-boot as arm64 uefi payload   Qu Wenruo
• [PATCH 0/5] edison: Support for writing an xFSTK image   Simon Glass
• [PATCH 2/2] watchdog: add watchdog behavior configuration   Tom Rini
• [PATCH 1/2] x86: Fix-up patch for showing video information   Simon Glass
• [PATCH 2/2] x86: Fixup for using multiple images   Simon Glass
• [PATCH 1/2] x86: Fix-up patch for showing video information   Bin Meng
• [PATCH 2/2] x86: Fixup for using multiple images   Bin Meng
• Please pull u-boot-x86/next into next   Bin Meng
• What is the status of IMX8MM USB support?   Peng Fan
• [PATCH 1/2] ram: sifive: Check return value on clk_enable()   Bin Meng
• [PATCH 1/2] ram: sifive: Check return value on clk_enable()   Rick Chen
• [BUG] SPI_LSB_FIRST ignored in most SPI drivers   Ulf Samuelsson
• [PATCH] rng: meson: make core clock optional   Neil Armstrong
• [PATCH 1/3] dm: add cells_count parameter in *_count_phandle_with_args   Patrick Delaunay
• [PATCH 2/3] fdtdec: correct test on return of fdt_node_offset_by_phandle   Patrick Delaunay
• [PATCH 3/3] test: dm: add test for phandle access functions   Patrick Delaunay
• [PATCH v1 09/16] mmc: dwmmc: socfpga: Add ATF support for MMC driver   Tan, Ley Foon
• [PATCH v2 1/6] ARM: mach-at91: add support for new SoC sama7g5   Eugen.Hristev at microchip.com
• [PATCH v1 13/16] arm: socfpga: mailbox: Add 'SYSTEM_RESET' PSCI support to mbox_reset_cold()   Tan, Ley Foon
• [PATCH v2] arm: mvebu: Espressobin: Set environment variable fdtfile   Pali Rohár
• [PATCH] arm: mvebu: Espressobin: Instructions for more MAC addresses in README.marvell   Pali Rohár
• [PATCH v1 10/16] net: designware: socfpga: Add ATF support for MAC driver   Tan, Ley Foon
• [PATCH v1 14/16] arm: socfpga: soc64: SSBL shall not setup stack on OCRAM   Tan, Ley Foon
• [PATCH 2/2] watchdog: add watchdog behavior configuration   Wolfgang Denk
• [PATCH v1 16/16] configs: socfpga: Add defconfig for Agilex and Stratix 10 with ATF support   Tan, Ley Foon
• [PATCH 1/5] arm64: PIE: Skip fixups if distance is zero   André Przywara
• [PATCH v1 08/16] arm: socfpga: soc64: Define SMC function identifiers for PSCI SiP services   Tan, Ley Foon
• [PATCH] distro_bootcmd: call EFI bootmgr even without having /EFI/boot   Michael Walle
• [PATCH] mtd: spi-nor: Add support for Cypress s25hl-t/s25hs-t   Pratyush Yadav
• [PATCH] mtd: spi-nor: Add support for Cypress s25hl-t/s25hs-t   Pratyush Yadav
• [PATCH v2 1/1] examples: make examples/ optional   Matthias Brugger
• Quick question?   Rayagonda Kokatanur
• [PATCH 0/3] add "call" command   Rasmus Villemoes
• [PATCH 1/3] cli_hush.c: refactor handle_dollar() to prepare for cmd_call   Rasmus Villemoes
• [PATCH 2/3] cli_hush.c: add "call" command   Rasmus Villemoes
• [PATCH 3/3] ut: add small hush tests   Rasmus Villemoes
• [PATCH 2/2] watchdog: add watchdog behavior configuration   Heinrich Schuchardt
• [PATCH v8 0/2] Basic Kontron SMARC-sAL28 board support   Michael Walle
• [PATCH v8 1/2] board: kontron: add sl28 support   Michael Walle
• [PATCH v8 2/2] board: sl28: add board specific nvm command   Michael Walle
• [PATCH 0/3] add "call" command   Heinrich Schuchardt
• [PATCH 0/3] add "call" command   Rasmus Villemoes
• [PATCH 0/3] add "call" command   Wolfgang Denk
• [PATCH 2/2] watchdog: add watchdog behavior configuration   Tom Rini
• [PATCH 1/3] cli_hush.c: refactor handle_dollar() to prepare for cmd_call   Wolfgang Denk
• [PATCH 2/2] watchdog: add watchdog behavior configuration   Wolfgang Denk
• [PATCH 0/3] add "call" command   Wolfgang Denk
• [PATCH 2/3] cli_hush.c: add "call" command   Rasmus Villemoes
• [PATCH 2/2] watchdog: add watchdog behavior configuration   Heinrich Schuchardt
• [PATCH 0/3] add "call" command   Rasmus Villemoes
• [PATCH 0/3] add "call" command   Heinrich Schuchardt
• [PATCH 0/3] add "call" command   Rasmus Villemoes
• Help Request: booting freeze on rk3368 board   yanghb
• armv7R: K3: am654: U-Boot   Lokesh Vutla
• [PATCH 0/3] add "call" command   Simon Glass
• IMX8MM 4GiB boundary issue   Tim Harvey
• IMX8MM 4GiB boundary issue   Marek Vasut
• [PATCH] cpu: at91: add driver for CPU   Claudiu Beznea
• [PATCH] imx8m: fix cache setup for dynamic sdram size   Tim Harvey
• IMX8MM 4GiB boundary issue   Tim Harvey
• [PATCH 1/3] arm: Implement show_boot_progress() for imx53's HSC and DDC devices   Lukasz Majewski
• [PATCH 2/3] dts: Provide LED DTS description for HSC and DDC imx53 devices   Lukasz Majewski
• [PATCH 3/3] defconfig: Enable CONFIG_SHOW_BOOT_PROGRESS for imx53's HSC and DDC devices   Lukasz Majewski
• [PATCH 1/2] video: backlight: Support PWMs without a known period_ns   Alper Nebi Yasak
• Quick question?   jchludzinski
• [PATCH 2/2] pwm: Add a driver for Chrome OS EC PWM   Alper Nebi Yasak
• Quick question?   Rayagonda Kokatanur
• [PATCH 0/3] Add Clock and Pincontrol driver support for RZ/G2N SoC   Biju Das
• [PATCH 1/3] arm: renesas: Add config option for R8A774B1 SoC   Biju Das
• [PATCH 2/3] clk: renesas: Add R8A774B1 clock tables   Biju Das
• [PATCH 3/3] pinctrl: renesas: r8a77965: Add R8A774B1 PFC support   Biju Das
• Quick question?   jchludzinski
• pull request of u-boot-fsl-qoriq for v2020.10   Priyanka Jain
• [GIT PULL] xilinx patches for v2021.01   Tom Rini
• Please pull u-boot-marvell/master   Tom Rini
• Please pull u-boot-x86/next into next   Tom Rini
• [PATCH 1/1] efi_loader: installation of EFI_RNG_PROTOCOL   Heinrich Schuchardt
• [PATCH 0/3] Add Clock and Pincontrol driver support for RZ/G2H SoC   Biju Das
• [PATCH 1/3] arm: renesas: Add config option for R8A774E1 SoC   Biju Das
• [PATCH 2/3] clk: renesas: Add R8A774E1 clock tables   Biju Das
• [PATCH 3/3] pinctrl: renesas: r8a77951: Add R8A774E1 PFC support   Biju Das
• IMX8MM 4GiB boundary issue   Marek Vasut
• [PATCH] Kconfig: Use hex values for CONFIG_{SPL,TPL}_SIZE_LIMIT   Ovidiu Panait
• [PATCH v2 1/1] efi_loader: installation of EFI_RNG_PROTOCOL   Heinrich Schuchardt
• [patch 0/8] RFC: Pinebook pro EDP support   Arnaud Patard (Rtp)
• [patch 1/8] RFC: drivers/video/rockchip/rk_vop.c: Use endpoint compatible string to find VOP mode   Arnaud Patard (Rtp)
• [patch 2/8] RFC: drivers/video/rockchip/rk_edp.c: Add rk3399 support   Arnaud Patard (Rtp)
• [patch 3/8] RFC: drivers/video/rockchip/rk_edp.c: Change interrupt polarity configuration   Arnaud Patard (Rtp)
• [patch 4/8] RFC: drivers/video/rockchip/rk_edp.c: Change clock rate   Arnaud Patard (Rtp)
• [patch 5/8] RFC: drivers/video/rockchip/rk_vop.c: Reserve efi fb memory   Arnaud Patard (Rtp)
• [patch 6/8] RFC: rk3399-pinebook-pro-u-boot.dtsi: Enable edp   Arnaud Patard (Rtp)
• [patch 7/8] RFC: configs/pinebook-pro-rk3399_defconfig: enable SYS_USB_EVENT_POLL_VIA_INT_QUEUE   Arnaud Patard (Rtp)
• [patch 8/8] RFC: drivers/pwm/rk_pwm.c: Fix default polarity   Arnaud Patard (Rtp)
• [PATCH] rng: meson: make core clock optional   Scott K Logan
• [PATCH v2 1/1] efi_loader: installation of EFI_RNG_PROTOCOL   Scott K Logan
• [PATCH 1/1] riscv: restore global data pointer in trap handler   Heinrich Schuchardt
• [PATCH 1/1] riscv: reset after crash   Heinrich Schuchardt
• [PATCH 2/3] cli_hush.c: add "call" command   Wolfgang Denk
• [PATCH 2/2] watchdog: add watchdog behavior configuration   Wolfgang Denk
• [PATCH 0/3] add "call" command   Wolfgang Denk
• [PATCH 0/3] add "call" command   Wolfgang Denk
• [PATCH v2] arm: mvebu: Espressobin: Set environment variable fdtfile   Andre Heider
• [PATCH] arm: mvebu: Espressobin: Instructions for more MAC addresses in README.marvell   Andre Heider
• [PATCH] arm: mvebu: Espressobin: Instructions for more MAC addresses in README.marvell   Pali Rohár
• [PATCH] arm: mvebu: Espressobin: Instructions for more MAC addresses in README.marvell   Andre Heider
• [PATCH] arm: mvebu: Espressobin: Instructions for more MAC addresses in README.marvell   Pali Rohár
• [PATCH] arm: mvebu: Espressobin: Instructions for more MAC addresses in README.marvell   Andre Heider
• [PATCH 0/3] add "call" command   Heinrich Schuchardt
• [PATCH 2/2] watchdog: add watchdog behavior configuration   Mark Kettenis
• [PATCH V2] net: smc911x: Automatically Update ethaddr with MAC   Adam Ford
• [PATCH 2/2] watchdog: add watchdog behavior configuration   Heinrich Schuchardt
• [PATCH 2/2] watchdog: add watchdog behavior configuration   Tom Rini
• [PATCH 0/3] add "call" command   Wolfgang Denk
• [PATCH 0/3] add "call" command   Wolfgang Denk
• [PATCH 2/2] watchdog: add watchdog behavior configuration   Wolfgang Denk
• [PATCH 2/2] watchdog: add watchdog behavior configuration   Wolfgang Denk
• [PATCH 1/1] riscv: reset after crash   Sean Anderson
• [PATCH v2 1/2] video: backlight: Support PWMs without a known period_ns   Alper Nebi Yasak
• [PATCH v2 2/2] pwm: Add a driver for Chrome OS EC PWM   Alper Nebi Yasak
• [PATCH 1/1] riscv: reset after crash   Heinrich Schuchardt
• [PATCH v2 1/1] riscv: reset after crash   Heinrich Schuchardt
• IMX8MM 4GiB boundary issue   Peng Fan
• IMX8MM 4GiB boundary issue   Marek Vasut
• [PATCH 1/1] log: mute messages generated by log drivers   Simon Glass
• [PATCH] dm: add cells_count parameter in live DT APIs of_parse_phandle_with_args   Simon Glass
• [PATCH v4 3/3] optee: add property no-map to secure reserved memory   Simon Glass
• [PATCH v4 2/3] test: fdtdec: Add test for new no-map fdtdec_add_reserved_memory() parameter   Simon Glass
• [PATCH v4 1/3] fdtdec: optionally add property no-map to created reserved memory node   Simon Glass
• [PATCH v4 2/3] binman: Support help messages for missing blobs   Simon Glass
• [PATCH v4 1/3] binman: Allow selecting default FIT configuration   Simon Glass
• [PATCH v2 4/4] binman: Document how CROSS_COMPILE, CC, HOSTCC etc. are used in README   Simon Glass
• [PATCH v2 3/4] binman: Allow resolving host-specific tools from env vars   Simon Glass
• [PATCH v2 2/4] binman: Use target-specific tools when cross-compiling   Simon Glass
• [PATCH v2 1/4] binman: Support cross-compiling test files to x86   Simon Glass
• [PATCH 1/1] dm: syscon: typo alerady   Simon Glass
• IMX8MM 4GiB boundary issue   Peng Fan
• [PATCH 13/13] usb: ehci-mx6: Improve the bind function   Peng Fan
• [PATCHv2] pci: layerscape: Fixup PCIe EP mode DT nodes for LX2160A rev2   Zhiqiang Hou
• [PATCH v2 2/2] pwm: Add a driver for Chrome OS EC PWM   Peter Robinson
• [PATCH v2 1/1] riscv: restore global data pointer in trap handler   Heinrich Schuchardt
• [PATCH v2 1/1] riscv: restore global data pointer in trap handler   Bin Meng
• [PATCH v2 1/1] riscv: restore global data pointer in trap handler   Heinrich Schuchardt
• [PATCH v2 1/1] riscv: restore global data pointer in trap handler   Bin Meng
• [PATCH v2 2/2] pwm: Add a driver for Chrome OS EC PWM   Arnaud Patard (Rtp)
• [PATCH v2 1/1] riscv: restore global data pointer in trap handler   Heinrich Schuchardt
• [PATCH v3 0/3] doc: global data pointer   Heinrich Schuchardt
• [PATCH v3 1/3] global_data.h: convert GD_FLG_* to enum   Heinrich Schuchardt
• [PATCH v3 2/3] global_data.h: add Sphinx documentation   Heinrich Schuchardt
• [PATCH v3 3/3] doc: global data pointer   Heinrich Schuchardt
• [PATCH 1/1] efi_loader: efidebug display RNG protocol   Heinrich Schuchardt
• i386: GDT, global data pointer   Heinrich Schuchardt
• [PATCH 13/13] usb: ehci-mx6: Improve the bind function   Marek Vasut
• IMX8MM 4GiB boundary issue   Marek Vasut
• [PATCH 0/4] x86: Updates to SMBIOS   Simon Glass
• [PATCH 1/4] x86: Pass an ofnode into each SMBIOS function   Simon Glass
• [PATCH 2/4] smbios: Allow properties to come from the device tree   Simon Glass
• [PATCH 3/4] smbios: Add more properties   Simon Glass
• [PATCH 4/4] smbios: Add documentation and devicetree binding   Simon Glass
• [PATCH v2 2/2] pwm: Add a driver for Chrome OS EC PWM   Alper Nebi Yasak
• [patch 0/8] RFC: Pinebook pro EDP support   Alper Nebi Yasak
• [PATCH v2] log: Allow LOG_DEBUG to always enable log output   Simon Glass
• [PATCH v2] log: Allow LOG_DEBUG to always enable log output   Simon Glass
• [PATCH 2/2] watchdog: add watchdog behavior configuration   Michael Walle
• SPI bus not probed   Michal Suchánek
• [PATCH 00/12] Various minor patches   Simon Glass
• [PATCH 01/12] log: Add missing category names   Simon Glass
• [PATCH 02/12] x86: zimage: Add a little more logging   Simon Glass
• [PATCH 03/12] x86: zimage: Sanity-check the kernel version before printing it   Simon Glass
• [PATCH 04/12] x86: zimage: Quieten down the zimage boot process   Simon Glass
• [PATCH 05/12] syscon: Drop the logging in syscon_get_by_driver_data()   Simon Glass
• [PATCH 06/12] bloblist: Place on a 4KB boundary   Simon Glass
• [PATCH 07/12] binman: Add a way to read the ROM offset   Simon Glass
• [PATCH 08/12] binman: Support multiple images in the library   Simon Glass
• [PATCH 09/12] log: Fix the comment for struct log_driver()   Simon Glass
• [PATCH 10/12] board: Show memory for frame buffers   Simon Glass
• [PATCH 11/12] i2c: designware: Use log_debug() for debugging   Simon Glass
• [PATCH 12/12] tpm: cr50: Correct logging statements   Simon Glass
• [PATCH 01/12] log: Add missing category names   Heinrich Schuchardt
• [PATCH 09/12] log: Fix the comment for struct log_driver()   Heinrich Schuchardt
• [PATCH next v7 00/10] Add support MediaTek USB3 DRD driver   Chunfeng Yun
• [PATCH] clk: rockchip: rk3399: implement getting wdt/alive clocks   Kever Yang
• [PATCH 1/2] rockchip: dts: tinker: move i2c node to shared device tree   Kever Yang
• [PATCH 2/2] rockchip: dts: tinker: remove unnecessary node   Kever Yang
• [PATCH next v7 00/10] Add support MediaTek USB3 DRD driver   Marek Vasut
• [PATCH next v7 00/10] Add support MediaTek USB3 DRD driver   Chunfeng Yun
• [PATCH v2 0/7] rockchip: Add Engicam PX30.Core support   Kever Yang
• [PATCH v2 27/46] phy: rockchip: Fix not calling dev_err with a device   Kever Yang
• [patch 1/8] RFC: drivers/video/rockchip/rk_vop.c: Use endpoint compatible string to find VOP mode   Kever Yang
• [PATCH v5 2/9] timer: Add helper for drivers using timebase fallback   Rick Chen
• [PATCH 11/12] i2c: designware: Use log_debug() for debugging   Heiko Schocher
• [PATCH] Kconfig: Use hex values for CONFIG_{SPL,TPL}_SIZE_LIMIT   Simon Glass
• [PATCH] log: Allow LOG_DEBUG to always enable log output   Simon Glass
• [PATCH v4 8/9] binman: Add support for SCP firmware   Simon Glass
• chromebook_coral.dts: multiple FSP-S entries for same parameters   Simon Glass
• [BUG] sandbox: './u-boot -l ' fails   Simon Glass
• [PATCH v2 1/2] video: backlight: Support PWMs without a known period_ns   Simon Glass
• [PATCH v2 2/2] pwm: Add a driver for Chrome OS EC PWM   Simon Glass
• [PATCH v3 3/3] doc: global data pointer   Simon Glass
• [PATCH 00/32] x86: Allow Coral to boot into Chrome OS   Simon Glass
• [PATCH 01/32] Add an assembly guard around linux/bitops.h   Simon Glass
• [PATCH 02/32] x86: apl: Add core init for the SoC   Simon Glass
• [PATCH 03/32] x86: Add a layout for Chrome OS verified boot   Simon Glass
• [PATCH 04/32] x86: Add support for private files   Simon Glass
• [PATCH 05/32] x86: Allow writing tables to fail   Simon Glass
• [PATCH 06/32] x86: acpi: Store the ACPI context in global_data   Simon Glass
• [PATCH 07/32] x86: Store the FADT so we can avoid searching for it   Simon Glass
• [PATCH 08/32] x86: Don't bother clearing global NVS   Simon Glass
• [PATCH 09/32] x86: coral: Drop the duplicate PCIe settings   Simon Glass
• [PATCH 10/32] x86: Add SMBIOS info for Coral   Simon Glass
• [PATCH 11/32] x86: coral: Correct max98357 file   Simon Glass
• [PATCH 12/32] x86: Move ROM_TABLE_ADDR into the C file   Simon Glass
• [PATCH 13/32] x86: Use if instead of #ifdef in write_tables()   Simon Glass
• [PATCH 14/32] x86: Allow putting some tables in the bloblist   Simon Glass
• [PATCH 15/32] x86: nhlt: Correct output of bytes and 16-bit data   Simon Glass
• [PATCH 16/32] x86: nhlt: Fix a few bugs in the table generation   Simon Glass
• [PATCH 17/32] x86: Show the interrupt pointer with 'irqinfo'   Simon Glass
• [PATCH 18/32] x86: sound: Correct error handling   Simon Glass
• [PATCH 19/32] acpi: Correct reset handling in acpi_device_add_power_res()   Simon Glass
• [PATCH 20/32] x86: acpi: Allow the SSDT to be empty   Simon Glass
• [PATCH 21/32] x86: acpi: Put the generated code first in DSDT   Simon Glass
• [PATCH 22/32] acpi: Don't reset the tables with every new generation   Simon Glass
• [PATCH 23/32] x86: Define the Chrome OS GNVS region   Simon Glass
• [PATCH 24/32] x86: Use CONFIG_CHROMEOS_VBOOT for verified boot   Simon Glass
• [PATCH 25/32] x86: Set up Chrome OS to boot into developer mode   Simon Glass
• [PATCH 26/32] x86: Boot coral into Chrome OS by default   Simon Glass
• [PATCH 27/32] x86: fsp: Convert fsp_dram to use log_debug()   Simon Glass
• [PATCH 28/32] x86: Silence some logging statements   Simon Glass
• [PATCH 29/32] x86: acpi: Include the TPMv1 table only if needed   Simon Glass
• [PATCH 30/32] x86: acpi: Don't show the UART address by default   Simon Glass
• [PATCH 31/32] x86: pinctrl: Silence the warning when a pin is not found   Simon Glass
• [PATCH 32/32] x86: fsp: Adjust calculations for MTRR range and DRAM top   Simon Glass
• [BUG] sandbox: './u-boot -l ' fails   Heinrich Schuchardt
• [PATCH 05/32] x86: Allow writing tables to fail   Heinrich Schuchardt
• [patch 0/8] RFC: Pinebook pro EDP support   Arnaud Patard (Rtp)
• [PATCH] mtd: spi-nor: Add support for Cypress s25hl-t/s25hs-t   Kuwano Takahiro
• [PATCH] mtd: spi-nor: Add support for Cypress s25hl-t/s25hs-t   Kuwano Takahiro
• [PATCH] rng: meson: make core clock optional   Neil Armstrong
• [PATCH] board: s400: generate unique mac address from SoC serial   Neil Armstrong
• [PATCH v2 0/4] amlogic: vim3: add support for dynamic PCIe enable   Neil Armstrong
• [PATCH 0/8] ARM: mach-meson: update & rework USB for GXL, GXM & AXG   Neil Armstrong
• [PATCH v2 1/1] riscv: restore global data pointer in trap handler   Rick Chen
• SPI bus not probed   Michal Suchánek
• U-Boot issue   Matthias Brugger
• [PATCH v2 1/1] riscv: restore global data pointer in trap handler   Heinrich Schuchardt
• [PATCH 1/3] configs: migrate CONFIG_VIDEO_BMP_GZIP to defconfigs   Patrick Delaunay
• [PATCH 2/3] configs: migrate CONFIG_VIDEO_BMP_RLE8 to defconfigs   Patrick Delaunay
• [PATCH 3/3] configs: migrate CONFIG_BMP_16/24/32BPP to defconfigs   Patrick Delaunay
• [PULL u-boot] Please pull u-boot-amlogic-20200928   Neil Armstrong
• Pull request for UEFI sub-system for efi-2020-10-rc6   Heinrich Schuchardt
• [PATCH v2 00/12] Add label to pcie nodes   Wasim Khan
• [PATCH v2 01/12] configs: lx2160a: Enable CONFIG_PCIE_LAYERSCAPE_GEN4   Wasim Khan
• [PATCH v2 02/12] pci: layerscape: Print pcie controller number starting from 1   Wasim Khan
• [PATCH v2 03/12] pci: ls_pcie_g4: Print pcie controller number starting from 1   Wasim Khan
• [PATCH v2 04/12] arm: dts: lx2160a: add label to pcie nodes in dts   Wasim Khan
• [PATCH v2 05/12] arm: dts: ls1046a: add label to pcie nodes in dts   Wasim Khan
• [PATCH v2 06/12] arm: dts: ls2080a: add label to pcie nodes in dts   Wasim Khan
• [PATCH v2 07/12] arm: dts: ls1088a: add label to pcie nodes in dts   Wasim Khan
• [PATCH v2 08/12] arm: dts: ls1012a: add label to pcie nodes in dts   Wasim Khan
• [PATCH v2 09/12] arm: dts: ls1043a: add label to pcie nodes in dts   Wasim Khan
• [PATCH v2 10/12] arm: dts: ls1028a: add label to pcie nodes in dts   Wasim Khan
• [PATCH v2 11/12] pci: layerscape: Add size check for config resource   Wasim Khan
• [PATCH v2 12/12] pci: ls_pcie_g4: Add size check for config resource   Wasim Khan
• [PATCH] MAINTAINERS: add Microchip PIT64B timer   Eugen.Hristev at microchip.com
• [PATCH] timer: mchp-pit64b: add support for pit64b   Eugen.Hristev at microchip.com
• [BUG] sandbox: './u-boot -l ' fails   Heinrich Schuchardt
• [PATCH] configs: lx2162a: Enable OPTEE support   Gaurav Jain
• [BUG] sandbox: './u-boot -l ' fails   Simon Glass
• [BUG] sandbox: './u-boot -l ' fails   Heinrich Schuchardt
• [BUG] sandbox: './u-boot -l ' fails   Simon Glass
• [PULL u-boot] Please pull u-boot-amlogic-20200928   Tom Rini
• Pull request for UEFI sub-system for efi-2020-10-rc6   Tom Rini
• pull request of u-boot-fsl-qoriq for v2020.10   Tom Rini
• [PATCH v6 0/9] riscv: Clean up timer drivers   Sean Anderson
• [PATCH v6 1/9] riscv: Rework riscv timer driver to only support S-mode   Sean Anderson
• [PATCH v6 2/9] timer: Add helper for drivers using timebase fallback   Sean Anderson
• [PATCH v6 3/9] timer: Add a test for timer_timebase_fallback   Sean Anderson
• [PATCH v6 4/9] riscv: Rework Andes PLMT as a UCLASS_TIMER driver   Sean Anderson
• [PATCH v6 5/9] riscv: Clean up initialization in Andes PLIC   Sean Anderson
• [PATCH v6 6/9] riscv: Rework Sifive CLINT as UCLASS_TIMER driver   Sean Anderson
• [PATCH v6 7/9] riscv: clk: Add CLINT clock to kendryte clock driver   Sean Anderson
• [PATCH v6 8/9] riscv: Update Kendryte device tree for new CLINT driver   Sean Anderson
• [PATCH v6 9/9] riscv: Update SiFive device tree for new CLINT driver   Sean Anderson
• [PATCH 2/2] watchdog: add watchdog behavior configuration   Tom Rini
• [PATCH 1/2] efi: Add dependency on M-mode for RISC-V   Sean Anderson
• [PATCH 2/2] efi: Fix typo in documentation   Sean Anderson
• [PATCH 1/2] efi: Add dependency on M-mode for RISC-V   Heinrich Schuchardt
• [PATCH 2/2] efi: Fix typo in documentation   Heinrich Schuchardt
• [PATCH 1/2] efi: Add dependency on M-mode for RISC-V   Sean Anderson
• [patch 0/8] RFC: Pinebook pro EDP support   Alper Nebi Yasak
• [PATCH] drivers: serial: probe all uart devices   Vabhav Sharma
• [PATCH V2] net: smc911x: Automatically Update ethaddr with MAC   Joe Hershberger
• [PATCH] spi: mvebu_a3700_spi: add support for cs-gpios   George Hilliard
• [PATCH 1/2] efi: Add dependency on M-mode for RISC-V   Heinrich Schuchardt
• [PATCH 1/2] efi: Add dependency on M-mode for RISC-V   Sean Anderson
• [PATCH 1/3] sunxi: dts: OrangePi Zero: Add SPI aliases to make bus usable with u-boot.   Michal Suchanek
• [PATCH 2/3] sunxi: dts: OrangePi Zero: Enable SPI flash.   Michal Suchanek
• [PATCH 3/3] sunxi: Enable SPI support on Orange Pi Zero   Michal Suchanek
• [BUG] sandbox: './u-boot -l ' fails   Heinrich Schuchardt
• What is the status of IMX8MM USB support?   Tim Harvey
• [BUG] sandbox: './u-boot -l ' fails   Simon Glass
• [PATCH 1/1] sandbox: add missing SDL key scan codes   Heinrich Schuchardt
• [PATCH 1/1] common: redefine getc()   Heinrich Schuchardt
• [BUG] sandbox: './u-boot -l ' fails   Heinrich Schuchardt
• [PATCH 1/1] video: typo Normlly   Heinrich Schuchardt
• [PATCH 1/1] sandbox: make SDL window resizable   Heinrich Schuchardt
• [BUG] sandbox: './u-boot -l ' fails   Heinrich Schuchardt
• [PATCH v2 1/1] riscv: restore global data pointer in trap handler   Rick Chen
• [PATCH 1/1] sandbox: avoid duplicate backslash input   Heinrich Schuchardt
• [PATCH] net: ftgmac100: Add support for board specific PHY interface address   Thirupathaiah Annapureddy
• [PATCH 1/3] sunxi: dts: OrangePi Zero: Add SPI aliases to make bus usable with u-boot.   Chen-Yu Tsai
• [PATCH] armv8: dts: fsl-lx2162a: add dspi node into qds dts   Qiang Zhao
• [PATCH] drivers: serial: probe all uart devices   Stefan Roese
• [PATCH] spi: mvebu_a3700_spi: add support for cs-gpios   Stefan Roese
• [PATCH] armv8: lx2162aqds: disable non existing pcie controllers   Wasim Khan
• [PATCH v2] distro_bootcmd: call EFI bootmgr even without having /EFI/boot   Michael Walle
• [PATCH] cmd: fat: Use do_save() for fatwrite   Lad Prabhakar
• Pull request: u-boot-riscv/master 20200929   uboot at andestech.com
• [PATCH v2 1/3] sunxi: dts: OrangePi Zero: Add SPI aliases to make bus usable with u-boot.   Michal Suchanek
• [PATCH v2 1/1] riscv: reset after crash   Rick Chen
• [PATCH] configs: lx2162aqds: Enable gpio driver in defconfig   Ran Wang
• [PATCH v2 1/1] riscv: reset after crash   Heinrich Schuchardt
• [RESEND PATCH] configs: lx2162aqds: Enable gpio driver in defconfig   Ran Wang
• [RESEND PATCH] configs: lx2162aqds: Enable gpio driver in defconfig   Ran Wang
• [PATCH] Define default CONFIG_PREBOOT with right config option   Peter Robinson
• mvebu_armada-37xx: Wrong usage of of_machine_is_compatible in u-boot master   Pali Rohár
• [PATCH] mtd: spi-nor-ids: Add Winbond W25M512JW flash entry   Biju Das
• [PATCH] spi: renesas_rpc_spi: Add compatible string for R8A774A1   Biju Das
• [PATCH] clk: renesas: r8a774a1-cpg-mssr: Add R8A774A1 RPC clock   Biju Das
• [PATCH] arm64: zynqmp: Enable EMMC boot   Michal Simek
• armv7R: K3: am654: U-Boot   Michal Simek
• [PATCH] arm64: dts: zynqmp: Fix leds subnode name for zcu100/ultra96 v1   Michal Simek
• [BUG] sandbox: './u-boot -l ' fails   Wolfgang Denk
• [BUG] sandbox: './u-boot -l ' fails   Heinrich Schuchardt
• Pull request: u-boot-riscv/master 20200929   Tom Rini
• mvebu_armada-37xx: Wrong usage of of_machine_is_compatible in u-boot master   Andre Heider
• mvebu_armada-37xx: Wrong usage of of_machine_is_compatible in u-boot master   Stefan Roese
• mvebu_armada-37xx: Wrong usage of of_machine_is_compatible in u-boot master   Pali Rohár
• mvebu_armada-37xx: Wrong usage of of_machine_is_compatible in u-boot master   Stefan Roese
• [PATCH] arm: mvebu: Espressobin: Fix checks against machine compatible strings   Andre Heider
• [PATCH] arm: mvebu: Espressobin: Fix checks against machine compatible strings   Pali Rohár
• mvebu_armada-37xx: Wrong usage of of_machine_is_compatible in u-boot master   Andre Heider
• [PATCH] arm: mvebu: Espressobin: Fix checks against machine compatible strings   Pali Rohár
• [PATCH] arm: mvebu: Espressobin: Fix checks against machine compatible strings   Andre Heider
• [PATCH 0/5] qemu-arm64: Allow booting via Trusted Firmware   Tom Rini
• [BUG] sandbox: './u-boot -l ' fails   Wolfgang Denk
• [PATCH] rockchip: Rock960: fix up USB support   Peter Robinson
• [PATCH 4/5] qemu: Drop ARCH_SUPPORT_TFABOOT   Tom Rini
• [PATCH 00/10] riscv: k210: Enable use of AI ram bank   Sean Anderson
• [PATCH 01/10] clk: k210: Fix PLLs not being enabled   Sean Anderson
• [PATCH 02/10] clk: Add support for the k210 clock driver pre-relocation   Sean Anderson
• [PATCH 03/10] riscv: Enable some devices pre-relocation   Sean Anderson
• [PATCH 04/10] lib: fdt: Add fdtdec_setup_mem_size_base_highest   Sean Anderson
• [PATCH 05/10] test: Add a test for fdtdec_setup_mem_size_base et al.   Sean Anderson
• [PATCH 06/10] ram: Add driver for K210 SRAM   Sean Anderson
• [PATCH 07/10] ram: sifive: Default to y only if compiling for fu540   Sean Anderson
• [PATCH 08/10] riscv: Probe ram in dram_init   Sean Anderson
• [PATCH 09/10] riscv: Enable AI ram on K210   Sean Anderson
• [PATCH 10/10] riscv: Don't reserve AI ram in k210 dts   Sean Anderson
• [PATCH 10/10] riscv: Don't reserve AI ram in k210 dts   Heinrich Schuchardt
• [PATCH 10/10] riscv: Don't reserve AI ram in k210 dts   Sean Anderson
• [PATCH 4/5] qemu: Drop ARCH_SUPPORT_TFABOOT   André Przywara
• [PATCH 4/5] qemu: Drop ARCH_SUPPORT_TFABOOT   Tom Rini
• [PATCH v2] drivers: serial: probe all uart devices   Vabhav Sharma
• [RESEND PATCH 1/3] pinctrl: bcm283x: DM_FLAG_PRE_RELOC: Remove OF_CONTROL check   Ovidiu Panait
• [RESEND PATCH 2/3] pinctrl: bcm283x: Read address from DT in ofdata_to_platdata   Ovidiu Panait
• [RESEND PATCH 3/3] pinctrl: bcm283x: Store the return value of dev_read_u32_default to int   Ovidiu Panait
• [PATCH] drivers: serial: probe all uart devices   Vabhav Sharma (OSS)
• [PATCH 0/3] add "call" command   Tom Rini
• [PATCH v3 1/3] net: cortina_ni: Add eth support for Cortina Access CAxxxx SoCs   Tom Rini
• [PATCH v3 2/3] net: phy: ca_phy: Add driver for CAxxxx SoCs   Tom Rini
• [PATCH v3 1/3] net: cortina_ni: Add eth support for Cortina Access CAxxxx SoCs   Alex Nemirovsky
• [PATCH v3 2/3] net: phy: ca_phy: Add driver for CAxxxx SoCs   Alex Nemirovsky
• [PATCH v3 2/3] net: phy: ca_phy: Add driver for CAxxxx SoCs   Tom Rini
• [PATCH v3 1/3] net: cortina_ni: Add eth support for Cortina Access CAxxxx SoCs   Alex Nemirovsky
• [PATCH v3 2/3] net: phy: ca_phy: Add driver for CAxxxx SoCs   Alex Nemirovsky
• [PATCH v2] spi: mvebu_a3700_spi: add support for cs-gpios   George Hilliard
• [PATCH v2 1/1] sandbox: redefine getc()   Heinrich Schuchardt
• [PATCH v2 1/1] sandbox: redefine getc()   Tom Rini
• [PATCH v1] arm: socfpga: fix Gen5 enable of EMAC via FPGA   Ralph Siemsen
• [PATCH 1/1] mmc: do not check argument of free() beforehand   Heinrich Schuchardt
• [PATCH 1/1] clk: kendryte: no need to check argument of free()   Heinrich Schuchardt
• Boot problem phycore AM335x   Martijn
• [PATCH 1/1] usb: xhci: avoid type conversion of void *   Heinrich Schuchardt
• [PATCH 1/1] clk: kendryte: no need to check argument of free()   Sean Anderson
• [PATCH 1/1] usb: xhci: avoid type conversion of void *   Marek Vasut
• Pull request: u-boot-riscv/master 20200929   Rick Chen
• [PATCH 1/2] spl: Avoid printing boot device if silent console is enabled   Otavio Salvador
• [PATCH 2/2] spl: Add SPL_SERIAL as requirement for SDP_USB_SDP   Otavio Salvador
• [PATCH v2 1/1] riscv: reset after crash   Rick Chen
• [PATCH 07/10] ram: sifive: Default to y only if compiling for fu540   Pragnesh Patel
• [PATCH v2] drivers: serial: probe all uart devices   Stefan Roese
• [PATCH v2] spi: mvebu_a3700_spi: add support for cs-gpios   Stefan Roese
• [PATCH 1/2] spl: Avoid printing boot device if silent console is enabled   Stefan Roese
• [PATCH 1/3] i2c: mediatek: add basic driver support   Heiko Schocher
• [PATCH 2/3] ARM: dts: Mediatek: add i2c node support for mt8512   Heiko Schocher
• [PATCH 3/3] configs: mt8512: Enable I2C related configs   Heiko Schocher
• [PATCH 1/3] i2c: mediatek: add basic driver support   Mingming Lee
• Pull request: u-boot-riscv/next 20200930   uboot at andestech.com
• [PATCH] Revert "i2c: rcar_i2c: Set the slave address from rcar_i2c_xfer"   Heiko Schocher
• [PATCH v6 10/12] riscv: Add pinmux and gpio bindings for Kendryte K210   Rick Chen
• [PATCH v6 11/12] riscv: add DT binding for BOOT button on Maix board   Rick Chen
• [PATCH v2] mmc: fsl_esdhc_imx: replace all readl/writel to esdhc_read32/esdhc_write32   haibo.chen at nxp.com
• [PATCH v2 0/5] Add i2c support for MediaTek mt8512   mingming lee
• [PATCH v2 1/5] i2c: mediatek: add basic driver support   mingming lee
• [PATCH v2 2/5] ARM: dts: Mediatek: add i2c node support for mt8512   mingming lee
• [PATCH v2 3/5] configs: mt8512: Enable I2C related configs   mingming lee
• [PATCH v2 4/5] dt-binding: i2c: add bindings for mediatek i2c driver   mingming lee
• [PATCH v2 5/5] MAINTAINERS: add i2c driver to ARM MEDIATEK   mingming lee
• [PATCH] Revert "i2c: rcar_i2c: Set the slave address from rcar_i2c_xfer"   Lad, Prabhakar
• [PATCH v2] i2c: rcar_i2c: Fix i2c read/write errors   Lad Prabhakar
• Boot problems imx8mp_evk   Peter Bergin
• STM32MP1: Adding TF-A causes kernel errors   Jan Kiszka
• [PATCH v2] i2c: rcar_i2c: Fix i2c read/write errors   Marek Vasut
• STM32MP1: Adding TF-A causes kernel errors   Marek Vasut
• STM32MP1: Adding TF-A causes kernel errors   Jan Kiszka
• [PATCH v2 0/5] powerpc, mpc83xx: add DM_ETH support   Heiko Schocher
• [PATCH v2] i2c: rcar_i2c: Fix i2c read/write errors   Lad, Prabhakar
• [PATCH v2 0/3] Add reboot mode support   Nandor Han
• [PATCH 1/2] spi: renesas_rpc_spi: Add compatible string for R8A774B1   Biju Das
• [PATCH 2/2] spi: renesas_rpc_spi: Add compatible string for R8A774E1   Biju Das
• [PATCH 2/2] spi: renesas_rpc_spi: Add compatible string for R8A774E1   Marek Vasut
• [PATCH 1/2] treewide: Fix wrong CONFIG_IS_ENABLED() handling   Alper Nebi Yasak
• [PATCH 2/2] checkpatch.pl: Make CONFIG_IS_ENABLED(CONFIG_*) an error   Alper Nebi Yasak
• [PATCH 0/3] add "call" command   Wolfgang Denk
• [PATCH 2/2] spi: renesas_rpc_spi: Add compatible string for R8A774E1   Biju Das
• [PATCH 1/2] spl: Avoid printing boot device if silent console is enabled   Otavio Salvador
• [PATCH v2 1/1] sandbox: redefine getc()   Wolfgang Denk
• [PATCH v2] spi: renesas_rpc_spi: Add R-Car Gen3 and RZ/G2 fallback compatibility string   Biju Das
• [PATCH v3] i2c: rcar_i2c: Fix i2c read/write errors   Lad Prabhakar
• [PATCH 1/1] mtd: fix typos in drivers/mtd/Kconfig   Tom Rini
• [PATCH 1/1] fs/squashfs: parameter check sqfs_read_metablock()   Tom Rini
• [PATCH] README: Fix typo in Board Initialisation Flow   Tom Rini
• [PATCH 1/1] video: typo Normlly   Tom Rini
• [PATCH] Define default CONFIG_PREBOOT with right config option   Tom Rini
• [PATCH v2 00/46] dm: Print device name in dev_xxx like Linux   Tom Rini
• STM32MP1: Adding TF-A causes kernel errors   Tom Rini
• [PATCH v2 00/46] dm: Print device name in dev_xxx like Linux   Tom Rini
• [PATCH v3 0/8] rockchip: Add Engicam PX30.Core support   Jagan Teki
• [PATCH v3 1/8] arm64: dts: rockchip: px30: Add Engicam EDIMM2.2 Starter Kit   Jagan Teki
• [PATCH v3 2/8] arm64: dts: rockchip: Add Engicam PX30.Core SOM   Jagan Teki
• [PATCH v3 3/8] rockchip: px30: Add EVB_PX30 Kconfig help   Jagan Teki
• [PATCH v3 4/8] board: engicam: Attach i.MX6 common code   Jagan Teki
• [PATCH v3 5/8] rockchip: Add Engicam PX30.Core EDIMM2.2 Starter Kit   Jagan Teki
• [PATCH v3 6/8] arm64: dts: rockchip: px30: Add Engicam C.TOUCH 2.0   Jagan Teki
• [PATCH v3 7/8] rockchip: Add Engicam PX30.Core C.TOUCH 2.0   Jagan Teki
• [PATCH v3 8/8] doc: rockchip: Document Rockchip miniloader flashing   Jagan Teki
• [PATCH] Define default CONFIG_PREBOOT with right config option   Simon Glass
• [PATCH v3 0/9] regmap: Add managed API, regmap fields, regmap config   Pratyush Yadav
• [PATCH v2] spi: mvebu_a3700_spi: add support for cs-gpios   Hilliard, George
• [PATCH v3] spi: mvebu_a3700_spi: add support for cs-gpios   George Hilliard
• Crash without display on RPi4 8Gb   Peter Robinson
• Crash without display on RPi4 8Gb   Peter Robinson
• [PATCH] arm: Kconfig: Explain TFABOOT   Andre Przywara
• STM32MP1: Adding TF-A causes kernel errors   Etienne Carriere
• [PATCH v3 0/9] regmap: Add managed API, regmap fields, regmap config   Tom Rini
• [PATCH v2 0/3] Add reboot mode support   Tom Rini
• Pull request: u-boot-riscv/next 20200930   Tom Rini
• [PATCH] arm: Kconfig: Explain TFABOOT   Tom Rini
• [PATCH v2] spi: mvebu_a3700_spi: add support for cs-gpios   Stefan Roese
• [PATCH v2] optee: copy FDT OP-TEE related nodes before generic FDT changes   Patrick Delaunay
• [RFC PATCH v2 0/1] Current strategy is to use right/left shift to implement div/mult   Mauro Condarelli
• [RFC PATCH v2 1/1] Fix missing __udivdi3 in SquashFS implementation.   Mauro Condarelli
• [PATCH v2] optee: copy FDT OP-TEE related nodes before generic FDT changes   Tom Rini
• [PATCH v2 0/6] qemu-arm64: Allow booting via Trusted Firmware   Andre Przywara
• [PATCH v2 1/6] arm64: PIE: Do not skip static relocation   Andre Przywara
• [PATCH v2 2/6] arm64: PIE: Skip fixups if distance is zero   Andre Przywara
• [PATCH v2 3/6] arm64: PIE: Allow fixed stack pointer   Andre Przywara
• [PATCH v2 4/6] qemu-arm: Remove need to specify flash banks   Andre Przywara
• [PATCH v2 5/6] qemu-arm: Drop ARCH_SUPPORT_TFABOOT   Andre Przywara
• [PATCH v2 6/6] qemu-arm64: Enable POSITION_INDEPENDENT   Andre Przywara
• [PATCH v2] drivers: serial: probe all uart devices   Simon Glass
• [PATCH v2 1/6] arm64: PIE: Do not skip static relocation   Stephen Warren
• [PATCH v2 0/6] qemu-arm64: Allow booting via Trusted Firmware   Tom Rini
• [PATCH v2 5/6] qemu-arm: Drop ARCH_SUPPORT_TFABOOT   Tom Rini
• [PATCH] optee: copy FDT OP-TEE related nodes before generic FDT changes   Tom Rini
• IMX8MM 4GiB boundary issue   Tim Harvey
• [PATCH] net: e1000: add defaults for i210 TX/RX PBSIZE   Tom Rini
• [RFC PATCH v2 1/1] Fix missing __udivdi3 in SquashFS implementation.   Daniel Schwierzeck