[PATCH 0/4] amlogic: vim3: add support for dynamic PCIe enable

[Neil Armstrong]

The VIM3 on-board  MCU can mux the PCIe/USB3.0 shared differential
lines using a FUSB340TMX USB 3.1 SuperSpeed Data Switch between
an USB3.0 Type A connector and a M.2 Key M slot.
The PHY driving these differential lines is shared between
the USB3.0 controller and the PCIe Controller, thus only
a single controller can use it.

This serie adds a VIM3 specific board support and adds this dynamic
switching right before booting Linux.

Neil Armstrong (4):
  ARM: dts: sync amlogic G12A/SM1 DT from Linux 5.9-rc1
  board: amlogic: add a vim3 specific board support
  configs: vim3: use the vim3 board support
  board: amlogic: vim3: add support for dynamic PCIe enable

 arch/arm/dts/meson-g12-common.dtsi            |  55 ++++---
 arch/arm/dts/meson-g12b-odroid-n2.dts         | 136 +++++++++++++++++-
 arch/arm/dts/meson-khadas-vim3.dtsi           |  26 +++-
 arch/arm/dts/meson-sm1-khadas-vim3l.dts       |  92 ++++++++++++
 arch/arm/dts/meson-sm1-odroid-c4.dts          |  88 ++++++++++++
 board/amlogic/vim3/MAINTAINERS                |   9 ++
 board/amlogic/vim3/Makefile                   |   6 +
 board/amlogic/vim3/vim3.c                     | 136 ++++++++++++++++++
 board/amlogic/w400/MAINTAINERS                |   4 -
 configs/khadas-vim3_defconfig                 |   5 +-
 configs/khadas-vim3l_defconfig                |   5 +-
 include/dt-bindings/clock/g12a-clkc.h         |   2 +
 .../dt-bindings/sound/meson-g12a-toacodec.h   |  10 ++
 13 files changed, 544 insertions(+), 30 deletions(-)
 create mode 100644 board/amlogic/vim3/MAINTAINERS
 create mode 100644 board/amlogic/vim3/Makefile
 create mode 100644 board/amlogic/vim3/vim3.c
 create mode 100644 include/dt-bindings/sound/meson-g12a-toacodec.h

-- 
2.22.0