What is the status of IMX8MM USB support?

Tim Harvey tharvey at gateworks.com
Mon Sep 28 23:48:34 CEST 2020


On Thu, Sep 24, 2020 at 10:49 PM Peng Fan <peng.fan at nxp.com> wrote:
>
> Hi Tim,
>
> > Subject: What is the status of IMX8MM USB support?
> >
> > Greetings,
> >
> > I have not seen any activity to enable USB support for the IMX8MM. Is
> > anyone working on this? Last I knew the holdup had to do with a
> > power-domain driver.
>
> For U-Boot, although I am trying to clean up NXP usb patches, but have
> not find time to enable i.MX8MM.
>
> For Kernel, I think it is still stuck in power domain part.
> Let's see whether we could move to SCMI again considerting power domain
> notified patches from Uff are under reviewing.
>

Peng,

Thanks for the update. Seeing IMX8MM support would be very helpful as
that would allow SDP support for mainline U-Boot to aid in board
bringup.

Yes, for kernel it appears to just be the power domain as if that gets
enabled the existing drivers upstream work fine.

Tim


More information about the U-Boot mailing list