[PATCH v3 7/7] riscv: Add some comments to start.S

[Heinrich Schuchardt]

On 21.09.20 13:51, Sean Anderson wrote:
> This adds comments regarding the ordering and purpose of certain
> instructions as I understand them.
>
> Signed-off-by: Sean Anderson <seanga2 at gmail.com>
> Reviewed-by: Bin Meng <bin.meng at windriver.com>
> Reviewed-by: Rick Chen <rick at andestech.com>
> Reviewed-by: Leo Liang <ycliang at andestech.com>
> ---
>
> (no changes since v2)
>
> Changes in v2:
> - Clarify comments regarding tp
>
>  arch/riscv/cpu/start.S | 19 +++++++++++++++++--
>  1 file changed, 17 insertions(+), 2 deletions(-)
>
> diff --git a/arch/riscv/cpu/start.S b/arch/riscv/cpu/start.S
> index eb852538ca..bbc737ed9a 100644
> --- a/arch/riscv/cpu/start.S
> +++ b/arch/riscv/cpu/start.S
> @@ -43,7 +43,10 @@ _start:
>  	csrr	a0, CSR_MHARTID
>  #endif
>
> -	/* save hart id and dtb pointer */
> +	/*
> +	 * Save hart id and dtb pointer. The thread pointer register is not
> +	 * modified by C code. It is used by secondary_hart_loop.
> +	 */
>  	mv	tp, a0
>  	mv	s1, a1

I would like to understand the implications for the UEFI sub-system.

The current design only takes care of the conservation of the global
data gd.

When U-Boot calls a UEFI payload it saves the value of gd (register gp,
x3) in a variable.

When the payload calls the UEFI API implemented in U-Boot we store the
payload's value of register gp and restore the U-Boot value (see macro
EFI_ENTRY).

Before returning from the UEFI call we restore the payload's value of gp
(see macro EFI_EXIT).

When a payload returns to the U-Boot shell we restore gp.

Up to now we do not take care of any other register. I am not aware of
any specification requiring register tp to be conserved by the UEFI payload.

Is there any other register that has to be conserved except gp?

Best regards

Heinrich

>
> @@ -54,10 +57,18 @@ _start:
>  	 */
>  	mv	gp, zero
>
> +	/*
> +	 * Set the trap handler. This must happen after initializing gp because
> +	 * the handler may use it.
> +	 */
>  	la	t0, trap_entry
>  	csrw	MODE_PREFIX(tvec), t0
>
> -	/* mask all interrupts */
> +	/*
> +	 * Mask all interrupts. Interrupts are disabled globally (in m/sstatus)
> +	 * for U-Boot, but we will need to read m/sip to determine if we get an
> +	 * IPI
> +	 */
>  	csrw	MODE_PREFIX(ie), zero
>
>  #if CONFIG_IS_ENABLED(SMP)
> @@ -412,6 +423,10 @@ secondary_hart_relocate:
>  	mv	gp, a2
>  #endif
>
> +/*
> + * Interrupts are disabled globally, but they can still be read from m/sip. The
> + * wfi function will wake us up if we get an IPI, even if we do not trap.
> + */
>  secondary_hart_loop:
>  	wfi
>
>