SPI bus not probed
Michal Suchánek
msuchanek at suse.de
Mon Sep 28 10:23:04 CEST 2020
On Sun, Sep 27, 2020 at 10:35:30PM +0200, Michal Suchánek wrote:
> Hello,
>
> When I enable SPI support I do not get a SPI bus.
>
> Config:
> --- a/configs/orangepi_zero_defconfig
> +++ b/configs/orangepi_zero_defconfig
> @@ -11,3 +11,21 @@ CONFIG_CONSOLE_MUX=y
> CONFIG_SUN8I_EMAC=y
> CONFIG_USB_EHCI_HCD=y
> CONFIG_USB_OHCI_HCD=y
> +CONFIG_SPI=y
> +CONFIG_DM_SPI=y
> +CONFIG_DM_SPI_FLASH=y
> +CONFIG_SPI_FLASH=y
> +CONFIG_CMD_SPI=y
> +CONFIG_CMD_SF_TEST=y
> +CONFIG_SPI_FLASH_SFDP_SUPPORT=y
> +CONFIG_SPI_FLASH_ATMEL=y
> +CONFIG_SPI_FLASH_EON=y
> +CONFIG_SPI_FLASH_GIGADEVICE=y
> +CONFIG_SPI_FLASH_ISSI=y
> +CONFIG_SPI_FLASH_MACRONIX=y
> +CONFIG_SPI_FLASH_SPANSION=y
> +CONFIG_SPI_FLASH_STMICRO=y
> +CONFIG_SPI_FLASH_SST=y
> +CONFIG_SPI_FLASH_WINBOND=y
> +CONFIG_SPI_FLASH_XMC=y
> +CONFIG_SPI_FLASH_DATAFLASH=y
>
> DT (which lists the flash types so did not really have to enable them all)
> --- a/arch/arm/dts/sun8i-h2-plus-orangepi-zero.dts
> +++ b/arch/arm/dts/sun8i-h2-plus-orangepi-zero.dts
> @@ -163,10 +163,11 @@
> };
>
> &spi0 {
> - /* Disable SPI NOR by default: it optional on Orange Pi Zero boards */
> - status = "disabled";
> + /* Enable SPI NOR by default: it optional on Orange Pi Zero boards */
> + status = "okay";
>
> flash at 0 {
> + status = "okay";
> #address-cells = <1>;
> #size-cells = <1>;
> compatible = "mxicy,mx25l1606e", "winbond,w25q128";
>
> The guide on debugging says to add dm_dump_all
> --- a/drivers/spi/spi-uclass.c
> +++ b/drivers/spi/spi-uclass.c
> @@ -328,6 +328,7 @@ int spi_get_bus_and_cs(int busnum, int cs, int speed, int mode,
> bool created = false;
> int ret;
>
> + dm_dump_all();
> #if CONFIG_IS_ENABLED(OF_PLATDATA)
> ret = uclass_first_device_err(UCLASS_SPI, &bus);
> #else
>
> which prints
>
> Class Index Probed Driver Name
> -----------------------------------------------------------
> root 0 [ + ] root_driver root_driver
> simple_bus 0 [ + ] simple_bus |-- soc
> mmc 0 [ + ] sunxi_mmc | |-- mmc at 1c0f000
> blk 0 [ ] mmc_blk | | `-- mmc at 1c0f000.blk
> mmc 1 [ + ] sunxi_mmc | |-- mmc at 1c10000
> blk 1 [ ] mmc_blk | | `-- mmc at 1c10000.blk
> phy 0 [ ] sun4i_usb_phy | |-- phy at 1c19400
> usb 0 [ ] ehci_generic | |-- usb at 1c1a000
> usb 1 [ ] ohci_generic | |-- usb at 1c1a400
> usb 2 [ ] ehci_generic | |-- usb at 1c1b000
> usb 3 [ ] ohci_generic | |-- usb at 1c1b400
> clk 0 [ + ] sun8i_h3_ccu | |-- clock at 1c20000
> reset 0 [ + ] sunxi_reset | | `-- reset
> gpio 0 [ + ] gpio_sunxi | |-- pinctrl at 1c20800
> gpio 1 [ + ] gpio_sunxi | | |-- PA
> gpio 2 [ + ] gpio_sunxi | | |-- PB
> gpio 3 [ + ] gpio_sunxi | | |-- PC
> gpio 4 [ + ] gpio_sunxi | | |-- PD
> gpio 5 [ + ] gpio_sunxi | | |-- PE
> gpio 6 [ + ] gpio_sunxi | | |-- PF
> gpio 7 [ + ] gpio_sunxi | | |-- PG
> gpio 8 [ + ] gpio_sunxi | | |-- PH
> gpio 9 [ + ] gpio_sunxi | | `-- PI
> eth 0 [ + ] eth_sun8i_emac | |-- ethernet at 1c30000
> spi 0 [ ] sun4i_spi | |-- spi at 1c68000
> serial 0 [ + ] ns16550_serial | |-- serial at 1c28000
> gpio 10 [ + ] gpio_sunxi | `-- pinctrl at 1f02c00
> gpio 11 [ + ] gpio_sunxi | `-- PL
> clk 1 [ + ] fixed_rate_clock |-- osc24M_clk
> clk 2 [ ] fixed_rate_clock `-- osc32k_clk
> Invalid bus 0 (err=-19)
>
> -19 means ENODEV according to my /usr/include/asm-generic/errno-base.h
>
> Debug prints added to sunxi driver are never printed:
>
> --- a/drivers/spi/spi-sunxi.c
> +++ b/drivers/spi/spi-sunxi.c
> @@ -305,6 +305,7 @@ static int sun4i_spi_claim_bus(struct udevice *dev)
> {
> struct sun4i_spi_priv *priv = dev_get_priv(dev->parent);
> int ret;
> + printf("sun4i_spi_claim_bus\n");
>
> ret = sun4i_spi_set_clock(dev->parent, true);
> if (ret)
> @@ -487,6 +488,8 @@ static int sun4i_spi_probe(struct udevice *bus)
> struct sun4i_spi_priv *priv = dev_get_priv(bus);
> int ret;
>
> + printf("sun4i_spi_probe\n");
> +
> ret = clk_get_by_name(bus, "ahb", &priv->clk_ahb);
> if (ret) {
> dev_err(dev, "failed to get ahb clock\n");
>
> AFAICT the device tree compatible matches the one in the driver.
>
> How do I make u-boot run the driver?
Further discussion on IRC shows that for now it is necessary to add
--- a/arch/arm/dts/sun8i-h2-plus-orangepi-zero.dts
+++ b/arch/arm/dts/sun8i-h2-plus-orangepi-zero.dts
@@ -59,6 +59,8 @@
/* ethernet0 is the H3 emac, defined in sun8i-h3.dtsi */
ethernet0 = &emac;
ethernet1 = &xr819;
+ spi0 = &spi0;
+ spi1 = &spi1;
};
chosen {
More information about the U-Boot
mailing list