[PATCH v4 5/8] clk: add clock driver for SCMI agents
Etienne Carriere
etienne.carriere at linaro.org
Wed Sep 9 18:44:04 CEST 2020
This change introduces a clock driver for SCMI agent devices. When
SCMI agent and SCMI clock drivers are enabled, SCMI agent binds a
clock device for each SCMI clock protocol devices enabled in the FDT.
SCMI clock driver is embedded upon CONFIG_CLK_SCMI=y. If enabled,
CONFIG_SCMI_AGENT is also enabled.
SCMI Clock protocol is defined in the SCMI specification [1].
Links: [1] https://developer.arm.com/architectures/system-architectures/software-standards/scmi
Signed-off-by: Etienne Carriere <etienne.carriere at linaro.org>
Cc: Lukasz Majewski <lukma at denx.de>
Cc: Simon Glass <sjg at chromium.org>
Cc: Peng Fan <peng.fan at nxp.com>
Cc: Sudeep Holla <sudeep.holla at arm.com>
---
Changes in v4:
- Condition DM_GET_DRIVER(scmi_clock) to IS_ENABLED(CONFIG_CLK_SCMI)
to prevent a build error (linker) when CONFIG_CLK_SCMI is disabled.
Changes in v3:
- Rebased in the series without major conflict.
Changes in v2:
- CONFIG_CLK_SCMI depends on CONFIG_SCMI_FIRMWARE instead of
selecting CONFIG_SCMI_FIRMWARE.
- Add inline comment description for structures and moves them to
source file top. Add/fixup some functions inline description comments.
- Replace rc with ret as return value local variable label.
- Fix scmi_clk_get_rate() return value to propagate error number.
- Fix scmi_clk_set_rate() to request synchronous rate set operation:
drop flag SCMI_CLK_RATE_ASYNC_NORESP in the SCMI message payload.
- Fix scmi_clk_set_rate() return value to return clock effective rate
on success.
---
drivers/clk/Kconfig | 8 ++
drivers/clk/Makefile | 1 +
drivers/clk/clk_scmi.c | 99 +++++++++++++++++++++++
drivers/firmware/scmi/scmi_agent-uclass.c | 14 +++-
include/scmi_protocols.h | 78 ++++++++++++++++++
5 files changed, 197 insertions(+), 3 deletions(-)
create mode 100644 drivers/clk/clk_scmi.c
diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
index 6003e140b5..4dfbad7986 100644
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -159,6 +159,14 @@ config CLK_CDCE9XX
Enable the clock synthesizer driver for CDCE913/925/937/949
series of chips.
+config CLK_SCMI
+ bool "Enable SCMI clock driver"
+ depends on SCMI_FIRMWARE
+ help
+ Enable this option if you want to support clock devices exposed
+ by a SCMI agent based on SCMI clock protocol communication
+ with a SCMI server.
+
source "drivers/clk/analogbits/Kconfig"
source "drivers/clk/at91/Kconfig"
source "drivers/clk/exynos/Kconfig"
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index cda4b4b605..d1e295ac7c 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -32,6 +32,7 @@ obj-$(CONFIG_CLK_MPC83XX) += mpc83xx_clk.o
obj-$(CONFIG_CLK_OCTEON) += clk_octeon.o
obj-$(CONFIG_CLK_OWL) += owl/
obj-$(CONFIG_CLK_RENESAS) += renesas/
+obj-$(CONFIG_CLK_SCMI) += clk_scmi.o
obj-$(CONFIG_CLK_SIFIVE) += sifive/
obj-$(CONFIG_ARCH_SUNXI) += sunxi/
obj-$(CONFIG_CLK_STM32F) += clk_stm32f.o
diff --git a/drivers/clk/clk_scmi.c b/drivers/clk/clk_scmi.c
new file mode 100644
index 0000000000..93a4819501
--- /dev/null
+++ b/drivers/clk/clk_scmi.c
@@ -0,0 +1,99 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019-2020 Linaro Limited
+ */
+#include <common.h>
+#include <clk-uclass.h>
+#include <dm.h>
+#include <scmi_agent.h>
+#include <scmi_protocols.h>
+#include <asm/types.h>
+
+static int scmi_clk_gate(struct clk *clk, int enable)
+{
+ struct scmi_clk_state_in in = {
+ .clock_id = clk->id,
+ .attributes = enable,
+ };
+ struct scmi_clk_state_out out;
+ struct scmi_msg msg = SCMI_MSG_IN(SCMI_PROTOCOL_ID_CLOCK,
+ SCMI_CLOCK_CONFIG_SET,
+ in, out);
+ int ret;
+
+ ret = devm_scmi_process_msg(clk->dev->parent, &msg);
+ if (ret)
+ return ret;
+
+ return scmi_to_linux_errno(out.status);
+}
+
+static int scmi_clk_enable(struct clk *clk)
+{
+ return scmi_clk_gate(clk, 1);
+}
+
+static int scmi_clk_disable(struct clk *clk)
+{
+ return scmi_clk_gate(clk, 0);
+}
+
+static ulong scmi_clk_get_rate(struct clk *clk)
+{
+ struct scmi_clk_rate_get_in in = {
+ .clock_id = clk->id,
+ };
+ struct scmi_clk_rate_get_out out;
+ struct scmi_msg msg = SCMI_MSG_IN(SCMI_PROTOCOL_ID_CLOCK,
+ SCMI_CLOCK_RATE_GET,
+ in, out);
+ int ret;
+
+ ret = devm_scmi_process_msg(clk->dev->parent, &msg);
+ if (ret < 0)
+ return ret;
+
+ ret = scmi_to_linux_errno(out.status);
+ if (ret < 0)
+ return ret;
+
+ return (ulong)(((u64)out.rate_msb << 32) | out.rate_lsb);
+}
+
+static ulong scmi_clk_set_rate(struct clk *clk, ulong rate)
+{
+ struct scmi_clk_rate_set_in in = {
+ .clock_id = clk->id,
+ .flags = SCMI_CLK_RATE_ROUND_CLOSEST,
+ .rate_lsb = (u32)rate,
+ .rate_msb = (u32)((u64)rate >> 32),
+ };
+ struct scmi_clk_rate_set_out out;
+ struct scmi_msg msg = SCMI_MSG_IN(SCMI_PROTOCOL_ID_CLOCK,
+ SCMI_CLOCK_RATE_SET,
+ in, out);
+ int ret;
+
+ ret = devm_scmi_process_msg(clk->dev->parent, &msg);
+ if (ret < 0)
+ return ret;
+
+ ret = scmi_to_linux_errno(out.status);
+ if (ret < 0)
+ return ret;
+
+ return scmi_clk_get_rate(clk);
+}
+
+static const struct clk_ops scmi_clk_ops = {
+ .enable = scmi_clk_enable,
+ .disable = scmi_clk_disable,
+ .get_rate = scmi_clk_get_rate,
+ .set_rate = scmi_clk_set_rate,
+};
+
+U_BOOT_DRIVER(scmi_clock) = {
+ .name = "scmi_clk",
+ .id = UCLASS_CLK,
+ .ops = &scmi_clk_ops,
+};
diff --git a/drivers/firmware/scmi/scmi_agent-uclass.c b/drivers/firmware/scmi/scmi_agent-uclass.c
index 67a6f907c9..1f36f23b6d 100644
--- a/drivers/firmware/scmi/scmi_agent-uclass.c
+++ b/drivers/firmware/scmi/scmi_agent-uclass.c
@@ -58,9 +58,9 @@ static int scmi_bind_protocols(struct udevice *dev)
{
int ret = 0;
ofnode node;
- struct driver *drv;
dev_for_each_subnode(node, dev) {
+ struct driver *drv = NULL;
u32 protocol_id;
if (!ofnode_is_available(node))
@@ -70,9 +70,17 @@ static int scmi_bind_protocols(struct udevice *dev)
continue;
switch (protocol_id) {
+ case SCMI_PROTOCOL_ID_CLOCK:
+ if (IS_ENABLED(CONFIG_CLK_SCMI))
+ drv = DM_GET_DRIVER(scmi_clock);
+ break;
default:
- dev_info(dev, "Ignore unsupported SCMI protocol %#x\n",
- protocol_id);
+ break;
+ }
+
+ if (!drv) {
+ dev_dbg(dev, "Ignore unsupported SCMI protocol %#x\n",
+ protocol_id);
continue;
}
diff --git a/include/scmi_protocols.h b/include/scmi_protocols.h
index 86a2d109c8..4778bcfc47 100644
--- a/include/scmi_protocols.h
+++ b/include/scmi_protocols.h
@@ -7,6 +7,7 @@
#define _SCMI_PROTOCOLS_H
#include <linux/bitops.h>
+#include <asm/types.h>
/*
* Subset the SCMI protocols definition
@@ -38,4 +39,81 @@ enum scmi_status_code {
SCMI_PROTOCOL_ERROR = -10,
};
+/*
+ * SCMI Clock Protocol
+ */
+
+enum scmi_clock_message_id {
+ SCMI_CLOCK_RATE_SET = 0x5,
+ SCMI_CLOCK_RATE_GET = 0x6,
+ SCMI_CLOCK_CONFIG_SET = 0x7,
+};
+
+#define SCMI_CLK_RATE_ASYNC_NOTIFY BIT(0)
+#define SCMI_CLK_RATE_ASYNC_NORESP (BIT(0) | BIT(1))
+#define SCMI_CLK_RATE_ROUND_DOWN 0
+#define SCMI_CLK_RATE_ROUND_UP BIT(2)
+#define SCMI_CLK_RATE_ROUND_CLOSEST BIT(3)
+
+/**
+ * struct scmi_clk_state_in - Message payload for CLOCK_CONFIG_SET command
+ * @clock_id: SCMI clock ID
+ * @attributes: Attributes of the targets clock state
+ */
+struct scmi_clk_state_in {
+ u32 clock_id;
+ u32 attributes;
+};
+
+/**
+ * struct scmi_clk_state_out - Response payload for CLOCK_CONFIG_SET command
+ * @status: SCMI command status
+ */
+struct scmi_clk_state_out {
+ s32 status;
+};
+
+/**
+ * struct scmi_clk_state_in - Message payload for CLOCK_RATE_GET command
+ * @clock_id: SCMI clock ID
+ * @attributes: Attributes of the targets clock state
+ */
+struct scmi_clk_rate_get_in {
+ u32 clock_id;
+};
+
+/**
+ * struct scmi_clk_rate_get_out - Response payload for CLOCK_RATE_GET command
+ * @status: SCMI command status
+ * @rate_lsb: 32bit LSB of the clock rate in Hertz
+ * @rate_msb: 32bit MSB of the clock rate in Hertz
+ */
+struct scmi_clk_rate_get_out {
+ s32 status;
+ u32 rate_lsb;
+ u32 rate_msb;
+};
+
+/**
+ * struct scmi_clk_state_in - Message payload for CLOCK_RATE_SET command
+ * @clock_id: SCMI clock ID
+ * @flags: Flags for the clock rate set request
+ * @rate_lsb: 32bit LSB of the clock rate in Hertz
+ * @rate_msb: 32bit MSB of the clock rate in Hertz
+ */
+struct scmi_clk_rate_set_in {
+ u32 clock_id;
+ u32 flags;
+ u32 rate_lsb;
+ u32 rate_msb;
+};
+
+/**
+ * struct scmi_clk_rate_set_out - Response payload for CLOCK_RATE_SET command
+ * @status: SCMI command status
+ */
+struct scmi_clk_rate_set_out {
+ s32 status;
+};
+
#endif /* _SCMI_PROTOCOLS_H */
--
2.17.1
More information about the U-Boot
mailing list