[PATCH] mmc: xenon_sdhci: Add missing common host capabilities

[Marek Behún]

On Thu, 10 Sep 2020 19:53:40 +0200
Andre Heider <a.heider at gmail.com> wrote:

> Use mmc_of_parse() to set the common host properties. That includes
> "bus-width", so parsing it can be removed from the driver.
> 
> But more importantly, "non-removable" is now respected, which fixes
> the usage of eMMC.
> 
> Signed-off-by: Andre Heider <a.heider at gmail.com>
> ---
> 
> Tested myself on v5 without emmc, `mmc info` is unchanged for my sd
> card
> 
> Tested by Gérald on v7 emmc, which started working with this patch:
> => mmc info  
> Device: sdhci at d8000
> Manufacturer ID: 45
> OEM: 100
> Name: SEM04
> Bus Speed: 52000000
> Mode: MMC High Speed (52MHz)
> Rd Block Len: 512
> MMC version 4.5
> High Capacity: Yes
> Capacity: 3.7 GiB
> Bus Width: 8-bit
> Erase Group Size: 256 KiB
> HC WP Group Size: 8 MiB
> User Capacity: 3.7 GiB WRREL
> Boot Capacity: 2 MiB
> RPMB Capacity: 2 MiB
> Boot area 0 is not write protected
> Boot area 1 is not write protected
> 
>  drivers/mmc/xenon_sdhci.c | 18 ++++--------------
>  1 file changed, 4 insertions(+), 14 deletions(-)
> 
> diff --git a/drivers/mmc/xenon_sdhci.c b/drivers/mmc/xenon_sdhci.c
> index 7f9a579c83..6ce9d00d0a 100644
> --- a/drivers/mmc/xenon_sdhci.c
> +++ b/drivers/mmc/xenon_sdhci.c
> @@ -485,20 +485,10 @@ static int xenon_sdhci_probe(struct udevice
> *dev) armada_3700_soc_pad_voltage_set(host);
>  
>  	host->host_caps = MMC_MODE_HS | MMC_MODE_HS_52MHz |
> MMC_MODE_DDR_52MHz;
> -	switch (fdtdec_get_int(gd->fdt_blob, dev_of_offset(dev),
> "bus-width",
> -		1)) {
> -	case 8:
> -		host->host_caps |= MMC_MODE_8BIT;
> -		break;
> -	case 4:
> -		host->host_caps |= MMC_MODE_4BIT;
> -		break;
> -	case 1:
> -		break;
> -	default:
> -		printf("Invalid \"bus-width\" value\n");
> -		return -EINVAL;
> -	}
> +
> +	ret = mmc_of_parse(dev, &plat->cfg);
> +	if (ret)
> +		return ret;
>  
>  	host->ops = &xenon_sdhci_ops;
>  

Tested-by: Marek Behún <marek.behun at nic.cz>