[PATCH 5/5] arm: mach-omap2: am33xx: Add device structure for spi
Faiz Abbas
faiz_abbas at ti.com
Mon Sep 7 09:06:11 CEST 2020
Hi Lokesh,
On 07/09/20 12:08 pm, Lokesh Vutla wrote:
>
>
> On 02/09/20 4:48 pm, Faiz Abbas wrote:
>> Add platform data and a device structure for the spi device
>> present on am335x-icev2. This requires moving all omap3_spi
>> platform data structures and symbols to an omap3_spi.h so that
>> the board file can access them.
>>
>> Signed-off-by: Faiz Abbas <faiz_abbas at ti.com>
>> ---
>> arch/arm/mach-omap2/am33xx/board.c | 12 +++++
>> drivers/spi/omap3_spi.c | 70 +--------------------------
>> include/configs/am335x_evm.h | 4 ++
>> include/omap3_spi.h | 78 ++++++++++++++++++++++++++++++
>> 4 files changed, 95 insertions(+), 69 deletions(-)
>> create mode 100644 include/omap3_spi.h
>>
>> diff --git a/arch/arm/mach-omap2/am33xx/board.c b/arch/arm/mach-omap2/am33xx/board.c
>> index a7b56b6bb3..2c2b38721f 100644
>> --- a/arch/arm/mach-omap2/am33xx/board.c
>> +++ b/arch/arm/mach-omap2/am33xx/board.c
>> @@ -14,6 +14,7 @@
>> #include <init.h>
>> #include <net.h>
>> #include <ns16550.h>
>> +#include <omap3_spi.h>
>> #include <spl.h>
>> #include <asm/arch/cpu.h>
>> #include <asm/arch/hardware.h>
>> @@ -142,6 +143,17 @@ U_BOOT_DEVICES(am33xx_gpios) = {
>> #endif
>> };
>> #endif
>> +#if CONFIG_IS_ENABLED(DM_SPI) && !CONFIG_IS_ENABLED(OF_CONTROL)
>> +static const struct omap3_spi_plat omap3_spi_pdata = {
>> + .regs = (struct mcspi *)AM33XX_SPI_OFFSET,
>> + .pin_dir = MCSPI_PINDIR_D0_IN_D1_OUT,
>> +};
>> +
>> +U_BOOT_DEVICE(am33xx_spi) = {
>> + .name = "omap3_spi",
>> + .platdata = &omap3_spi_pdata,
>> +};
>> +#endif
>> #endif
>>
>> #if !CONFIG_IS_ENABLED(DM_GPIO)
>> diff --git a/drivers/spi/omap3_spi.c b/drivers/spi/omap3_spi.c
>> index 08daacf6f0..56cb217486 100644
>> --- a/drivers/spi/omap3_spi.c
>> +++ b/drivers/spi/omap3_spi.c
>> @@ -22,82 +22,14 @@
>> #include <malloc.h>
>> #include <asm/io.h>
>> #include <linux/bitops.h>
>> +#include <omap3_spi.h>
>>
>> DECLARE_GLOBAL_DATA_PTR;
>>
>> -#define OMAP4_MCSPI_REG_OFFSET 0x100
>> -
>> struct omap2_mcspi_platform_config {
>> unsigned int regs_offset;
>> };
>>
>> -/* per-register bitmasks */
>> -#define OMAP3_MCSPI_SYSCONFIG_SMARTIDLE (2 << 3)
>> -#define OMAP3_MCSPI_SYSCONFIG_ENAWAKEUP BIT(2)
>> -#define OMAP3_MCSPI_SYSCONFIG_AUTOIDLE BIT(0)
>> -#define OMAP3_MCSPI_SYSCONFIG_SOFTRESET BIT(1)
>> -
>> -#define OMAP3_MCSPI_SYSSTATUS_RESETDONE BIT(0)
>> -
>> -#define OMAP3_MCSPI_MODULCTRL_SINGLE BIT(0)
>> -#define OMAP3_MCSPI_MODULCTRL_MS BIT(2)
>> -#define OMAP3_MCSPI_MODULCTRL_STEST BIT(3)
>> -
>> -#define OMAP3_MCSPI_CHCONF_PHA BIT(0)
>> -#define OMAP3_MCSPI_CHCONF_POL BIT(1)
>> -#define OMAP3_MCSPI_CHCONF_CLKD_MASK GENMASK(5, 2)
>> -#define OMAP3_MCSPI_CHCONF_EPOL BIT(6)
>> -#define OMAP3_MCSPI_CHCONF_WL_MASK GENMASK(11, 7)
>> -#define OMAP3_MCSPI_CHCONF_TRM_RX_ONLY BIT(12)
>> -#define OMAP3_MCSPI_CHCONF_TRM_TX_ONLY BIT(13)
>> -#define OMAP3_MCSPI_CHCONF_TRM_MASK GENMASK(13, 12)
>> -#define OMAP3_MCSPI_CHCONF_DMAW BIT(14)
>> -#define OMAP3_MCSPI_CHCONF_DMAR BIT(15)
>> -#define OMAP3_MCSPI_CHCONF_DPE0 BIT(16)
>> -#define OMAP3_MCSPI_CHCONF_DPE1 BIT(17)
>> -#define OMAP3_MCSPI_CHCONF_IS BIT(18)
>> -#define OMAP3_MCSPI_CHCONF_TURBO BIT(19)
>> -#define OMAP3_MCSPI_CHCONF_FORCE BIT(20)
>> -
>> -#define OMAP3_MCSPI_CHSTAT_RXS BIT(0)
>> -#define OMAP3_MCSPI_CHSTAT_TXS BIT(1)
>> -#define OMAP3_MCSPI_CHSTAT_EOT BIT(2)
>> -
>> -#define OMAP3_MCSPI_CHCTRL_EN BIT(0)
>> -#define OMAP3_MCSPI_CHCTRL_DIS (0 << 0)
>> -
>> -#define OMAP3_MCSPI_WAKEUPENABLE_WKEN BIT(0)
>> -#define MCSPI_PINDIR_D0_IN_D1_OUT 0
>> -#define MCSPI_PINDIR_D0_OUT_D1_IN 1
>> -
>> -#define OMAP3_MCSPI_MAX_FREQ 48000000
>> -#define SPI_WAIT_TIMEOUT 10
>> -
>> -/* OMAP3 McSPI registers */
>> -struct mcspi_channel {
>> - unsigned int chconf; /* 0x2C, 0x40, 0x54, 0x68 */
>> - unsigned int chstat; /* 0x30, 0x44, 0x58, 0x6C */
>> - unsigned int chctrl; /* 0x34, 0x48, 0x5C, 0x70 */
>> - unsigned int tx; /* 0x38, 0x4C, 0x60, 0x74 */
>> - unsigned int rx; /* 0x3C, 0x50, 0x64, 0x78 */
>> -};
>> -
>> -struct mcspi {
>> - unsigned char res1[0x10];
>> - unsigned int sysconfig; /* 0x10 */
>> - unsigned int sysstatus; /* 0x14 */
>> - unsigned int irqstatus; /* 0x18 */
>> - unsigned int irqenable; /* 0x1C */
>> - unsigned int wakeupenable; /* 0x20 */
>> - unsigned int syst; /* 0x24 */
>> - unsigned int modulctrl; /* 0x28 */
>> - struct mcspi_channel channel[4];
>> - /* channel0: 0x2C - 0x3C, bus 0 & 1 & 2 & 3 */
>> - /* channel1: 0x40 - 0x50, bus 0 & 1 */
>> - /* channel2: 0x54 - 0x64, bus 0 & 1 */
>> - /* channel3: 0x68 - 0x78, bus 0 */
>> -};
>> -
>> struct omap3_spi_priv {
>> struct mcspi *regs;
>> unsigned int cs;
>> diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h
>> index 9c4ef369c5..db1a89ad30 100644
>> --- a/include/configs/am335x_evm.h
>> +++ b/include/configs/am335x_evm.h
>> @@ -281,6 +281,10 @@
>> #endif
>>
>> /* SPI flash. */
>> +#if CONFIG_IS_ENABLED(DM_SPI)
>> +#define AM33XX_SPI_BASE 0x48030000
>> +#define AM33XX_SPI_OFFSET (AM33XX_SPI_BASE + OMAP4_MCSPI_REG_OFFSET)
>
> Can we get the SPI base from DT?
>
We are doing that in U-boot (see the ofdata_to_platdata() callback in patch 4).
We need hardcoded static platdata for SPL. Was this not clear from the commit
message?
Thanks,
Faiz
More information about the U-Boot
mailing list