[PATCH v2 0/4] amlogic: vim3: add support for dynamic PCIe enable
Neil Armstrong
narmstrong at baylibre.com
Mon Sep 21 09:34:11 CEST 2020
The VIM3 on-board MCU can mux the PCIe/USB3.0 shared differential
lines using a FUSB340TMX USB 3.1 SuperSpeed Data Switch between
an USB3.0 Type A connector and a M.2 Key M slot.
The PHY driving these differential lines is shared between
the USB3.0 controller and the PCIe Controller, thus only
a single controller can use it.
This serie adds a VIM3 specific board support and adds this dynamic
switching right before booting Linux.
Changes since v1:
- add missing khadas-mcu.h
- add documentation to switch pcie on/off
Neil Armstrong (4):
ARM: dts: sync amlogic G12A/SM1 DT from Linux 5.9-rc1
board: amlogic: add a vim3 specific board support
configs: vim3: use the vim3 board support
board: amlogic: vim3: add support for dynamic PCIe enable
arch/arm/dts/meson-g12-common.dtsi | 55 ++++---
arch/arm/dts/meson-g12b-odroid-n2.dts | 136 +++++++++++++++++-
arch/arm/dts/meson-khadas-vim3.dtsi | 26 +++-
arch/arm/dts/meson-sm1-khadas-vim3l.dts | 92 ++++++++++++
arch/arm/dts/meson-sm1-odroid-c4.dts | 88 ++++++++++++
board/amlogic/vim3/MAINTAINERS | 9 ++
board/amlogic/vim3/Makefile | 6 +
board/amlogic/vim3/khadas-mcu.h | 81 +++++++++++
board/amlogic/vim3/vim3.c | 136 ++++++++++++++++++
board/amlogic/w400/MAINTAINERS | 4 -
configs/khadas-vim3_defconfig | 5 +-
configs/khadas-vim3l_defconfig | 5 +-
doc/board/amlogic/khadas-vim3.rst | 27 ++++
doc/board/amlogic/khadas-vim3l.rst | 27 ++++
include/dt-bindings/clock/g12a-clkc.h | 2 +
.../dt-bindings/sound/meson-g12a-toacodec.h | 10 ++
16 files changed, 679 insertions(+), 30 deletions(-)
create mode 100644 board/amlogic/vim3/MAINTAINERS
create mode 100644 board/amlogic/vim3/Makefile
create mode 100644 board/amlogic/vim3/khadas-mcu.h
create mode 100644 board/amlogic/vim3/vim3.c
create mode 100644 include/dt-bindings/sound/meson-g12a-toacodec.h
--
2.22.0
More information about the U-Boot
mailing list