[PATCH] ARM: stm32: Use firwmare property instead of loadables

Michal Simek michal.simek at xilinx.com
Mon Sep 7 10:35:26 CEST 2020


There shouldn't be a need to use loadables propertyn because u-boot can be
pointed by firmware property. This change should also speedup boot process
because loadables property is list of strings which code is going through.
On the other hand firmware can just point to one image.

Signed-off-by: Michal Simek <michal.simek at xilinx.com>
---

Only done based on grepping the code. Please retest.
---
 board/dhelectronics/dh_stm32mp1/u-boot-dhcom.its | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/board/dhelectronics/dh_stm32mp1/u-boot-dhcom.its b/board/dhelectronics/dh_stm32mp1/u-boot-dhcom.its
index 905be57dffd7..dfe89bfad67e 100644
--- a/board/dhelectronics/dh_stm32mp1/u-boot-dhcom.its
+++ b/board/dhelectronics/dh_stm32mp1/u-boot-dhcom.its
@@ -39,28 +39,28 @@
 		config-1 {
 			/* DT+SoM+board model */
 			description = "dh,stm32mp15xx-dhcom-pdk2_somrev0_boardrev0";
-			loadables = "uboot";
+			firmware = "uboot";
 			fdt = "fdt-1";
 		};
 
 		config-2 {
 			/* DT+SoM+board model */
 			description = "dh,stm32mp15xx-dhcom-pdk2_somrev1_boardrev0";
-			loadables = "uboot";
+			firmware = "uboot";
 			fdt = "fdt-1";
 		};
 
 		config-3 {
 			/* DT+SoM+board model */
 			description = "dh,stm32mp15xx-dhcom-drc02_somrev0_boardrev0";
-			loadables = "uboot";
+			firmware = "uboot";
 			fdt = "fdt-2";
 		};
 
 		config-4 {
 			/* DT+SoM+board model */
 			description = "dh,stm32mp15xx-dhcom-drc02_somrev1_boardrev0";
-			loadables = "uboot";
+			firmware = "uboot";
 			fdt = "fdt-2";
 		};
 
-- 
2.28.0



More information about the U-Boot mailing list