[PATCH 0/8] ARM: mach-meson: update & rework USB for GXL, GXM & AXG
Neil Armstrong
narmstrong at baylibre.com
Thu Sep 10 10:48:11 CEST 2020
This serie follows the recent work under Linux to rework and update support of
the USB complex in the Amlogic GXL, GXM & AXG SoCs.
This rework follows the clean implementation for the G12A & following SoCs to support
Host, Device & OTG functionnality.
The GXL, GXM & AXG USB complex is architectured in the same was as the G12A & later USB complex,
thus we can use the same architecture but adapted to the different init & config flow found
in the Amlogic GXL, GXM & AXG SoCs.
With this patchset, USB Host functionnality is retained, working & tested on the Khadas VIM2 (GXM),
Libretech-CC (GXL) & S400 (AXG), with Device mode added and tested by using the UMS gadget.
Neil Armstrong (8):
ARM: dts: sync amlogic AXG/GXL/GXM DT from Linux 5.8-rc1
usb: dwc3: add Amlogic GXL & GXL DWC3 Glue
ARM: mach-meson: use new DWC3 glue for GXL & GXM
phy: meson-gxl: remove invalid USB3 PHY driver
phy: meson-gxl-usb: depend on Meson AXG aswell
arm: meson-axg: add board_usb_init()/cleanup() for USB gadget
ARM: dts: meson-axg: add USB nodes for S400
configs: s400: enable USB
arch/arm/dts/meson-axg-s400-u-boot.dtsi | 12 +
arch/arm/dts/meson-axg-u-boot.dtsi | 62 +++
arch/arm/dts/meson-axg.dtsi | 6 +-
arch/arm/dts/meson-gx-libretech-pc.dtsi | 78 +++-
arch/arm/dts/meson-gx.dtsi | 23 +-
arch/arm/dts/meson-gxbb-nanopi-k2.dts | 2 +-
arch/arm/dts/meson-gxbb-odroidc2.dts | 2 +-
arch/arm/dts/meson-gxbb.dtsi | 23 +
.../meson-gxl-s805x-libretech-ac-u-boot.dtsi | 4 -
arch/arm/dts/meson-gxl-s805x-libretech-ac.dts | 73 ++-
.../meson-gxl-s905d-libretech-pc-u-boot.dtsi | 4 -
.../meson-gxl-s905x-khadas-vim-u-boot.dtsi | 4 -
arch/arm/dts/meson-gxl-s905x-khadas-vim.dts | 4 +
.../meson-gxl-s905x-libretech-cc-u-boot.dtsi | 4 -
arch/arm/dts/meson-gxl-s905x-libretech-cc.dts | 77 +++-
arch/arm/dts/meson-gxl-s905x-p212.dtsi | 3 +-
arch/arm/dts/meson-gxl-u-boot.dtsi | 16 -
arch/arm/dts/meson-gxl.dtsi | 79 +++-
.../arm/dts/meson-gxm-khadas-vim2-u-boot.dtsi | 4 -
arch/arm/dts/meson-gxm-khadas-vim2.dts | 3 +-
.../meson-gxm-s912-libretech-pc-u-boot.dtsi | 4 -
arch/arm/dts/meson-gxm.dtsi | 7 +-
arch/arm/include/asm/arch-meson/usb-gx.h | 3 +-
arch/arm/mach-meson/board-axg.c | 128 ++++++
arch/arm/mach-meson/board-gx.c | 127 +++---
configs/khadas-vim2_defconfig | 2 +-
configs/khadas-vim_defconfig | 2 +-
configs/libretech-ac_defconfig | 2 +-
configs/libretech-cc_defconfig | 2 +-
configs/libretech-s905d-pc_defconfig | 2 +-
configs/libretech-s912-pc_defconfig | 2 +-
configs/p212_defconfig | 2 +-
configs/s400_defconfig | 15 +
drivers/phy/Kconfig | 2 +-
drivers/phy/Makefile | 2 +-
drivers/phy/meson-gxl-usb3.c | 219 ---------
drivers/usb/dwc3/Kconfig | 8 +
drivers/usb/dwc3/Makefile | 1 +
drivers/usb/dwc3/dwc3-meson-gxl.c | 425 ++++++++++++++++++
.../reset/amlogic,meson-gxbb-reset.h | 2 +-
include/dt-bindings/sound/meson-aiu.h | 18 +
41 files changed, 1092 insertions(+), 366 deletions(-)
create mode 100644 arch/arm/dts/meson-axg-u-boot.dtsi
delete mode 100644 drivers/phy/meson-gxl-usb3.c
create mode 100644 drivers/usb/dwc3/dwc3-meson-gxl.c
create mode 100644 include/dt-bindings/sound/meson-aiu.h
--
2.22.0
More information about the U-Boot
mailing list