[PATCH v2 27/30] video: omap: set LCD clock rate through DM API

Dario Binacchi dariobin at libero.it
Sun Sep 6 14:16:48 CEST 2020


The patch configures the display DPLL using the functions provided by
the driver model API for the clock. The device tree contains everything
needed to get the DPLL clock. The round rate function developed for
calculating the DPLL multiplier and divisor and the platform routines
for accessing the DPLL registers are removed from the LCD driver code
because they are implemented inside the DPLL clock driver.

Signed-off-by: Dario Binacchi <dariobin at libero.it>
---

(no changes since v1)

 drivers/video/am335x-fb.c | 127 ++++++++++++++++++++++++++++++--------
 1 file changed, 101 insertions(+), 26 deletions(-)

diff --git a/drivers/video/am335x-fb.c b/drivers/video/am335x-fb.c
index 104f7891cc..021da5de3c 100644
--- a/drivers/video/am335x-fb.c
+++ b/drivers/video/am335x-fb.c
@@ -113,6 +113,27 @@ struct am335x_lcdhw {
 	unsigned int		clkc_reset;		/* 0x70 */
 };
 
+DECLARE_GLOBAL_DATA_PTR;
+
+#if !CONFIG_IS_ENABLED(DM_VIDEO)
+
+#if !defined(LCD_CNTL_BASE)
+#error "hw-base address of LCD-Controller (LCD_CNTL_BASE) not defined!"
+#endif
+
+/* Macro definitions */
+#define FBSIZE(x)	(((x)->hactive * (x)->vactive * (x)->bpp) >> 3)
+
+#define LCDC_RASTER_TIMING_2_INVMASK(x)		((x) & GENMASK(25, 20))
+
+static struct am335x_lcdhw *lcdhw = (void *)LCD_CNTL_BASE;
+
+int lcd_get_size(int *line_length)
+{
+	*line_length = (panel_info.vl_col * NBITS(panel_info.vl_bpix)) / 8;
+	return *line_length * panel_info.vl_row + 0x20;
+}
+
 struct dpll_data {
 	unsigned long rounded_rate;
 	u16 rounded_m;
@@ -120,8 +141,6 @@ struct dpll_data {
 	u8 rounded_div;
 };
 
-DECLARE_GLOBAL_DATA_PTR;
-
 /**
  * am335x_dpll_round_rate() - Round a target rate for an OMAP DPLL
  *
@@ -200,25 +219,6 @@ static ulong am335x_fb_set_pixel_clk_rate(struct am335x_lcdhw *regs, ulong rate)
 	return round_rate;
 }
 
-#if !CONFIG_IS_ENABLED(DM_VIDEO)
-
-#if !defined(LCD_CNTL_BASE)
-#error "hw-base address of LCD-Controller (LCD_CNTL_BASE) not defined!"
-#endif
-
-/* Macro definitions */
-#define FBSIZE(x)	(((x)->hactive * (x)->vactive * (x)->bpp) >> 3)
-
-#define LCDC_RASTER_TIMING_2_INVMASK(x)		((x) & GENMASK(25, 20))
-
-static struct am335x_lcdhw *lcdhw = (void *)LCD_CNTL_BASE;
-
-int lcd_get_size(int *line_length)
-{
-	*line_length = (panel_info.vl_col * NBITS(panel_info.vl_bpix)) / 8;
-	return *line_length * panel_info.vl_row + 0x20;
-}
-
 int am335xfb_init(struct am335x_lcdpanel *panel)
 {
 	u32 raster_ctrl = 0;
@@ -337,8 +337,49 @@ enum {
 struct am335x_fb_priv {
 	struct am335x_lcdhw *regs;
 	struct clk clkdm;
+	struct clk gclk;
+	struct clk dpll_m2_clk;
 };
 
+static ulong tilcdc_set_pixel_clk_rate(struct udevice *dev, ulong rate)
+{
+	struct am335x_fb_priv *priv = dev_get_priv(dev);
+	struct am335x_lcdhw *regs = priv->regs;
+	ulong mult_rate, mult_round_rate, best_err, err;
+	u32 v;
+	int div, i;
+
+	best_err = rate;
+	div = 0;
+	for (i = 2; i <= 255; i++) {
+		mult_rate = rate * i;
+		mult_round_rate = clk_round_rate(&priv->gclk, mult_rate);
+		if (IS_ERR_VALUE(mult_round_rate))
+			return mult_round_rate;
+
+		err = mult_rate - mult_round_rate;
+		if (err < best_err) {
+			best_err = err;
+			div = i;
+			if (err == 0)
+				break;
+		}
+	}
+
+	if (div == 0) {
+		dev_err(dev, "failed to find a divisor\n");
+		return -EFAULT;
+	}
+
+	mult_rate = clk_set_rate(&priv->gclk, rate * div);
+	v = readl(&regs->ctrl) & ~LCDC_CTRL_CLK_DIVISOR_MASK;
+	v |= LCDC_CTRL_CLK_DIVISOR(div);
+	writel(v, &regs->ctrl);
+	rate = mult_rate / div;
+	dev_dbg(dev, "rate=%ld, div=%d, err=%ld\n", rate, div, err);
+	return rate;
+}
+
 static int am335x_fb_remove(struct udevice *dev)
 {
 	struct video_uc_platdata *uc_plat = dev_get_uclass_platdata(dev);
@@ -346,6 +387,8 @@ static int am335x_fb_remove(struct udevice *dev)
 
 	uc_plat->base -= 0x20;
 	uc_plat->size += 0x20;
+	clk_release_all(&priv->gclk, 1);
+	clk_release_all(&priv->dpll_m2_clk, 1);
 	clk_release_all(&priv->clkdm, 1);
 	return 0;
 }
@@ -356,10 +399,10 @@ static int am335x_fb_probe(struct udevice *dev)
 	struct video_priv *uc_priv = dev_get_uclass_priv(dev);
 	struct am335x_fb_priv *priv = dev_get_priv(dev);
 	struct am335x_lcdhw *regs = priv->regs;
-	struct udevice *panel;
+	struct udevice *panel, *clk_dev;
 	struct tilcdc_panel_info info;
 	struct display_timing timing;
-	struct cm_dpll *const cmdpll = (struct cm_dpll *)CM_DPLL;
+	ulong rate;
 	u32 reg;
 	int err;
 
@@ -432,10 +475,42 @@ static int am335x_fb_probe(struct udevice *dev)
 		return err;
 	}
 
-	am335x_fb_set_pixel_clk_rate(regs, timing.pixelclock.typ);
+	err = uclass_get_device_by_name(UCLASS_CLK, "lcd_gclk at 534", &clk_dev);
+	if (err) {
+		dev_err(dev, "failed to get lcd_gclk device\n");
+		return err;
+	}
+
+	err = clk_request(clk_dev, &priv->gclk);
+	if (err) {
+		dev_err(dev, "failed to get %s clock\n", clk_dev->name);
+		return err;
+	}
 
-	/* clock source for LCDC from dispPLL M2 */
-	writel(0, &cmdpll->clklcdcpixelclk);
+	rate = tilcdc_set_pixel_clk_rate(dev, timing.pixelclock.typ);
+	if (IS_ERR_VALUE(rate)) {
+		dev_err(dev, "failed to set pixel clock rate\n");
+		return rate;
+	}
+
+	err = uclass_get_device_by_name(UCLASS_CLK, "dpll_disp_m2_ck at 4a4", &clk_dev);
+	if (err) {
+		dev_err(dev, "failed to get dpll_disp_m2 clock device\n");
+		return err;
+	}
+
+	err = clk_request(clk_dev, &priv->dpll_m2_clk);
+	if (err) {
+		dev_err(dev, "failed to get %s clock\n", clk_dev->name);
+		return err;
+	}
+
+	err = clk_set_parent(&priv->gclk, &priv->dpll_m2_clk);
+	if (err) {
+		dev_err(dev, "failed to set %s clock as %s's parent\n",
+			priv->dpll_m2_clk.dev->name, priv->gclk.dev->name);
+		return err;
+	}
 
 	/* palette default entry */
 	memset((void *)uc_plat->base, 0, 0x20);
-- 
2.17.1



More information about the U-Boot mailing list