[PATCHv6 00/18] powerpc: convert p1010, p1020 and p2020 RDB boards to DM_ETH
Zhiqiang Hou
Zhiqiang.Hou at nxp.com
Tue Sep 22 10:49:59 CEST 2020
From: Hou Zhiqiang <Zhiqiang.Hou at nxp.com>
This patchset is to convert P1010, P1020 and P2020 RDB boards to DM_ETH.
V5:
Merged the following thread:
https://patchwork.ozlabs.org/project/uboot/list/?series=174343&archive=both&state=*
Hou Zhiqiang (16):
net: fsl_mdio: Change to use virtual address
net: fsl_mdio: Correct the MII management register block address
net: tsec: convert to use DM_MDIO when DM_ETH enabled
net: tsec: Add fixed-link PHY support
net: tsec: Add the compatible string "gianfar" support
powerpc: mpc8xxx: Don't compile cpu_eth_init() when DM_ETH enabled
fsl: p1_p2_rdb: Move vsc7835 firmware uploading to
board_early_init_r()
configs: p1_p2_rdb: Add the default address of vsc7385 firmware
dts: powerpc: p1020rdb: Add eTSEC DT nodes
powerpc: p1_p2_rdb: Don't compile board_eth_init() when DM_ETH enabled
configs: P1020RDB: Enable DM_ETH config
dts: powerpc: p1010rdb: Add eTSEC DT nodes
powerpc: p1010rdb: Compile legacy ethernet init function when no
DM_ETH
configs: P1010RDB: Enable DM_ETH config
dts: powerpc: p2020rdb: Add eTSEC DT nodes
configs: P2020RDB: Enable DM_ETH config
Vladimir Oltean (2):
phy: make phy_connect_fixed work with a null mdio bus
configs: enable DM_MDIO for LS1021A-TWR and LS1021A-TSN
arch/powerpc/cpu/mpc8xxx/cpu.c | 2 +
arch/powerpc/dts/p1010rdb-pa.dts | 1 +
arch/powerpc/dts/p1010rdb-pa_36b.dts | 1 +
arch/powerpc/dts/p1010rdb.dtsi | 50 +++++++++++++++
arch/powerpc/dts/p1010si-post.dtsi | 25 ++++++++
arch/powerpc/dts/p1020-post.dtsi | 20 +++++-
arch/powerpc/dts/p1020rdb-pc.dts | 1 +
arch/powerpc/dts/p1020rdb-pc.dtsi | 55 ++++++++++++++++
arch/powerpc/dts/p1020rdb-pc_36b.dts | 1 +
arch/powerpc/dts/p1020rdb-pd.dts | 45 ++++++++++++++
arch/powerpc/dts/p2020-post.dtsi | 8 ++-
arch/powerpc/dts/p2020rdb-pc.dts | 1 +
arch/powerpc/dts/p2020rdb-pc.dtsi | 50 +++++++++++++++
arch/powerpc/dts/p2020rdb-pc_36b.dts | 1 +
arch/powerpc/dts/pq3-etsec1-0.dtsi | 28 +++++++++
arch/powerpc/dts/pq3-etsec1-1.dtsi | 28 +++++++++
arch/powerpc/dts/pq3-etsec1-2.dtsi | 28 +++++++++
arch/powerpc/dts/pq3-etsec1-3.dtsi | 28 +++++++++
arch/powerpc/dts/pq3-etsec2-0.dtsi | 35 +++++++++++
arch/powerpc/dts/pq3-etsec2-1.dtsi | 35 +++++++++++
arch/powerpc/dts/pq3-etsec2-2.dtsi | 35 +++++++++++
arch/powerpc/dts/pq3-etsec2-grp2-0.dtsi | 16 +++++
arch/powerpc/dts/pq3-etsec2-grp2-1.dtsi | 16 +++++
arch/powerpc/dts/pq3-etsec2-grp2-2.dtsi | 16 +++++
board/freescale/p1010rdb/p1010rdb.c | 2 +
board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c | 37 ++++++-----
configs/P1010RDB-PA_36BIT_NAND_defconfig | 2 +
configs/P1010RDB-PA_36BIT_NOR_defconfig | 2 +
configs/P1010RDB-PA_36BIT_SDCARD_defconfig | 2 +
configs/P1010RDB-PA_36BIT_SPIFLASH_defconfig | 2 +
configs/P1010RDB-PA_NAND_defconfig | 2 +
configs/P1010RDB-PA_NOR_defconfig | 2 +
configs/P1010RDB-PA_SDCARD_defconfig | 2 +
configs/P1010RDB-PA_SPIFLASH_defconfig | 2 +
configs/P1010RDB-PB_36BIT_NAND_defconfig | 2 +
configs/P1010RDB-PB_36BIT_NOR_defconfig | 2 +
configs/P1010RDB-PB_36BIT_SDCARD_defconfig | 2 +
configs/P1010RDB-PB_36BIT_SPIFLASH_defconfig | 2 +
configs/P1010RDB-PB_NAND_defconfig | 2 +
configs/P1010RDB-PB_NOR_defconfig | 2 +
configs/P1010RDB-PB_SDCARD_defconfig | 2 +
configs/P1010RDB-PB_SPIFLASH_defconfig | 2 +
configs/P1020RDB-PC_36BIT_NAND_defconfig | 3 +
configs/P1020RDB-PC_36BIT_SDCARD_defconfig | 3 +
configs/P1020RDB-PC_36BIT_SPIFLASH_defconfig | 3 +
configs/P1020RDB-PC_36BIT_defconfig | 3 +
configs/P1020RDB-PC_NAND_defconfig | 3 +
configs/P1020RDB-PC_SDCARD_defconfig | 3 +
configs/P1020RDB-PC_SPIFLASH_defconfig | 3 +
configs/P1020RDB-PC_defconfig | 3 +
configs/P1020RDB-PD_NAND_defconfig | 3 +
configs/P1020RDB-PD_SDCARD_defconfig | 3 +
configs/P1020RDB-PD_SPIFLASH_defconfig | 3 +
configs/P1020RDB-PD_defconfig | 3 +
configs/P2020RDB-PC_36BIT_NAND_defconfig | 3 +
configs/P2020RDB-PC_36BIT_SDCARD_defconfig | 3 +
configs/P2020RDB-PC_36BIT_SPIFLASH_defconfig | 3 +
configs/P2020RDB-PC_36BIT_defconfig | 3 +
configs/P2020RDB-PC_NAND_defconfig | 3 +
configs/P2020RDB-PC_SDCARD_defconfig | 3 +
configs/P2020RDB-PC_SPIFLASH_defconfig | 3 +
configs/P2020RDB-PC_defconfig | 3 +
configs/ls1021atsn_qspi_defconfig | 1 +
configs/ls1021atsn_sdcard_defconfig | 1 +
configs/ls1021atwr_nor_SECURE_BOOT_defconfig | 1 +
configs/ls1021atwr_nor_defconfig | 1 +
configs/ls1021atwr_nor_lpuart_defconfig | 1 +
configs/ls1021atwr_qspi_defconfig | 1 +
...s1021atwr_sdcard_ifc_SECURE_BOOT_defconfig | 1 +
configs/ls1021atwr_sdcard_ifc_defconfig | 1 +
configs/ls1021atwr_sdcard_qspi_defconfig | 1 +
doc/device-tree-bindings/net/fsl-tsec-phy.txt | 2 +-
drivers/net/fsl_mdio.c | 28 +++++++--
drivers/net/phy/phy.c | 4 +-
drivers/net/tsec.c | 62 ++++++++-----------
include/configs/p1_p2_rdb_pc.h | 2 +
include/fsl_mdio.h | 4 ++
include/tsec.h | 4 ++
78 files changed, 707 insertions(+), 65 deletions(-)
create mode 100644 arch/powerpc/dts/p1020rdb-pc.dtsi
create mode 100644 arch/powerpc/dts/p2020rdb-pc.dtsi
create mode 100644 arch/powerpc/dts/pq3-etsec1-0.dtsi
create mode 100644 arch/powerpc/dts/pq3-etsec1-1.dtsi
create mode 100644 arch/powerpc/dts/pq3-etsec1-2.dtsi
create mode 100644 arch/powerpc/dts/pq3-etsec1-3.dtsi
create mode 100644 arch/powerpc/dts/pq3-etsec2-0.dtsi
create mode 100644 arch/powerpc/dts/pq3-etsec2-1.dtsi
create mode 100644 arch/powerpc/dts/pq3-etsec2-2.dtsi
create mode 100644 arch/powerpc/dts/pq3-etsec2-grp2-0.dtsi
create mode 100644 arch/powerpc/dts/pq3-etsec2-grp2-1.dtsi
create mode 100644 arch/powerpc/dts/pq3-etsec2-grp2-2.dtsi
--
2.17.1
More information about the U-Boot
mailing list