[v4, 00/11] mmc: fsl_esdhc: support eMMC HS200/HS400 modes

Jaehoon Chung jh80.chung at samsung.com
Mon Sep 7 09:21:26 CEST 2020


On 9/7/20 12:19 PM, Y.b. Lu wrote:
> Hi Jaehoon and Peng,
> 
> Any comments on the v4 patch-set?

Will check. Thanks!

Best Regards,
Jaehoon Chung

> Thank you.
> 
> Best regards,
> Yangbo Lu
> 
>> -----Original Message-----
>> From: Yangbo Lu <yangbo.lu at nxp.com>
>> Sent: Tuesday, September 1, 2020 4:58 PM
>> To: u-boot at lists.denx.de; Peng Fan <peng.fan at nxp.com>; Priyanka Jain
>> <priyanka.jain at nxp.com>; 'Jaehoon Chung' <jh80.chung at samsung.com>
>> Cc: Y.b. Lu <yangbo.lu at nxp.com>
>> Subject: [v4, 00/11] mmc: fsl_esdhc: support eMMC HS200/HS400 modes
>>
>> This patch-set is to support eMMC HS200 and HS400 speed modes for
>> eSDHC, and enable them on LX2160ARDB board.
>>
>> CI build link
>> https://protect2.fireeye.com/v1/url?k=b4e11c14-e97d1d74-b4e0975b-0cc47a31307c-17ee447490c8297d&q=1&e=facc8ec9-f5b1-4cdf-bad5-baf7c2c5035b&u=https%3A%2F%2Feur01.safelinks.protection.outlook.com%2F%3Furl%3Dhttps%253A%252F%252Ftravis-ci
>> .org%2Fgithub%2Fyangbolu1991%2Fu-boot-test%2Fbuilds%2F720875619&a
>> mp;data=02%7C01%7Cyangbo.lu%40nxp.com%7Caf6b8adab90444f93e1208d
>> 84e563a07%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7C637345
>> 479527036436&sdata=L26QnuiL3ETvLbr4P1oJqxVJAoVlYY3ROg%2FWpb
>> J%2B6cc%3D&reserved=0
>>
>> Changes for v2:
>> 	- Added two patches to fix stability issue.
>> Changes for v3:
>> 	- Explained more in commit messages.
>> 	- Added HS400 exit code for downgrade.
>> Changes for v4:
>> 	- Checked returning of mmc_hs400_prepare_ddr().
>> 	- Added Reviewed-by.
>> 	- Rebased.
>>
>> Yangbo Lu (11):
>>   mmc: add a reinit() API
>>   mmc: fsl_esdhc: add a reinit() callback
>>   mmc: fsl_esdhc: support tuning for eMMC HS200
>>   mmc: fsl_esdhc: clean TBCTL[TB_EN] manually during init
>>   mmc: add a hs400_tuning flag
>>   mmc: add a mmc_hs400_prepare_ddr() interface
>>   mmc: fsl_esdhc: support eMMC HS400 mode
>>   mmc: fsl_esdhc: fix mmc->clock with actual clock
>>   mmc: fsl_esdhc: fix eMMC HS400 stability issue
>>   arm: dts: lx2160ardb: support eMMC HS400 mode
>>   configs: lx2160ardb: enable eMMC HS400 mode support
>>
>>  arch/arm/dts/fsl-lx2160a-rdb.dts             |   2 +
>>  configs/lx2160ardb_tfa_SECURE_BOOT_defconfig |   1 +
>>  configs/lx2160ardb_tfa_defconfig             |   1 +
>>  configs/lx2160ardb_tfa_stmm_defconfig        |   1 +
>>  drivers/mmc/fsl_esdhc.c                      | 176
>> ++++++++++++++++++++++++++-
>>  drivers/mmc/mmc-uclass.c                     |  30 +++++
>>  drivers/mmc/mmc.c                            |  14 ++-
>>  include/fsl_esdhc.h                          |  29 ++++-
>>  include/mmc.h                                |  26 +++-
>>  9 files changed, 270 insertions(+), 10 deletions(-)
>>
>> --
>> 2.7.4
> 
> 



More information about the U-Boot mailing list