[PATCH] arm: mvebu: Espressobin: Instructions for more MAC addresses in README.marvell
Andre Heider
a.heider at gmail.com
Sat Sep 26 11:30:15 CEST 2020
On 26/09/2020 11:26, Pali Rohár wrote:
> On Saturday 26 September 2020 11:16:12 Andre Heider wrote:
>> On 25/09/2020 09:54, Pali Rohár wrote:
>>> Some Espressobin boards got assigned more than one MAC address. Update
>>> instructions how to correctly store and preserve all MAC addresses.
>>>
>>> Signed-off-by: Pali Rohár <pali at kernel.org>
>>> ---
>>> doc/README.marvell | 23 +++++++++++++++++------
>>> 1 file changed, 17 insertions(+), 6 deletions(-)
>>>
>>> diff --git a/doc/README.marvell b/doc/README.marvell
>>> index 5416bc3035..6fc5ac8a40 100644
>>> --- a/doc/README.marvell
>>> +++ b/doc/README.marvell
>>> @@ -27,7 +27,7 @@ Build Procedure
>>> - For the Armada-70x0/80x0 DB board use "mvebu_db_armada8k_defconfig"
>>> - For the Armada-80x0 MacchiatoBin use "make mvebu_mcbin-88f8040_defconfig"
>>> - For the Armada-3700 DB board use "make mvebu_db-88f3720_defconfig"
>>> - - For the Armada-3700 EsspressoBin use "make mvebu_espressobin-88f3720_defconfig"
>>> + - For the Armada-3700 EspressoBin use "make mvebu_espressobin-88f3720_defconfig"
>>> 5. Configure the device-tree and build the U-Boot image:
>>> @@ -62,11 +62,15 @@ Configuration update
>>> Permanent ethernet MAC address
>>> -------------------------------
>>> Prior flashing new U-Boot version (as part of ATF image) it is suggested to backup
>>> - permanent ethernet MAC address as it is stored only in U-Boot env storage (SPI or eMMC).
>>> - Some boards like EspressoBin have MAC address printed on sticker. To print current MAC
>>> - address run:
>>> + permanent ethernet MAC addresses as they are stored only in U-Boot env storage (SPI or eMMC).
>>> + Some boards like EspressoBin have MAC addresses printed on sticker. Some boards got assigned
>>> + only one address other may also more than one. To print current MAC addresses run:
>>> # echo $ethaddr
>>> + # echo $eth1addr
>>> + # echo $eth2addr
>>> + # echo $eth3addr
>>> + # ...
>>> MAC addresses 00:51:82:11:22:00, 00:51:82:11:22:01, 00:51:82:11:22:02, 00:51:82:11:22:03
>>> and F0:AD:4E:03:64:7F are default hardcoded values found in Marvell's and Armbian U-Boot
>>> @@ -75,13 +79,20 @@ Permanent ethernet MAC address
>>> suggested to generate new random one.
>>> After flashing new U-Boot version it is suggested to reset U-Boot env variables to default
>>> - and then set correct permanent ethernet MAC address.
>>> + and then set correct permanent ethernet MAC addresses.
>>> # env default -a
>>> # setenv ethaddr XX:XX:XX:XX:XX:XX
>>> + # setenv eth1addr XX:XX:XX:XX:XX:XX
>>> + # setenv eth2addr YY:YY:YY:YY:YY:YY
>>> + # setenv eth3addr ZZ:ZZ:ZZ:ZZ:ZZ:ZZ
>>> + # ...
>>> # saveenv
>>> - Where XX:XX:XX:XX:XX:XX is permanent ethernet MAC address.
>>> + Where value for ethaddr is required permanent ethernet MAC address and values for ethNaddr
>>> + are optional per-port MAC addresses. When optional ethNaddr variables are not defined then
>>> + they are inherited from required ethaddr variable. eth1addr contains MAC address for the
>>> + wan port, other for particular lan ports.
>>
>> I never tried, what does "inherit" mean? eth1addr=$ethaddr+1 and so on?
>
> It means that address for DSA port is same as address for main ethernet adapter (ethaddr). So ethNaddr = $ethaddr
Okay, nice.
>
>> And would port1=wan be correct for v7?
>
> Yes.
>
> https://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu.git/diff/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts?h=for-next&id=b64d814257b027e29a474bcd660f6372490138c7
>
> eth1addr is set to ethernet1 and ethernet1 is alias for &switch0port3 for V7. And switch0port3 is wan on V7.
For Linux, yes. But I meant u-boot, we don't have a v7 dts there.
Doesn't that matter?
>
>>> Recent Linux kernel versions use correct permanent ethernet MAC address from U-Boot env as
>>> U-Boot will inject it into kernel's device-tree.
>>>
>>
More information about the U-Boot
mailing list