[PATCH v1 10/16] net: designware: socfpga: Add ATF support for MAC driver

Tan, Ley Foon ley.foon.tan at intel.com
Fri Sep 25 10:14:24 CEST 2020



> -----Original Message-----
> From: Ang, Chee Hong <chee.hong.ang at intel.com>
> Sent: Monday, August 17, 2020 12:34 PM
> To: u-boot at lists.denx.de
> Cc: Marek Vasut <marex at denx.de>; Simon Goldschmidt
> <simon.k.r.goldschmidt at gmail.com>; Tom Rini <trini at konsulko.com>; See,
> Chin Liang <chin.liang.see at intel.com>; Tan, Ley Foon
> <ley.foon.tan at intel.com>; Ang, Chee Hong <chee.hong.ang at intel.com>;
> Chee, Tien Fong <tien.fong.chee at intel.com>; Lim, Elly Siew Chin
> <elly.siew.chin.lim at intel.com>
> Subject: [PATCH v1 10/16] net: designware: socfpga: Add ATF support for
> MAC driver
> 
> In non-secure mode (EL2), MAC driver calls the SMC/PSCI services provided
> by ATF to setup the PHY interface.
> 
> Signed-off-by: Chee Hong Ang <chee.hong.ang at intel.com>
> ---
>  drivers/net/dwmac_socfpga.c | 43
> +++++++++++++++++++++++++++++++++----
>  1 file changed, 39 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/net/dwmac_socfpga.c b/drivers/net/dwmac_socfpga.c
> index e93561dffa..0dd5a54405 100644
> --- a/drivers/net/dwmac_socfpga.c
> +++ b/drivers/net/dwmac_socfpga.c
> @@ -17,7 +17,9 @@
>  #include <dm/device_compat.h>
>  #include <linux/err.h>
> 
> +#include <asm/arch/smc_api.h>
>  #include <asm/arch/system_manager.h>
> +#include <linux/intel-smc.h>
> 
>  struct dwmac_socfpga_platdata {
>  	struct dw_eth_pdata	dw_eth_pdata;
> @@ -64,6 +66,35 @@ static int dwmac_socfpga_ofdata_to_platdata(struct
> udevice *dev)
>  	return designware_eth_ofdata_to_platdata(dev);
>  }
> 
> +#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_ATF) static int
> +dwmac_socfpga_fw_setphy(struct udevice *dev, u32 modereg) {
> +	struct ofnode_phandle_args pargs;
> +	u64 args[2];
> +	int ret;
> +
> +	ret = dev_read_phandle_with_args(dev, "altr,sysmgr-syscon", NULL,
> +					 1, 0, &pargs);
> +	if (ret) {
> +		dev_err(dev, "Failed to get syscon: %d\n", ret);
> +		return ret;
> +	}
> +
> +	if (pargs.args_count < 1) {
> +		dev_err(dev, "No syscon args found\n");
> +		return -EINVAL;
> +	}
> +
Why need get from "altr,sysmgr-syscon" phandle again?
dwmac_socfpga_ofdata_to_platdata() already doing same thing.

> +	args[0] = ((u64)pargs.args[0] - SYSMGR_SOC64_EMAC0) >> 2;
> +	args[1] = modereg;
> +
> +	if (invoke_smc(INTEL_SIP_SMC_HPS_SET_PHYINTF, args, 2, NULL, 0))
> +		return -EIO;
> +
> +	return 0;
> +}
> +#endif
> +
>  static int dwmac_socfpga_probe(struct udevice *dev)  {
>  	struct dwmac_socfpga_platdata *pdata = dev_get_platdata(dev);
> @@ -71,7 +102,6 @@ static int dwmac_socfpga_probe(struct udevice *dev)
>  	struct reset_ctl_bulk reset_bulk;
>  	int ret;
>  	u32 modereg;
> -	u32 modemask;
> 
>  	switch (edata->phy_interface) {
>  	case PHY_INTERFACE_MODE_MII:
> @@ -97,9 +127,14 @@ static int dwmac_socfpga_probe(struct udevice *dev)
> 
>  	reset_assert_bulk(&reset_bulk);
> 
> -	modemask = SYSMGR_EMACGRP_CTRL_PHYSEL_MASK << pdata-
> >reg_shift;
> -	clrsetbits_le32(pdata->phy_intf, modemask,
> -			modereg << pdata->reg_shift);
> +#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_ATF)
> +	ret = dwmac_socfpga_fw_setphy(dev, modereg);
> +	if (ret)
> +		return ret;
> +#else
> +	clrsetbits_le32(pdata->phy_intf,
> SYSMGR_EMACGRP_CTRL_PHYSEL_MASK <<
> +			pdata->reg_shift, modereg << pdata->reg_shift);
> #endif
Move the #ifdef .. #endif switch to dwmac_socfpga_fw_setphy(). 
So, that it can call to dwmac_socfpga_fw_setphy() directly here with #ifdef.
For "[PATCH v1 09/16] mmc: dwmmc: socfpga: Add ATF support for MMC driver" patch, also change the same.


Regards
Ley Foon




More information about the U-Boot mailing list