[PATCH v2 39/46] usb: dwc2: Fix not calling dev_xxx with a device

Patrick DELAUNAY patrick.delaunay at st.com
Thu Sep 17 09:33:58 CEST 2020


Hi,

> From: Sean Anderson <seanga2 at gmail.com>
> Sent: mercredi 16 septembre 2020 15:44
> 
> On 9/16/20 9:30 AM, Patrick DELAUNAY wrote:
> > Hi Sean,
> >
> >> From: Sean Anderson <seanga2 at gmail.com>
> >> Sent: mardi 15 septembre 2020 16:45
> >>
> >> This adds a dev argument to some functions so dev_xxx always has a
> >> device to log with. In one instance we must use use a different log
> >> function when we are compiled without DM_USB.
> >>
> >> Signed-off-by: Sean Anderson <seanga2 at gmail.com>
> >> ---
> >>
> >> Changes in v2:
> >> - New
> >>
> >>  drivers/usb/host/dwc2.c | 39 +++++++++++++++++++++++----------------
> >>  1 file changed, 23 insertions(+), 16 deletions(-)
> >>
> >> diff --git a/drivers/usb/host/dwc2.c b/drivers/usb/host/dwc2.c index
> >> cefe9d83b1..f1d13b1c1d 100644
> >> --- a/drivers/usb/host/dwc2.c
> >> +++ b/drivers/usb/host/dwc2.c
> >> @@ -114,7 +114,8 @@ static void init_fslspclksel(struct dwc2_core_regs
> *regs)
> >>   * @param regs Programming view of DWC_otg controller.
> >>   * @param num Tx FIFO to flush.
> >>   */
> >> -static void dwc_otg_flush_tx_fifo(struct dwc2_core_regs *regs, const
> >> int num)
> >> +static void dwc_otg_flush_tx_fifo(struct udevice *dev,
> >> +				  struct dwc2_core_regs *regs, const int num)
> >>  {
> >>  	int ret;
> >>
> >> @@ -134,7 +135,8 @@ static void dwc_otg_flush_tx_fifo(struct
> >> dwc2_core_regs *regs, const int num)
> >>   *
> >>   * @param regs Programming view of DWC_otg controller.
> >>   */
> >> -static void dwc_otg_flush_rx_fifo(struct dwc2_core_regs *regs)
> >> +static void dwc_otg_flush_rx_fifo(struct udevice *dev,
> >> +				  struct dwc2_core_regs *regs)
> >>  {
> >>  	int ret;
> >>
> >> @@ -152,7 +154,8 @@ static void dwc_otg_flush_rx_fifo(struct
> >> dwc2_core_regs
> >> *regs)
> >>   * Do core a soft reset of the core.  Be careful with this because it
> >>   * resets all the internal state machines of the core.
> >>   */
> >> -static void dwc_otg_core_reset(struct dwc2_core_regs *regs)
> >> +static void dwc_otg_core_reset(struct udevice *dev,
> >> +			       struct dwc2_core_regs *regs)
> >>  {
> >>  	int ret;
> >>
> >> @@ -284,8 +287,8 @@ static void dwc_otg_core_host_init(struct udevice
> *dev,
> >>  	clrbits_le32(&regs->gotgctl, DWC2_GOTGCTL_HSTSETHNPEN);
> >>
> >>  	/* Make sure the FIFOs are flushed. */
> >> -	dwc_otg_flush_tx_fifo(regs, 0x10);	/* All Tx FIFOs */
> >> -	dwc_otg_flush_rx_fifo(regs);
> >> +	dwc_otg_flush_tx_fifo(dev, regs, 0x10);	/* All Tx FIFOs */
> >> +	dwc_otg_flush_rx_fifo(dev, regs);
> >>
> >>  	/* Flush out any leftover queued requests. */
> >>  	num_channels = readl(&regs->ghwcfg2); @@ -306,7 +309,7 @@ static
> >> void dwc_otg_core_host_init(struct udevice *dev,
> >>  		ret = wait_for_bit_le32(&regs->hc_regs[i].hcchar,
> >>  					DWC2_HCCHAR_CHEN, false, 1000,
> >> false);
> >>  		if (ret)
> >> -			dev_info("%s: Timeout!\n", __func__);
> >> +			dev_info(dev, "%s: Timeout!\n", __func__);
> >>  	}
> >>
> >>  	/* Turn on the vbus power. */
> >> @@ -330,8 +333,9 @@ static void dwc_otg_core_host_init(struct udevice
> *dev,
> >>   *
> >>   * @param regs Programming view of the DWC_otg controller
> >>   */
> >> -static void dwc_otg_core_init(struct dwc2_priv *priv)
> >> +static void dwc_otg_core_init(struct udevice *dev)
> >>  {
> >> +	struct dwc2_priv *priv = dev_get_priv(dev);
> >>  	struct dwc2_core_regs *regs = priv->regs;
> >>  	uint32_t ahbcfg = 0;
> >>  	uint32_t usbcfg = 0;
> >> @@ -360,7 +364,7 @@ static void dwc_otg_core_init(struct dwc2_priv *priv)
> >>  	writel(usbcfg, &regs->gusbcfg);
> >>
> >>  	/* Reset the Controller */
> >> -	dwc_otg_core_reset(regs);
> >> +	dwc_otg_core_reset(dev, regs);
> >>
> >>  	/*
> >>  	 * This programming sequence needs to happen in FS mode before @@ -
> >> 372,7 +376,7 @@ static void dwc_otg_core_init(struct dwc2_priv *priv)
> >>  	setbits_le32(&regs->gusbcfg, DWC2_GUSBCFG_PHYSEL);
> >>
> >>  	/* Reset after a PHY select */
> >> -	dwc_otg_core_reset(regs);
> >> +	dwc_otg_core_reset(dev, regs);
> >>
> >>  	/*
> >>  	 * Program DCFG.DevSpd or HCFG.FSLSPclkSel to 48Mhz in FS.
> >> @@ -419,7 +423,7 @@ static void dwc_otg_core_init(struct dwc2_priv *priv)
> >>  	writel(usbcfg, &regs->gusbcfg);
> >>
> >>  	/* Reset after setting the PHY parameters */
> >> -	dwc_otg_core_reset(regs);
> >> +	dwc_otg_core_reset(dev, regs);
> >>  #endif
> >>
> >>  	usbcfg = readl(&regs->gusbcfg);
> >> @@ -1128,7 +1132,12 @@ int _submit_int_msg(struct dwc2_priv *priv,
> >> struct usb_device *dev,
> >>  	timeout = get_timer(0) + USB_TIMEOUT_MS(pipe);
> >>  	for (;;) {
> >>  		if (get_timer(0) > timeout) {
> >> -			dev_err(dev, "Timeout poll on interrupt endpoint\n");
> >> +#if CONFIG_IS_ENABLED(DM_USB)
> >> +			dev_err(dev->dev,
> >> +				"Timeout poll on interrupt endpoint\n"); #else
> >> +			log_err("Timeout poll on interrupt endpoint\n"); #endif
> >>  			return -ETIMEDOUT;
> >>  		}
> >>  		ret = _submit_bulk_msg(priv, dev, pipe, buffer, len); @@ -1194,7
> >> +1203,7 @@ static int dwc2_init_common(struct udevice *dev, struct
> >> +dwc2_priv
> >> *priv)
> >>  	priv->ext_vbus = 0;
> >>  #endif
> >>
> >> -	dwc_otg_core_init(priv);
> >> +	dwc_otg_core_init(dev);
> >>  	dwc_otg_core_host_init(dev, regs);
> >>
> >>  	clrsetbits_le32(&regs->hprt0, DWC2_HPRT0_PRTENA | @@ -1320,12
> >> +1329,10 @@ static int dwc2_submit_int_msg(struct udevice *dev,
> >> +struct
> >> usb_device *udev,  static int dwc2_usb_ofdata_to_platdata(struct udevice
> *dev)  {
> >>  	struct dwc2_priv *priv = dev_get_priv(dev);
> >> -	fdt_addr_t addr;
> >>
> >> -	addr = dev_read_addr(dev);
> >> -	if (addr == FDT_ADDR_T_NONE)
> >> +	priv->regs = dev_read_addr_ptr(dev);
> >> +	if (!priv->regs)
> >>  		return -EINVAL;
> >> -	priv->regs = (struct dwc2_core_regs *)addr;
> >>
> >>  	priv->oc_disable = dev_read_bool(dev, "disable-over-current");
> >>  	priv->hnp_srp_disable = dev_read_bool(dev, "hnp-srp-disable");
> >> --
> >> 2.28.0
> >
> >
> > Reviewed-by: Patrick Delaunay <patrick.delaunay at st.com>
> >
> > I had just a concern about the addition of dev parameter when regs
> > exist in dwc_otg_flush_rx_fifo,  dwc_otg_flush_rx_fifo  and
> > dwc_otg_core_reset
> >
> > struct udevice *dev,
> > struct dwc2_core_regs *regs,
> >
> > as regs can be found in dev, I think that duplicate the parameter without need....
> >
> > 	struct dwc2_priv *priv = dev_get_priv(dev);
> >   	struct dwc2_core_regs *regs = priv->regs;
> >
> > but it is also the case in existing function, for example :
> >
> > dwc_otg_core_host_init(dev, regs);
> 
> So if I understand correctly, you would you prefer something like
> 
> -static void dwc_otg_flush_rx_fifo(struct dwc2_core_regs *regs)
> +static void dwc_otg_flush_rx_fifo(struct udevice *dev)
>  {
>  	int ret;
> +	struct dwc2_priv *priv = dev_get_priv(dev);
> +   	struct dwc2_core_regs *regs = priv->regs;
> 
> --Sean

Yes exactly.

Because I assume that dev_get_priv() is just a macro to access dev element,
so my proposal don't increase the code size / the execution time.

But I check it yesterday, because I start to migrate all stm32 driver to log API and it is not the case...

drivers/core/device.c:545

void *dev_get_priv(const struct udevice *dev)
{
	if (!dev) {
		dm_warn("%s: null device\n", __func__);
		return NULL;
	}

	return dev->priv;
}

So now, I don't sure that duplicate the call to dev_get_priv() is a good solution.
And I think your first solution is correct.

Sorry for disturbance

Patrick


More information about the U-Boot mailing list