[PATCHv6 09/18] configs: p1_p2_rdb: Add the default address of vsc7385 firmware

[Zhiqiang Hou]

From: Hou Zhiqiang <Zhiqiang.Hou at nxp.com>

Add the environment 'vscfw_addr' to assign a default address for
vsc7385 firmware uploading.

Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou at nxp.com>
---
V6:
 - No change.

 include/configs/p1_p2_rdb_pc.h | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/include/configs/p1_p2_rdb_pc.h b/include/configs/p1_p2_rdb_pc.h
index 1b74177b2f..a159285c98 100644
--- a/include/configs/p1_p2_rdb_pc.h
+++ b/include/configs/p1_p2_rdb_pc.h
@@ -451,6 +451,7 @@
 
 /* Vsc7385 switch */
 #ifdef CONFIG_VSC7385_ENET
+#define __VSCFW_ADDR			"vscfw_addr=ef000000"
 #define CONFIG_SYS_VSC7385_BASE		0xffb00000
 
 #ifdef CONFIG_PHYS_64BIT
@@ -809,6 +810,7 @@ i2c mw 18 3 __SW_BOOT_MASK 1; reset
 "ramdisk_size=120000\0"	\
 "map_lowernorbank=i2c dev 1; i2c mw 18 1 02 1; i2c mw 18 3 fd 1\0" \
 "map_uppernorbank=i2c dev 1; i2c mw 18 1 00 1; i2c mw 18 3 fd 1\0" \
+__stringify(__VSCFW_ADDR)"\0" \
 __stringify(__NOR_RST_CMD)"\0" \
 __stringify(__SPI_RST_CMD)"\0" \
 __stringify(__SD_RST_CMD)"\0" \
-- 
2.17.1