[PATCH v2 2/2] microblaze: start.S: Use board_init_f_alloc/init in early init

Ovidiu Panait ovidiu.panait at windriver.com
Thu Sep 24 10:54:37 CEST 2020


Implement early init by calling generic board_init_f_alloc_reserve and
board_init_f_init_reserve functions:
* drop SYS_MALLOC_F_LEN related code, as allocation and gd->malloc_base
  assignment are taken care of by the generic functions
* drop _gd logic

Cc: Michal Simek <monstr at monstr.eu>
Signed-off-by: Ovidiu Panait <ovidiu.panait at windriver.com>
---
v2:
- do not set stack high protection twice
- remove CONFIG_SYS_MALLOC_F_LEN from CONFIG_SPL_STACK_ADDR computation

 arch/microblaze/cpu/start.S          | 46 +++++++++++++---------------
 include/configs/microblaze-generic.h |  3 +-
 2 files changed, 23 insertions(+), 26 deletions(-)

diff --git a/arch/microblaze/cpu/start.S b/arch/microblaze/cpu/start.S
index b9c6ccc912..9479737aa2 100644
--- a/arch/microblaze/cpu/start.S
+++ b/arch/microblaze/cpu/start.S
@@ -17,25 +17,39 @@ _start:
 
 	addi	r8, r0, __end
 	mts	rslr, r8
-	/* TODO: Redo this code to call board_init_f_*() */
+
 #if defined(CONFIG_SPL_BUILD)
 	addi	r1, r0, CONFIG_SPL_STACK_ADDR
-	mts	rshr, r1
-	addi	r1, r1, -4	/* Decrement SP to top of memory */
-#else
-#if CONFIG_VAL(SYS_MALLOC_F_LEN)
-	addi	r1, r0, CONFIG_SYS_INIT_SP_OFFSET - CONFIG_VAL(SYS_MALLOC_F_LEN)
 #else
 	addi	r1, r0, CONFIG_SYS_INIT_SP_OFFSET
 #endif
-	mts	rshr, r1
+
 	addi	r1, r1, -4	/* Decrement SP to top of memory */
 
+	/* Call board_init_f_alloc_reserve with the current stack pointer as
+	 * parameter. */
+	add	r5, r0, r1
+	bralid	r15, board_init_f_alloc_reserve
+	nop
+
+	/* board_init_f_alloc_reserve returns a pointer to the allocated area
+	 * in r3. Set the new stack pointer below this area. */
+	add	r1, r0, r3
+	mts	rshr, r1
+	addi	r1, r1, -4
+
+	/* Call board_init_f_init_reserve with the address returned by
+	 * board_init_f_alloc_reserve as parameter. */
+	add	r5, r0, r3
+	bralid	r15, board_init_f_init_reserve
+	nop
+
+#if !defined(CONFIG_SPL_BUILD)
 	/* Setup vectors with pre-relocation symbols */
 	or	r5, r0, r0
 	bralid	r15, __setup_exceptions
 	nop
-#endif /* CONFIG_SPL_BUILD */
+#endif
 
 	/* Flush cache before enable cache */
 	addik	r5, r0, 0
@@ -48,7 +62,6 @@ _start:
 	ori	r12, r12, 0x1a0
 	mts	rmsr, r12
 
-	/* TODO: Redo this code to call board_init_f_*() */
 clear_bss:
 	/* clear BSS segments */
 	addi	r5, r0, __bss_start
@@ -67,27 +80,12 @@ clear_bss:
 #endif
 #ifndef CONFIG_SPL_BUILD
 	or	r5, r0, r0	/* flags - empty */
-	addi    r31, r0, _gd
-#if CONFIG_VAL(SYS_MALLOC_F_LEN)
-	addi	r6, r0, CONFIG_SYS_INIT_SP_OFFSET
-	swi	r6, r31, GD_MALLOC_BASE
-#endif
 	brai	board_init_f
 #else
-	addi	r31, r0, _gd
-#if CONFIG_VAL(SYS_MALLOC_F_LEN)
-	addi	r6, r0, CONFIG_SPL_STACK_ADDR
-	swi	r6, r31, GD_MALLOC_BASE
-#endif
 	brai	board_init_r
 #endif
 1:	bri	1b
 
- .section .bss
-.align 4
-_gd:
-         .space  GENERATED_GBL_DATA_SIZE
-
 #ifndef CONFIG_SPL_BUILD
 	.text
 	.ent	__setup_exceptions
diff --git a/include/configs/microblaze-generic.h b/include/configs/microblaze-generic.h
index 8ca0e83c78..dfc2cd97d3 100644
--- a/include/configs/microblaze-generic.h
+++ b/include/configs/microblaze-generic.h
@@ -167,8 +167,7 @@
 #define CONFIG_SYS_INIT_RAM_SIZE	0x100000
 
 # define CONFIG_SPL_STACK_ADDR		(CONFIG_SYS_INIT_RAM_ADDR + \
-					 CONFIG_SYS_INIT_RAM_SIZE - \
-					 CONFIG_SYS_MALLOC_F_LEN)
+					 CONFIG_SYS_INIT_RAM_SIZE)
 
 /* Just for sure that there is a space for stack */
 #define CONFIG_SPL_STACK_SIZE		0x100
-- 
2.25.1



More information about the U-Boot mailing list