[PATCH 5/5] arm: mach-omap2: am33xx: Add device structure for spi

Faiz Abbas faiz_abbas at ti.com
Mon Sep 7 12:32:31 CEST 2020


Hi Vignesh,

On 07/09/20 1:48 pm, Vignesh Raghavendra wrote:
> 
> 
> On 9/7/20 12:36 PM, Faiz Abbas wrote:
>> Hi Lokesh,
>>
>> On 07/09/20 12:08 pm, Lokesh Vutla wrote:
>>>
>>>
>>> On 02/09/20 4:48 pm, Faiz Abbas wrote:
>>>> Add platform data and a device structure for the spi device
>>>> present on am335x-icev2. This requires moving all omap3_spi
>>>> platform data structures and symbols to an omap3_spi.h so that
>>>> the board file can access them.
>>>>
>>>> Signed-off-by: Faiz Abbas <faiz_abbas at ti.com>
>>>> ---
>>>>  arch/arm/mach-omap2/am33xx/board.c | 12 +++++
>>>>  drivers/spi/omap3_spi.c            | 70 +--------------------------
>>>>  include/configs/am335x_evm.h       |  4 ++
>>>>  include/omap3_spi.h                | 78 ++++++++++++++++++++++++++++++
>>>>  4 files changed, 95 insertions(+), 69 deletions(-)
>>>>  create mode 100644 include/omap3_spi.h
>>>>
>>>> diff --git a/arch/arm/mach-omap2/am33xx/board.c b/arch/arm/mach-omap2/am33xx/board.c
>>>> index a7b56b6bb3..2c2b38721f 100644
>>>> --- a/arch/arm/mach-omap2/am33xx/board.c
>>>> +++ b/arch/arm/mach-omap2/am33xx/board.c
>>>> @@ -14,6 +14,7 @@
>>>>  #include <init.h>
>>>>  #include <net.h>
>>>>  #include <ns16550.h>
>>>> +#include <omap3_spi.h>
>>>>  #include <spl.h>
>>>>  #include <asm/arch/cpu.h>
>>>>  #include <asm/arch/hardware.h>
>>>> @@ -142,6 +143,17 @@ U_BOOT_DEVICES(am33xx_gpios) = {
>>>>  #endif
>>>>  };
>>>>  #endif
>>>> +#if CONFIG_IS_ENABLED(DM_SPI) && !CONFIG_IS_ENABLED(OF_CONTROL)
>>>> +static const struct omap3_spi_plat omap3_spi_pdata = {
>>>> +	.regs = (struct mcspi *)AM33XX_SPI_OFFSET,
>>>> +	.pin_dir = MCSPI_PINDIR_D0_IN_D1_OUT,
>>>> +};
>>>> +
>>>> +U_BOOT_DEVICE(am33xx_spi) = {
>>>> +	.name = "omap3_spi",
>>>> +	.platdata = &omap3_spi_pdata,
>>>> +};
>>>> +#endif
>>>>  #endif
>>>>  
>>>>  #if !CONFIG_IS_ENABLED(DM_GPIO)
>>>> diff --git a/drivers/spi/omap3_spi.c b/drivers/spi/omap3_spi.c
>>>> index 08daacf6f0..56cb217486 100644
>>>> --- a/drivers/spi/omap3_spi.c
>>>> +++ b/drivers/spi/omap3_spi.c
>>>> @@ -22,82 +22,14 @@
>>>>  #include <malloc.h>
>>>>  #include <asm/io.h>
>>>>  #include <linux/bitops.h>
>>>> +#include <omap3_spi.h>
>>>>  
>>>>  DECLARE_GLOBAL_DATA_PTR;
>>>>  
>>>> -#define OMAP4_MCSPI_REG_OFFSET	0x100
>>>> -
>>>>  struct omap2_mcspi_platform_config {
>>>>  	unsigned int regs_offset;
>>>>  };
>>>>  
>>>> -/* per-register bitmasks */
>>>> -#define OMAP3_MCSPI_SYSCONFIG_SMARTIDLE (2 << 3)
>>>> -#define OMAP3_MCSPI_SYSCONFIG_ENAWAKEUP BIT(2)
>>>> -#define OMAP3_MCSPI_SYSCONFIG_AUTOIDLE	BIT(0)
>>>> -#define OMAP3_MCSPI_SYSCONFIG_SOFTRESET BIT(1)
>>>> -
>>>> -#define OMAP3_MCSPI_SYSSTATUS_RESETDONE BIT(0)
>>>> -
>>>> -#define OMAP3_MCSPI_MODULCTRL_SINGLE	BIT(0)
>>>> -#define OMAP3_MCSPI_MODULCTRL_MS	BIT(2)
>>>> -#define OMAP3_MCSPI_MODULCTRL_STEST	BIT(3)
>>>> -
>>>> -#define OMAP3_MCSPI_CHCONF_PHA		BIT(0)
>>>> -#define OMAP3_MCSPI_CHCONF_POL		BIT(1)
>>>> -#define OMAP3_MCSPI_CHCONF_CLKD_MASK	GENMASK(5, 2)
>>>> -#define OMAP3_MCSPI_CHCONF_EPOL		BIT(6)
>>>> -#define OMAP3_MCSPI_CHCONF_WL_MASK	GENMASK(11, 7)
>>>> -#define OMAP3_MCSPI_CHCONF_TRM_RX_ONLY	BIT(12)
>>>> -#define OMAP3_MCSPI_CHCONF_TRM_TX_ONLY	BIT(13)
>>>> -#define OMAP3_MCSPI_CHCONF_TRM_MASK	GENMASK(13, 12)
>>>> -#define OMAP3_MCSPI_CHCONF_DMAW		BIT(14)
>>>> -#define OMAP3_MCSPI_CHCONF_DMAR		BIT(15)
>>>> -#define OMAP3_MCSPI_CHCONF_DPE0		BIT(16)
>>>> -#define OMAP3_MCSPI_CHCONF_DPE1		BIT(17)
>>>> -#define OMAP3_MCSPI_CHCONF_IS		BIT(18)
>>>> -#define OMAP3_MCSPI_CHCONF_TURBO	BIT(19)
>>>> -#define OMAP3_MCSPI_CHCONF_FORCE	BIT(20)
>>>> -
>>>> -#define OMAP3_MCSPI_CHSTAT_RXS		BIT(0)
>>>> -#define OMAP3_MCSPI_CHSTAT_TXS		BIT(1)
>>>> -#define OMAP3_MCSPI_CHSTAT_EOT		BIT(2)
>>>> -
>>>> -#define OMAP3_MCSPI_CHCTRL_EN		BIT(0)
>>>> -#define OMAP3_MCSPI_CHCTRL_DIS		(0 << 0)
>>>> -
>>>> -#define OMAP3_MCSPI_WAKEUPENABLE_WKEN	BIT(0)
>>>> -#define MCSPI_PINDIR_D0_IN_D1_OUT	0
>>>> -#define MCSPI_PINDIR_D0_OUT_D1_IN	1
>>>> -
>>>> -#define OMAP3_MCSPI_MAX_FREQ		48000000
>>>> -#define SPI_WAIT_TIMEOUT		10
>>>> -
>>>> -/* OMAP3 McSPI registers */
>>>> -struct mcspi_channel {
>>>> -	unsigned int chconf;		/* 0x2C, 0x40, 0x54, 0x68 */
>>>> -	unsigned int chstat;		/* 0x30, 0x44, 0x58, 0x6C */
>>>> -	unsigned int chctrl;		/* 0x34, 0x48, 0x5C, 0x70 */
>>>> -	unsigned int tx;		/* 0x38, 0x4C, 0x60, 0x74 */
>>>> -	unsigned int rx;		/* 0x3C, 0x50, 0x64, 0x78 */
>>>> -};
>>>> -
>>>> -struct mcspi {
>>>> -	unsigned char res1[0x10];
>>>> -	unsigned int sysconfig;		/* 0x10 */
>>>> -	unsigned int sysstatus;		/* 0x14 */
>>>> -	unsigned int irqstatus;		/* 0x18 */
>>>> -	unsigned int irqenable;		/* 0x1C */
>>>> -	unsigned int wakeupenable;	/* 0x20 */
>>>> -	unsigned int syst;		/* 0x24 */
>>>> -	unsigned int modulctrl;		/* 0x28 */
>>>> -	struct mcspi_channel channel[4];
>>>> -	/* channel0: 0x2C - 0x3C, bus 0 & 1 & 2 & 3 */
>>>> -	/* channel1: 0x40 - 0x50, bus 0 & 1 */
>>>> -	/* channel2: 0x54 - 0x64, bus 0 & 1 */
>>>> -	/* channel3: 0x68 - 0x78, bus 0 */
>>>> -};
>>>> -
>>>>  struct omap3_spi_priv {
>>>>  	struct mcspi *regs;
>>>>  	unsigned int cs;
>>>> diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h
>>>> index 9c4ef369c5..db1a89ad30 100644
>>>> --- a/include/configs/am335x_evm.h
>>>> +++ b/include/configs/am335x_evm.h
>>>> @@ -281,6 +281,10 @@
>>>>  #endif
>>>>  
>>>>  /* SPI flash. */
>>>> +#if CONFIG_IS_ENABLED(DM_SPI)
>>>> +#define AM33XX_SPI_BASE		0x48030000
> 
> Could this be more specific? AM33XX_SPI<instance num>_BASE?

Isn't there only one McSPI instance in am335x?

> 
>>>> +#define AM33XX_SPI_OFFSET	(AM33XX_SPI_BASE + OMAP4_MCSPI_REG_OFFSET)
>>>
>>> Can we get the SPI base from DT?
>>>
>>
>> We are doing that in U-boot (see the ofdata_to_platdata() callback in patch 4).
>> We need hardcoded static platdata for SPL. Was this not clear from the commit
>> message?
>>
> 
> Then why not move these defines to arch/arm/mach-omap2/am33xx/board.c as
> well?

All the other base addresses used in arch/arm/mach-omap2/am33xx/board.c are included
from here. For example see UART platdata (struct ns16550_platdata am33xx_serial[]).

Thanks,
Faiz


More information about the U-Boot mailing list