[PATCH 2/2] pwm: Add a driver for Chrome OS EC PWM
Alper Nebi Yasak
alpernebiyasak at gmail.com
Wed Sep 23 18:52:31 CEST 2020
This PWM is used in rk3399-gru-bob and rk3399-gru-kevin to control
the display brightness. We can only change the duty cycle, so on
set_config() we just try to match the duty cycle that dividing duty_ns
by period_ns gives us. To disable, we set the duty cycle to zero while
keeping the old value for when we want to re-enable it.
The cros_ec_set_pwm_duty() function is taken from Depthcharge's
cros_ec_set_bl_pwm_duty() but modified to use the generic pwm type.
The driver itself is very loosely based on rk_pwm.c for the general pwm
driver structure.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak at gmail.com>
---
I'm testing on a rk3399-gru-kevin with a lot of other patches to get it
(and it's screen) barely working, but using something like the following
in a rk_board_late_init() added to gru.c gets the backlight to change:
struct *udevice panel;
uclass_first_device_err(UCLASS_PANEL, &panel);
panel_enable_backlight(panel);
panel_set_backlight(panel, 50);
panel_set_backlight(panel, 100);
The actual tree I'm testing and how I'm getting it to chainload from the
vendor firmware (see commit message there) is available here:
https://github.com/alpernebbi/u-boot/tree/rk3399-gru-kevin/wip
(currently at commit 2cdb2cc4fb503dd5f6958e8f30406293e90b835)
drivers/misc/cros_ec.c | 14 +++++++
drivers/pwm/Kconfig | 9 +++++
drivers/pwm/Makefile | 1 +
drivers/pwm/cros_ec_pwm.c | 82 +++++++++++++++++++++++++++++++++++++++
include/cros_ec.h | 13 +++++++
5 files changed, 119 insertions(+)
create mode 100644 drivers/pwm/cros_ec_pwm.c
diff --git a/drivers/misc/cros_ec.c b/drivers/misc/cros_ec.c
index a5534b1667..a9a1eb8a25 100644
--- a/drivers/misc/cros_ec.c
+++ b/drivers/misc/cros_ec.c
@@ -1110,6 +1110,20 @@ int cros_ec_battery_cutoff(struct udevice *dev, uint8_t flags)
return 0;
}
+int cros_ec_set_pwm_duty(struct udevice *dev, uint8_t index, uint16_t duty)
+{
+ struct ec_params_pwm_set_duty p;
+
+ p.duty = duty;
+ p.pwm_type = EC_PWM_TYPE_GENERIC;
+ p.index = index;
+
+ if (ec_command(dev, EC_CMD_PWM_SET_DUTY, 0, &p, sizeof(p),
+ NULL, 0) < 0)
+ return -1;
+ return 0;
+}
+
int cros_ec_set_ldo(struct udevice *dev, uint8_t index, uint8_t state)
{
struct ec_params_ldo_set params;
diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig
index 61eb468cde..73b0e5ed1e 100644
--- a/drivers/pwm/Kconfig
+++ b/drivers/pwm/Kconfig
@@ -9,6 +9,15 @@ config DM_PWM
frequency/period can be controlled along with the proportion of that
time that the signal is high.
+config PWM_CROS_EC
+ bool "Enable support for the Chrome OS EC PWM"
+ depends on DM_PWM
+ help
+ This PWM is found on several Chrome OS devices and controlled by
+ the Chrome OS embedded controller. It may be used to control the
+ screen brightness and/or the keyboard backlight depending on the
+ device.
+
config PWM_EXYNOS
bool "Enable support for the Exynos PWM"
depends on DM_PWM
diff --git a/drivers/pwm/Makefile b/drivers/pwm/Makefile
index 0f4e84b04d..7af13538de 100644
--- a/drivers/pwm/Makefile
+++ b/drivers/pwm/Makefile
@@ -10,6 +10,7 @@
obj-$(CONFIG_DM_PWM) += pwm-uclass.o
+obj-$(CONFIG_PWM_CROS_EC) += cros_ec_pwm.o
obj-$(CONFIG_PWM_EXYNOS) += exynos_pwm.o
obj-$(CONFIG_PWM_IMX) += pwm-imx.o pwm-imx-util.o
obj-$(CONFIG_PWM_MTK) += pwm-mtk.o
diff --git a/drivers/pwm/cros_ec_pwm.c b/drivers/pwm/cros_ec_pwm.c
new file mode 100644
index 0000000000..781f1a1eae
--- /dev/null
+++ b/drivers/pwm/cros_ec_pwm.c
@@ -0,0 +1,82 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+#include <common.h>
+#include <cros_ec.h>
+#include <dm.h>
+#include <errno.h>
+#include <log.h>
+#include <pwm.h>
+
+struct cros_ec_pwm_priv {
+ bool enabled;
+ uint duty;
+};
+
+static int cros_ec_pwm_set_config(struct udevice *dev, uint channel,
+ uint period_ns, uint duty_ns)
+{
+ struct cros_ec_pwm_priv *priv = dev_get_priv(dev);
+ uint duty;
+ int ret;
+
+ debug("%s: period_ns=%u, duty_ns=%u asked\n", __func__,
+ period_ns, duty_ns);
+
+ /* No way to set the period, only a relative duty cycle */
+ duty = EC_PWM_MAX_DUTY * duty_ns / period_ns;
+ if (duty > EC_PWM_MAX_DUTY)
+ duty = EC_PWM_MAX_DUTY;
+
+ if (!priv->enabled) {
+ priv->duty = duty;
+ debug("%s: duty=%#x to-be-set\n", __func__, duty);
+ return 0;
+ }
+
+ ret = cros_ec_set_pwm_duty(dev->parent, channel, duty);
+ if (ret) {
+ debug("%s: duty=%#x failed\n", __func__, duty);
+ return ret;
+ }
+
+ priv->duty = duty;
+ debug("%s: duty=%#x set\n", __func__, duty);
+ return 0;
+}
+
+static int cros_ec_pwm_set_enable(struct udevice *dev, uint channel,
+ bool enable)
+{
+ struct cros_ec_pwm_priv *priv = dev_get_priv(dev);
+ int ret;
+
+ ret = cros_ec_set_pwm_duty(dev->parent, channel,
+ enable ? priv->duty : 0);
+ if (ret) {
+ debug("%s: enable=%d failed\n", __func__, enable);
+ return ret;
+ }
+
+ priv->enabled = enable;
+ debug("%s: enable=%d (duty=%#x) set\n", __func__,
+ enable, priv->duty);
+ return 0;
+}
+
+static const struct pwm_ops cros_ec_pwm_ops = {
+ .set_config = cros_ec_pwm_set_config,
+ .set_enable = cros_ec_pwm_set_enable,
+};
+
+static const struct udevice_id cros_ec_pwm_ids[] = {
+ { .compatible = "google,cros-ec-pwm" },
+ { }
+};
+
+U_BOOT_DRIVER(cros_ec_pwm) = {
+ .name = "cros_ec_pwm",
+ .id = UCLASS_PWM,
+ .of_match = cros_ec_pwm_ids,
+ .ops = &cros_ec_pwm_ops,
+ .priv_auto_alloc_size = sizeof(struct cros_ec_pwm_priv),
+};
diff --git a/include/cros_ec.h b/include/cros_ec.h
index f4b9b7a5c2..202e5c2c74 100644
--- a/include/cros_ec.h
+++ b/include/cros_ec.h
@@ -443,6 +443,19 @@ int cros_ec_efs_verify(struct udevice *dev, enum ec_flash_region region);
*/
int cros_ec_battery_cutoff(struct udevice *dev, uint8_t flags);
+/**
+ * cros_ec_set_pwm_duty() - Set duty cycle of a generic pwm
+ *
+ * Note that duty value needs to be passed to the EC as a 16 bit number
+ * for increased precision.
+ *
+ * @param dev CROS-EC device
+ * @param index Index of the pwm
+ * @param duty Desired duty cycle, in 0..EC_PWM_MAX_DUTY range.
+ * @return 0 if OK, -ve on error
+ */
+int cros_ec_set_pwm_duty(struct udevice *dev, uint8_t index, uint16_t duty);
+
/**
* cros_ec_read_limit_power() - Check if power is limited by batter/charger
*
--
2.28.0
More information about the U-Boot
mailing list