[v4, 00/11] mmc: fsl_esdhc: support eMMC HS200/HS400 modes

Peng Fan peng.fan at nxp.com
Tue Sep 8 03:08:25 CEST 2020


Hi Y.b

> Subject: RE: [v4, 00/11] mmc: fsl_esdhc: support eMMC HS200/HS400 modes
> 
> Hi Jaehoon and Peng,
> 
> Any comments on the v4 patch-set?

Sorry for late. I need postpone the pick up this patchset until next.
I'll give a check, if no issues, I'll pick this into next branch.

Thanks,
Peng.

> Thank you.
> 
> Best regards,
> Yangbo Lu
> 
> > -----Original Message-----
> > From: Yangbo Lu <yangbo.lu at nxp.com>
> > Sent: Tuesday, September 1, 2020 4:58 PM
> > To: u-boot at lists.denx.de; Peng Fan <peng.fan at nxp.com>; Priyanka Jain
> > <priyanka.jain at nxp.com>; 'Jaehoon Chung' <jh80.chung at samsung.com>
> > Cc: Y.b. Lu <yangbo.lu at nxp.com>
> > Subject: [v4, 00/11] mmc: fsl_esdhc: support eMMC HS200/HS400 modes
> >
> > This patch-set is to support eMMC HS200 and HS400 speed modes for
> > eSDHC, and enable them on LX2160ARDB board.
> >
> > CI build link
> > https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Ftrav
> > is-ci
> > .org%2Fgithub%2Fyangbolu1991%2Fu-boot-test%2Fbuilds%2F720875619&
> a
> >
> mp;data=02%7C01%7Cyangbo.lu%40nxp.com%7Caf6b8adab90444f93e1208
> d
> >
> 84e563a07%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7C637345
> >
> 479527036436&sdata=L26QnuiL3ETvLbr4P1oJqxVJAoVlYY3ROg%2FWpb
> > J%2B6cc%3D&reserved=0
> >
> > Changes for v2:
> > 	- Added two patches to fix stability issue.
> > Changes for v3:
> > 	- Explained more in commit messages.
> > 	- Added HS400 exit code for downgrade.
> > Changes for v4:
> > 	- Checked returning of mmc_hs400_prepare_ddr().
> > 	- Added Reviewed-by.
> > 	- Rebased.
> >
> > Yangbo Lu (11):
> >   mmc: add a reinit() API
> >   mmc: fsl_esdhc: add a reinit() callback
> >   mmc: fsl_esdhc: support tuning for eMMC HS200
> >   mmc: fsl_esdhc: clean TBCTL[TB_EN] manually during init
> >   mmc: add a hs400_tuning flag
> >   mmc: add a mmc_hs400_prepare_ddr() interface
> >   mmc: fsl_esdhc: support eMMC HS400 mode
> >   mmc: fsl_esdhc: fix mmc->clock with actual clock
> >   mmc: fsl_esdhc: fix eMMC HS400 stability issue
> >   arm: dts: lx2160ardb: support eMMC HS400 mode
> >   configs: lx2160ardb: enable eMMC HS400 mode support
> >
> >  arch/arm/dts/fsl-lx2160a-rdb.dts             |   2 +
> >  configs/lx2160ardb_tfa_SECURE_BOOT_defconfig |   1 +
> >  configs/lx2160ardb_tfa_defconfig             |   1 +
> >  configs/lx2160ardb_tfa_stmm_defconfig        |   1 +
> >  drivers/mmc/fsl_esdhc.c                      | 176
> > ++++++++++++++++++++++++++-
> >  drivers/mmc/mmc-uclass.c                     |  30 +++++
> >  drivers/mmc/mmc.c                            |  14 ++-
> >  include/fsl_esdhc.h                          |  29 ++++-
> >  include/mmc.h                                |  26 +++-
> >  9 files changed, 270 insertions(+), 10 deletions(-)
> >
> > --
> > 2.7.4



More information about the U-Boot mailing list