[PATCH v3 2/3] net: phy: ca_phy: Add driver for CAxxxx SoCs
Tom Rini
trini at konsulko.com
Tue Sep 29 19:57:40 CEST 2020
On Wed, Sep 23, 2020 at 05:59:13PM -0700, Alex Nemirovsky wrote:
> From: Abbie Chang <abbie.chang at cortina-access.com>
>
> Add phy driver support for MACs embedded inside Cortina Access SoCs
>
> Signed-off-by: Abbie Chang <abbie.chang at cortina-access.com>
> Signed-off-by: Alex Nemirovsky <alex.nemirovsky at cortina-access.com>
>
> CC: Joe Hershberger <joe.hershberger at ni.com>
> CC: Tom Rini <trini at konsulko.com>
> CC: Aaron Tseng <aaron.tseng at cortina-access.com>
>
> Moved out PHY specific code out of Cortina NI Ethernet driver
> and into a Cortina Access PHY interface driver
[snip]
> +__weak void __internal_phy_init(struct phy_device *phydev, int reset_phy)
> +{
> + u8 phy_addr;
> + u16 data;
> +
> + /* should initialize 4 GPHYs at once */
> + for (phy_addr = 4; phy_addr > 0; phy_addr--) {
> + phydev->addr = phy_addr;
> + phy_write(phydev, MDIO_DEVAD_NONE, 31, 0x0BC6);
> + phy_write(phydev, MDIO_DEVAD_NONE, 16, 0x0053);
> + phy_write(phydev, MDIO_DEVAD_NONE, 18, 0x4003);
> + phy_write(phydev, MDIO_DEVAD_NONE, 22, 0x7e01);
> + phy_write(phydev, MDIO_DEVAD_NONE, 31, 0x0A42);
> + phy_write(phydev, MDIO_DEVAD_NONE, 31, 0x0A40);
> + phy_write(phydev, MDIO_DEVAD_NONE, 0, 0x1140);
> + }
> +
> + /* workaround to fix GPHY fail */
> + for (phy_addr = 1; phy_addr < 5; phy_addr++) {
> + /* Clear clock fail interrupt */
> + phydev->addr = phy_addr;
> + phy_write(phydev, MDIO_DEVAD_NONE, 31, 0xB90);
> + data = phy_read(phydev, MDIO_DEVAD_NONE, 19);
> + if (data == 0x10) {
> + phy_write(phydev, MDIO_DEVAD_NONE, 31, 0xB90);
> + data = phy_read(phydev, MDIO_DEVAD_NONE, 19);
> + printf("%s: read again.\n", __func__);
> + }
> +
> + printf("%s: phy_addr=%d, read register 19, value=0x%x\n",
> + __func__, phy_addr, data);
> + }
> +}
> +
> +__weak void __external_phy_init(struct phy_device *phydev, int reset_phy)
> +{
> + u16 val;
> +
> + /* Disable response PHYAD=0 function of RTL8211 series PHY */
> + /* REG31 write 0x0007, set to extension page */
> + phy_write(phydev, MDIO_DEVAD_NONE, 31, 0x0007);
> +
> + /* REG30 write 0x002C, set to extension page 44 */
> + phy_write(phydev, MDIO_DEVAD_NONE, 30, 0x002C);
> +
> + /*
> + * REG27 write bit[2] = 0 disable response PHYAD = 0 function.
> + * we should read REG27 and clear bit[2], and write back
> + */
> + val = phy_read(phydev, MDIO_DEVAD_NONE, 27);
> + val &= ~(1 << 2);
> + phy_write(phydev, MDIO_DEVAD_NONE, 27, val);
> +
> + /* REG31 write 0X0000, back to page0 */
> + phy_write(phydev, MDIO_DEVAD_NONE, 31, 0x0000);
> +}
> +
> +static int rtl8211_external_config(struct phy_device *phydev)
> +{
> + __external_phy_init(phydev, 0);
> + printf("%s: initialize RTL8211 external done.\n", __func__);
> + return 0;
> +}
> +
> +static int rtl8211_internal_config(struct phy_device *phydev)
> +{
> + struct phy_device phydev_init;
> +
> + memcpy(&phydev_init, phydev, sizeof(struct phy_device));
> + /* should initialize 4 GPHYs at once */
> + __internal_phy_init(&phydev_init, 0);
> + printf("%s: initialize RTL8211 internal done.\n", __func__);
> + return 0;
> +}
Why do we have two weak functions (which have very generic names and
could get overwritten by accident) and not just inlining them to the
functions?
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 659 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20200929/8272d949/attachment.sig>
More information about the U-Boot
mailing list