configs: lx2162aqds: enable CONFIG_BOARD_EARLY_INIT_R

[Yangbo Lu]

From: Guanhua Gao <guanhua.gao at nxp.com>

From: Yangbo Lu <yangbo.lu at nxp.com>

Enable CONFIG_BOARD_EARLY_INIT_R for SDHC adapter card
identification and configuration.

Signed-off-by: Yangbo Lu <yangbo.lu at nxp.com>

diff --git a/configs/lx2162aqds_tfa_SECURE_BOOT_defconfig b/configs/lx2162aqds_tfa_SECURE_BOOT_defconfig
index 9b1850c..e658592 100644
--- a/configs/lx2162aqds_tfa_SECURE_BOOT_defconfig
+++ b/configs/lx2162aqds_tfa_SECURE_BOOT_defconfig
@@ -16,6 +16,7 @@ CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyAMA0,115200 root=/dev/ram0 earlycon=pl011,mmio32,0x21c0000 ramdisk_size=0x2000000 default_hugepagesz=1024m hugepagesz=1024m hugepages=2 pci=pcie_bus_perf"
 # CONFIG_USE_BOOTCOMMAND is not set
+CONFIG_BOARD_EARLY_INIT_R=y
 CONFIG_MISC_INIT_R=y
 CONFIG_CMD_GREPENV=y
 CONFIG_CMD_EEPROM=y
diff --git a/configs/lx2162aqds_tfa_defconfig b/configs/lx2162aqds_tfa_defconfig
index 07837b9..ade6b7b 100644
--- a/configs/lx2162aqds_tfa_defconfig
+++ b/configs/lx2162aqds_tfa_defconfig
@@ -18,6 +18,7 @@ CONFIG_BOOTDELAY=10
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyAMA0,115200 root=/dev/ram0 earlycon=pl011,mmio32,0x21c0000 ramdisk_size=0x2000000 default_hugepagesz=1024m hugepagesz=1024m hugepages=2 pci=pcie_bus_perf"
 # CONFIG_USE_BOOTCOMMAND is not set
+CONFIG_BOARD_EARLY_INIT_R=y
 CONFIG_MISC_INIT_R=y
 CONFIG_CMD_GREPENV=y
 CONFIG_CMD_EEPROM=y
diff --git a/configs/lx2162aqds_tfa_verified_boot_defconfig b/configs/lx2162aqds_tfa_verified_boot_defconfig
index 5d4ad47..3131fb3 100644
--- a/configs/lx2162aqds_tfa_verified_boot_defconfig
+++ b/configs/lx2162aqds_tfa_verified_boot_defconfig
@@ -20,6 +20,7 @@ CONFIG_BOOTDELAY=10
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyAMA0,115200 root=/dev/ram0 earlycon=pl011,mmio32,0x21c0000 ramdisk_size=0x2000000 default_hugepagesz=1024m hugepagesz=1024m hugepages=2 pci=pcie_bus_perf"
 # CONFIG_USE_BOOTCOMMAND is not set
+CONFIG_BOARD_EARLY_INIT_R=y
 CONFIG_MISC_INIT_R=y
 CONFIG_CMD_GREPENV=y
 CONFIG_CMD_EEPROM=y