[PATCHv4 9/9] board: ge: b1x5v2: Add GE B1x5v2 and B1x5Pv2

[Tom Rini]

On Wed, Sep 02, 2020 at 07:31:46PM +0200, Sebastian Reichel wrote:

> GE B1x5v2 patient monitor series is similar to the CARESCAPE Monitor
> series (GE Bx50). It consists of a carrier PCB used in combination
> with a Congatec QMX6 SoM. This adds U-Boot support using device model
> everywhere and SPL for memory initialization.
> 
> Proper configuration is provided as 'ge_b1x5v2_defconfig' and the
> combined image u-boot-with-spi.imx can be flashed directly to 1024
> byte offset to /dev/mtdblock0. Alternatively SPL and u-boot.imx can
> be loaded separately via USB-OTG using e.g. imx_usb.
> 
> Signed-off-by: Sebastian Reichel <sebastian.reichel at collabora.com>

As I went checking for a good sized gap between kernel and dtb, and I
see it's got I was looking for:

Reviewed-by: Tom Rini <trini at konsulko.com>

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 659 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20200902/cf6bec7b/attachment.sig>