[PATCH v2 3/3] arm64: dts: a3720: add support for espressobin with populated emmc

[Andre Heider]

Import armada-3720-espressobin-emmc.dts from Linux, but use sdhc1 for
emmc, since our dtsi is still based on downstream and sdhc0 is used for
the sd card.

Signed-off-by: Andre Heider <a.heider at gmail.com>
---
 arch/arm/dts/Makefile                         |  1 +
 arch/arm/dts/armada-3720-espressobin-emmc.dts | 44 +++++++++++++++++++
 doc/README.marvell                            |  7 ++-
 3 files changed, 50 insertions(+), 2 deletions(-)
 create mode 100644 arch/arm/dts/armada-3720-espressobin-emmc.dts

diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 5e34192be6..8f1958b5a7 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -202,6 +202,7 @@ dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \
 dtb-$(CONFIG_ARCH_MVEBU) +=			\
 	armada-3720-db.dtb			\
 	armada-3720-espressobin.dtb		\
+	armada-3720-espressobin-emmc.dtb	\
 	armada-3720-turris-mox.dtb		\
 	armada-3720-uDPU.dtb			\
 	armada-375-db.dtb			\
diff --git a/arch/arm/dts/armada-3720-espressobin-emmc.dts b/arch/arm/dts/armada-3720-espressobin-emmc.dts
new file mode 100644
index 0000000000..29ccb6a573
--- /dev/null
+++ b/arch/arm/dts/armada-3720-espressobin-emmc.dts
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Globalscale Marvell ESPRESSOBin Board with eMMC
+ * Copyright (C) 2018 Marvell
+ *
+ * Romain Perier <romain.perier at free-electrons.com>
+ * Konstantin Porotchkin <kostap at marvell.com>
+ *
+ */
+/*
+ * Schematic available at http://espressobin.net/wp-content/uploads/2017/08/ESPRESSObin_V5_Schematics.pdf
+ */
+
+/dts-v1/;
+
+#include "armada-3720-espressobin.dtsi"
+
+/ {
+	model = "Globalscale Marvell ESPRESSOBin Board (eMMC)";
+	compatible = "globalscale,espressobin-emmc", "globalscale,espressobin",
+		     "marvell,armada3720", "marvell,armada3710";
+};
+
+/* U11 */
+&sdhci1 {
+	non-removable;
+	bus-width = <8>;
+	mmc-ddr-1_8v;
+	mmc-hs400-1_8v;
+	marvell,xenon-emmc;
+	marvell,xenon-tun-count = <9>;
+	marvell,pad-type = "fixed-1-8v";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc_pins>;
+	status = "okay";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	mmccard: mmccard at 0 {
+		compatible = "mmc-card";
+		reg = <0>;
+	};
+};
diff --git a/doc/README.marvell b/doc/README.marvell
index 5416bc3035..be07f31f8c 100644
--- a/doc/README.marvell
+++ b/doc/README.marvell
@@ -43,8 +43,11 @@ Build Procedure
         In order to prevent this, the required device-tree MUST be set during compilation.
         All device-tree files are located in ./arch/arm/dts/ folder.
 
-	For other DB boards (MacchiatoBin, EspressoBin and 3700 DB board) compile u-boot with
-	just default device-tree from defconfig using:
+	For the EspressoBin board with populated eMMC device use
+		# make DEVICE_TREE=armada-3720-espressobin-emmc
+
+	For other DB boards (MacchiatoBin, EspressoBin without soldered eMMC and 3700 DB board)
+	compile u-boot with just default device-tree from defconfig using:
 
 		# make
 
-- 
2.28.0