[PATCH v3 06/21] clk: at91: add pre-requisite headers for AT91 clock architecture
Claudiu Beznea
claudiu.beznea at microchip.com
Mon Sep 7 16:46:37 CEST 2020
Add pre-requisite headers for AT91 clock architecture. These
are based on already present files on Linux and will be used
by following commits for AT91 CCF clock drivers.
Signed-off-by: Claudiu Beznea <claudiu.beznea at microchip.com>
---
include/dt-bindings/clk/at91.h | 22 ++++
include/linux/clk/at91_pmc.h | 247 +++++++++++++++++++++++++++++++++++++++++
2 files changed, 269 insertions(+)
create mode 100644 include/dt-bindings/clk/at91.h
create mode 100644 include/linux/clk/at91_pmc.h
diff --git a/include/dt-bindings/clk/at91.h b/include/dt-bindings/clk/at91.h
new file mode 100644
index 000000000000..e30756b2804a
--- /dev/null
+++ b/include/dt-bindings/clk/at91.h
@@ -0,0 +1,22 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * This header provides constants for AT91 pmc status.
+ * The constants defined in this header are being used in dts and PMC code.
+ *
+ * Copyright (C) 2020 Microchip Technology Inc. and its subsidiaries
+ *
+ * Author: Claudiu Beznea <claudiu.beznea at microchip.com>
+ *
+ * Based on include/dt-bindings/clock/at91.h on Linux.
+ */
+
+#ifndef _DT_BINDINGS_CLK_AT91_H
+#define _DT_BINDINGS_CLK_AT91_H
+
+#define PMC_TYPE_CORE 1
+#define PMC_TYPE_SYSTEM 2
+#define PMC_TYPE_PERIPHERAL 3
+#define PMC_TYPE_GCK 4
+#define PMC_TYPE_SLOW 5
+
+#endif
diff --git a/include/linux/clk/at91_pmc.h b/include/linux/clk/at91_pmc.h
new file mode 100644
index 000000000000..ee39e72e2b39
--- /dev/null
+++ b/include/linux/clk/at91_pmc.h
@@ -0,0 +1,247 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Power Management Controller (PMC) - System peripherals registers.
+ *
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) SAN People
+ *
+ * Based on AT91RM9200 datasheet revision E.
+ * Based on include/linux/clk/at91_pmc.h on Linux.
+ */
+
+#ifndef AT91_PMC_H_
+#define AT91_PMC_H_
+
+#define AT91_PMC_V1 (1) /* PMC version 1 */
+#define AT91_PMC_V2 (2) /* PMC version 2 [SAM9X60] */
+
+#define AT91_PMC_SCER 0x00 /* System Clock Enable Register */
+#define AT91_PMC_SCDR 0x04 /* System Clock Disable Register */
+
+#define AT91_PMC_SCSR 0x08 /* System Clock Status Register */
+#define AT91_PMC_PCK (1 << 0) /* Processor Clock */
+#define AT91RM9200_PMC_UDP (1 << 1) /* USB Devcice Port Clock [AT91RM9200 only] */
+#define AT91RM9200_PMC_MCKUDP (1 << 2) /* USB Device Port Master Clock Automatic Disable on Suspend [AT91RM9200 only] */
+#define AT91RM9200_PMC_UHP (1 << 4) /* USB Host Port Clock [AT91RM9200 only] */
+#define AT91SAM926x_PMC_UHP (1 << 6) /* USB Host Port Clock [AT91SAM926x only] */
+#define AT91SAM926x_PMC_UDP (1 << 7) /* USB Devcice Port Clock [AT91SAM926x only] */
+#define AT91_PMC_PCK0 (1 << 8) /* Programmable Clock 0 */
+#define AT91_PMC_PCK1 (1 << 9) /* Programmable Clock 1 */
+#define AT91_PMC_PCK2 (1 << 10) /* Programmable Clock 2 */
+#define AT91_PMC_PCK3 (1 << 11) /* Programmable Clock 3 */
+#define AT91_PMC_PCK4 (1 << 12) /* Programmable Clock 4 [AT572D940HF only] */
+#define AT91_PMC_HCK0 (1 << 16) /* AHB Clock (USB host) [AT91SAM9261 only] */
+#define AT91_PMC_HCK1 (1 << 17) /* AHB Clock (LCD) [AT91SAM9261 only] */
+
+#define AT91_PMC_PLL_CTRL0 0x0C /* PLL Control Register 0 [for SAM9X60] */
+#define AT91_PMC_PLL_CTRL0_ENPLL (1 << 28) /* Enable PLL */
+#define AT91_PMC_PLL_CTRL0_ENPLLCK (1 << 29) /* Enable PLL clock for PMC */
+#define AT91_PMC_PLL_CTRL0_ENLOCK (1 << 31) /* Enable PLL lock */
+
+#define AT91_PMC_PLL_CTRL1 0x10 /* PLL Control Register 1 [for SAM9X60] */
+
+#define AT91_PMC_PCER 0x10 /* Peripheral Clock Enable Register */
+#define AT91_PMC_PCDR 0x14 /* Peripheral Clock Disable Register */
+#define AT91_PMC_PCSR 0x18 /* Peripheral Clock Status Register */
+
+#define AT91_PMC_PLL_ACR 0x18 /* PLL Analog Control Register [for SAM9X60] */
+#define AT91_PMC_PLL_ACR_DEFAULT_UPLL 0x12020010UL /* Default PLL ACR value for UPLL */
+#define AT91_PMC_PLL_ACR_DEFAULT_PLLA 0x00020010UL /* Default PLL ACR value for PLLA */
+#define AT91_PMC_PLL_ACR_UTMIVR (1 << 12) /* UPLL Voltage regulator Control */
+#define AT91_PMC_PLL_ACR_UTMIBG (1 << 13) /* UPLL Bandgap Control */
+
+#define AT91_CKGR_UCKR 0x1C /* UTMI Clock Register [some SAM9] */
+#define AT91_PMC_UPLLEN (1 << 16) /* UTMI PLL Enable */
+#define AT91_PMC_UPLLCOUNT (0xf << 20) /* UTMI PLL Start-up Time */
+#define AT91_PMC_BIASEN (1 << 24) /* UTMI BIAS Enable */
+#define AT91_PMC_BIASCOUNT (0xf << 28) /* UTMI BIAS Start-up Time */
+
+#define AT91_PMC_PLL_UPDT 0x1C /* PMC PLL update register [for SAM9X60] */
+#define AT91_PMC_PLL_UPDT_ID_MSK (0xf)
+#define AT91_PMC_PLL_UPDT_UPDATE (1 << 8) /* Update PLL settings */
+#define AT91_PMC_PLL_UPDT_ID (1 << 0) /* PLL ID */
+#define AT91_PMC_PLL_UPDT_STUPTIM(n) ((n) << 16) /* Startup time */
+#define AT91_PMC_PMM_UPDT_STUPTIM_MSK (0xff << 16)
+
+#define AT91_CKGR_MOR 0x20 /* Main Oscillator Register [not on SAM9RL] */
+#define AT91_PMC_MOSCEN (1 << 0) /* Main Oscillator Enable */
+#define AT91_PMC_OSCBYPASS (1 << 1) /* Oscillator Bypass */
+#define AT91_PMC_WAITMODE (1 << 2) /* Wait Mode Command */
+#define AT91_PMC_MOSCRCEN (1 << 3) /* Main On-Chip RC Oscillator Enable [some SAM9] */
+#define AT91_PMC_OSCOUNT (0xff << 8) /* Main Oscillator Start-up Time */
+#define AT91_PMC_KEY_MASK (0xff << 16)
+#define AT91_PMC_KEY (0x37 << 16) /* MOR Writing Key */
+#define AT91_PMC_MOSCSEL (1 << 24) /* Main Oscillator Selection [some SAM9] */
+#define AT91_PMC_CFDEN (1 << 25) /* Clock Failure Detector Enable [some SAM9] */
+
+#define AT91_CKGR_MCFR 0x24 /* Main Clock Frequency Register */
+#define AT91_PMC_MAINF (0xffff << 0) /* Main Clock Frequency */
+#define AT91_PMC_MAINRDY (1 << 16) /* Main Clock Ready */
+
+#define AT91_CKGR_PLLAR 0x28 /* PLL A Register */
+#define AT91_CKGR_PLLBR 0x2c /* PLL B Register */
+#define AT91_PMC_DIV (0xff << 0) /* Divider */
+#define AT91_PMC_PLLCOUNT (0x3f << 8) /* PLL Counter */
+#define AT91_PMC_OUT (3 << 14) /* PLL Clock Frequency Range */
+#define AT91_PMC_MUL (0x7ff << 16) /* PLL Multiplier */
+#define AT91_PMC_MUL_GET(n) ((n) >> 16 & 0x7ff)
+#define AT91_PMC3_MUL (0x7f << 18) /* PLL Multiplier [SAMA5 only] */
+#define AT91_PMC3_MUL_GET(n) ((n) >> 18 & 0x7f)
+#define AT91_PMC_USBDIV (3 << 28) /* USB Divisor (PLLB only) */
+#define AT91_PMC_USBDIV_1 (0 << 28)
+#define AT91_PMC_USBDIV_2 (1 << 28)
+#define AT91_PMC_USBDIV_4 (2 << 28)
+#define AT91_PMC_USB96M (1 << 28) /* Divider by 2 Enable (PLLB only) */
+
+#define AT91_PMC_CPU_CKR 0x28 /* CPU Clock Register */
+
+#define AT91_PMC_MCKR 0x30 /* Master Clock Register */
+#define AT91_PMC_CSS (3 << 0) /* Master Clock Selection */
+#define AT91_PMC_CSS_SLOW (0 << 0)
+#define AT91_PMC_CSS_MAIN (1 << 0)
+#define AT91_PMC_CSS_PLLA (2 << 0)
+#define AT91_PMC_CSS_PLLB (3 << 0)
+#define AT91_PMC_CSS_UPLL (3 << 0) /* [some SAM9 only] */
+#define PMC_PRES_OFFSET 2
+#define AT91_PMC_PRES (7 << PMC_PRES_OFFSET) /* Master Clock Prescaler */
+#define AT91_PMC_PRES_1 (0 << PMC_PRES_OFFSET)
+#define AT91_PMC_PRES_2 (1 << PMC_PRES_OFFSET)
+#define AT91_PMC_PRES_4 (2 << PMC_PRES_OFFSET)
+#define AT91_PMC_PRES_8 (3 << PMC_PRES_OFFSET)
+#define AT91_PMC_PRES_16 (4 << PMC_PRES_OFFSET)
+#define AT91_PMC_PRES_32 (5 << PMC_PRES_OFFSET)
+#define AT91_PMC_PRES_64 (6 << PMC_PRES_OFFSET)
+#define PMC_ALT_PRES_OFFSET 4
+#define AT91_PMC_ALT_PRES (7 << PMC_ALT_PRES_OFFSET) /* Master Clock Prescaler [alternate location] */
+#define AT91_PMC_ALT_PRES_1 (0 << PMC_ALT_PRES_OFFSET)
+#define AT91_PMC_ALT_PRES_2 (1 << PMC_ALT_PRES_OFFSET)
+#define AT91_PMC_ALT_PRES_4 (2 << PMC_ALT_PRES_OFFSET)
+#define AT91_PMC_ALT_PRES_8 (3 << PMC_ALT_PRES_OFFSET)
+#define AT91_PMC_ALT_PRES_16 (4 << PMC_ALT_PRES_OFFSET)
+#define AT91_PMC_ALT_PRES_32 (5 << PMC_ALT_PRES_OFFSET)
+#define AT91_PMC_ALT_PRES_64 (6 << PMC_ALT_PRES_OFFSET)
+#define AT91_PMC_MDIV (3 << 8) /* Master Clock Division */
+#define AT91RM9200_PMC_MDIV_1 (0 << 8) /* [AT91RM9200 only] */
+#define AT91RM9200_PMC_MDIV_2 (1 << 8)
+#define AT91RM9200_PMC_MDIV_3 (2 << 8)
+#define AT91RM9200_PMC_MDIV_4 (3 << 8)
+#define AT91SAM9_PMC_MDIV_1 (0 << 8) /* [SAM9 only] */
+#define AT91SAM9_PMC_MDIV_2 (1 << 8)
+#define AT91SAM9_PMC_MDIV_4 (2 << 8)
+#define AT91SAM9_PMC_MDIV_6 (3 << 8) /* [some SAM9 only] */
+#define AT91SAM9_PMC_MDIV_3 (3 << 8) /* [some SAM9 only] */
+#define AT91_PMC_PDIV (1 << 12) /* Processor Clock Division [some SAM9 only] */
+#define AT91_PMC_PDIV_1 (0 << 12)
+#define AT91_PMC_PDIV_2 (1 << 12)
+#define AT91_PMC_PLLADIV2 (1 << 12) /* PLLA divisor by 2 [some SAM9 only] */
+#define AT91_PMC_PLLADIV2_OFF (0 << 12)
+#define AT91_PMC_PLLADIV2_ON (1 << 12)
+#define AT91_PMC_H32MXDIV BIT(24)
+
+#define AT91_PMC_XTALF 0x34 /* Main XTAL Frequency Register [SAMA7G5 only] */
+
+#define AT91_PMC_USB 0x38 /* USB Clock Register [some SAM9 only] */
+#define AT91_PMC_USBS (0x1 << 0) /* USB OHCI Input clock selection */
+#define AT91_PMC_USBS_PLLA (0 << 0)
+#define AT91_PMC_USBS_UPLL (1 << 0)
+#define AT91_PMC_USBS_PLLB (1 << 0) /* [AT91SAMN12 only] */
+#define AT91_PMC_OHCIUSBDIV (0xF << 8) /* Divider for USB OHCI Clock */
+#define AT91_PMC_OHCIUSBDIV_1 (0x0 << 8)
+#define AT91_PMC_OHCIUSBDIV_2 (0x1 << 8)
+
+#define AT91_PMC_SMD 0x3c /* Soft Modem Clock Register [some SAM9 only] */
+#define AT91_PMC_SMDS (0x1 << 0) /* SMD input clock selection */
+#define AT91_PMC_SMD_DIV (0x1f << 8) /* SMD input clock divider */
+#define AT91_PMC_SMDDIV(n) (((n) << 8) & AT91_PMC_SMD_DIV)
+
+#define AT91_PMC_PCKR(n) (0x40 + ((n) * 4)) /* Programmable Clock 0-N Registers */
+#define AT91_PMC_ALT_PCKR_CSS (0x7 << 0) /* Programmable Clock Source Selection [alternate length] */
+#define AT91_PMC_CSS_MASTER (4 << 0) /* [some SAM9 only] */
+#define AT91_PMC_CSSMCK (0x1 << 8) /* CSS or Master Clock Selection */
+#define AT91_PMC_CSSMCK_CSS (0 << 8)
+#define AT91_PMC_CSSMCK_MCK (1 << 8)
+
+#define AT91_PMC_IER 0x60 /* Interrupt Enable Register */
+#define AT91_PMC_IDR 0x64 /* Interrupt Disable Register */
+#define AT91_PMC_SR 0x68 /* Status Register */
+#define AT91_PMC_MOSCS (1 << 0) /* MOSCS Flag */
+#define AT91_PMC_LOCKA (1 << 1) /* PLLA Lock */
+#define AT91_PMC_LOCKB (1 << 2) /* PLLB Lock */
+#define AT91_PMC_MCKRDY (1 << 3) /* Master Clock */
+#define AT91_PMC_LOCKU (1 << 6) /* UPLL Lock [some SAM9] */
+#define AT91_PMC_OSCSEL (1 << 7) /* Slow Oscillator Selection [some SAM9] */
+#define AT91_PMC_PCK0RDY (1 << 8) /* Programmable Clock 0 */
+#define AT91_PMC_PCK1RDY (1 << 9) /* Programmable Clock 1 */
+#define AT91_PMC_PCK2RDY (1 << 10) /* Programmable Clock 2 */
+#define AT91_PMC_PCK3RDY (1 << 11) /* Programmable Clock 3 */
+#define AT91_PMC_MOSCSELS (1 << 16) /* Main Oscillator Selection [some SAM9] */
+#define AT91_PMC_MOSCRCS (1 << 17) /* Main On-Chip RC [some SAM9] */
+#define AT91_PMC_CFDEV (1 << 18) /* Clock Failure Detector Event [some SAM9] */
+#define AT91_PMC_GCKRDY (1 << 24) /* Generated Clocks */
+#define AT91_PMC_MCKXRDY (1 << 26) /* Master Clock x [x=1..4] Ready Status */
+#define AT91_PMC_IMR 0x6c /* Interrupt Mask Register */
+
+#define AT91_PMC_FSMR 0x70 /* Fast Startup Mode Register */
+#define AT91_PMC_FSTT(n) BIT(n)
+#define AT91_PMC_RTTAL BIT(16)
+#define AT91_PMC_RTCAL BIT(17) /* RTC Alarm Enable */
+#define AT91_PMC_USBAL BIT(18) /* USB Resume Enable */
+#define AT91_PMC_SDMMC_CD BIT(19) /* SDMMC Card Detect Enable */
+#define AT91_PMC_LPM BIT(20) /* Low-power Mode */
+#define AT91_PMC_RXLP_MCE BIT(24) /* Backup UART Receive Enable */
+#define AT91_PMC_ACC_CE BIT(25) /* ACC Enable */
+
+#define AT91_PMC_FSPR 0x74 /* Fast Startup Polarity Reg */
+
+#define AT91_PMC_FS_INPUT_MASK 0x7ff
+
+#define AT91_PMC_PLLICPR 0x80 /* PLL Charge Pump Current Register */
+
+#define AT91_PMC_PROT 0xe4 /* Write Protect Mode Register [some SAM9] */
+#define AT91_PMC_WPEN (0x1 << 0) /* Write Protect Enable */
+#define AT91_PMC_WPKEY (0xffffff << 8) /* Write Protect Key */
+#define AT91_PMC_PROTKEY (0x504d43 << 8) /* Activation Code */
+
+#define AT91_PMC_WPSR 0xe8 /* Write Protect Status Register [some SAM9] */
+#define AT91_PMC_WPVS (0x1 << 0) /* Write Protect Violation Status */
+#define AT91_PMC_WPVSRC (0xffff << 8) /* Write Protect Violation Source */
+
+#define AT91_PMC_PLL_ISR0 0xEC /* PLL Interrupt Status Register 0 [SAM9X60 only] */
+
+#define AT91_PMC_PCER1 0x100 /* Peripheral Clock Enable Register 1 [SAMA5 only]*/
+#define AT91_PMC_PCDR1 0x104 /* Peripheral Clock Enable Register 1 */
+#define AT91_PMC_PCSR1 0x108 /* Peripheral Clock Enable Register 1 */
+
+#define AT91_PMC_PCR 0x10c /* Peripheral Control Register [some SAM9 and SAMA5] */
+#define AT91_PMC_PCR_PID_MASK 0x3f
+#define AT91_PMC_PCR_CMD (0x1 << 12) /* Command (read=0, write=1) */
+#define AT91_PMC_PCR_GCKDIV_MASK GENMASK(27, 20)
+#define AT91_PMC_PCR_EN (0x1 << 28) /* Enable */
+#define AT91_PMC_PCR_GCKEN (0x1 << 29) /* GCK Enable */
+
+#define AT91_PMC_AUDIO_PLL0 0x14c
+#define AT91_PMC_AUDIO_PLL_PLLEN (1 << 0)
+#define AT91_PMC_AUDIO_PLL_PADEN (1 << 1)
+#define AT91_PMC_AUDIO_PLL_PMCEN (1 << 2)
+#define AT91_PMC_AUDIO_PLL_RESETN (1 << 3)
+#define AT91_PMC_AUDIO_PLL_ND_OFFSET 8
+#define AT91_PMC_AUDIO_PLL_ND_MASK (0x7f << AT91_PMC_AUDIO_PLL_ND_OFFSET)
+#define AT91_PMC_AUDIO_PLL_ND(n) ((n) << AT91_PMC_AUDIO_PLL_ND_OFFSET)
+#define AT91_PMC_AUDIO_PLL_QDPMC_OFFSET 16
+#define AT91_PMC_AUDIO_PLL_QDPMC_MASK (0x7f << AT91_PMC_AUDIO_PLL_QDPMC_OFFSET)
+#define AT91_PMC_AUDIO_PLL_QDPMC(n) ((n) << AT91_PMC_AUDIO_PLL_QDPMC_OFFSET)
+
+#define AT91_PMC_AUDIO_PLL1 0x150
+#define AT91_PMC_AUDIO_PLL_FRACR_MASK 0x3fffff
+#define AT91_PMC_AUDIO_PLL_QDPAD_OFFSET 24
+#define AT91_PMC_AUDIO_PLL_QDPAD_MASK (0x7f << AT91_PMC_AUDIO_PLL_QDPAD_OFFSET)
+#define AT91_PMC_AUDIO_PLL_QDPAD(n) ((n) << AT91_PMC_AUDIO_PLL_QDPAD_OFFSET)
+#define AT91_PMC_AUDIO_PLL_QDPAD_DIV_OFFSET AT91_PMC_AUDIO_PLL_QDPAD_OFFSET
+#define AT91_PMC_AUDIO_PLL_QDPAD_DIV_MASK (0x3 << AT91_PMC_AUDIO_PLL_QDPAD_DIV_OFFSET)
+#define AT91_PMC_AUDIO_PLL_QDPAD_DIV(n) ((n) << AT91_PMC_AUDIO_PLL_QDPAD_DIV_OFFSET)
+#define AT91_PMC_AUDIO_PLL_QDPAD_EXTDIV_OFFSET 26
+#define AT91_PMC_AUDIO_PLL_QDPAD_EXTDIV_MAX 0x1f
+#define AT91_PMC_AUDIO_PLL_QDPAD_EXTDIV_MASK (AT91_PMC_AUDIO_PLL_QDPAD_EXTDIV_MAX << AT91_PMC_AUDIO_PLL_QDPAD_EXTDIV_OFFSET)
+#define AT91_PMC_AUDIO_PLL_QDPAD_EXTDIV(n) ((n) << AT91_PMC_AUDIO_PLL_QDPAD_EXTDIV_OFFSET)
+
+#endif
--
2.7.4
More information about the U-Boot
mailing list