[PATCH v2 39/46] usb: dwc2: Fix not calling dev_xxx with a device

Patrice CHOTARD patrice.chotard at st.com
Wed Sep 16 09:51:59 CEST 2020


Hi Sean

On 9/15/20 4:45 PM, Sean Anderson wrote:
> This adds a dev argument to some functions so dev_xxx always has a device
> to log with. In one instance we must use use a different log function when
remove one "use"
> we are compiled without DM_USB.
>
> Signed-off-by: Sean Anderson <seanga2 at gmail.com>
> ---
>
> Changes in v2:
> - New
>
>  drivers/usb/host/dwc2.c | 39 +++++++++++++++++++++++----------------
>  1 file changed, 23 insertions(+), 16 deletions(-)

Reviewed-by: Patrice Chotard <patrice.chotard at st.com>

Thanks


>
> diff --git a/drivers/usb/host/dwc2.c b/drivers/usb/host/dwc2.c
> index cefe9d83b1..f1d13b1c1d 100644
> --- a/drivers/usb/host/dwc2.c
> +++ b/drivers/usb/host/dwc2.c
> @@ -114,7 +114,8 @@ static void init_fslspclksel(struct dwc2_core_regs *regs)
>   * @param regs Programming view of DWC_otg controller.
>   * @param num Tx FIFO to flush.
>   */
> -static void dwc_otg_flush_tx_fifo(struct dwc2_core_regs *regs, const int num)
> +static void dwc_otg_flush_tx_fifo(struct udevice *dev,
> +				  struct dwc2_core_regs *regs, const int num)
>  {
>  	int ret;
>  
> @@ -134,7 +135,8 @@ static void dwc_otg_flush_tx_fifo(struct dwc2_core_regs *regs, const int num)
>   *
>   * @param regs Programming view of DWC_otg controller.
>   */
> -static void dwc_otg_flush_rx_fifo(struct dwc2_core_regs *regs)
> +static void dwc_otg_flush_rx_fifo(struct udevice *dev,
> +				  struct dwc2_core_regs *regs)
>  {
>  	int ret;
>  
> @@ -152,7 +154,8 @@ static void dwc_otg_flush_rx_fifo(struct dwc2_core_regs *regs)
>   * Do core a soft reset of the core.  Be careful with this because it
>   * resets all the internal state machines of the core.
>   */
> -static void dwc_otg_core_reset(struct dwc2_core_regs *regs)
> +static void dwc_otg_core_reset(struct udevice *dev,
> +			       struct dwc2_core_regs *regs)
>  {
>  	int ret;
>  
> @@ -284,8 +287,8 @@ static void dwc_otg_core_host_init(struct udevice *dev,
>  	clrbits_le32(&regs->gotgctl, DWC2_GOTGCTL_HSTSETHNPEN);
>  
>  	/* Make sure the FIFOs are flushed. */
> -	dwc_otg_flush_tx_fifo(regs, 0x10);	/* All Tx FIFOs */
> -	dwc_otg_flush_rx_fifo(regs);
> +	dwc_otg_flush_tx_fifo(dev, regs, 0x10);	/* All Tx FIFOs */
> +	dwc_otg_flush_rx_fifo(dev, regs);
>  
>  	/* Flush out any leftover queued requests. */
>  	num_channels = readl(&regs->ghwcfg2);
> @@ -306,7 +309,7 @@ static void dwc_otg_core_host_init(struct udevice *dev,
>  		ret = wait_for_bit_le32(&regs->hc_regs[i].hcchar,
>  					DWC2_HCCHAR_CHEN, false, 1000, false);
>  		if (ret)
> -			dev_info("%s: Timeout!\n", __func__);
> +			dev_info(dev, "%s: Timeout!\n", __func__);
>  	}
>  
>  	/* Turn on the vbus power. */
> @@ -330,8 +333,9 @@ static void dwc_otg_core_host_init(struct udevice *dev,
>   *
>   * @param regs Programming view of the DWC_otg controller
>   */
> -static void dwc_otg_core_init(struct dwc2_priv *priv)
> +static void dwc_otg_core_init(struct udevice *dev)
>  {
> +	struct dwc2_priv *priv = dev_get_priv(dev);
>  	struct dwc2_core_regs *regs = priv->regs;
>  	uint32_t ahbcfg = 0;
>  	uint32_t usbcfg = 0;
> @@ -360,7 +364,7 @@ static void dwc_otg_core_init(struct dwc2_priv *priv)
>  	writel(usbcfg, &regs->gusbcfg);
>  
>  	/* Reset the Controller */
> -	dwc_otg_core_reset(regs);
> +	dwc_otg_core_reset(dev, regs);
>  
>  	/*
>  	 * This programming sequence needs to happen in FS mode before
> @@ -372,7 +376,7 @@ static void dwc_otg_core_init(struct dwc2_priv *priv)
>  	setbits_le32(&regs->gusbcfg, DWC2_GUSBCFG_PHYSEL);
>  
>  	/* Reset after a PHY select */
> -	dwc_otg_core_reset(regs);
> +	dwc_otg_core_reset(dev, regs);
>  
>  	/*
>  	 * Program DCFG.DevSpd or HCFG.FSLSPclkSel to 48Mhz in FS.
> @@ -419,7 +423,7 @@ static void dwc_otg_core_init(struct dwc2_priv *priv)
>  	writel(usbcfg, &regs->gusbcfg);
>  
>  	/* Reset after setting the PHY parameters */
> -	dwc_otg_core_reset(regs);
> +	dwc_otg_core_reset(dev, regs);
>  #endif
>  
>  	usbcfg = readl(&regs->gusbcfg);
> @@ -1128,7 +1132,12 @@ int _submit_int_msg(struct dwc2_priv *priv, struct usb_device *dev,
>  	timeout = get_timer(0) + USB_TIMEOUT_MS(pipe);
>  	for (;;) {
>  		if (get_timer(0) > timeout) {
> -			dev_err(dev, "Timeout poll on interrupt endpoint\n");
> +#if CONFIG_IS_ENABLED(DM_USB)
> +			dev_err(dev->dev,
> +				"Timeout poll on interrupt endpoint\n");
> +#else
> +			log_err("Timeout poll on interrupt endpoint\n");
> +#endif
>  			return -ETIMEDOUT;
>  		}
>  		ret = _submit_bulk_msg(priv, dev, pipe, buffer, len);
> @@ -1194,7 +1203,7 @@ static int dwc2_init_common(struct udevice *dev, struct dwc2_priv *priv)
>  	priv->ext_vbus = 0;
>  #endif
>  
> -	dwc_otg_core_init(priv);
> +	dwc_otg_core_init(dev);
>  	dwc_otg_core_host_init(dev, regs);
>  
>  	clrsetbits_le32(&regs->hprt0, DWC2_HPRT0_PRTENA |
> @@ -1320,12 +1329,10 @@ static int dwc2_submit_int_msg(struct udevice *dev, struct usb_device *udev,
>  static int dwc2_usb_ofdata_to_platdata(struct udevice *dev)
>  {
>  	struct dwc2_priv *priv = dev_get_priv(dev);
> -	fdt_addr_t addr;
>  
> -	addr = dev_read_addr(dev);
> -	if (addr == FDT_ADDR_T_NONE)
> +	priv->regs = dev_read_addr_ptr(dev);
> +	if (!priv->regs)
>  		return -EINVAL;
> -	priv->regs = (struct dwc2_core_regs *)addr;
>  
>  	priv->oc_disable = dev_read_bool(dev, "disable-over-current");
>  	priv->hnp_srp_disable = dev_read_bool(dev, "hnp-srp-disable");


More information about the U-Boot mailing list