[PATCH 4/4] arm: rmobile: Add HopeRun HiHope RZ/G2M board support
Biju Das
biju.das.jz at bp.renesas.com
Tue Sep 15 16:36:30 CEST 2020
The HiHope RZ/G2M board from HopeRun consists of main board
(HopeRun HiHope RZ/G2M main board) and sub board(HopeRun
HiHope RZ/G2M sub board). The HiHope RZ/G2M sub board sits
below the HiHope RZ/G2M main board.
DTS files apart from r8a774a1-hihope-rzg2m-u-boot.dts and
r8a774a1-u-boot.dtsi have been imported from Linux kernel 5.9-rc4 commit
f4d51dffc6c0 ("Linux 5.9-rc4")
This patch adds the required board support to boot HopeRun HiHope
RZ/G2M board.
Signed-off-by: Biju Das <biju.das.jz at bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj at bp.renesas.com>
---
arch/arm/dts/Makefile | 1 +
arch/arm/dts/hihope-common.dtsi | 377 ++++++++++++++++++
arch/arm/dts/hihope-rev4.dtsi | 124 ++++++
arch/arm/dts/hihope-rzg2-ex.dtsi | 93 +++++
arch/arm/dts/r8a774a1-hihope-rzg2m-ex.dts | 21 +
arch/arm/dts/r8a774a1-hihope-rzg2m-u-boot.dts | 9 +
arch/arm/dts/r8a774a1-hihope-rzg2m.dts | 37 ++
arch/arm/dts/r8a774a1-u-boot.dtsi | 55 +++
arch/arm/mach-rmobile/Kconfig.64 | 14 +
board/hoperun/hihope-rzg2/Kconfig | 15 +
board/hoperun/hihope-rzg2/MAINTAINERS | 6 +
board/hoperun/hihope-rzg2/Makefile | 9 +
board/hoperun/hihope-rzg2/hihope-rzg2.c | 177 ++++++++
configs/hihope_rzg2_defconfig | 73 ++++
include/configs/hihope-rzg2.h | 20 +
15 files changed, 1031 insertions(+)
create mode 100644 arch/arm/dts/hihope-common.dtsi
create mode 100644 arch/arm/dts/hihope-rev4.dtsi
create mode 100644 arch/arm/dts/hihope-rzg2-ex.dtsi
create mode 100644 arch/arm/dts/r8a774a1-hihope-rzg2m-ex.dts
create mode 100644 arch/arm/dts/r8a774a1-hihope-rzg2m-u-boot.dts
create mode 100644 arch/arm/dts/r8a774a1-hihope-rzg2m.dts
create mode 100644 arch/arm/dts/r8a774a1-u-boot.dtsi
create mode 100644 board/hoperun/hihope-rzg2/Kconfig
create mode 100644 board/hoperun/hihope-rzg2/MAINTAINERS
create mode 100644 board/hoperun/hihope-rzg2/Makefile
create mode 100644 board/hoperun/hihope-rzg2/hihope-rzg2.c
create mode 100644 configs/hihope_rzg2_defconfig
create mode 100644 include/configs/hihope-rzg2.h
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index f8f529435b..ce7b561fcb 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -784,6 +784,7 @@ dtb-$(CONFIG_RCAR_GEN2) += \
dtb-$(CONFIG_RCAR_GEN3) += \
r8a774a1-beacon-rzg2m-kit.dtb \
+ r8a774a1-hihope-rzg2m-u-boot.dtb \
r8a77950-ulcb-u-boot.dtb \
r8a77950-salvator-x-u-boot.dtb \
r8a77960-ulcb-u-boot.dtb \
diff --git a/arch/arm/dts/hihope-common.dtsi b/arch/arm/dts/hihope-common.dtsi
new file mode 100644
index 0000000000..51eb74fbe9
--- /dev/null
+++ b/arch/arm/dts/hihope-common.dtsi
@@ -0,0 +1,377 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the HiHope RZ/G2H Rev.4.0 and
+ * HiHope RZ/G2[MN] Rev.[2.0/3.0/4.0] main board common parts
+ *
+ * Copyright (C) 2020 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ aliases {
+ serial0 = &scif2;
+ serial1 = &hscif0;
+ };
+
+ chosen {
+ bootargs = "ignore_loglevel";
+ stdout-path = "serial0:115200n8";
+ };
+
+ hdmi0-out {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi0_con: endpoint {
+ remote-endpoint = <&rcar_dw_hdmi0_out>;
+ };
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led1 {
+ gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>;
+ };
+
+ led2 {
+ gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>;
+ };
+
+ led3 {
+ gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
+ };
+
+ led4 {
+ gpios = <&gpio6 11 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ reg_1p8v: regulator0 {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_3p3v: regulator1 {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sound_card: sound {
+ compatible = "audio-graph-card";
+
+ label = "rcar-sound";
+
+ dais = <&rsnd_port>;
+ };
+
+ vbus0_usb2: regulator-vbus0-usb2 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "USB20_VBUS0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+
+ gpio = <&gpio6 16 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ vccq_sdhi0: regulator-vccq-sdhi0 {
+ compatible = "regulator-gpio";
+
+ regulator-name = "SDHI0 VccQ";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpios = <&gpio6 30 GPIO_ACTIVE_HIGH>;
+ gpios-states = <1>;
+ states = <3300000 1>, <1800000 0>;
+ };
+
+ x302_clk: x302-clock {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <33000000>;
+ };
+
+ x304_clk: x304-clock {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <25000000>;
+ };
+};
+
+&audio_clk_a {
+ clock-frequency = <22579200>;
+};
+
+&du {
+ status = "okay";
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&extal_clk {
+ clock-frequency = <16666666>;
+};
+
+&extalr_clk {
+ clock-frequency = <32768>;
+};
+
+&gpio6 {
+ usb1-reset {
+ gpio-hog;
+ gpios = <10 GPIO_ACTIVE_LOW>;
+ output-low;
+ line-name = "usb1-reset";
+ };
+};
+
+&hdmi0 {
+ status = "okay";
+
+ ports {
+ port at 1 {
+ reg = <1>;
+ rcar_dw_hdmi0_out: endpoint {
+ remote-endpoint = <&hdmi0_con>;
+ };
+ };
+ port at 2 {
+ reg = <2>;
+ dw_hdmi0_snd_in: endpoint {
+ remote-endpoint = <&rsnd_endpoint>;
+ };
+ };
+ };
+};
+
+&hscif0 {
+ pinctrl-0 = <&hscif0_pins>;
+ pinctrl-names = "default";
+
+ uart-has-rtscts;
+ status = "okay";
+};
+
+&hsusb {
+ dr_mode = "otg";
+ status = "okay";
+};
+
+&i2c4 {
+ clock-frequency = <400000>;
+ status = "okay";
+
+ versaclock5: clock-generator at 6a {
+ compatible = "idt,5p49v5923";
+ reg = <0x6a>;
+ #clock-cells = <1>;
+ clocks = <&x304_clk>;
+ clock-names = "xin";
+ };
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+&pcie_bus_clk {
+ clock-frequency = <100000000>;
+};
+
+&pfc {
+ pinctrl-0 = <&scif_clk_pins>;
+ pinctrl-names = "default";
+
+ hscif0_pins: hscif0 {
+ groups = "hscif0_data", "hscif0_ctrl";
+ function = "hscif0";
+ };
+
+ scif2_pins: scif2 {
+ groups = "scif2_data_a";
+ function = "scif2";
+ };
+
+ scif_clk_pins: scif_clk {
+ groups = "scif_clk_a";
+ function = "scif_clk";
+ };
+
+ sdhi0_pins: sd0 {
+ groups = "sdhi0_data4", "sdhi0_ctrl";
+ function = "sdhi0";
+ power-source = <3300>;
+ };
+
+ sdhi0_pins_uhs: sd0_uhs {
+ groups = "sdhi0_data4", "sdhi0_ctrl";
+ function = "sdhi0";
+ power-source = <1800>;
+ };
+
+ sdhi2_pins: sd2 {
+ groups = "sdhi2_data4", "sdhi2_ctrl";
+ function = "sdhi2";
+ power-source = <1800>;
+ };
+
+ sdhi3_pins: sd3 {
+ groups = "sdhi3_data8", "sdhi3_ctrl", "sdhi3_ds";
+ function = "sdhi3";
+ power-source = <1800>;
+ };
+
+ usb0_pins: usb0 {
+ groups = "usb0";
+ function = "usb0";
+ };
+
+ usb1_pins: usb1 {
+ mux {
+ groups = "usb1";
+ function = "usb1";
+ };
+
+ ovc {
+ pins = "GP_6_27";
+ bias-pull-up;
+ };
+ };
+
+ usb30_pins: usb30 {
+ groups = "usb30";
+ function = "usb30";
+ };
+};
+
+&rwdt {
+ timeout-sec = <60>;
+ status = "okay";
+};
+
+&scif2 {
+ pinctrl-0 = <&scif2_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&scif_clk {
+ clock-frequency = <14745600>;
+};
+
+&sdhi0 {
+ pinctrl-0 = <&sdhi0_pins>;
+ pinctrl-1 = <&sdhi0_pins_uhs>;
+ pinctrl-names = "default", "state_uhs";
+
+ vmmc-supply = <®_3p3v>;
+ vqmmc-supply = <&vccq_sdhi0>;
+ cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
+ bus-width = <4>;
+ sd-uhs-sdr50;
+ sd-uhs-sdr104;
+ status = "okay";
+};
+
+&sdhi2 {
+ status = "okay";
+ pinctrl-0 = <&sdhi2_pins>;
+ pinctrl-names = "default";
+
+ vmmc-supply = <&wlan_en_reg>;
+ bus-width = <4>;
+ non-removable;
+ cap-power-off-card;
+ keep-power-in-suspend;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ wlcore: wlcore at 2 {
+ compatible = "ti,wl1837";
+ reg = <2>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
+ };
+};
+
+&sdhi3 {
+ pinctrl-0 = <&sdhi3_pins>;
+ pinctrl-1 = <&sdhi3_pins>;
+ pinctrl-names = "default", "state_uhs";
+
+ vmmc-supply = <®_3p3v>;
+ vqmmc-supply = <®_1p8v>;
+ bus-width = <8>;
+ mmc-hs200-1_8v;
+ non-removable;
+ fixed-emmc-driver-type = <1>;
+ status = "okay";
+};
+
+&usb_extal_clk {
+ clock-frequency = <50000000>;
+};
+
+&usb2_phy0 {
+ pinctrl-0 = <&usb0_pins>;
+ pinctrl-names = "default";
+
+ vbus-supply = <&vbus0_usb2>;
+ status = "okay";
+};
+
+&usb2_phy1 {
+ pinctrl-0 = <&usb1_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&usb3_peri0 {
+ phys = <&usb3_phy0>;
+ phy-names = "usb";
+
+ companion = <&xhci0>;
+
+ status = "okay";
+};
+
+&usb3_phy0 {
+ status = "okay";
+};
+
+&usb3s0_clk {
+ clock-frequency = <100000000>;
+};
+
+&xhci0 {
+ pinctrl-0 = <&usb30_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
diff --git a/arch/arm/dts/hihope-rev4.dtsi b/arch/arm/dts/hihope-rev4.dtsi
new file mode 100644
index 0000000000..3046c07a28
--- /dev/null
+++ b/arch/arm/dts/hihope-rev4.dtsi
@@ -0,0 +1,124 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the HiHope RZ/G2H Rev.4.0 and
+ * HiHope RZ/G2[MN] Rev.3.0/4.0 main board common parts
+ *
+ * Copyright (C) 2020 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include "hihope-common.dtsi"
+
+/ {
+ audio_clkout: audio-clkout {
+ /*
+ * This is same as <&rcar_sound 0>
+ * but needed to avoid cs2000/rcar_sound probe dead-lock
+ */
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <12288000>;
+ };
+
+ wlan_en_reg: regulator-wlan_en {
+ compatible = "regulator-fixed";
+ regulator-name = "wlan-en-regulator";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ startup-delay-us = <70000>;
+
+ gpio = <&gpio4 6 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ x1801_clk: x1801-clock {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <24576000>;
+ };
+};
+
+&hscif0 {
+ bluetooth {
+ compatible = "ti,wl1837-st";
+ enable-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+&i2c2 {
+ pinctrl-0 = <&i2c2_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ cs2000: clk_multiplier at 4f {
+ #clock-cells = <0>;
+ compatible = "cirrus,cs2000-cp";
+ reg = <0x4f>;
+ clocks = <&audio_clkout>, <&x1801_clk>;
+ clock-names = "clk_in", "ref_clk";
+
+ assigned-clocks = <&cs2000>;
+ assigned-clock-rates = <24576000>; /* 1/1 divide */
+ };
+};
+
+&pfc {
+ i2c2_pins: i2c2 {
+ groups = "i2c2_a";
+ function = "i2c2";
+ };
+
+ sound_clk_pins: sound_clk {
+ groups = "audio_clk_a_a", "audio_clk_b_a", "audio_clkout_a";
+ function = "audio_clk";
+ };
+
+ sound_pins: sound {
+ groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data_a";
+ function = "ssi";
+ };
+};
+
+&rcar_sound {
+ pinctrl-0 = <&sound_pins &sound_clk_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ /* Single DAI */
+ #sound-dai-cells = <0>;
+
+ /* audio_clkout0/1/2/3 */
+ #clock-cells = <1>;
+ clock-frequency = <12288000 11289600>;
+
+ /* update <audio_clk_b> to <cs2000> */
+ clocks = <&cpg CPG_MOD 1005>,
+ <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
+ <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
+ <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
+ <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
+ <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
+ <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
+ <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
+ <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
+ <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
+ <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
+ <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+ <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+ <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
+ <&audio_clk_a>, <&cs2000>,
+ <&audio_clk_c>,
+ <&cpg CPG_CORE CPG_AUDIO_CLK_I>;
+
+ rsnd_port: port {
+ rsnd_endpoint: endpoint {
+ remote-endpoint = <&dw_hdmi0_snd_in>;
+
+ dai-format = "i2s";
+ bitclock-master = <&rsnd_endpoint>;
+ frame-master = <&rsnd_endpoint>;
+
+ playback = <&ssi2>;
+ };
+ };
+};
diff --git a/arch/arm/dts/hihope-rzg2-ex.dtsi b/arch/arm/dts/hihope-rzg2-ex.dtsi
new file mode 100644
index 0000000000..6233069282
--- /dev/null
+++ b/arch/arm/dts/hihope-rzg2-ex.dtsi
@@ -0,0 +1,93 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the RZ/G2[HMN] HiHope sub board common parts
+ *
+ * Copyright (C) 2020 Renesas Electronics Corp.
+ */
+
+/ {
+ aliases {
+ ethernet0 = &avb;
+ };
+
+ chosen {
+ bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
+ };
+};
+
+&avb {
+ pinctrl-0 = <&avb_pins>;
+ pinctrl-names = "default";
+ phy-handle = <&phy0>;
+ phy-mode = "rgmii-txid";
+ status = "okay";
+
+ phy0: ethernet-phy at 0 {
+ rxc-skew-ps = <1500>;
+ reg = <0>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+ reset-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&can0 {
+ pinctrl-0 = <&can0_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&can1 {
+ pinctrl-0 = <&can1_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&pciec0 {
+ status = "okay";
+};
+
+&pfc {
+ pinctrl-0 = <&scif_clk_pins>;
+ pinctrl-names = "default";
+
+ avb_pins: avb {
+ mux {
+ groups = "avb_link", "avb_mdio", "avb_mii";
+ function = "avb";
+ };
+
+ pins_mdio {
+ groups = "avb_mdio";
+ drive-strength = <24>;
+ };
+
+ pins_mii_tx {
+ pins = "PIN_AVB_TX_CTL", "PIN_AVB_TXC", "PIN_AVB_TD0",
+ "PIN_AVB_TD1", "PIN_AVB_TD2", "PIN_AVB_TD3";
+ drive-strength = <12>;
+ };
+ };
+
+ can0_pins: can0 {
+ groups = "can0_data_a";
+ function = "can0";
+ };
+
+ can1_pins: can1 {
+ groups = "can1_data";
+ function = "can1";
+ };
+
+ pwm0_pins: pwm0 {
+ groups = "pwm0";
+ function = "pwm0";
+ };
+};
+
+&pwm0 {
+ pinctrl-0 = <&pwm0_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
diff --git a/arch/arm/dts/r8a774a1-hihope-rzg2m-ex.dts b/arch/arm/dts/r8a774a1-hihope-rzg2m-ex.dts
new file mode 100644
index 0000000000..a5ca86196a
--- /dev/null
+++ b/arch/arm/dts/r8a774a1-hihope-rzg2m-ex.dts
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the HiHope RZ/G2M Rev.3.0/4.0 connected to
+ * sub board
+ *
+ * Copyright (C) 2020 Renesas Electronics Corp.
+ */
+
+#include "r8a774a1-hihope-rzg2m.dts"
+#include "hihope-rzg2-ex.dtsi"
+
+/ {
+ model = "HopeRun HiHope RZ/G2M with sub board";
+ compatible = "hoperun,hihope-rzg2-ex", "hoperun,hihope-rzg2m",
+ "renesas,r8a774a1";
+};
+
+/* SW43 should be OFF, if in ON state SATA port will be activated */
+&pciec1 {
+ status = "okay";
+};
diff --git a/arch/arm/dts/r8a774a1-hihope-rzg2m-u-boot.dts b/arch/arm/dts/r8a774a1-hihope-rzg2m-u-boot.dts
new file mode 100644
index 0000000000..e5872ee68c
--- /dev/null
+++ b/arch/arm/dts/r8a774a1-hihope-rzg2m-u-boot.dts
@@ -0,0 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source extras for U-Boot for the Hihope RZ/G2M board
+ *
+ * Copyright (C) 2020 Renesas Electronics Corporation
+ */
+
+#include "r8a774a1-hihope-rzg2m-ex.dts"
+#include "r8a774a1-u-boot.dtsi"
diff --git a/arch/arm/dts/r8a774a1-hihope-rzg2m.dts b/arch/arm/dts/r8a774a1-hihope-rzg2m.dts
new file mode 100644
index 0000000000..25ae255de0
--- /dev/null
+++ b/arch/arm/dts/r8a774a1-hihope-rzg2m.dts
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the HiHope RZ/G2M Rev.3.0/4.0 main board
+ *
+ * Copyright (C) 2020 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r8a774a1.dtsi"
+#include "hihope-rev4.dtsi"
+
+/ {
+ model = "HopeRun HiHope RZ/G2M main board based on r8a774a1";
+ compatible = "hoperun,hihope-rzg2m", "renesas,r8a774a1";
+
+ memory at 48000000 {
+ device_type = "memory";
+ /* first 128MB is reserved for secure area. */
+ reg = <0x0 0x48000000 0x0 0x78000000>;
+ };
+
+ memory at 600000000 {
+ device_type = "memory";
+ reg = <0x6 0x00000000 0x0 0x80000000>;
+ };
+};
+
+&du {
+ clocks = <&cpg CPG_MOD 724>,
+ <&cpg CPG_MOD 723>,
+ <&cpg CPG_MOD 722>,
+ <&versaclock5 1>,
+ <&x302_clk>,
+ <&versaclock5 2>;
+ clock-names = "du.0", "du.1", "du.2",
+ "dclkin.0", "dclkin.1", "dclkin.2";
+};
diff --git a/arch/arm/dts/r8a774a1-u-boot.dtsi b/arch/arm/dts/r8a774a1-u-boot.dtsi
new file mode 100644
index 0000000000..86be1af351
--- /dev/null
+++ b/arch/arm/dts/r8a774a1-u-boot.dtsi
@@ -0,0 +1,55 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source extras for U-Boot on RZ/G2 R8A774A1 SoC
+ *
+ * Copyright (C) 2020 Renesas Electronics Corporation
+ */
+
+#include "r8a779x-u-boot.dtsi"
+
+&extalr_clk {
+ u-boot,dm-pre-reloc;
+};
+
+/delete-node/ &audma0;
+/delete-node/ &audma1;
+/delete-node/ &can0;
+/delete-node/ &can1;
+/delete-node/ &canfd;
+/delete-node/ &csi20;
+/delete-node/ &csi40;
+/delete-node/ &du;
+/delete-node/ &fcpf0;
+/delete-node/ &fcpvb0;
+/delete-node/ &fcpvd0;
+/delete-node/ &fcpvd1;
+/delete-node/ &fcpvd2;
+/delete-node/ &fcpvi0;
+/delete-node/ &hdmi0;
+/delete-node/ &lvds0;
+/delete-node/ &rcar_sound;
+/delete-node/ &sdhi2;
+/delete-node/ &sound_card;
+/delete-node/ &vin0;
+/delete-node/ &vin1;
+/delete-node/ &vin2;
+/delete-node/ &vin3;
+/delete-node/ &vin4;
+/delete-node/ &vin5;
+/delete-node/ &vin6;
+/delete-node/ &vin7;
+/delete-node/ &vspb;
+/delete-node/ &vspd0;
+/delete-node/ &vspd1;
+/delete-node/ &vspd2;
+/delete-node/ &vspi0;
+
+/ {
+ /delete-node/ hdmi0-out;
+};
+
+/ {
+ soc {
+ /delete-node/ fdp1 at fe940000;
+ };
+};
diff --git a/arch/arm/mach-rmobile/Kconfig.64 b/arch/arm/mach-rmobile/Kconfig.64
index 07f607dd9d..2290be725f 100644
--- a/arch/arm/mach-rmobile/Kconfig.64
+++ b/arch/arm/mach-rmobile/Kconfig.64
@@ -4,6 +4,8 @@ menu "Select Target SoC"
config R8A774A1
bool "Renesas SoC R8A774A1"
+ imply CLK_R8A774A1
+ imply PINCTRL_PFC_R8A774A1
config R8A7795
bool "Renesas SoC R8A7795"
@@ -51,6 +53,15 @@ config TARGET_BEACON_RZG2M
select R8A774A1
select PINCTRL_PFC_R8A774A1
+config TARGET_HIHOPE_RZG2
+ bool "HiHope RZ/G2 board"
+ imply R8A774A1
+ imply SYS_MALLOC_F
+ imply MULTI_DTB_FIT
+ imply MULTI_DTB_FIT_USER_DEFINED_AREA
+ help
+ Support for RZG2 HiHope platform
+
config TARGET_CONDOR
bool "Condor board"
imply R8A77980
@@ -109,12 +120,15 @@ source "board/renesas/ebisu/Kconfig"
source "board/renesas/salvator-x/Kconfig"
source "board/renesas/ulcb/Kconfig"
source "board/beacon/beacon-rzg2m/Kconfig"
+source "board/hoperun/hihope-rzg2/Kconfig"
config MULTI_DTB_FIT_UNCOMPRESS_SZ
+ default 0x80000 if TARGET_HIHOPE_RZG2
default 0x80000 if TARGET_SALVATOR_X
default 0x80000 if TARGET_ULCB
config MULTI_DTB_FIT_USER_DEF_ADDR
+ default 0x49000000 if TARGET_HIHOPE_RZG2
default 0x49000000 if TARGET_SALVATOR_X
default 0x49000000 if TARGET_ULCB
diff --git a/board/hoperun/hihope-rzg2/Kconfig b/board/hoperun/hihope-rzg2/Kconfig
new file mode 100644
index 0000000000..ee422ba6c8
--- /dev/null
+++ b/board/hoperun/hihope-rzg2/Kconfig
@@ -0,0 +1,15 @@
+if TARGET_HIHOPE_RZG2
+
+config SYS_SOC
+ default "rmobile"
+
+config SYS_BOARD
+ default "hihope-rzg2"
+
+config SYS_VENDOR
+ default "hoperun"
+
+config SYS_CONFIG_NAME
+ default "hihope-rzg2"
+
+endif
diff --git a/board/hoperun/hihope-rzg2/MAINTAINERS b/board/hoperun/hihope-rzg2/MAINTAINERS
new file mode 100644
index 0000000000..e3702fd12e
--- /dev/null
+++ b/board/hoperun/hihope-rzg2/MAINTAINERS
@@ -0,0 +1,6 @@
+HIHOPE_RZG2 BOARD
+M: Biju Das <biju.das.jz at bp.renesas.com>
+S: Maintained
+F: board/hoperun/hihope-rzg2/
+F: include/configs/hihope-rzg2.h
+F: configs/hihope_rzg2_defconfig
diff --git a/board/hoperun/hihope-rzg2/Makefile b/board/hoperun/hihope-rzg2/Makefile
new file mode 100644
index 0000000000..5313031109
--- /dev/null
+++ b/board/hoperun/hihope-rzg2/Makefile
@@ -0,0 +1,9 @@
+#
+# board/hoperun/hihope-rzg2/Makefile
+#
+# Copyright (C) 2020 Renesas Electronics Corporation
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-y := hihope-rzg2.o
diff --git a/board/hoperun/hihope-rzg2/hihope-rzg2.c b/board/hoperun/hihope-rzg2/hihope-rzg2.c
new file mode 100644
index 0000000000..826a403178
--- /dev/null
+++ b/board/hoperun/hihope-rzg2/hihope-rzg2.c
@@ -0,0 +1,177 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * board/hoperun/hihope-rzg2/hihope-rzg2.c
+ * This file is HiHope RZ/G2M board support.
+ *
+ * Copyright (C) 2020 Renesas Electronics Corporation
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/gpio.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/rmobile.h>
+#include <asm/arch/rcar-mstp.h>
+#include <linux/libfdt.h>
+
+#define HSUSB_MSTP704 BIT(4)
+#define HSUSB_REG_LPSTS 0xE6590102
+#define HSUSB_REG_LPSTS_SUSPM_NORMAL BIT(14)
+#define HSUSB_REG_UGCTRL2 0xE6590184
+#define HSUSB_REG_UGCTRL2_USB0SEL 0x30
+#define HSUSB_REG_UGCTRL2_USB0SEL_EHCI 0x10
+
+#define RST_BASE 0xE6160000
+#define RST_CA57RESCNT (RST_BASE + 0x40)
+#define RST_CODE 0xA5A5000F
+
+/* If the firmware passed a device tree use it for U-Boot DRAM setup. */
+extern u64 rcar_atf_boot_args[];
+
+DECLARE_GLOBAL_DATA_PTR;
+
+void s_init(void)
+{
+}
+
+/*
+ * Routine: get_board_revision for RZ/G2
+ * Description: GP5_19 and GP5_21 are used to detect board revision for
+ * HiHope RZ/G2 rev3.0+ boards.
+ *
+ * Rev GP5_19 GP5_21
+ * ==============================
+ * Rev.3.0 0 0
+ * Rev.4.0 0 1
+ *
+ */
+static int get_board_revision_for_rzg2(void)
+{
+ int revision = 3;
+ struct gpio_desc rev_bit0, rev_bit1;
+ char *rev_bit0_gpio = "gpio at e605500021";
+ char *rev_bit1_gpio = "gpio at e605500019";
+
+ if (dm_gpio_lookup_name(rev_bit0_gpio, &rev_bit0) ||
+ dm_gpio_request(&rev_bit0, "rev_bit0")) {
+ printf("Cannot get GPIO5_21\n");
+ return revision;
+ }
+
+ if (dm_gpio_lookup_name(rev_bit1_gpio, &rev_bit1) ||
+ dm_gpio_request(&rev_bit1, "rev_bit1")) {
+ printf("Cannot get GPIO5_19\n");
+ return revision;
+ }
+
+ dm_gpio_set_dir_flags(&rev_bit1, GPIOD_IS_IN);
+ dm_gpio_set_dir_flags(&rev_bit0, GPIOD_IS_IN);
+ revision = 0x03 + ((dm_gpio_get_value(&rev_bit1) << 1) |
+ dm_gpio_get_value(&rev_bit0));
+ return revision;
+}
+
+static int get_board_revision(void)
+{
+ u32 cpu_type = rmobile_get_cpu_type();
+ int revision = 2;
+
+ if (cpu_type == RMOBILE_CPU_TYPE_R8A774A1) {
+ if (rmobile_get_cpu_rev_integer() == 1 &&
+ rmobile_get_cpu_rev_fraction() == 3)
+ revision = get_board_revision_for_rzg2();
+ }
+
+ return revision;
+}
+
+void clear_wlan_bt_reg_on(void)
+{
+ struct gpio_desc bt_power, wifi_power;
+ char *bt_power_gpio = "gpio at e605300013"; /* GP3_13 */
+ char *wifi_power_gpio = "gpio at e60540006"; /* GP4_06 */
+
+ if (get_board_revision() > 2) {
+ if (!dm_gpio_lookup_name(bt_power_gpio, &bt_power) &&
+ !dm_gpio_request(&bt_power, "bt_power")) {
+ dm_gpio_set_dir_flags(&bt_power, GPIOD_IS_OUT);
+ dm_gpio_set_value(&bt_power, 0);
+ } else {
+ printf("Cannot get BT Power GPIO3_13\n");
+ }
+
+ if (!dm_gpio_lookup_name(wifi_power_gpio, &wifi_power) &&
+ !dm_gpio_request(&wifi_power, "wifi_power")) {
+ dm_gpio_set_dir_flags(&wifi_power, GPIOD_IS_OUT);
+ dm_gpio_set_value(&wifi_power, 0);
+ } else {
+ printf("Cannot get WIFI Power GPIO4_06\n");
+ }
+ }
+}
+
+/* Kconfig forces this on, so just return 0 */
+int board_early_init_f(void)
+{
+ return 0;
+}
+
+int board_init(void)
+{
+ /* address of boot parameters */
+ gd->bd->bi_boot_params = CONFIG_SYS_TEXT_BASE + 0x50000;
+
+ /* USB1 pull-up */
+ setbits_le32(PFC_PUEN6, PUEN_USB1_OVC | PUEN_USB1_PWEN);
+
+ /* Configure the HSUSB block */
+ mstp_clrbits_le32(SMSTPCR7, SMSTPCR7, HSUSB_MSTP704);
+ /* Choice USB0SEL */
+ clrsetbits_le32(HSUSB_REG_UGCTRL2, HSUSB_REG_UGCTRL2_USB0SEL,
+ HSUSB_REG_UGCTRL2_USB0SEL_EHCI);
+ /* low power status */
+ setbits_le16(HSUSB_REG_LPSTS, HSUSB_REG_LPSTS_SUSPM_NORMAL);
+
+ clear_wlan_bt_reg_on();
+
+ return 0;
+}
+
+int fdtdec_board_setup(const void *fdt_blob)
+{
+ void *atf_fdt_blob = (void *)(rcar_atf_boot_args[1]);
+
+ if (fdt_magic(atf_fdt_blob) == FDT_MAGIC)
+ fdt_overlay_apply_node((void *)fdt_blob, 0, atf_fdt_blob, 0);
+
+ return 0;
+}
+
+int dram_init(void)
+{
+ return fdtdec_setup_mem_size_base();
+}
+
+int dram_init_banksize(void)
+{
+ return fdtdec_setup_memory_banksize();
+}
+
+void reset_cpu(ulong addr)
+{
+ writel(RST_CODE, RST_CA57RESCNT);
+}
+
+#if defined(CONFIG_MULTI_DTB_FIT)
+int board_fit_config_name_match(const char *name)
+{
+ /* PRR driver is not available yet */
+ u32 cpu_type = rmobile_get_cpu_type();
+
+ if (cpu_type == RMOBILE_CPU_TYPE_R8A774A1 &&
+ !strcmp(name, "r8a774a1-hihope-rzg2m-u-boot"))
+ return 0;
+
+ return -1;
+}
+#endif
diff --git a/configs/hihope_rzg2_defconfig b/configs/hihope_rzg2_defconfig
new file mode 100644
index 0000000000..1a77e140f7
--- /dev/null
+++ b/configs/hihope_rzg2_defconfig
@@ -0,0 +1,73 @@
+CONFIG_ARM=y
+CONFIG_ARCH_CPU_INIT=y
+CONFIG_ARCH_RMOBILE=y
+CONFIG_SYS_TEXT_BASE=0x50000000
+CONFIG_ENV_SIZE=0x20000
+CONFIG_ENV_OFFSET=0xFFFE0000
+CONFIG_DM_GPIO=y
+CONFIG_RCAR_GEN3=y
+CONFIG_TARGET_HIHOPE_RZG2=y
+# CONFIG_SPL is not set
+CONFIG_DEFAULT_DEVICE_TREE="r8a774a1-hihope-rzg2m-u-boot"
+CONFIG_SMBIOS_PRODUCT_NAME=""
+CONFIG_FIT=y
+CONFIG_USE_BOOTARGS=y
+CONFIG_BOOTARGS="root=/dev/nfs rw nfsroot=192.168.0.1:/export/rfs ip=192.168.0.20"
+CONFIG_SUPPORT_RAW_INITRD=y
+CONFIG_DEFAULT_FDT_FILE="r8a774a1-hihope-rzg2m.dtb"
+CONFIG_VERSION_VARIABLE=y
+CONFIG_HUSH_PARSER=y
+CONFIG_CMD_BOOTZ=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_PART=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_EXT2=y
+CONFIG_CMD_EXT4=y
+CONFIG_CMD_EXT4_WRITE=y
+CONFIG_CMD_FAT=y
+CONFIG_CMD_FS_GENERIC=y
+CONFIG_OF_CONTROL=y
+CONFIG_OF_LIST="r8a774a1-hihope-rzg2m-u-boot"
+CONFIG_MULTI_DTB_FIT_LZO=y
+CONFIG_MULTI_DTB_FIT_USER_DEFINED_AREA=y
+CONFIG_ENV_OVERWRITE=y
+CONFIG_ENV_IS_IN_MMC=y
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_SYS_MMC_ENV_DEV=1
+CONFIG_SYS_MMC_ENV_PART=2
+CONFIG_REGMAP=y
+CONFIG_SYSCON=y
+CONFIG_CLK=y
+CONFIG_CLK_RENESAS=y
+CONFIG_RCAR_GPIO=y
+CONFIG_DM_PCA953X=y
+CONFIG_DM_I2C=y
+CONFIG_SYS_I2C_RCAR_I2C=y
+CONFIG_SYS_I2C_RCAR_IIC=y
+CONFIG_DM_MMC=y
+CONFIG_MMC_IO_VOLTAGE=y
+CONFIG_MMC_UHS_SUPPORT=y
+CONFIG_MMC_HS400_SUPPORT=y
+CONFIG_RENESAS_SDHI=y
+CONFIG_BITBANGMII=y
+CONFIG_PHY_REALTEK=y
+CONFIG_DM_ETH=y
+CONFIG_RENESAS_RAVB=y
+CONFIG_DM_REGULATOR=y
+CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_DM_REGULATOR_GPIO=y
+CONFIG_SPECIFY_CONSOLE_INDEX=y
+CONFIG_SCIF_CONSOLE=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_GENERIC=y
+CONFIG_USB_STORAGE=y
+CONFIG_OF_LIBFDT_OVERLAY=y
+CONFIG_SMBIOS_MANUFACTURER=""
diff --git a/include/configs/hihope-rzg2.h b/include/configs/hihope-rzg2.h
new file mode 100644
index 0000000000..68a51176e3
--- /dev/null
+++ b/include/configs/hihope-rzg2.h
@@ -0,0 +1,20 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * include/configs/hihope-rzg2.h
+ * This file is HOPERUN HiHope RZ/G2 board configuration.
+ *
+ * Copyright (C) 2020 Renesas Electronics Corporation
+ */
+
+#ifndef __HIHOPE_RZG2_H
+#define __HIHOPE_RZG2_H
+
+#include "rcar-gen3-common.h"
+
+/* Ethernet RAVB */
+#define CONFIG_BITBANGMII_MULTI
+
+/* Generic Timer Definitions (use in assembler source) */
+#define COUNTER_FREQUENCY 0xFE502A /* 16.66MHz from CPclk */
+
+#endif /* __HIHOPE_RZG2_H */
--
2.17.1
More information about the U-Boot
mailing list