[PATCH v2] mx6qsabrelite: increase the environment offset

Tom Rini trini at konsulko.com
Tue Sep 15 14:49:02 CEST 2020


On Tue, Sep 15, 2020 at 02:37:14PM +0300, Denis Pynkin wrote:

> The size of the binary created with the default U-boot config is much
> greater than the default offset for environment `0x60000`.
> In case if that binary is used for booting via MMC it is overlapped with
> the environment stored on MMC.
> This leads to U-Boot corruption while saving environment with `saveenv`
> command and non-bootable SabreLite board.
> 
> The offset for environment `CONFIG_ENV_OFFSET=0x60000` was added in
> commit a09fea1 but did not count in the change to `0xC0000` if option
> `CONFIG_ENV_IS_IN_MMC` is used.
> 
> The offset is also used for variant with environment saving onto SPI NOR
> flash (with enabled option `CONFIG_ENV_IS_IN_SPI_FLASH`). In that case the
> U-Boot binary flashed on SPI NOR is also corrupted after environment
> saving with the original 0x60000 offset.
> 
> Signed-off-by: Denis Pynkin <denis.pynkin at collabora.com>

Thanks for rewording.

Reviewed-by: Tom Rini <trini at konsulko.com>

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 659 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20200915/0ce4521e/attachment.sig>


More information about the U-Boot mailing list