[PATCH 0/8] ARM: mach-meson: update & rework USB for GXL, GXM & AXG

[Neil Armstrong]

On 10/09/2020 10:48, Neil Armstrong wrote:
> This serie follows the recent work under Linux to rework and update support of
> the USB complex in the Amlogic GXL, GXM & AXG SoCs.
> 
> This rework follows the clean implementation for the G12A & following SoCs to support
> Host, Device & OTG functionnality.
> 
> The GXL, GXM & AXG USB complex is architectured in the same was as the G12A & later USB complex,
> thus we can use the same architecture but adapted to the different init & config flow found
> in the Amlogic GXL, GXM & AXG SoCs.
> 
> With this patchset, USB Host functionnality is retained, working & tested on the Khadas VIM2 (GXM),
> Libretech-CC (GXL) & S400 (AXG), with Device mode added and tested by using the UMS gadget.
> 
> Neil Armstrong (8):
>   ARM: dts: sync amlogic AXG/GXL/GXM DT from Linux 5.8-rc1
>   usb: dwc3: add Amlogic GXL & GXL DWC3 Glue
>   ARM: mach-meson: use new DWC3 glue for GXL & GXM
>   phy: meson-gxl: remove invalid USB3 PHY driver
>   phy: meson-gxl-usb: depend on Meson AXG aswell
>   arm: meson-axg: add board_usb_init()/cleanup() for USB gadget
>   ARM: dts: meson-axg: add USB nodes for S400
>   configs: s400: enable USB
> 
>  arch/arm/dts/meson-axg-s400-u-boot.dtsi       |  12 +
>  arch/arm/dts/meson-axg-u-boot.dtsi            |  62 +++
>  arch/arm/dts/meson-axg.dtsi                   |   6 +-
>  arch/arm/dts/meson-gx-libretech-pc.dtsi       |  78 +++-
>  arch/arm/dts/meson-gx.dtsi                    |  23 +-
>  arch/arm/dts/meson-gxbb-nanopi-k2.dts         |   2 +-
>  arch/arm/dts/meson-gxbb-odroidc2.dts          |   2 +-
>  arch/arm/dts/meson-gxbb.dtsi                  |  23 +
>  .../meson-gxl-s805x-libretech-ac-u-boot.dtsi  |   4 -
>  arch/arm/dts/meson-gxl-s805x-libretech-ac.dts |  73 ++-
>  .../meson-gxl-s905d-libretech-pc-u-boot.dtsi  |   4 -
>  .../meson-gxl-s905x-khadas-vim-u-boot.dtsi    |   4 -
>  arch/arm/dts/meson-gxl-s905x-khadas-vim.dts   |   4 +
>  .../meson-gxl-s905x-libretech-cc-u-boot.dtsi  |   4 -
>  arch/arm/dts/meson-gxl-s905x-libretech-cc.dts |  77 +++-
>  arch/arm/dts/meson-gxl-s905x-p212.dtsi        |   3 +-
>  arch/arm/dts/meson-gxl-u-boot.dtsi            |  16 -
>  arch/arm/dts/meson-gxl.dtsi                   |  79 +++-
>  .../arm/dts/meson-gxm-khadas-vim2-u-boot.dtsi |   4 -
>  arch/arm/dts/meson-gxm-khadas-vim2.dts        |   3 +-
>  .../meson-gxm-s912-libretech-pc-u-boot.dtsi   |   4 -
>  arch/arm/dts/meson-gxm.dtsi                   |   7 +-
>  arch/arm/include/asm/arch-meson/usb-gx.h      |   3 +-
>  arch/arm/mach-meson/board-axg.c               | 128 ++++++
>  arch/arm/mach-meson/board-gx.c                | 127 +++---
>  configs/khadas-vim2_defconfig                 |   2 +-
>  configs/khadas-vim_defconfig                  |   2 +-
>  configs/libretech-ac_defconfig                |   2 +-
>  configs/libretech-cc_defconfig                |   2 +-
>  configs/libretech-s905d-pc_defconfig          |   2 +-
>  configs/libretech-s912-pc_defconfig           |   2 +-
>  configs/p212_defconfig                        |   2 +-
>  configs/s400_defconfig                        |  15 +
>  drivers/phy/Kconfig                           |   2 +-
>  drivers/phy/Makefile                          |   2 +-
>  drivers/phy/meson-gxl-usb3.c                  | 219 ---------
>  drivers/usb/dwc3/Kconfig                      |   8 +
>  drivers/usb/dwc3/Makefile                     |   1 +
>  drivers/usb/dwc3/dwc3-meson-gxl.c             | 425 ++++++++++++++++++
>  .../reset/amlogic,meson-gxbb-reset.h          |   2 +-
>  include/dt-bindings/sound/meson-aiu.h         |  18 +
>  41 files changed, 1092 insertions(+), 366 deletions(-)
>  create mode 100644 arch/arm/dts/meson-axg-u-boot.dtsi
>  delete mode 100644 drivers/phy/meson-gxl-usb3.c
>  create mode 100644 drivers/usb/dwc3/dwc3-meson-gxl.c
>  create mode 100644 include/dt-bindings/sound/meson-aiu.h
> 

Applied to u-boot-amlogic-next