[PATCH v2 0/5] powerpc, mpc83xx: add DM_ETH support
Tom Rini
trini at konsulko.com
Thu Sep 17 22:38:32 CEST 2020
On Thu, Sep 17, 2020 at 03:03:28PM +0200, Heiko Schocher wrote:
> Hello Tom,
>
> Am 17.09.2020 um 14:51 schrieb Tom Rini:
> > On Thu, Sep 17, 2020 at 06:27:03AM +0200, Heiko Schocher wrote:
> > > Hello Tom,
> > >
> > > Am 16.09.2020 um 21:01 schrieb Tom Rini:
> > > > On Wed, Sep 16, 2020 at 07:04:57AM +0200, Heiko Schocher wrote:
> > > > > Hello Mario, Tom,
> > > > >
> > > > > added Tom to cc ...
> > > > >
> > > > > Am 08.09.2020 um 07:59 schrieb Heiko Schocher:
> > > > > > Hi Mario,
> > > > > >
> > > > > > Am 17.08.2020 um 07:23 schrieb Heiko Schocher:
> > > > > > > Hello Mario,
> > > > > > >
> > > > > > > Am 27.05.2020 um 14:43 schrieb Heiko Schocher:
> > > > > > > >
> > > > > > > > This patch series adds DM ethernet support for mpc83xx based
> > > > > > > > keymile boards.
> > > > > > > >
> > > > > > > > Travis build:
> > > > > > > > https://travis-ci.org/github/hsdenx/u-boot-test/builds/691607214
> > > > > > > >
> > > > > > > >
> > > > > > > > Changes in v2:
> > > > > > > > - new in v2
> > > > > > > > - remove RFC
> > > > > > > > - fixed Codingstyle errors, therefore new patch
> > > > > > > > powerpc, mpc83xx: fix codingstyle issues for qe_io.c
> > > > > > > > - moved DM part to drivers/pinctrl
> > > > > > > > - add comments from Qiang Zhao:
> > > > > > > > - add device node documentation
> > > > > > > > - I did not drop the dm_qe_uec_phy.c and use drivers/net/fsl_mdio.c
> > > > > > > > because using drivers/net/fsl_mdio.c leads in none existent
> > > > > > > > udevice mdio at 3320
> > > > > > > > instead boards with DM ETH support should use now this
> > > > > > > > driver.
> > > > > > > > - remove RFC tag
> > > > > > > > - add patch which fixes Codingstyle errors in drivers/qe
> > > > > > > > - add patch which converts the mpc83xx based boards from
> > > > > > > > keymile to DM_ETH
> > > > > > > >
> > > > > > > > Heiko Schocher (5):
> > > > > > > > mpc83xx: remove unneeded extern declaration in cpu_init
> > > > > > > > powerpc, qe: fix codingstyle issues for drivers/qe
> > > > > > > > powerpc, qe: add DTS support for parallel I/O ports
> > > > > > > > net, qe: add DM support for QE UEC ethernet
> > > > > > > > mpc83xx, keymile boards: enable DM_ETH and add DTS
> > > > > > > >
> > > > > > > > arch/powerpc/cpu/mpc83xx/Kconfig | 8 +
> > > > > > > > arch/powerpc/cpu/mpc83xx/Makefile | 2 +
> > > > > > > > arch/powerpc/cpu/mpc83xx/cpu_init.c | 11 +-
> > > > > > > > arch/powerpc/cpu/mpc83xx/qe_io.c | 98 +-
> > > > > > > > arch/powerpc/dts/Makefile | 8 +
> > > > > > > > arch/powerpc/dts/km8309-uboot.dtsi | 33 +
> > > > > > > > arch/powerpc/dts/km8321-uboot.dtsi | 67 +
> > > > > > > > arch/powerpc/dts/km8321.dtsi | 220 ++++
> > > > > > > > arch/powerpc/dts/km836x-uboot.dtsi | 61 +
> > > > > > > > arch/powerpc/dts/km836x.dtsi | 182 +++
> > > > > > > > arch/powerpc/dts/kmcoge5ne-uboot.dtsi | 22 +
> > > > > > > > arch/powerpc/dts/kmcoge5ne.dts | 320 +++++
> > > > > > > > arch/powerpc/dts/kmeter1-uboot.dtsi | 42 +
> > > > > > > > arch/powerpc/dts/kmeter1.dts | 480 +++++++
> > > > > > > > arch/powerpc/dts/kmopti2.dts | 161 +++
> > > > > > > > arch/powerpc/dts/kmsupc5.dts | 139 ++
> > > > > > > > arch/powerpc/dts/kmsupm5.dts | 129 ++
> > > > > > > > arch/powerpc/dts/kmtegr1.dts | 392 ++++++
> > > > > > > > arch/powerpc/dts/kmtepr2.dts | 142 ++
> > > > > > > > arch/powerpc/dts/kmtuge1.dts | 100 ++
> > > > > > > > arch/powerpc/dts/kmtuxa1.dts | 100 ++
> > > > > > > > board/keymile/km83xx/Kconfig | 17 +
> > > > > > > > board/keymile/km83xx/MAINTAINERS | 23 +-
> > > > > > > > board/keymile/km83xx/km83xx.c | 64 -
> > > > > > > > configs/kmcoge5ne_defconfig | 11 +-
> > > > > > > > configs/kmeter1_defconfig | 10 +-
> > > > > > > > configs/kmopti2_defconfig | 11 +-
> > > > > > > > configs/kmsupx5_defconfig | 10 +-
> > > > > > > > configs/kmtegr1_defconfig | 12 +-
> > > > > > > > configs/kmtepr2_defconfig | 10 +-
> > > > > > > > configs/tuge1_defconfig | 10 +-
> > > > > > > > configs/tuxx1_defconfig | 11 +-
> > > > > > > > .../soc/fsl/cpm_qe/qe/ucc.txt | 53 +
> > > > > > > > drivers/net/Kconfig | 2 +
> > > > > > > > drivers/net/Makefile | 1 +
> > > > > > > > drivers/net/qe/Kconfig | 9 +
> > > > > > > > drivers/net/qe/Makefile | 5 +
> > > > > > > > drivers/net/qe/dm_qe_uec.c | 1167 +++++++++++++++++
> > > > > > > > drivers/net/qe/dm_qe_uec.h | 22 +
> > > > > > > > drivers/net/qe/dm_qe_uec_phy.c | 163 +++
> > > > > > > > drivers/net/qe/uccf.c | 507 +++++++
> > > > > > > > drivers/net/qe/uccf.h | 119 ++
> > > > > > > > drivers/net/qe/uec.h | 693 ++++++++++
> > > > > > > > drivers/pinctrl/Kconfig | 7 +
> > > > > > > > drivers/pinctrl/Makefile | 1 +
> > > > > > > > drivers/pinctrl/pinctrl-qe-io.c | 255 ++++
> > > > > > > > drivers/qe/qe.c | 96 +-
> > > > > > > > drivers/qe/uccf.c | 449 ++++---
> > > > > > > > drivers/qe/uccf.h | 90 +-
> > > > > > > > drivers/qe/uec.c | 598 ++++-----
> > > > > > > > drivers/qe/uec.h | 381 +++---
> > > > > > > > drivers/qe/uec_phy.c | 334 ++---
> > > > > > > > drivers/qe/uec_phy.h | 71 +-
> > > > > > > > include/configs/km/km-mpc832x.h | 14 -
> > > > > > > > include/configs/km/km-mpc8360.h | 14 -
> > > > > > > > include/configs/km/km-mpc83xx.h | 10 -
> > > > > > > > include/fsl_qe.h | 3 +
> > > > > > > > 57 files changed, 6826 insertions(+), 1144 deletions(-)
> > > > > > > > create mode 100644 arch/powerpc/dts/km8309-uboot.dtsi
> > > > > > > > create mode 100644 arch/powerpc/dts/km8321-uboot.dtsi
> > > > > > > > create mode 100644 arch/powerpc/dts/km8321.dtsi
> > > > > > > > create mode 100644 arch/powerpc/dts/km836x-uboot.dtsi
> > > > > > > > create mode 100644 arch/powerpc/dts/km836x.dtsi
> > > > > > > > create mode 100644 arch/powerpc/dts/kmcoge5ne-uboot.dtsi
> > > > > > > > create mode 100644 arch/powerpc/dts/kmcoge5ne.dts
> > > > > > > > create mode 100644 arch/powerpc/dts/kmeter1-uboot.dtsi
> > > > > > > > create mode 100644 arch/powerpc/dts/kmeter1.dts
> > > > > > > > create mode 100644 arch/powerpc/dts/kmopti2.dts
> > > > > > > > create mode 100644 arch/powerpc/dts/kmsupc5.dts
> > > > > > > > create mode 100644 arch/powerpc/dts/kmsupm5.dts
> > > > > > > > create mode 100644 arch/powerpc/dts/kmtegr1.dts
> > > > > > > > create mode 100644 arch/powerpc/dts/kmtepr2.dts
> > > > > > > > create mode 100644 arch/powerpc/dts/kmtuge1.dts
> > > > > > > > create mode 100644 arch/powerpc/dts/kmtuxa1.dts
> > > > > > > > create mode 100644 doc/device-tree-bindings/soc/fsl/cpm_qe/qe/ucc.txt
> > > > > > > > create mode 100644 drivers/net/qe/Kconfig
> > > > > > > > create mode 100644 drivers/net/qe/Makefile
> > > > > > > > create mode 100644 drivers/net/qe/dm_qe_uec.c
> > > > > > > > create mode 100644 drivers/net/qe/dm_qe_uec.h
> > > > > > > > create mode 100644 drivers/net/qe/dm_qe_uec_phy.c
> > > > > > > > create mode 100644 drivers/net/qe/uccf.c
> > > > > > > > create mode 100644 drivers/net/qe/uccf.h
> > > > > > > > create mode 100644 drivers/net/qe/uec.h
> > > > > > > > create mode 100644 drivers/pinctrl/pinctrl-qe-io.c
> > > > > > >
> > > > > > > gentle ping!
> > > > > > >
> > > > > > > I got no reviews, comments for this patchseries ...
> > > > > > >
> > > > > > > any comments?
> > > > > >
> > > > > > ping?
> > > > > >
> > > > > > I have a rebased version in the meantime, but I would wait for
> > > > > > any comments...
> > > > >
> > > > > gentle ping...
> > > > >
> > > > > @Tom: Mario seems to busy .. how to proceed here with this patches?
> > > >
> > > > Can you put together something for me to pull in to -next please?
> > > > Thanks!
> > >
> > > Ok, pushed them to a repo on github:
> > >
> > > https://github.com/hsdenx/u-boot-test/tree/kmcoge5ne-dm-ethernet-devel
> > >
> > > started travis build for this branch:
> > > https://travis-ci.org/github/hsdenx/u-boot-test/builds/727904421
> > >
> > > If all builds fine, I can send a pull request ... is it ok for
> > > you if I push this branch to u-boot-i2c kmcoge5ne-dm-ethernet-devel?
> >
> > Works for me, thanks!
>
> Ok, travis build is fine, so here the pull request:
>
> The following changes since commit bd4e8944cf7e36f8ad39466c40f8fc197c9df1c5:
>
> Merge tag 'ti-v2021.01-next' of
> https://gitlab.denx.de/u-boot/custodians/u-boot-ti into next (2020-09-15
> 15:22:00 -0400)
>
> are available in the Git repository at:
>
> https://gitlab.denx.de/u-boot/custodians/u-boot-i2c.git tags/for-v2021.01-next
>
> for you to fetch changes up to 7bdfe8592956439743cad3c2d3ff5f24c4dd5aa9:
>
> mpc83xx, keymile boards: enable DM_ETH and add DTS (2020-09-17 06:09:54 +0200)
>
Applied to u-boot/next, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 659 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20200917/6d2960a9/attachment.sig>
More information about the U-Boot
mailing list