[PATCH 2/5] arm: dts: armada-cp110-master: update nand-controller

[Baruch Siach]

Align node properties to kernel dts node.

The change of compatible property does not affect any currently
supported board.

Keep U-Boot specific nand-enable-arbiter, and num-cs for compatibility
with the current driver.

Signed-off-by: Baruch Siach <baruch at tkos.co.il>
---
 arch/arm/dts/armada-cp110-master.dtsi | 15 +++++++++------
 1 file changed, 9 insertions(+), 6 deletions(-)

diff --git a/arch/arm/dts/armada-cp110-master.dtsi b/arch/arm/dts/armada-cp110-master.dtsi
index cd5c974482e6..7d0d31da306d 100644
--- a/arch/arm/dts/armada-cp110-master.dtsi
+++ b/arch/arm/dts/armada-cp110-master.dtsi
@@ -285,15 +285,18 @@
 			};
 
 			cpm_nand: nand at 720000 {
-				compatible = "marvell,mvebu-pxa3xx-nand";
-				reg = <0x720000 0x100>;
+				compatible = "marvell,armada-8k-nand-controller",
+					"marvell,armada370-nand-controller";
+				reg = <0x720000 0x54>;
 				#address-cells = <1>;
-
-				clocks = <&cpm_syscon0 1 2>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+				clock-names = "core", "reg";
+				clocks = <&cpm_syscon0 1 2>,
+					 <&cpm_syscon0 1 17>;
+				marvell,system-controller = <&cpm_syscon0>;
 				nand-enable-arbiter;
 				num-cs = <1>;
-				nand-ecc-strength = <4>;
-				nand-ecc-step-size = <512>;
 				status = "disabled";
 			};
 
-- 
2.28.0