[PATCH] fpga: zynqmp: Get rid of ZYNQMP_SIP_SVC* macros

Michal Simek michal.simek at xilinx.com
Thu Sep 10 12:41:28 CEST 2020


There is no need to use these macros because enum pm_api_id can be used
instead.

Signed-off-by: Michal Simek <michal.simek at xilinx.com>
---

 drivers/fpga/zynqmppl.c | 8 ++++----
 include/zynqmppl.h      | 3 ---
 2 files changed, 4 insertions(+), 7 deletions(-)

diff --git a/drivers/fpga/zynqmppl.c b/drivers/fpga/zynqmppl.c
index 5b103cfeaf18..03878d32ec1c 100644
--- a/drivers/fpga/zynqmppl.c
+++ b/drivers/fpga/zynqmppl.c
@@ -231,11 +231,11 @@ static int zynqmp_load(xilinx_desc *desc, const void *buf, size_t bsize,
 	buf_hi = upper_32_bits(bin_buf);
 
 	if (xilfpga_old)
-		ret = xilinx_pm_request(ZYNQMP_SIP_SVC_PM_FPGA_LOAD, buf_lo,
+		ret = xilinx_pm_request(PM_FPGA_LOAD, buf_lo,
 					buf_hi, (u32)(uintptr_t)bsizeptr,
 					bstype, ret_payload);
 	else
-		ret = xilinx_pm_request(ZYNQMP_SIP_SVC_PM_FPGA_LOAD, buf_lo,
+		ret = xilinx_pm_request(PM_FPGA_LOAD, buf_lo,
 					buf_hi, (u32)bsize, 0, ret_payload);
 
 	if (ret)
@@ -277,7 +277,7 @@ static int zynqmp_loads(xilinx_desc *desc, const void *buf, size_t bsize,
 	buf_lo = lower_32_bits((ulong)buf);
 	buf_hi = upper_32_bits((ulong)buf);
 
-	ret = xilinx_pm_request(ZYNQMP_SIP_SVC_PM_FPGA_LOAD, buf_lo,
+	ret = xilinx_pm_request(PM_FPGA_LOAD, buf_lo,
 				buf_hi,
 			 (u32)(uintptr_t)fpga_sec_info->userkey_addr,
 			 flag, ret_payload);
@@ -295,7 +295,7 @@ static int zynqmp_pcap_info(xilinx_desc *desc)
 	int ret;
 	u32 ret_payload[PAYLOAD_ARG_CNT];
 
-	ret = xilinx_pm_request(ZYNQMP_SIP_SVC_PM_FPGA_STATUS, 0, 0, 0,
+	ret = xilinx_pm_request(PM_FPGA_GET_STATUS, 0, 0, 0,
 				0, ret_payload);
 	if (!ret)
 		printf("PCAP status\t0x%x\n", ret_payload[1]);
diff --git a/include/zynqmppl.h b/include/zynqmppl.h
index a0a52ec4c1d3..35cfe17d4441 100644
--- a/include/zynqmppl.h
+++ b/include/zynqmppl.h
@@ -10,9 +10,6 @@
 #include <xilinx.h>
 #include <linux/bitops.h>
 
-#define ZYNQMP_SIP_SVC_CSU_DMA_CHIPID		0xC2000018
-#define ZYNQMP_SIP_SVC_PM_FPGA_LOAD		0xC2000016
-#define ZYNQMP_SIP_SVC_PM_FPGA_STATUS		0xC2000017
 #define ZYNQMP_FPGA_OP_INIT			(1 << 0)
 #define ZYNQMP_FPGA_OP_LOAD			(1 << 1)
 #define ZYNQMP_FPGA_OP_DONE			(1 << 2)
-- 
2.28.0



More information about the U-Boot mailing list