[PATCH 2/5] configs: Add spiboot support for am335x

[Lokesh Vutla]

On 02/09/20 4:48 pm, Faiz Abbas wrote:
> am335x internal SRAM is too small to support the addition of
> SPI bootmode to the default defconfig. Add a separate spiboot_defconfig
> 
> Signed-off-by: Faiz Abbas <faiz_abbas at ti.com>
> ---
>  configs/am335x_evm_spiboot_defconfig | 93 ++++++++++++++++++++++++++++
>  1 file changed, 93 insertions(+)
>  create mode 100644 configs/am335x_evm_spiboot_defconfig
> 
> diff --git a/configs/am335x_evm_spiboot_defconfig b/configs/am335x_evm_spiboot_defconfig
> new file mode 100644
> index 0000000000..d71a7ce75c
> --- /dev/null
> +++ b/configs/am335x_evm_spiboot_defconfig

Can you update board/ti/am335x/MAINTAINERS file?

Thanks and regards,
Lokesh

> @@ -0,0 +1,93 @@
> +CONFIG_ARM=y
> +CONFIG_ARCH_CPU_INIT=y
> +CONFIG_ARCH_OMAP2PLUS=y
> +CONFIG_TI_COMMON_CMD_OPTIONS=y
> +CONFIG_ENV_OFFSET=0x100000
> +CONFIG_SYS_SPI_U_BOOT_OFFS=0x20000
> +CONFIG_SPL_DM_SPI=y
> +CONFIG_AM33XX=y
> +# CONFIG_SPL_MMC_SUPPORT is not set
> +CONFIG_SPL=y
> +CONFIG_SPL_SPI_FLASH_SUPPORT=y
> +CONFIG_SPL_SPI_SUPPORT=y
> +CONFIG_DEFAULT_DEVICE_TREE="am335x-evm"
> +CONFIG_DISTRO_DEFAULTS=y
> +CONFIG_SPL_LOAD_FIT=y
> +CONFIG_OF_BOARD_SETUP=y
> +CONFIG_BOOTCOMMAND="if test ${boot_fit} -eq 1; then run update_to_fit; fi; run findfdt; run init_console; run envboot; run distro_bootcmd"
> +CONFIG_LOGLEVEL=3
> +CONFIG_SYS_CONSOLE_INFO_QUIET=y
> +CONFIG_VERSION_VARIABLE=y
> +CONFIG_ARCH_MISC_INIT=y
> +CONFIG_SPL_FIT_IMAGE_TINY=y
> +# CONFIG_SPL_FS_EXT4 is not set
> +CONFIG_SPL_MTD_SUPPORT=y
> +# CONFIG_SPL_NAND_SUPPORT is not set
> +CONFIG_SPL_DM_SPI_FLASH=y
> +CONFIG_SPL_SPI_LOAD=y
> +CONFIG_CMD_SPL=y
> +# CONFIG_CMD_FLASH is not set
> +CONFIG_CMD_NAND=y
> +# CONFIG_CMD_SETEXPR is not set
> +CONFIG_BOOTP_DNS2=y
> +CONFIG_CMD_MTDPARTS=y
> +# CONFIG_SPL_EFI_PARTITION is not set
> +CONFIG_OF_CONTROL=y
> +CONFIG_OF_LIST="am335x-evm am335x-bone am335x-boneblack am335x-evmsk am335x-bonegreen am335x-icev2 am335x-pocketbeagle"
> +CONFIG_ENV_OVERWRITE=y
> +# CONFIG_ENV_IS_IN_FAT is not set
> +CONFIG_ENV_IS_IN_SPI_FLASH=y
> +CONFIG_SYS_RELOC_GD_ENV_ADDR=y
> +CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
> +CONFIG_SPL_ENV_IS_NOWHERE=y
> +CONFIG_BOOTP_SEND_HOSTNAME=y
> +CONFIG_BOOTCOUNT_LIMIT=y
> +CONFIG_CLK=y
> +CONFIG_CLK_CDCE9XX=y
> +CONFIG_DFU_TFTP=y
> +CONFIG_DFU_MMC=y
> +CONFIG_DFU_NAND=y
> +CONFIG_DFU_RAM=y
> +CONFIG_USB_FUNCTION_FASTBOOT=y
> +CONFIG_FASTBOOT_FLASH=y
> +CONFIG_FASTBOOT_FLASH_MMC_DEV=1
> +CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
> +CONFIG_DM_I2C=y
> +CONFIG_MISC=y
> +CONFIG_DM_MMC=y
> +# CONFIG_SPL_DM_MMC is not set
> +# CONFIG_MMC_HW_PARTITIONING is not set
> +CONFIG_MMC_OMAP_HS=y
> +CONFIG_MTD=y
> +CONFIG_MTD_RAW_NAND=y
> +# CONFIG_SPL_NAND_AM33XX_BCH is not set
> +CONFIG_DM_SPI_FLASH=y
> +CONFIG_SF_DEFAULT_SPEED=24000000
> +CONFIG_SPI_FLASH_WINBOND=y
> +CONFIG_PHY_ATHEROS=y
> +CONFIG_PHY_SMSC=y
> +CONFIG_DM_ETH=y
> +CONFIG_MII=y
> +CONFIG_DRIVER_TI_CPSW=y
> +CONFIG_SPI=y
> +CONFIG_DM_SPI=y
> +CONFIG_OMAP3_SPI=y
> +CONFIG_TIMER=y
> +CONFIG_OMAP_TIMER=y
> +CONFIG_USB=y
> +CONFIG_DM_USB=y
> +CONFIG_DM_USB_GADGET=y
> +CONFIG_USB_MUSB_HOST=y
> +CONFIG_USB_MUSB_GADGET=y
> +CONFIG_USB_MUSB_TI=y
> +CONFIG_USB_GADGET=y
> +CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments"
> +CONFIG_USB_GADGET_VENDOR_NUM=0x0451
> +CONFIG_USB_GADGET_PRODUCT_NUM=0xd022
> +CONFIG_USB_ETHER=y
> +CONFIG_WDT=y
> +# CONFIG_SPL_WDT is not set
> +CONFIG_DYNAMIC_CRC_TABLE=y
> +CONFIG_RSA=y
> +CONFIG_LZO=y
> +# CONFIG_OF_LIBFDT_OVERLAY is not set
>