[PATCH] board: xilinx: Enable changing default DTB pick up address

[Michal Simek]

čt 27. 8. 2020 v 13:54 odesílatel Michal Simek <michal.simek at xilinx.com> napsal:
>
> U-Boot on xilinx boards is checking one address where DTB can be placed as
> the first location for DTB. Originally this code was developed for Versal
> where QEMU was putting generated DTB for U-Boot to use.
> The patch enables changing this address which is necessary for cases where
> default address is pointing to location (DDR) which is not present. The
> access to this location can cause exception.
>
> Signed-off-by: Michal Simek <michal.simek at xilinx.com>
> ---
>
>  board/xilinx/Kconfig | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/board/xilinx/Kconfig b/board/xilinx/Kconfig
> index 73fc1be0141e..c80d0a881284 100644
> --- a/board/xilinx/Kconfig
> +++ b/board/xilinx/Kconfig
> @@ -41,7 +41,7 @@ config XILINX_PS_INIT_FILE
>  endif
>
>  config XILINX_OF_BOARD_DTB_ADDR
> -       hex
> +       hex "Default DTB pickup address"
>         default 0x1000 if ARCH_VERSAL
>         default 0x100000 if ARCH_ZYNQ || ARCH_ZYNQMP
>         depends on OF_BOARD || OF_SEPARATE
> --
> 2.28.0
>

Applied.
M

-- 
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Xilinx Microblaze
Maintainer of Linux kernel - Xilinx Zynq ARM and ZynqMP ARM64 SoCs
U-Boot custodian - Xilinx Microblaze/Zynq/ZynqMP/Versal SoCs