[PATCH 03/16] Kconfig: Move boot timing under boot options
Simon Glass
sjg at chromium.org
Fri Sep 11 04:21:14 CEST 2020
This relates to booting, so move it under the boot menu.
Signed-off-by: Simon Glass <sjg at chromium.org>
---
common/Kconfig | 291 --------------------------------------------
common/Kconfig.boot | 291 ++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 291 insertions(+), 291 deletions(-)
diff --git a/common/Kconfig b/common/Kconfig
index 42be92ec7a7..58363b901a2 100644
--- a/common/Kconfig
+++ b/common/Kconfig
@@ -1,296 +1,5 @@
source "common/Kconfig.boot"
-menu "Boot timing"
-
-config BOOTSTAGE
- bool "Boot timing and reporting"
- help
- Enable recording of boot time while booting. To use it, insert
- calls to bootstage_mark() with a suitable BOOTSTAGE_ID from
- bootstage.h. Only a single entry is recorded for each ID. You can
- give the entry a name with bootstage_mark_name(). You can also
- record elapsed time in a particular stage using bootstage_start()
- before starting and bootstage_accum() when finished. Bootstage will
- add up all the accumulated time and report it.
-
- Normally, IDs are defined in bootstage.h but a small number of
- additional 'user' IDs can be used by passing BOOTSTAGE_ID_ALLOC
- as the ID.
-
- Calls to show_boot_progress() will also result in log entries but
- these will not have names.
-
-config SPL_BOOTSTAGE
- bool "Boot timing and reported in SPL"
- depends on BOOTSTAGE
- help
- Enable recording of boot time in SPL. To make this visible to U-Boot
- proper, enable BOOTSTAGE_STASH as well. This will stash the timing
- information when SPL finishes and load it when U-Boot proper starts
- up.
-
-config TPL_BOOTSTAGE
- bool "Boot timing and reported in TPL"
- depends on BOOTSTAGE
- help
- Enable recording of boot time in SPL. To make this visible to U-Boot
- proper, enable BOOTSTAGE_STASH as well. This will stash the timing
- information when TPL finishes and load it when U-Boot proper starts
- up.
-
-config BOOTSTAGE_REPORT
- bool "Display a detailed boot timing report before booting the OS"
- depends on BOOTSTAGE
- help
- Enable output of a boot time report just before the OS is booted.
- This shows how long it took U-Boot to go through each stage of the
- boot process. The report looks something like this:
-
- Timer summary in microseconds:
- Mark Elapsed Stage
- 0 0 reset
- 3,575,678 3,575,678 board_init_f start
- 3,575,695 17 arch_cpu_init A9
- 3,575,777 82 arch_cpu_init done
- 3,659,598 83,821 board_init_r start
- 3,910,375 250,777 main_loop
- 29,916,167 26,005,792 bootm_start
- 30,361,327 445,160 start_kernel
-
-config BOOTSTAGE_RECORD_COUNT
- int "Number of boot stage records to store"
- default 30
- help
- This is the size of the bootstage record list and is the maximum
- number of bootstage records that can be recorded.
-
-config SPL_BOOTSTAGE_RECORD_COUNT
- int "Number of boot stage records to store for SPL"
- default 5
- help
- This is the size of the bootstage record list and is the maximum
- number of bootstage records that can be recorded.
-
-config TPL_BOOTSTAGE_RECORD_COUNT
- int "Number of boot stage records to store for TPL"
- default 5
- help
- This is the size of the bootstage record list and is the maximum
- number of bootstage records that can be recorded.
-
-config BOOTSTAGE_FDT
- bool "Store boot timing information in the OS device tree"
- depends on BOOTSTAGE
- help
- Stash the bootstage information in the FDT. A root 'bootstage'
- node is created with each bootstage id as a child. Each child
- has a 'name' property and either 'mark' containing the
- mark time in microseconds, or 'accum' containing the
- accumulated time for that bootstage id in microseconds.
- For example:
-
- bootstage {
- 154 {
- name = "board_init_f";
- mark = <3575678>;
- };
- 170 {
- name = "lcd";
- accum = <33482>;
- };
- };
-
- Code in the Linux kernel can find this in /proc/devicetree.
-
-config BOOTSTAGE_STASH
- bool "Stash the boot timing information in memory before booting OS"
- depends on BOOTSTAGE
- help
- Some OSes do not support device tree. Bootstage can instead write
- the boot timing information in a binary format at a given address.
- This happens through a call to bootstage_stash(), typically in
- the CPU's cleanup_before_linux() function. You can use the
- 'bootstage stash' and 'bootstage unstash' commands to do this on
- the command line.
-
-config BOOTSTAGE_STASH_ADDR
- hex "Address to stash boot timing information"
- default 0
- help
- Provide an address which will not be overwritten by the OS when it
- starts, so that it can read this information when ready.
-
-config BOOTSTAGE_STASH_SIZE
- hex "Size of boot timing stash region"
- default 0x1000
- help
- This should be large enough to hold the bootstage stash. A value of
- 4096 (4KiB) is normally plenty.
-
-config SHOW_BOOT_PROGRESS
- bool "Show boot progress in a board-specific manner"
- help
- Defining this option allows to add some board-specific code (calling
- a user-provided function show_boot_progress(int) that enables you to
- show the system's boot progress on some display (for example, some
- LEDs) on your board. At the moment, the following checkpoints are
- implemented:
-
- Legacy uImage format:
-
- Arg Where When
- 1 common/cmd_bootm.c before attempting to boot an image
- -1 common/cmd_bootm.c Image header has bad magic number
- 2 common/cmd_bootm.c Image header has correct magic number
- -2 common/cmd_bootm.c Image header has bad checksum
- 3 common/cmd_bootm.c Image header has correct checksum
- -3 common/cmd_bootm.c Image data has bad checksum
- 4 common/cmd_bootm.c Image data has correct checksum
- -4 common/cmd_bootm.c Image is for unsupported architecture
- 5 common/cmd_bootm.c Architecture check OK
- -5 common/cmd_bootm.c Wrong Image Type (not kernel, multi)
- 6 common/cmd_bootm.c Image Type check OK
- -6 common/cmd_bootm.c gunzip uncompression error
- -7 common/cmd_bootm.c Unimplemented compression type
- 7 common/cmd_bootm.c Uncompression OK
- 8 common/cmd_bootm.c No uncompress/copy overwrite error
- -9 common/cmd_bootm.c Unsupported OS (not Linux, BSD, VxWorks, QNX)
-
- 9 common/image.c Start initial ramdisk verification
- -10 common/image.c Ramdisk header has bad magic number
- -11 common/image.c Ramdisk header has bad checksum
- 10 common/image.c Ramdisk header is OK
- -12 common/image.c Ramdisk data has bad checksum
- 11 common/image.c Ramdisk data has correct checksum
- 12 common/image.c Ramdisk verification complete, start loading
- -13 common/image.c Wrong Image Type (not PPC Linux ramdisk)
- 13 common/image.c Start multifile image verification
- 14 common/image.c No initial ramdisk, no multifile, continue.
-
- 15 arch/<arch>/lib/bootm.c All preparation done, transferring control to OS
-
- -30 arch/powerpc/lib/board.c Fatal error, hang the system
- -31 post/post.c POST test failed, detected by post_output_backlog()
- -32 post/post.c POST test failed, detected by post_run_single()
-
- 34 common/cmd_doc.c before loading a Image from a DOC device
- -35 common/cmd_doc.c Bad usage of "doc" command
- 35 common/cmd_doc.c correct usage of "doc" command
- -36 common/cmd_doc.c No boot device
- 36 common/cmd_doc.c correct boot device
- -37 common/cmd_doc.c Unknown Chip ID on boot device
- 37 common/cmd_doc.c correct chip ID found, device available
- -38 common/cmd_doc.c Read Error on boot device
- 38 common/cmd_doc.c reading Image header from DOC device OK
- -39 common/cmd_doc.c Image header has bad magic number
- 39 common/cmd_doc.c Image header has correct magic number
- -40 common/cmd_doc.c Error reading Image from DOC device
- 40 common/cmd_doc.c Image header has correct magic number
- 41 common/cmd_ide.c before loading a Image from a IDE device
- -42 common/cmd_ide.c Bad usage of "ide" command
- 42 common/cmd_ide.c correct usage of "ide" command
- -43 common/cmd_ide.c No boot device
- 43 common/cmd_ide.c boot device found
- -44 common/cmd_ide.c Device not available
- 44 common/cmd_ide.c Device available
- -45 common/cmd_ide.c wrong partition selected
- 45 common/cmd_ide.c partition selected
- -46 common/cmd_ide.c Unknown partition table
- 46 common/cmd_ide.c valid partition table found
- -47 common/cmd_ide.c Invalid partition type
- 47 common/cmd_ide.c correct partition type
- -48 common/cmd_ide.c Error reading Image Header on boot device
- 48 common/cmd_ide.c reading Image Header from IDE device OK
- -49 common/cmd_ide.c Image header has bad magic number
- 49 common/cmd_ide.c Image header has correct magic number
- -50 common/cmd_ide.c Image header has bad checksum
- 50 common/cmd_ide.c Image header has correct checksum
- -51 common/cmd_ide.c Error reading Image from IDE device
- 51 common/cmd_ide.c reading Image from IDE device OK
- 52 common/cmd_nand.c before loading a Image from a NAND device
- -53 common/cmd_nand.c Bad usage of "nand" command
- 53 common/cmd_nand.c correct usage of "nand" command
- -54 common/cmd_nand.c No boot device
- 54 common/cmd_nand.c boot device found
- -55 common/cmd_nand.c Unknown Chip ID on boot device
- 55 common/cmd_nand.c correct chip ID found, device available
- -56 common/cmd_nand.c Error reading Image Header on boot device
- 56 common/cmd_nand.c reading Image Header from NAND device OK
- -57 common/cmd_nand.c Image header has bad magic number
- 57 common/cmd_nand.c Image header has correct magic number
- -58 common/cmd_nand.c Error reading Image from NAND device
- 58 common/cmd_nand.c reading Image from NAND device OK
-
- -60 common/env_common.c Environment has a bad CRC, using default
-
- 64 net/eth.c starting with Ethernet configuration.
- -64 net/eth.c no Ethernet found.
- 65 net/eth.c Ethernet found.
-
- -80 common/cmd_net.c usage wrong
- 80 common/cmd_net.c before calling net_loop()
- -81 common/cmd_net.c some error in net_loop() occurred
- 81 common/cmd_net.c net_loop() back without error
- -82 common/cmd_net.c size == 0 (File with size 0 loaded)
- 82 common/cmd_net.c trying automatic boot
- 83 common/cmd_net.c running "source" command
- -83 common/cmd_net.c some error in automatic boot or "source" command
- 84 common/cmd_net.c end without errors
-
- FIT uImage format:
-
- Arg Where When
- 100 common/cmd_bootm.c Kernel FIT Image has correct format
- -100 common/cmd_bootm.c Kernel FIT Image has incorrect format
- 101 common/cmd_bootm.c No Kernel subimage unit name, using configuration
- -101 common/cmd_bootm.c Can't get configuration for kernel subimage
- 102 common/cmd_bootm.c Kernel unit name specified
- -103 common/cmd_bootm.c Can't get kernel subimage node offset
- 103 common/cmd_bootm.c Found configuration node
- 104 common/cmd_bootm.c Got kernel subimage node offset
- -104 common/cmd_bootm.c Kernel subimage hash verification failed
- 105 common/cmd_bootm.c Kernel subimage hash verification OK
- -105 common/cmd_bootm.c Kernel subimage is for unsupported architecture
- 106 common/cmd_bootm.c Architecture check OK
- -106 common/cmd_bootm.c Kernel subimage has wrong type
- 107 common/cmd_bootm.c Kernel subimage type OK
- -107 common/cmd_bootm.c Can't get kernel subimage data/size
- 108 common/cmd_bootm.c Got kernel subimage data/size
- -108 common/cmd_bootm.c Wrong image type (not legacy, FIT)
- -109 common/cmd_bootm.c Can't get kernel subimage type
- -110 common/cmd_bootm.c Can't get kernel subimage comp
- -111 common/cmd_bootm.c Can't get kernel subimage os
- -112 common/cmd_bootm.c Can't get kernel subimage load address
- -113 common/cmd_bootm.c Image uncompress/copy overwrite error
-
- 120 common/image.c Start initial ramdisk verification
- -120 common/image.c Ramdisk FIT image has incorrect format
- 121 common/image.c Ramdisk FIT image has correct format
- 122 common/image.c No ramdisk subimage unit name, using configuration
- -122 common/image.c Can't get configuration for ramdisk subimage
- 123 common/image.c Ramdisk unit name specified
- -124 common/image.c Can't get ramdisk subimage node offset
- 125 common/image.c Got ramdisk subimage node offset
- -125 common/image.c Ramdisk subimage hash verification failed
- 126 common/image.c Ramdisk subimage hash verification OK
- -126 common/image.c Ramdisk subimage for unsupported architecture
- 127 common/image.c Architecture check OK
- -127 common/image.c Can't get ramdisk subimage data/size
- 128 common/image.c Got ramdisk subimage data/size
- 129 common/image.c Can't get ramdisk load address
- -129 common/image.c Got ramdisk load address
-
- -130 common/cmd_doc.c Incorrect FIT image format
- 131 common/cmd_doc.c FIT image format OK
-
- -140 common/cmd_ide.c Incorrect FIT image format
- 141 common/cmd_ide.c FIT image format OK
-
- -150 common/cmd_nand.c Incorrect FIT image format
- 151 common/cmd_nand.c FIT image format OK
-
-endmenu
-
menu "Boot media"
config NOR_BOOT
diff --git a/common/Kconfig.boot b/common/Kconfig.boot
index d65b66d53ce..eb85045255a 100644
--- a/common/Kconfig.boot
+++ b/common/Kconfig.boot
@@ -338,4 +338,295 @@ config ARCH_FIXUP_FDT_MEMORY
endmenu # Boot images
+menu "Boot timing"
+
+config BOOTSTAGE
+ bool "Boot timing and reporting"
+ help
+ Enable recording of boot time while booting. To use it, insert
+ calls to bootstage_mark() with a suitable BOOTSTAGE_ID from
+ bootstage.h. Only a single entry is recorded for each ID. You can
+ give the entry a name with bootstage_mark_name(). You can also
+ record elapsed time in a particular stage using bootstage_start()
+ before starting and bootstage_accum() when finished. Bootstage will
+ add up all the accumulated time and report it.
+
+ Normally, IDs are defined in bootstage.h but a small number of
+ additional 'user' IDs can be used by passing BOOTSTAGE_ID_ALLOC
+ as the ID.
+
+ Calls to show_boot_progress() will also result in log entries but
+ these will not have names.
+
+config SPL_BOOTSTAGE
+ bool "Boot timing and reported in SPL"
+ depends on BOOTSTAGE
+ help
+ Enable recording of boot time in SPL. To make this visible to U-Boot
+ proper, enable BOOTSTAGE_STASH as well. This will stash the timing
+ information when SPL finishes and load it when U-Boot proper starts
+ up.
+
+config TPL_BOOTSTAGE
+ bool "Boot timing and reported in TPL"
+ depends on BOOTSTAGE
+ help
+ Enable recording of boot time in SPL. To make this visible to U-Boot
+ proper, enable BOOTSTAGE_STASH as well. This will stash the timing
+ information when TPL finishes and load it when U-Boot proper starts
+ up.
+
+config BOOTSTAGE_REPORT
+ bool "Display a detailed boot timing report before booting the OS"
+ depends on BOOTSTAGE
+ help
+ Enable output of a boot time report just before the OS is booted.
+ This shows how long it took U-Boot to go through each stage of the
+ boot process. The report looks something like this:
+
+ Timer summary in microseconds:
+ Mark Elapsed Stage
+ 0 0 reset
+ 3,575,678 3,575,678 board_init_f start
+ 3,575,695 17 arch_cpu_init A9
+ 3,575,777 82 arch_cpu_init done
+ 3,659,598 83,821 board_init_r start
+ 3,910,375 250,777 main_loop
+ 29,916,167 26,005,792 bootm_start
+ 30,361,327 445,160 start_kernel
+
+config BOOTSTAGE_RECORD_COUNT
+ int "Number of boot stage records to store"
+ default 30
+ help
+ This is the size of the bootstage record list and is the maximum
+ number of bootstage records that can be recorded.
+
+config SPL_BOOTSTAGE_RECORD_COUNT
+ int "Number of boot stage records to store for SPL"
+ default 5
+ help
+ This is the size of the bootstage record list and is the maximum
+ number of bootstage records that can be recorded.
+
+config TPL_BOOTSTAGE_RECORD_COUNT
+ int "Number of boot stage records to store for TPL"
+ default 5
+ help
+ This is the size of the bootstage record list and is the maximum
+ number of bootstage records that can be recorded.
+
+config BOOTSTAGE_FDT
+ bool "Store boot timing information in the OS device tree"
+ depends on BOOTSTAGE
+ help
+ Stash the bootstage information in the FDT. A root 'bootstage'
+ node is created with each bootstage id as a child. Each child
+ has a 'name' property and either 'mark' containing the
+ mark time in microseconds, or 'accum' containing the
+ accumulated time for that bootstage id in microseconds.
+ For example:
+
+ bootstage {
+ 154 {
+ name = "board_init_f";
+ mark = <3575678>;
+ };
+ 170 {
+ name = "lcd";
+ accum = <33482>;
+ };
+ };
+
+ Code in the Linux kernel can find this in /proc/devicetree.
+
+config BOOTSTAGE_STASH
+ bool "Stash the boot timing information in memory before booting OS"
+ depends on BOOTSTAGE
+ help
+ Some OSes do not support device tree. Bootstage can instead write
+ the boot timing information in a binary format at a given address.
+ This happens through a call to bootstage_stash(), typically in
+ the CPU's cleanup_before_linux() function. You can use the
+ 'bootstage stash' and 'bootstage unstash' commands to do this on
+ the command line.
+
+config BOOTSTAGE_STASH_ADDR
+ hex "Address to stash boot timing information"
+ default 0
+ help
+ Provide an address which will not be overwritten by the OS when it
+ starts, so that it can read this information when ready.
+
+config BOOTSTAGE_STASH_SIZE
+ hex "Size of boot timing stash region"
+ default 0x1000
+ help
+ This should be large enough to hold the bootstage stash. A value of
+ 4096 (4KiB) is normally plenty.
+
+config SHOW_BOOT_PROGRESS
+ bool "Show boot progress in a board-specific manner"
+ help
+ Defining this option allows to add some board-specific code (calling
+ a user-provided function show_boot_progress(int) that enables you to
+ show the system's boot progress on some display (for example, some
+ LEDs) on your board. At the moment, the following checkpoints are
+ implemented:
+
+ Legacy uImage format:
+
+ Arg Where When
+ 1 common/cmd_bootm.c before attempting to boot an image
+ -1 common/cmd_bootm.c Image header has bad magic number
+ 2 common/cmd_bootm.c Image header has correct magic number
+ -2 common/cmd_bootm.c Image header has bad checksum
+ 3 common/cmd_bootm.c Image header has correct checksum
+ -3 common/cmd_bootm.c Image data has bad checksum
+ 4 common/cmd_bootm.c Image data has correct checksum
+ -4 common/cmd_bootm.c Image is for unsupported architecture
+ 5 common/cmd_bootm.c Architecture check OK
+ -5 common/cmd_bootm.c Wrong Image Type (not kernel, multi)
+ 6 common/cmd_bootm.c Image Type check OK
+ -6 common/cmd_bootm.c gunzip uncompression error
+ -7 common/cmd_bootm.c Unimplemented compression type
+ 7 common/cmd_bootm.c Uncompression OK
+ 8 common/cmd_bootm.c No uncompress/copy overwrite error
+ -9 common/cmd_bootm.c Unsupported OS (not Linux, BSD, VxWorks, QNX)
+
+ 9 common/image.c Start initial ramdisk verification
+ -10 common/image.c Ramdisk header has bad magic number
+ -11 common/image.c Ramdisk header has bad checksum
+ 10 common/image.c Ramdisk header is OK
+ -12 common/image.c Ramdisk data has bad checksum
+ 11 common/image.c Ramdisk data has correct checksum
+ 12 common/image.c Ramdisk verification complete, start loading
+ -13 common/image.c Wrong Image Type (not PPC Linux ramdisk)
+ 13 common/image.c Start multifile image verification
+ 14 common/image.c No initial ramdisk, no multifile, continue.
+
+ 15 arch/<arch>/lib/bootm.c All preparation done, transferring control to OS
+
+ -30 arch/powerpc/lib/board.c Fatal error, hang the system
+ -31 post/post.c POST test failed, detected by post_output_backlog()
+ -32 post/post.c POST test failed, detected by post_run_single()
+
+ 34 common/cmd_doc.c before loading a Image from a DOC device
+ -35 common/cmd_doc.c Bad usage of "doc" command
+ 35 common/cmd_doc.c correct usage of "doc" command
+ -36 common/cmd_doc.c No boot device
+ 36 common/cmd_doc.c correct boot device
+ -37 common/cmd_doc.c Unknown Chip ID on boot device
+ 37 common/cmd_doc.c correct chip ID found, device available
+ -38 common/cmd_doc.c Read Error on boot device
+ 38 common/cmd_doc.c reading Image header from DOC device OK
+ -39 common/cmd_doc.c Image header has bad magic number
+ 39 common/cmd_doc.c Image header has correct magic number
+ -40 common/cmd_doc.c Error reading Image from DOC device
+ 40 common/cmd_doc.c Image header has correct magic number
+ 41 common/cmd_ide.c before loading a Image from a IDE device
+ -42 common/cmd_ide.c Bad usage of "ide" command
+ 42 common/cmd_ide.c correct usage of "ide" command
+ -43 common/cmd_ide.c No boot device
+ 43 common/cmd_ide.c boot device found
+ -44 common/cmd_ide.c Device not available
+ 44 common/cmd_ide.c Device available
+ -45 common/cmd_ide.c wrong partition selected
+ 45 common/cmd_ide.c partition selected
+ -46 common/cmd_ide.c Unknown partition table
+ 46 common/cmd_ide.c valid partition table found
+ -47 common/cmd_ide.c Invalid partition type
+ 47 common/cmd_ide.c correct partition type
+ -48 common/cmd_ide.c Error reading Image Header on boot device
+ 48 common/cmd_ide.c reading Image Header from IDE device OK
+ -49 common/cmd_ide.c Image header has bad magic number
+ 49 common/cmd_ide.c Image header has correct magic number
+ -50 common/cmd_ide.c Image header has bad checksum
+ 50 common/cmd_ide.c Image header has correct checksum
+ -51 common/cmd_ide.c Error reading Image from IDE device
+ 51 common/cmd_ide.c reading Image from IDE device OK
+ 52 common/cmd_nand.c before loading a Image from a NAND device
+ -53 common/cmd_nand.c Bad usage of "nand" command
+ 53 common/cmd_nand.c correct usage of "nand" command
+ -54 common/cmd_nand.c No boot device
+ 54 common/cmd_nand.c boot device found
+ -55 common/cmd_nand.c Unknown Chip ID on boot device
+ 55 common/cmd_nand.c correct chip ID found, device available
+ -56 common/cmd_nand.c Error reading Image Header on boot device
+ 56 common/cmd_nand.c reading Image Header from NAND device OK
+ -57 common/cmd_nand.c Image header has bad magic number
+ 57 common/cmd_nand.c Image header has correct magic number
+ -58 common/cmd_nand.c Error reading Image from NAND device
+ 58 common/cmd_nand.c reading Image from NAND device OK
+
+ -60 common/env_common.c Environment has a bad CRC, using default
+
+ 64 net/eth.c starting with Ethernet configuration.
+ -64 net/eth.c no Ethernet found.
+ 65 net/eth.c Ethernet found.
+
+ -80 common/cmd_net.c usage wrong
+ 80 common/cmd_net.c before calling net_loop()
+ -81 common/cmd_net.c some error in net_loop() occurred
+ 81 common/cmd_net.c net_loop() back without error
+ -82 common/cmd_net.c size == 0 (File with size 0 loaded)
+ 82 common/cmd_net.c trying automatic boot
+ 83 common/cmd_net.c running "source" command
+ -83 common/cmd_net.c some error in automatic boot or "source" command
+ 84 common/cmd_net.c end without errors
+
+ FIT uImage format:
+
+ Arg Where When
+ 100 common/cmd_bootm.c Kernel FIT Image has correct format
+ -100 common/cmd_bootm.c Kernel FIT Image has incorrect format
+ 101 common/cmd_bootm.c No Kernel subimage unit name, using configuration
+ -101 common/cmd_bootm.c Can't get configuration for kernel subimage
+ 102 common/cmd_bootm.c Kernel unit name specified
+ -103 common/cmd_bootm.c Can't get kernel subimage node offset
+ 103 common/cmd_bootm.c Found configuration node
+ 104 common/cmd_bootm.c Got kernel subimage node offset
+ -104 common/cmd_bootm.c Kernel subimage hash verification failed
+ 105 common/cmd_bootm.c Kernel subimage hash verification OK
+ -105 common/cmd_bootm.c Kernel subimage is for unsupported architecture
+ 106 common/cmd_bootm.c Architecture check OK
+ -106 common/cmd_bootm.c Kernel subimage has wrong type
+ 107 common/cmd_bootm.c Kernel subimage type OK
+ -107 common/cmd_bootm.c Can't get kernel subimage data/size
+ 108 common/cmd_bootm.c Got kernel subimage data/size
+ -108 common/cmd_bootm.c Wrong image type (not legacy, FIT)
+ -109 common/cmd_bootm.c Can't get kernel subimage type
+ -110 common/cmd_bootm.c Can't get kernel subimage comp
+ -111 common/cmd_bootm.c Can't get kernel subimage os
+ -112 common/cmd_bootm.c Can't get kernel subimage load address
+ -113 common/cmd_bootm.c Image uncompress/copy overwrite error
+
+ 120 common/image.c Start initial ramdisk verification
+ -120 common/image.c Ramdisk FIT image has incorrect format
+ 121 common/image.c Ramdisk FIT image has correct format
+ 122 common/image.c No ramdisk subimage unit name, using configuration
+ -122 common/image.c Can't get configuration for ramdisk subimage
+ 123 common/image.c Ramdisk unit name specified
+ -124 common/image.c Can't get ramdisk subimage node offset
+ 125 common/image.c Got ramdisk subimage node offset
+ -125 common/image.c Ramdisk subimage hash verification failed
+ 126 common/image.c Ramdisk subimage hash verification OK
+ -126 common/image.c Ramdisk subimage for unsupported architecture
+ 127 common/image.c Architecture check OK
+ -127 common/image.c Can't get ramdisk subimage data/size
+ 128 common/image.c Got ramdisk subimage data/size
+ 129 common/image.c Can't get ramdisk load address
+ -129 common/image.c Got ramdisk load address
+
+ -130 common/cmd_doc.c Incorrect FIT image format
+ 131 common/cmd_doc.c FIT image format OK
+
+ -140 common/cmd_ide.c Incorrect FIT image format
+ 141 common/cmd_ide.c FIT image format OK
+
+ -150 common/cmd_nand.c Incorrect FIT image format
+ 151 common/cmd_nand.c FIT image format OK
+
+endmenu
+
endmenu # Booting
--
2.28.0.618.gf4bc123cb7-goog
More information about the U-Boot
mailing list