[PATCH v2 3/3] arm64: Add support for larger PIE U-boot

[Edgar E. Iglesias]

From: "Edgar E. Iglesias" <edgar.iglesias at xilinx.com>

Linking a U-boot larger than 1MB fails with PIE enabled:
u-boot/arch/arm/cpu/armv8/start.S:71:(.text+0x3c): relocation
truncated to fit: R_AARCH64_ADR_PREL_LO21 against symbol `__rel_dyn_end'
defined in .bss_start section in u-boot.

This extends the supported range by using adrp & add to load symbols
early while starting up.

Signed-off-by: Edgar E. Iglesias <edgar.iglesias at xilinx.com>
---
 arch/arm/cpu/armv8/start.S | 6 ++++--
 arch/arm/lib/crt0_64.S     | 3 ++-
 2 files changed, 6 insertions(+), 3 deletions(-)

diff --git a/arch/arm/cpu/armv8/start.S b/arch/arm/cpu/armv8/start.S
index 732bc385d4..335783014c 100644
--- a/arch/arm/cpu/armv8/start.S
+++ b/arch/arm/cpu/armv8/start.S
@@ -84,8 +84,10 @@ pie_fixup:
 	adr	x0, _start		/* x0 <- Runtime value of _start */
 	ldr	x1, _TEXT_BASE		/* x1 <- Linked value of _start */
 	sub	x9, x0, x1		/* x9 <- Run-vs-link offset */
-	adr	x2, __rel_dyn_start	/* x2 <- Runtime &__rel_dyn_start */
-	adr	x3, __rel_dyn_end	/* x3 <- Runtime &__rel_dyn_end */
+	adrp    x2, __rel_dyn_start     /* x2 <- Runtime &__rel_dyn_start */
+	add     x2, x2, #:lo12:__rel_dyn_start
+	adrp    x3, __rel_dyn_end       /* x3 <- Runtime &__rel_dyn_end */
+	add     x3, x3, #:lo12:__rel_dyn_end
 pie_fix_loop:
 	ldp	x0, x1, [x2], #16	/* (x0, x1) <- (Link location, fixup) */
 	ldr	x4, [x2], #8		/* x4 <- addend */
diff --git a/arch/arm/lib/crt0_64.S b/arch/arm/lib/crt0_64.S
index 04afa518ac..f28071a238 100644
--- a/arch/arm/lib/crt0_64.S
+++ b/arch/arm/lib/crt0_64.S
@@ -102,7 +102,8 @@ ENTRY(_main)
 	adr	lr, relocation_return
 #if CONFIG_POSITION_INDEPENDENT
 	/* Add in link-vs-runtime offset */
-	adr	x0, _start		/* x0 <- Runtime value of _start */
+	adrp	x0, _start		/* x0 <- Runtime value of _start */
+	add	x0, x0, #:lo12:_start
 	ldr	x9, _TEXT_BASE		/* x9 <- Linked value of _start */
 	sub	x9, x9, x0		/* x9 <- Run-vs-link offset */
 	add	lr, lr, x9
-- 
2.25.1